Training Coach
Doctrine
A report may cite any of these as doctrine-N.
doctrine-1Contract freeze and fingerprint disciplineThe policy I/O contract (observation layout, scales, history semantics, action pipeline) is frozen and fingerprinted; every exported policy is stamped and verified; contract changes ship as new versioned profiles that leave old artifacts bit-identical, and old policies run forever under their era's pinned profile.
Case. The 215-dim omni contract was frozen with a three-machine digest; the one contract-level extension (lateral feed-forward) went in as a new `omni_ff` profile with the old profile provably untouched, and the contract checker caught two real wiring bugs before any training (`contract-freeze-and-checker`). A silently changed gait-clock default would have fed old policies a 25% slower clock - closed by pinned legacy profiles (`legacy-profile-pinning`). A stale derived USD forked plant mass 2.2% until an automated source-vs-derived instrument gated it (`derived-asset-staleness-check`). A gain profile is part of the closed loop a policy was trained in and belongs in its stamp; the recovery line's anchored authority was left out of its manifest and recorded as the gap not to repeat (`gain-profile-belongs-in-the-stamp`), and a second policy behind a deploy-side switch made the handoff state itself a contract (`recovery-two-policies-and-a-state-machine`, `walk-recovery-fsm-handoff`).
Coach application. On any proposal touching obs/action semantics, defaults, or derived assets: demand the version/profile plan, the fingerprint update, and the checker extension in the same change; flag any old artifact that would run under new defaults.
doctrine-2Attribution by resolved training params - never eval-override knobsCapability differences between lineages are explained only by digging each lineage's *resolved* training configuration and eliminating columns; evaluation-side override knobs (kd-scale, power-scale, cycle-time) act on the plant for *every* policy and may serve as deployment mitigations but never as explanations.
Case. Low-friction robustness across 8 lineages x 3840 cells was traced to kd DR *bandwidth* - every lineage had ground friction pinned to (1.0,1.0), so "trained friction" could not be the axis; the parameter axis and the plant axis were explicitly separated after the first attribution conflated them (`kd-bandwidth-mu-law-attribution`). "Weak turning" on hardware was a power-scale plant effect, not a training gap (`deploy-knob-attribution-before-retraining`); slowing the deploy clock was out-of-distribution, not a feature (`cycle-time-override-is-ood`). The ground truth for what a run trained under is the logged per-run config, not the source tree (`resolved-config-is-source-of-truth`).
Coach application. Whenever asked "why is lineage A better", require the resolved-param table first; kill zero-variance columns; refuse explanations phrased in eval-knob terms; when a knob helps, label it deployment mitigation.
doctrine-3PASS gates become constraints; FAIL gates become objectivesOnce a skill passes its gate, that gate converts into a standing regression constraint (budget <= 2/20 against the parent baseline) for all later training; gates currently failing are the only legitimate objectives of the next rung.
Case. The C ladder ran one frozen 13-cell x 20-seed matrix at every rung with promotion = "new skill PASS and old skills within regression budget"; C1 was stopped and re-rooted precisely because it trained away the root's backward PASS (`fixed-acceptance-matrix-per-rung`, `preregistered-stop-criteria-per-rung`). The C4 product shipped only at 260/260 cells with zero regression.
Coach application. Keep the ledger: every PASS adds a constraint row; propose rungs only against FAIL rows; treat any constraint violation as stop-and-attribute, never "the next rung might win it back".
doctrine-4One variable per ladder rung - counted against what the checkpoint sawA rung changes one variable, where "one" is counted against the checkpoint's actual training state, not against the current config's diff; batching is allowed only when each change owns a disjoint symptom space with a pre-registered ablation order.
Case. Two rungs failed identically because resuming s1e-500 under the evolved config silently added four plant variables the checkpoint had never seen ("单变量纪律不只看「我改了什么」,还要看「checkpoint 见过什么」" - `resume-state-dr-audit`). v8 legally batched four orthogonal fixes with a written ablation order (`orthogonal-batch-with-ablation-order`); v9 spent one run completing a 2x2 factorial so either outcome convicted a factor (`fill-the-missing-factorial-cell`); v10b's three-way ablation wrongfully convicted the clock and had to be retried fairly.
Coach application. Before any resume: diff cfg against the checkpoint's logged training state. Before any batch: require the symptom-ownership map and ablation order in writing.
doctrine-5Pre-register risks, readings, and stop criteria before the ladderBefore a ladder or risky rung, write down the known risks, the interpretation of every plausible outcome, and hit-any-one stop criteria - frozen before training, tightened when priors say results should come fast.
Case. The C ladder opened with three numbered risks including the exact falsification condition for its own root choice; A/B arms carried "预注册读法(事后不改)" tables; a level expected to fail was run anyway for its pre-registered diagnostic value (`preregister-risks-and-fork-readings`). Stop criteria caught C4-redo rungs at +200 instead of full caps (`preregistered-stop-criteria-per-rung`); hardware sessions pre-registered per-config expected signatures and the disagreement rule "不改结论改账" (`preregistered-real-expectations`, `feasibility-accounts-lock-design-point`).
Coach application. Refuse to open a rung without the written risk/reading/ stop block; after results, read conclusions off the pre-registered table and flag any post-hoc reinterpretation.
doctrine-6Plant parameters are measured, never inventedEvery plant number carries measurement provenance: armature = N^2 x rotor inertia from no-load tests, friction split by rig and by API column, torque limits shaped by per-joint gait peaks, latency traced through the real pipeline, masses weighed - and DR bands are additive around the measured nominal, sized to the measured dispersion.
Case. Guessed friction was 2.5x low and guessed damping 5x high (`friction-measured-not-guessed`); armature had been 0 with a 9:1 gearbox (81x reflected inertia, `armature-n2-rotor-inertia`); a uniform torque derating was "the wrong shape" vs measured peaks (`torque-limit-shape-by-measured-peaks`); the delay implementation itself was a wrong plant for a whole lineage (`latency-lerp-reverse-extrapolation`); the run design point was locked by three accounts including the tau_limit/kd speed ceiling (`feasibility-accounts-lock-design-point`); identified friction had to land in the right simulator API columns to act at all (`sim-api-friction-columns`). The recovery and one-leg lines opened with the same kind of accounts before any reward existed - a connected static path and the torque along it for an armless get-up, and the gains single support needs to be holdable at all (`get-up-feasibility-accounts-before-training`, `single-support-gain-authority-probe`).
Coach application. For any plant value in a config review, ask "measured how?"; reject absolute ranges with no nominal; check API column mapping and derived-asset regeneration whenever measured values land.
doctrine-7Sim2sim gate before sim2real - under deployment conditionsEvery checkpoint passes a second, independently built simulator before hardware, and both the gate and the smoke loop run under the measured deployment conditions (real pipeline delay, honest contact parameters, the deployment gain/power profile).
Case. The standing order "先sim2sim 再sim2real" (`sim2sim-gate-before-sim2real`); acceptance flipped to match hardware only under measured condim/torsional friction (`eval-plant-honesty-contact-params`); gates moved permanently to `--delay 2` after the kicking incident (`pipeline-latency-is-plant-not-dr`); and the harness itself must be audited - a frame-convention bug in the cross-sim evaluator invalidated a whole line of verdicts (`body-frame-velocity-api-audit`). The recovery line's second simulator caught a torque penalty paid for by bracing the legs together (`torque-penalty-bought-by-leg-bracing`), and a 1.8x torque disagreement between the two plants stayed binding because its one surviving explanation was never tested (`torque-disagreement-between-simulators-unresolved`).
Coach application. Block any hardware request lacking a second-sim PASS at deployment conditions; when sim2sim and training-side metrics disagree, treat the evaluator as a suspect too.
doctrine-8Observation honesty - the actor's inputs are a hardware contractThe actor observes only signals the real robot produces with realistic noise; privileged truths go to the critic; history windows are estimators and must train under plant variation; rewards on quantities the actor cannot observe buy only average suppression, never closed-loop correction.
Case. Ground-truth velocity/forces went critic-only (`observation-honesty-critic-only`); frame_hist under zero DR memorized the trainer's plant fingerprint - 0/20 transfer (`history-obs-needs-plant-variation`); world-frame yaw rewards could not teach pull-back because heading is unobservable to the actor - correction was routed to the deploy outer loop instead of breaking the contract (`reward-observability-limit`, `deploy-heading-loop-and-align-training`).
Coach application. Audit every actor-obs element for hardware existence; require minimal plant jitter whenever history/recurrence exists; for each reward, ask "can the actor see this error?" and route correction tasks to outer loops.
doctrine-9Reward economics are audited in realized currencyReward design decisions are made on realized per-step magnitudes under the actual policy and command distribution: price the do-nothing optimum before adding a mode, compare achieved values to the computed ignore-floor, calibrate thresholds between measured healthy and sick distributions, and ship every new penalty with a withdrawal clause.
Case. feet_air_time at weight 2.0 realized 0.038 vs tracking 1.2 - drag was rational (`realized-contribution-audit`); ignoring a vy command cost 28-180x less than ignoring vx until a gated tracking term was added (`reward-cost-of-ignoring-audit`, `gate-new-reward-terms-by-command`); achieved-vs-floor separated "never learned" from "priced out" (`ignore-floor-diagnosis`); the foot-distance wall was placed between measured healthy (0.6% tax) and sick (55%) policies (`calibrate-threshold-between-healthy-and-sick`); the landing penalty carried a pre-registered stand-down condition and actually stood down (`calibration-threshold-with-withdrawal-clause`); two clearance terms were inert until zero-points and gate occupancy were checked (`inert-reward-term-audit`). A get-up policy sat because three gated terms paid the seated pose 84% of the return and the one term that could tell sitting from standing was an exp kernel reading 4.6e-5 at the real error (`seated-basin-dead-exp-kernel`); a torque-tail term was weighted by its measured steady value beside a peer term after the estimate proved 12x off (`tail-torque-needs-hinge-on-computed-demand`).
Coach application. Never discuss weights in the abstract: demand the realized-contribution table, the ignore-floor number, and the healthy-pay calibration before any reward edit is approved.
doctrine-10The zero-cost option must be the desired behaviorFor every penalty, name what the zero-cost option is; penalize failure events (slip, saturation excess, contact in flight windows), never the motion or joints that healthy behavior uses; make degenerate strategies fatal via termination where penalties cannot price them out.
Case. Joint-usage penalties for drift taxed a 1.4%-of-momentum channel 2.7/step and collapsed training; the slip penalty costs a non-slipping gait exactly zero (`penalize-the-slip-not-the-joint`). A frozen-at-clamp joint pays zero action-rate forever - only a pre-clip saturation penalty flips the cheat economics (`saturation-cheating-zero-rate-cost`). Ungated phase shaping made standing 42x more expensive than stepping and cooked the hip motors (`moving-gate-42x-stand-tax`); crouch-shuffling lived until a height termination deleted it (`termination-closes-degenerate-basin`). A gated penalty is an exit: the policy parked just outside an uprightness gate, then just under a height gate, to stop paying a stance tax, and only a positive band plus an always-on guard closed both (`penalty-gate-is-an-escape-hatch`); a soft-limit penalty that charged the standing pose itself bought a 4.1 deg lean (`soft-limit-penalty-charges-nominal-pose`); an unpriced foot attitude was spent on edge-standing (`unpriced-foot-attitude-is-a-free-variable`); and the one-leg line listed its cheapest cheats before training and still met one through a zero-gradient band (`enumerate-cheapest-cheats-before-training`, `binary-band-reward-fake-touchdown`).
Coach application. Run the "零代价的选项是什么" audit on every proposed term; convert motion taxes into event-conditional penalties; check the termination set against each known degenerate strategy.
doctrine-11Measurement discipline: independent referees, signs, distributionsA disputed measurement is adjudicated only by an independent algorithm from raw state; directional ability requires sign-antisymmetry under command reversal; bimodal metrics are reported as mode shares (never medians, never 3 seeds); ratios are not comparable when totals change; reward values compare only within one command distribution; single chaotic events never cross machines.
Case. The triple reversal - a good metric was "refuted" by a sibling metric that shared the disease (`independent-referee-for-metric-disputes`, `body-frame-velocity-api-audit`); same-signed +/- responses were bias, not turning (`same-sign-response-is-yaw-bias`); the swing median sat in a bimodal gap (`median-hides-bimodal-distribution`); "v6 is jitterier" died on absolute energies (`ratio-metrics-need-absolute-check`); yaw gain measured 15x wrong in an oscillating frame (`heading-integral-not-body-rate`); a 44% improvement evaporated under same-distribution comparison (`same-distribution-reward-comparison`); drift direction was a limit cycle (`multiseed-sign-test-for-drift`); a cross-machine push cliff was chaos (`single-impulse-recovery-is-chaotic`).
Coach application. Before accepting any surprising number: ask for the independent recomputation, the sign pair, the distribution shape, and the comparison conditions. Retract in writing when a metric falls.
doctrine-12The deployment pipeline is plantIrreducible pipeline properties - action latency, rate limits, power/torque scaling, teleop command mappings - are part of the nominal plant, modeled from day one and reproduced in every gate; deploy-side scalings are crutches that flag unmodeled plant, and they cannot be algebraically folded into training constants.
Case. Right-leg kicking was over-trained-delay x loop gain; power 0.8 was a gain-reduction crutch that retired when the delay was modeled (`pipeline-latency-is-plant-not-dr`); power derating damages non-forward axes first (`power-scale-hurts-nonforward-axes`); training at 0.4 scale as the "twin" of deploying 0.5 x 0.8 collapsed 0/20 (`deploy-scaling-not-training-equivalent`); one shared teleop speed sent an out-of-band lateral command and the robot clipped its own foot (`teleop-command-band-per-axis`); the latency DR range had not even covered the measured pipeline (`latency-dr-covers-measured-pipeline`). A rate limiter added at deployment only clipped a policy that kept commanding (`deploy-rate-limiter-windup`); moved into training and anchored on the last command it became an integrator in the balance loop (`slew-anchor-is-an-integrator`); anchored on the measured angle it bounded torque and kept the bandwidth (`beta-anchored-action-target`). The walking lines' safe setting, power-scale 0.8, cut the ends of the recovery policy's full-range travel and left its spikes alone; a gain inside the trained band did the job (`power-derating-cuts-full-range-contract`).
Coach application. Demand the measured pipeline latency/limits in the plant model and in gate conditions; treat every deploy-side derating as a question ("what is this compensating?"); block per-axis command sources that exceed training bands.
doctrine-13DR budget is finite; its distribution is the measured supportRobustness is a conserved budget: disturbance training on an already-hardened lineage borrows from existing margins; DR ranges span the measured deployment support - no fictitious tails (they buy degenerate gaits), no single constants (they allow thin-margin specialization); harden the plant only after the task distribution is final.
Case. The same push dose helped a narrow lineage and damaged a balanced one - budget conservation (`push-dr-conditional-budget-conservation`); wide latency tails bought drag-glide, constant values shipped 60% thinner tilt margins - the answer is a narrow band on the measured support (`dr-tail-plant-continuation`, `constant-value-dr-overfits-margin`); task-first ordering because hardening a soon-to-change task wastes budget (`task-shaping-before-plant-hardening`); COM randomization used deliberately as a behavior-shaping tool, and rolled back on symptom per its own contract (`com-randomization-forces-leg-spread`, `com-dr-rollback-on-symptom`). DR that is switched on can still be thin: the run policy fell in the frontal plane its gain-and-latency randomization never touched (`thin-dr-judged-by-channel-coverage`), and a friction priority settled under one action contract had to be re-measured under the next (`friction-priority-re-measured-after-plant-change`).
Coach application. Before any DR rung: check the untrained policy against the spec, the lineage's current DR load, and the measured real-world range; after it: audit retained margins, not just the new tolerance.
doctrine-14Gates measure what hardware feels: posture, margins, stripped assistsAcceptance batteries carry posture-class rows (tilt max median, per-joint L/R asymmetry, temperature) beside task rows, graded margin columns beside binary gates, chirality scored per side, at least one condition that removes the environment's free stabilization, and validated predictive scalars promoted into the gate.
Case. Three same-shaped judging errors - survival, displacement, wz-difference - all missed what the operator felt; posture metrics had the predictive power (`task-metrics-vs-posture-metrics`, `stand-gate-posture-not-survival`); binary survival saturated and hid a 60% margin gap (`constant-value-dr-overfits-margin`); v5 passed everything on the ground and failed suspended (`suspension-probe-removes-free-stabilizer`); the hip_roll (l+r) scalar predicted real drift direction and ordering and entered the battery (`hip-roll-sum-predicts-lateral-drift`); averages hide chirality (`chirality-scored-separately`); gait-quality gates are judged at speeds that demand a gait (`low-speed-commands-reward-dragging`). The recovery line added the rest of the kit: where failed episodes end, not only where they started (`end-state-confusion-matrix`); a frozen acceptance distribution with a pinned seed (`frozen-acceptance-distribution-and-pinned-seed`); video of the metric rollout itself (`video-as-acceptance-record`); and the admission that a 10 s episode cannot see a stance that fails after a minute (`episode-length-bounds-what-a-gate-sees`). The one-leg line removed a foot-spacing wall that no gate measured, and the feet met on hardware (`removed-wall-returns-on-hardware`).
Coach application. Review every battery for posture rows, margin columns, per-side scoring, and an assist-stripped condition; when operator feel and gates disagree, suspect the metric class first.
doctrine-15Fork and root selection: recoverability, maturity, frozen rewardsChoose fork roots by which candidate's deficits the coming training can pay back (precision is recoverable; lost plasticity, symmetry, and margins are not); prefer mature checkpoints as roots even when younger ones score better as products; never fine-tune through a reward change - continuation is legal only with the reward frozen and plant/DR widening one rung at a time.
Case. s1e-500 beat higher-precision candidates because its exclusive strengths were unrecoverable (`fork-root-recoverable-shortfall`); the b300 arm proved maturity is capital against adaptation shock (`root-maturity-vs-product-quality`); the B-arm scatter/half-recover/collapse signature falsified reward-change fine-tuning and drew the legal boundary for S2 continuation (`fine-tune-reward-change-falsified`).
Coach application. For root debates, build the exclusive-strengths table and ask "which side can be trained back?"; require dual-arm evidence for maturity claims; classify any proposed continuation as reward-frozen or not before approving.
doctrine-16Curricula: verified engagement, lineage counters, disease-phase gatingAutomatic curricula must prove they engage (a saturated ratchet is constant DR wearing a curriculum's name); every ramp counts lineage-cumulative progress, not per-process steps; penalties aimed at late-stage pathologies ramp in after exploration noise decays; difficulty rises on measured per-stratum success, never on schedule.
Case. The s1f ratchet capped at iter 248 and never engaged (`auto-curriculum-engagement-check`); the saturation ramp re-fired at +600 after every resume and no shipped product ever saw the penalty (`curriculum-counter-lineage-steps`); the same penalty worked once gated to the disease phase and became an untouchable mechanism (`gate-penalties-to-the-disease-phase`); record-high aggregate reward hid a fully-failing delay stratum (`aggregate-metrics-mask-subgroup-failure`); bucket share is not a gradient lever (`bucket-share-is-not-a-gradient-lever`). An assist curriculum keyed to a pooled success share was withdrawn on the strength of the categories that already worked (`curriculum-criterion-conditioned-on-lagging-category`); a pace set by per-step income moved only when that income was time-gated (`per-step-income-drives-speed-time-gate`), and the same gate had to be retired in a lineage without the disease (`time-gate-vs-wide-stance-retire-the-fix`).
Coach application. Ask every curriculum three questions: does it engage (show the internal state)? what does it count (process or lineage)? when is it present (against the pathology's phase)? Check where shipped checkpoints sit relative to every ramp.
doctrine-17Probe before training: feasibility first, hypotheses in tablesAfter two failed training attempts at a skill, stop training: demonstrate the behavior open-loop, enumerate hypotheses in a written table audited against actual configs cheapest-first, race one probe per side of the sim2real boundary for hardware-only pathologies, and use suspended tests to acquit or convict actuators before blaming authority.
Case. "在黑暗里试钥匙" - four sidewalk rungs failed until an open-loop probe separated exploration/waveform/authority in one experiment (`open-loop-probe-before-reward-tuning`); the foot-drag mystery fell to a seven-hypothesis config audit (`hypothesis-table-code-audit`); the period-doubling was resolved by racing a reward-side and a plant-side evidence line - and both paid off, one per sub-case (`period-doubling-evidence-race`); the suspended test acquitted the roll actuator in one measurement (`suspended-test-isolates-actuator-authority`). A read-only configuration probe told a wall from a slope in the recovery line's seated basin (`configuration-probe-wall-not-slope`), and the fix it pointed to - where the feet are - took prone from 0/159 to 158/159 (`prone-dead-end-is-foot-placement`); a knob that did not move its variable was recorded as no test of the idea (`dof-vel-penalty-is-not-a-pacing-knob`).
Coach application. When a skill resists training, prescribe the probe before any further reward edits; require verified target trajectories before imitation terms; keep a falsified-fixes list so closed roads stay closed (`amplitude-cut-falsified-yaw-fix`).
doctrine-18External advice is recomputed locally; values transfer as ratiosEvery external suggestion is classified adopt / already-have / modify / trap by recomputing its claim on the local reward table and probe data; numeric values transfer only as dimensionless ratios (to tracking weight, leg length, sqrt(gL), control rate); citations are verified to exist.
Case. "Start vy very small" would have destroyed sidewalk learning on this reward table - the gradient scales quadratically (`external-advice-audit-against-own-arithmetic`); swing-height targets and weights transferred correctly only through leg-length and tracking-ratio scaling (`transfer-ratios-not-absolutes`); the "6-step delay" was refused for lacking a control rate (`latency-dr-covers-measured-pipeline`); a borrowed reference's structure was FK-verified and its amplitude re-derived from the division of labor (`reference-structure-fk-amplitude-division`); retrieval agents fabricated verbatim arXiv quotes - only source-verifiable material was used; and one dismissed suggestion later proved right for a different mechanism, and was credited (`cycle-average-tracking-for-gait-quantities`). An advisor's staged state machine turned out to exist in none of the three papers it cited, and reading them changed the plan (`advisor-paraphrase-vs-paper`).
Coach application. Intercept every "paper X does Y" with the local recomputation; convert absolutes to ratios before comparison; verify quotes; revisit dismissed advice when new mechanisms appear.
doctrine-19Hardware sessions are scripted experiments, not tuning sessionsReal-robot time executes a pre-registered matrix: risk-ordered (baseline first, fragile last with a spotter), stage-gated (suspended smoke before ground), A/B sessions bracketed by a repeated reference run, operators briefed on measured zero-command and untrained-axis behavior, chirality-aware disturbance protocols, no field tuning - the only legal field changes are scripted, single-variable, and self-reversing.
Case. The S2 acceptance sheet (`risk-ordered-real-deployment`, `battery-bracketed-real-ab`, `know-zero-command-behavior`, `push-test-chirality-protocol`, `no-field-tuning-protocol`); the RAM-only torque experiment with automatic power-cycle rollback (`reversible-single-variable-field-experiments`); and the sim-veto rule - even sim's condemnations get one safeguarded hardware check when they judge the purpose-built configuration (`sim-veto-needs-real-confirmation`). The recovery line's first real run went ahead with its preconditions unmet and was stopped as dangerous (`first-real-get-up-violent-stage-one-policy`); after it: a staged hang, mat and floor protocol (`staged-hang-mat-floor-for-get-up`), a fixed power-cycle pre-flight and two-machine discipline (`power-cycle-preflight`, `two-machine-config-discipline`), a fall guard replaced rather than switched off (`fall-guard-becomes-a-state`), and logs that are part of the run (`hardware-log-is-the-attribution-input`).
Coach application. Turn every hardware request into a runbook with order, gates, brackets, briefing, and anomaly plays; refuse improvised parameter changes on the floor.
doctrine-20Close questions in writing; restart when the debt is structuralAudited questions get frozen verdicts with citable wording and an explicit reopening bar; hardware verdicts are dated by deployment-stack and calibration state and expire when those change; and when successive rungs shuffle symptoms without net progress, freeze the lineage as regression baselines, pay the structural debts, and retrain minimal - carrying laws and instruments, not weights.
Case. The chirality and COM questions were closed with frozen wording and "no reopening without new hard evidence" (`frozen-verdicts-semantic-boundaries`); v5/v6's condemnations expired with the deploy stack (`stale-verdicts-under-old-stack`); a 2-degree calibration fix moved the whole runnable envelope (`zero-offset-calibration-shifts-envelope`); plant upgrades are era boundaries with paired re-baselining (`plant-swap-invariants-vs-shifts`); and the 2026-08-05 reset froze v5-v11, fixed the latency FIFO / manifest / sampling / reward-table debts, and restarted - producing the lineage that reached hardware SOTA (`freeze-lineage-fix-structure-restart`, `minimal-reward-table-with-provenance`). The recovery line's real-robot verdicts ended up in three places that disagree, one of them an undated note in a command file (`write-hardware-verdicts-back`).
Coach application. Maintain the closed-questions ledger and quote it when symptoms recur; stamp verdicts with stack/calibration versions; when a team is three rungs into symptom-shuffling, raise the restart question explicitly with the freeze-fix-restart pattern.
doctrine-21Name the quantity in the space it lives inA goal, reward term or acceptance criterion about the feet, the base or the contact state is computed from the quantity itself - world poses, forces, per-category outcomes - never through a joint-angle, single-signal or pooled stand-in that assumes everything else sits at nominal; and every detector is validated on a behaviour known not to contain the event before it becomes a gate.
Case. The recovery line was caught three times: |ankle roll| as "flat feet" sold stance width and the real robot slid into the splits, a hip-roll criterion was confounded by 50 deg of yaw, and the joint table said 0.271 m where the feet were 0.159 m apart; task-space terms produced the first flat, wide stance (`joint-space-proxy-for-task-space-quantity`). Flight detection lied in both directions across two lines - foot height flagged 40% false flight on a walking gait, contact force alone flagged slip chatter as hops (`contact-detector-single-signal-lies`). A pooled height average described a robot that did not exist - six in ten standing, four in ten sitting (`zero-partial-credit-is-not-an-iteration-problem`) - and the walking line had learned the same lesson on yaw rate (`heading-integral-not-body-rate`).
Coach application. For every reward term and gate row, ask what physical quantity it stands for and whether it is measured directly; flag joint-space or single-signal stand-ins for task-space goals, ask for a detector validated on a negative control, and split pooled metrics by category before reading them.
doctrine-22Continuation needs a live gradient; a release is chosen by a scanContinue a converged policy only on a change that creates a live gradient, on a short budget, with every checkpoint scanned on the transfer axis; choose a release by running the full battery over a band of checkpoints and stop on signals, never by taking the last one; and when edits to the terminal phase cannot move a behaviour, roll back and retrain with the constraint present from the start, keeping the order in which the lineage acquired its mechanisms as explicit curriculum phases.
Case. A continuation with no new gradient drifted MuJoCo transfer from 100/98% to 80/28% while every Isaac gate stayed perfect, and a live-gradient continuation at the same depth kept it (`converged-continuation-is-poison`). One-leg checkpoints 100 iterations apart failed 1 and 38 of 40 cells, and late ones degraded (`checkpoint-choice-is-a-full-gate-scan`). Four in-lineage stance fixes failed because the stance was the end of the get-up path, and from scratch it grew right (`stance-decided-by-get-up-path`); fixes stacked on degraded states were rolled back by the user (`stop-stacking-roll-back-and-audit`); and the lineage's final recipe, trained from scratch in one run, sat at 0% because the order of its curriculum was part of the product (`curriculum-history-is-part-of-the-product`). The omni line's short adaptation budgets and mature roots are the same law seen from the other side (`continuation-budget-not-from-zero`, `root-maturity-vs-product-quality`).
Coach application. Before approving a continuation, ask for the new gradient, the budget and the transfer axis in the scan; before approving a release, ask for the scan; after three rungs without progress on the target, propose rolling back to the last good checkpoint and a from-scratch phase plan instead of a fourth patch.
Experience cards
91 cards matching “hip-roll-sum-predicts-lateral-drift”.
Reward fixes come in causal chains - foot height, then landing impact, then foot spacing
reward-chain-foot-height-landing-spacingPlan reward shaping as a chain, not a point fix: when you patch a degenerate gait behavior, pre-register which adjacent behavior the optimizer will exploit next and watch for it.
Symptom
Three problems appeared strictly in sequence: (1) swing feet lifted too low; (2) after fixing that, feet slammed down - "实际比视频里暴力得多" (far more violent in person than on video); (3) after fixing that, feet drifted too close together and collided.
Context
Each reward fix removed one degenerate optimum and exposed the next. The fix for foot spacing (COM lateral randomization +/-5 cm to force leg spread) itself caused base side-to-side sway, requiring a further foot-to-centerline distance penalty. Lucen had just solved its own foot-height problem (19mm -> 40mm swing height) and logged landing impact and foot spacing as the predicted next two problems.
Change
Chain of additions - (1) penalty when swing foot below 5 cm; (2) landing vertical-velocity penalty at touchdown; (3) COM lateral randomization +/-5 cm, then foot-centerline distance penalty to cancel the induced sway.
Outcome
Reference robot progressed through each stage; each individual fix worked and predictably surfaced the successor problem. For Lucen the chain served as a pre-registered roadmap of what breaks next.
Mechanism
Locomotion rewards are coupled through contact dynamics: raising swing height adds potential energy that must go somewhere at touchdown (impact); penalizing impact and forcing robustness to COM shifts changes lateral support strategy (spacing/sway). The optimizer always exploits the cheapest unpenalized channel, so fixing one channel routes the exploit to its neighbor.
Applies when
- adding a foot-height / clearance reward
- feet slam or landing impact grows after a clearance fix
- feet converge toward the centerline or self-collide
- any single-reward fix to a coupled gait behavior
“抬脚太低 → 加惩罚：摆动足低于 5 cm 就扣分 / 加完之后砸脚 → 抬起来了但落地极猛，"实际比视频里暴力得多" → 加落地速度惩罚 … / 两脚太近甚至互撞 → 先试质心横向随机化 ±5 cm … 有效但引发新问题——基座开始左右摇摆 → 再加足-中心线距离惩罚 … 这三条是串联的：每个修复都会暴露下一个问题。”
Experience.md § 三个问题的解法链 (lines 72-77) Four in-lineage attempts to widen the standing stance failed - remove a tax, add a joint-space knife, change the target, add a task-space metric penalty - because the stance was the end state of the get-up path; trained from scratch with the right terms it grew right from day one
stance-decided-by-get-up-pathA posture a skill ends in is shaped by the path the policy takes to reach it; if several single-variable edits to the terminal-phase reward cannot move it, stop editing that phase and retrain with the terminal constraint present from the start.
Symptom
v2_6c stood with its feet 0.159 m apart (task-space) and its hips yawed 45-47 deg the same way, which split on the real robot. Standing-phase reward edits did not move it.
Context
V2.7-A removed the flat-feet tax on compensated stances (stance unchanged); V2.7b added a hip-roll lower-bound hinge (+5 deg in 3,000 iterations, yaw ratchet); V2.8 changed the stand_pose target to a wide flat stance (stance unchanged, yaw not unwound, feet nearly overlapping, mu 0.4 transfer 2%); V2.9 penalized lateral spacing in metres (the policy parked just outside the penalty's gate in a lunge, 0% success). The v2_6c get-up goes through a split and closes the feet together as it rises.
Change
In-lineage stance surgery was formally closed. V3.1 trained from scratch with task-space stance terms present from the first iteration (and, after P1, a positive width band instead of a penalty).
Outcome
V3.1 P1b: lateral stance 0.364 m, foot tilt 0.0 deg, all four categories 100%, MuJoCo mu 1.0 and 0.4 both 100% - with a symmetric toe-out the kinematic audit had not enumerated. P1c (with a yaw guard): 0.355 m, all six acceptance criteria passing, mu 1.0-0.4 all 100%; it became the product.
Mechanism
A converged policy does not rebuild the path that produced its terminal posture; a standing-phase gradient only finds the nearest hack around the posture the get-up delivers.
Applies when
- the final posture of a transition skill is wrong and resists terminal-phase shaping
- repeated continuation rungs produce hacks instead of the intended posture
- deciding between another in-lineage fix and a from-scratch retrain
“窄站距 + yaw 扭是 v2_6c 起身策略(劈叉起身 → 双脚并拢收势)的**结构性 终态**,不是站立段的孤立参数 —— 站立形态由起身路径决定,在血统内只动 站立段奖励改不动它。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §44 结果:V2.8 判 FAIL —— 血统内站姿手术第三次证伪 Gate a new reward term by its command so all old modes score pointwise identical
gate-new-reward-terms-by-commandWhen a reward term must be added mid-lineage, gate it on the condition that defines the new task so every pre-existing situation scores exactly as before - and still watch for value-rescale pathologies inside the new mode.
Symptom
Adding a lateral tracking reward (track_lin_vel_y_exp) ungated would have paid 0-2.0 per step even in modes with cmd_vy = 0 (healthy gait sway of vy ~0.1 already earns 1.28), shifting the whole reward table by a large bias and rescaling the value function - no longer "just adding one mode".
Context
C4 was the C ladder's only true reward surgery. Single-variable discipline required that the change be invisible to every existing mode. The chosen construction: gate_by_cmd=True - the term pays only when |cmd_vy| > 0.02, so for all modes with cmd_vy == 0 the term is pointwise zero, i.e. the reward is pointwise identical to before the change. The same trick appeared earlier in C1: replacing the vy L2 tax with a command-error version that is "对 cmd_vy≡0 逐点同值" (pointwise equal when cmd_vy is 0), explicitly classified as not-a-reward-change.
Change
track_lin_vel_y_exp added with gate_by_cmd=True (weight +2.0, std 0.15); the residual acknowledged honestly - inside the side bucket the values DO change, so the rung still watched the known reward-reshuffle pathology signature (s1c B-arm: scatter -> half-recover -> collapse) as a stop criterion.
Outcome
Old modes provably unaffected (pointwise-equal argument); attribution for any change in old-skill metrics stayed clean through the C4 redo series.
Mechanism
PPO's critic normalizes to the reward scale it sees; an ungated additive term shifts returns in every state and re-scales advantages globally, entangling the new skill with all old ones. Command-gating confines the new term's support to the new mode's state distribution, making "pointwise identical elsewhere" a provable property rather than a hope.
Applies when
- adding a tracking/shaping term for a new command or skill to a lineage that must not regress
- reward change proposed while other skills are still being gated
- reviewing whether a config diff counts as a reward change
“只在 |cmd_vy| > 0.02 时付。不门控的话它对 cmd_vy≡0 的老模式也给 0~2.0 分（健康摇摆 vy≈0.1 → 1.28），等于给整张奖励表加一个大偏置、值函数尺度全变 … 门控后老模式逐点得 0 = 与加项前逐点同值，单变量纪律成立。… 但 side 桶内的值确实变了 —— 这仍是奖励表改版，开级盯 s1c B 臂签名”
train/C_LADDER_RUN.md § 3d. gate_by_cmd=True（重要） Removing a foot-spacing wall passed every simulated gate and made the feet collide on the real robot - nothing priced stance width in the two-foot phase, the policy narrowed to the simulator's self-collision floor, and real calibration offsets closed the last millimetres; the wall came back with a gate
removed-wall-returns-on-hardwareWhen a constraint is removed, name what will govern that quantity instead and add a gate for it; never let a simulator's collision floor be the margin, and when a gate is exceeded by a hair, record the exact numbers and hand the release decision to a person instead of quietly passing it.
Symptom
On the first real-robot try of oneleg_v0 (2026-09-16) the two feet collided; the user also judged the folded foot not high enough.
Context
The V0 reward table had dropped the feet_lateral_distance wall because it seemed to conflict with the hip adduction single support needs. In the two-foot command bucket no remaining term governed stance width, so the policy drifted narrower until the simulator's self-collision stopped it; the sim acceptance had no foot-spacing gate, so 40/40 said nothing about it. On the robot, calibration offsets consumed the margin.
Change
V0.1: the wall restored (-10, minimum 0.16 m), re-checked against measured numbers (a swing-phase lateral spacing of ~148 mm costs 0.12 per step, acceptable); fold weight 0.8 -> 2.0; a ninth gate: minimum foot spacing >= 100 mm and zero leg-contact frames. The removal was kept on record.
Outcome
oneleg_v0_1 (V0r2 model_2200) passed 39/40 with the spacing gate 40/40. The single miss (a 15.4 deg tilt transient against a < 15 deg limit during a side switch, steady 6.9 deg, everything else green) was recorded with its numbers and released for the user to overrule.
Mechanism
An unpriced degree of freedom drifts to wherever the simulator stops it; if that stop is the simulator's own collision model, the policy's margin on hardware is whatever the calibration error leaves.
Applies when
- dropping a reward term that looked redundant or conflicting
- hardware shows a failure no simulated gate measures
- a release candidate misses one gate row by a small amount
“V0 撤墙被真机证伪（2026-09-16）：双脚桶没有任何项管站宽，策略贴 sim 自碰撞底线收窄，真机标定偏差一吃**双脚相碰**。 … min ≥ 100 mm 且腿碰 0 帧（eval_straight 同判据）—— … V0 真机双脚相碰暴露 sim 门未看脚距的缺口 … L s2 标称 tilt 瞬态 15.4°（门限 <15, 超 0.4°, 稳态 6.9°, 该跑其余全绿）——换侧瞬态蹭线, 判定放行留档, 用户可否决。”
git:Lucen V2@origin/oneleg-line:train/ONELEG_V0_SPEC.md § §4 feet_lateral_distance 行 / §6 验收门 ⑨ / §8 核查单 7 Every new penalty ships with a pre-registered withdrawal clause - if healthy gait must pay above the cap, the term stands down
calibration-threshold-with-withdrawal-clauseIntroduce every new penalty with: the zero-cost-option audit, a replay-calibrated weight formula (healthy pays a fixed small fraction of tracking), and a pre-registered withdrawal condition - and let the clause fire without argument when the calibration says the term cannot be afforded.
Symptom
Three same-shaped crashes had established a failure archetype: v4's clearance, v8a's landing window (weight off by 58x uncalibrated), and v6a's bare hip_yaw suppression all combined a zero-cost "don't move" option with a fee on any motion - a reverse barrier that pushes policies toward standing still.
Context
The v11 landing-window penalty was therefore introduced under a calibration-threshold protocol: (1) shape chosen with the window tightened (h_gate 0.03 -> 0.02, because 0.03 equaled the clearance target and priced the entire descent); (2) weight from a FORMULA, not judgment: measure the term's raw value on healthy replays (v5/v10b), set w = -(0.10-0.15 x tracking reward) / raw_healthy; (3) withdrawal clause pre-registered: if healthy gait must pay >15% of tracking no matter the tuning, the term is withdrawn to the next version rather than forced in - "不硬上". The companion hip_yaw quieting term ran the same protocol (calibrate on replays, healthy pays <=5%) and was later retired entirely when a structural fix (zero action scale) made its shaping tax unnecessary.
Change
Penalty introduction protocol: shape audit (what is the zero-cost option?), replay-based weight formula, healthy-pay cap with a written stand-down condition - all before training.
Outcome
The landing term was in fact withdrawn under its clause (v12 records "P5 落地窗口罚 已撤 … 维持撤下"), demonstrating the protocol firing as designed instead of the fourth same-type crash.
Mechanism
A penalty's damage mode is mispricing healthy behavior; since the healthy price is measurable in advance on replays, both the weight and the go/no-go decision can be computed rather than discovered by a ruined training run. The withdrawal clause converts "make it work" pressure into a clean deferral.
Applies when
- adding any motion-taxing penalty to a working gait
- a proposed term's weight has no measurement behind it
- a previous same-shaped term crashed training
“权重公式而非拍脑袋:先在 v5/v10b 回放上量 h_gate=0.02 的原始值,w = −(0.10~0.15 × 跟踪奖励) / raw_健康;标定门槛:若健康步态无论如何要付 >15% 跟踪,本项撤下留 v12,不硬上 (v4 clearance/v8a-B/v6a 三次同型翻车的教训:代价为零的"不动"选项 + 一动就收费 = 反向壁垒)。”
train/WALK_V11_SPEC.md § 6. P5 —— 落地窗口罚(三代欠账,标定门槛制) When the training reset distribution changes, freeze the acceptance distribution separately and pin its seed - the same checkpoint measured twice differed by 3.8 and 10.2 points
frozen-acceptance-distribution-and-pinned-seedAcceptance distributions are frozen artifacts, decoupled from whatever the training distribution becomes and evaluated with a pinned seed, and every gate row carries its sample size so that a small-n row is never read as a regression.
Symptom
R0.3 added easier roll-arc start states to the training resets, and the acceptance script shared the training category table; separately, the same checkpoint scored side 3.8 points and mid 10.2 points differently on two runs of the same script.
Context
Acceptance ran 512 parallel envs drawn from the fall categories. Had it kept following the training table, 15% of acceptance samples would have landed on states easier than prone - inflated scores and generations that could not be compared. The two same-checkpoint runs had identical per-item height medians, so the ruler had not changed; the spread was reset resampling noise (side n ~ 169, sigma 2.3%; mid n ~ 35, sigma 8.3%). The spec's "20 seeds" had always meant controlled seeds.
Change
accept_recovery.ACCEPT_CATEGORIES pinned to the four R0-R0.2 categories and decoupled from the training FALL_CATEGORIES; --seed 20260809 pinned, after which two consecutive runs were bit-identical. The mid row (n ~ 35) was labelled the bluntest gate.
Outcome
Every later generation (R0.3 through V3.1) was scored on the frozen distribution and seed, which is what let R0.3's intermediate state be read as "no measurable gain" (62.7 -> 62.1%) and R0.2's mid drop be booked as noise rather than a regression.
Mechanism
An acceptance set that follows the training distribution measures a moving target, and an unpinned reset draw adds sampling noise that small-n rows cannot absorb.
Applies when
- the training reset or command distribution changes between generations
- repeated evaluations of one checkpoint disagree
- a small category drives a pass/fail decision
“**分布冻结**:`accept_recovery.ACCEPT_CATEGORIES` 钉死 §5 四类 … 与训练侧 `FALL_CATEGORIES` **解耦**。 … **side 差 3.8 点、mid 差 10.2 点**(h 中位逐项一致,证明不是尺子变了)—— 纯 reset 重采样噪声 … 钉死后两次连跑逐位相同。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §14 验收尺子的两处加固(R0.3 起生效,向后兼容) Anchoring the action on the measured joint angle (target = q + beta*a), with a beta curriculum down to tau_limit/kp, bounded torque by construction, removed the re-falls and later stood the robot up on hardware
beta-anchored-action-targetFor large-motion skills on position-controlled actuators, bound the action relative to the measured joint angle with a per-joint authority of tau_limit/kp, curriculum the authority down from full range, keep the curriculum state out of the observation and pin acceptance at the deployed authority - and make the deployment code refuse to run the anchored contract without a measured q.
Symptom
The V0 full-range absolute action produced violent targets; the V1 command-anchored rate limit made standing oscillate. Both failure modes came from how the action becomes a target.
Context
V2.0 (user approved, from scratch): BetaAnchorJointPositionAction, target = q_measured + beta_j(m)*a, memoryless per step. beta_j(m) = floor + m*(beta0 - floor), beta0 = the contract half-range (m = 1 reproduces V0 authority), floor = min(tau_limit/kp, beta0): hip_pitch 1.309 -> 0.40, knee 1.047 -> 0.40, hip_yaw -> 0.917, the other joints unchanged - the tightening lands exactly on the joints the V0 torque account convicted. m drops 0.1 per step when a standing-share EMA exceeds 0.35. beta is NOT in the observation, so the 45-dim contract is untouched; acceptance is pinned at m = 0 because the Python curriculum state is not saved in the checkpoint. The deployment chain got a new profile (recovery_v2: action_anchor current_q, explicit per-joint beta written into the contract, independent of the gain profile), and policy_io raises if q is missing rather than silently falling back to the absolute contract; the old profile's check reproduced its pre-change deviation bit for bit.
Change
New action term and beta curriculum; later the RS06 floor was lowered 0.40 -> 0.30 -> 0.25 (kp*beta 7.5 N*m) and the stamped deployment profile was synced to 0.25.
Outcome
First acceptance at m = 0 (v2_0b): re-falls 0% in every category, the torque gate passed for the first time on the line (worst 69.9%), knee jitter 0.004; supine 98.8 / side 88.8% with prone and mid still failing (fixed by the conditional pull curriculum). MuJoCo showed demand at or under the limits (hip_pitch 11.7/12 against V0's 26.8). Lowering beta cut impact (hip_pitch demand 9.7 -> 8.5 N*m) but barely slowed the get-up - it had become coordination-limited. Enabling the policy moves the target only +/-beta around the current pose, so there is no homing fling; the 08-11 real get-up and the later v3_1p1c both run on this contract.
Mechanism
kp*beta caps the proportional torque in a single step with no build-up delay and no memory, giving both a hard impact bound and full balance bandwidth.
Applies when
- a skill needs full joint range but hardware torque limits are low
- absolute position targets cause impacts or saturation
- changing the action semantics of a contract that deployed policies share
“**动作项** `BetaAnchorJointPositionAction`:`target = q_实测 + β_j(m)·a`, 逐步无记忆 … **Play/验收钉 m=0(= floor = 部署档)**:python 课程状态不进 checkpoint, Play cfg 显式 `beta_m_start=0` … 判读:**结构赌注兑现** —— 站姿零再摔 + 力矩账首过(kp·β 封顶按构造)”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §33 V2.0 预注册(2026-08-10,用户点头开工):β 锚定动作空间,从零训 Prone get-up sat at 0/159 until two gated hinge terms moved the seated feet - first sideways (561 -> 360 mm), then fore-aft (-168 -> +56 mm) - and success went to 158/159 with nothing else changed
prone-dead-end-is-foot-placementWhen a stuck state and a successful state differ geometrically, penalize the discriminating quantity with a gated hinge that is exactly zero in the state the policy actually reaches (measure it - not the nominal), then re-probe: flattening one axis can move the discriminant to another.
Symptom
Prone falls always righted and then sat with the feet splayed wide or tucked behind the hips, from where the policy never stood (0% for four generations).
Context
Four lines of evidence pointed at foot position: the configuration probe (ankles 215 mm apart stood 52.3%, 561 mm apart 0.0%); FK showing the action contract's nominal (a = 0) is itself a 465 mm straddle, so the action_rate and still terms were pulling toward the splits; biomechanics (feet tucked under the body cut peak hip-extension torque 148.8 -> 32.7 N*m, -78%); and HoST's foot-displacement term, which this reward table lacked. The earlier "not a reward hole" reading was corrected to "a gradient hole, not a level hole": at the dead point the heaviest term (upright) was saturated with zero gradient, still paid for not moving, and the one live gradient (base_height) pointed at the thigh-horizontal torque barrier. A prone ROM scan had already ruled out pushing up from prone.
Change
R0.4: feet_spread_excess = clamp(ankle distance - 0.215, 0, inf) x upright gate, weight -2.0, plus a height-decay factor added after measuring that the policy's real standing stance was 406 mm, not the 215 mm nominal (the plain version would have taxed every successful stand 0.38/s). R0.5: the same shape on the fore-aft axis, feet_fore_seated = |fore-aft offset - 0.05| x upright gate x height decay, target +50 mm (the measured natural offset of standing postures). One variable per rung.
Outcome
R0.4: seated ankle distance 561 -> 360 mm, supine/side exactly unchanged, prone 0 -> 1.9%, mid 45.9 -> 62.2%; a probe then showed the discriminant had moved to the fore-aft axis (standing starts +42 to +51 mm, the prone seat -168 mm). R0.5: supine 99.4, prone 99.4, side 100, mid 100%, re-falls 0%; both geometry terms collapsed to ~0 near iteration 13,100 as base_height rose, and the prone fore-aft offset went -168 -> +56 mm - the term's own target, closing the causal chain. The cost, unmeasured at the time: action jitter rose 33% (sum |da|^2 6.82 -> 9.06).
Mechanism
An upright-gated hinge is inert while the robot rolls and exactly zero in the achieved stance, so it adds gradient only inside the stuck basin; a seated robot with its feet behind or outside its COM must make a kinematically unfavourable transition to stand, and moving the feet under the body removes it.
Applies when
- a get-up or transition skill fails from one start category only
- successful and failed episodes differ in a measurable geometric quantity
- a shaping term might tax the posture successful episodes already use
“`recovery_r0_5`,唯一变量 = 追加 `feet_fore_seated`(与 R0.4 同形状,只换测量轴)。 … 对照 R0.4 的 prone(3.1%,360 mm,**−168 mm**):前后偏移从 −168 走到 +56, 正是这一项的目标量,**判别量被消掉后成功率随之到顶** —— 因果链完整。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §20 R0.5(前后向脚位置项):成功率门全过 —— prone 0/159 → 158/159 PPO's Gaussian noise cannot compose phase-locked oscillations - deliver them as feed-forward and let the policy learn the residual
feedforward-for-phase-locked-skillsIf a skill needs a temporally coherent (phase-locked) action component, do not expect step-wise exploration to find it: inject a verified feed-forward and train the policy as a residual stabilizer, keeping the feed-forward inside the deployment contract.
Symptom
Four different reward arrangements (no reference / wrong-sign reference / correct-sign reference / cage released) all failed to elicit sidewalk, while open-loop probes proved the behavior existed and was safe on the same platform with the same policy as base.
Context
Producing lateral velocity requires a phase-locked hip_roll oscillation synchronized to the gait clock. PPO's exploration is per-step, zero-mean, uncorrelated Gaussian noise - it can never compose a sustained phase-locked component, so the behavior is unreachable by exploration regardless of how it is rewarded. The fix changed the delivery channel: target = default + scale*action + lat_ff(cmd_vy, phi). The policy's action becomes a residual on top of the feed-forward, retaining full balance authority (it can even cancel the feed-forward); the feed-forward supplies exactly the component exploration cannot. This mirrors why the sagittal joint_pos_ref worked (it also delivered phase structure), just via a different channel.
Change
Contract-level change, done cleanly: new profile omni_ff (= omni + lat_ff_gain -0.5), existing omni profile bit-identical; feed-forward applied after the action delay stage; missing cmd/phase raises instead of silently dropping; deployment must use the same phi as build_obs (recomputing gives a one-tick phase misalignment).
Outcome
From C2-700, +100 iterations sufficed: product omni_c4_ff800 scored vy +120%/+125% (from +4%/-1%), 260/260 cells at 20/20 survival, zero old-skill regression, left/right gap 5 pp - the entire C4 saga resolved by changing the delivery mechanism, not the reward.
Mechanism
Exploration noise spans only the subspace its correlation structure can express; skills requiring coherent oscillation lie outside the span of i.i.d. per-step noise. Feed-forward moves the required structure into the action pipeline where it needs zero probability mass to appear, reducing the learning problem to stabilizing around a demonstrated behavior - which PPO does well.
Applies when
- a periodic/oscillatory skill trains flat under every reward variant
- open-loop injection of the behavior already works
- considering GRU/curriculum/exploration tricks for a rhythmic skill
“病因不在奖励，在探索形式：产生侧向速度需要相位锁定的 hip_roll 振荡，PPO 的逐步高斯噪声零均值无相关，合不出相位锁定分量。… target = default + scale·a + lat_ff(cmd_vy, φ)。策略动作因此是前馈之上的残差，保留全部平衡权限”
train/C_LADDER_RUN.md § 3j. C4-redo4：唯一变量 = 侧步参考改为前馈注入（契约级） Close a question with an audit, then freeze the wording - later symptoms may not reopen it without new hard evidence
frozen-verdicts-semantic-boundariesWhen an audit closes a hardware-vs-policy question, record the closing evidence, freeze a citable wording for future recurrences, and set the reopening bar explicitly; separate robustness perturbations from plant-truth questions so a DR rung's failure can never silently reopen a closed measurement.
Symptom
Recurring directional bias on the robot kept re-suggesting "maybe the hardware/COM/mechanics are asymmetric", threatening to re-litigate questions that audits had already closed - burning attention each time a descendant policy leaned or drifted.
Context
Two boundary decisions were written as permanent: (1) semantic separation - "S2④ COM ±20mm = 纯鲁棒性扰动,不再承担「解释真机后仰」任务" - if the COM-DR rung degrades, the ONLY allowed conclusion is "policy insufficiently robust to COM uncertainty"; reopening "is the CAD COM wrong" is forbidden because the mass audit was completed and closed (@63f9212). (2) a frozen wording for chirality, to be quoted verbatim whenever left/right bias appears in later rungs: observed directional bias = policy-level spontaneous symmetry breaking; plant asymmetry = no supporting evidence after the mass + model symmetry audit; mitigation candidate pi_sym queued, not blocking. The evidential basis was quantitative: the root policy was perfectly symmetric under +/-6 N*s pushes (40/40) while descendants broke (17/40, 13/40) - "手性是 S2 训练中获得的, 根没有; 机械侧已双 PASS 关案, 不重开".
Change
Closed questions carry (a) the audit commit that closed them, (b) a frozen citable wording for recurrences, and (c) an explicit evidence bar for reopening ("无新硬证据不得重开").
Outcome
Later chirality observations (C2's 15 pp turn gap, hip_roll drift bias) were handled as policy-lineage properties with policy-side mitigations, without a single hardware re-audit cycle.
Mechanism
Symptom classes recur under different guises; without a frozen verdict each recurrence re-runs the same expensive investigation and risks a different (worse-informed) conclusion. Freezing verdict plus wording converts recurring symptoms into citations, while the evidence bar keeps the closure honest rather than dogmatic - the root/descendant symmetry comparison is what makes "it's the training, not the machine" checkable at any time.
Applies when
- a recurring symptom keeps suggesting an already-audited hardware cause
- writing conclusions for a completed calibration/audit
- a DR rung's degradation invites re-measuring the plant
“若 S2④ 退化,结论只能是「当前 policy 对 COM 不确定性不够鲁棒」,不得重开「CAD COM 是不是错了」… 手性冻结表述 … Plant asymmetry: no supporting evidence after mass + model symmetry audit … 无新硬证据不得重开机械不对称”
train/OMNI_V0_SPEC.md § 4. 语义分界与手性冻结表述(2026-08-07 用户定,永久) Train with self-collisions ON (filtering nested-link ghost pairs) - the reward wall prevents, the physics makes cheating impossible
self-collision-physics-plus-reward-wallNever train a contact-risk behavior with self-collisions disabled; enable them with an audited filter list for nested/overlapping pairs (zero contacts across a pose sweep), record the fps cost, and keep a calibrated distance penalty as the preventive layer on top.
Symptom
walk_v8 logged 107 frames of leg-on-leg contact while still earning 0.751 tracking score - because training-side self-collisions were OFF, leg clipping was literally imperceptible to the policy ("碰腿在训练里 根本感知不到").
Context
Enabling self-collisions naively is its own trap: an Isaac audit had shown PhysX auto-filters adjacent bodies (base-hip clean for free) but nested links generate ghost forces - calf and ankle_roll overlap 65 mm at the zero pose, producing 12x body-weight phantom forces. The v10 recipe: enable self-collisions, explicitly filter only the two nested pairs (l/r calf-ankle_roll), then run a zero-contact audit at three poses (nominal stand, walk crouch, swing-extreme) requiring contact count = 0, adding any residual pair to the filter and re-auditing; a 500-iter sanity run for NaN and an fps-cost record (measured -8.8%). Redundancy with the reward-side foot-distance wall was argued, not assumed: "N2 离得远(奖励侧预防),SC 碰了疼(物理侧兜底)" - the reward keeps distance at range, the physics makes contact hurt - so the v8-style "clip legs and still score" outcome becomes physically impossible.
Change
enabled_self_collisions=True + 2-pair filter + three-pose zero-contact audit (re-verified at 0.00 N after the later mass update) + fps budget recorded.
Outcome
Leg contact entered the training signal; the audit protocol caught the nested-pair ghost-force hazard before it corrupted training; combined with the calibrated distance wall, later versions held contact = 0 on hardware and in sim.
Mechanism
A hazard absent from the training physics cannot be learned about, no matter the reward; but collision meshes that interpenetrate at rest inject large fictitious forces if enabled blindly. Filtered enabling plus a pose-swept zero-contact audit gives true contact physics with no phantom energy - and layering prevention (reward) with consequence (physics) covers both learning and enforcement.
Applies when
- real robot self-contacts while training scored it healthy
- enabling self-collisions on a model with nested collision meshes
- deciding between reward-side and physics-side fixes for clipping
“PhysX 自动过滤相邻体(base↔hip_pitch 免费干净),幽灵力只在 calf↔ankle_roll(零位嵌套 65mm,12 倍体重)。… 与 N2 互补不冗余:N2 离得远(奖励侧预防),SC 碰了疼(物理侧兜底)—— v8 那种 107 帧互碰拿 0.751 跟踪分的事从此物理上不可能。”
train/WALK_V10_SPEC.md § 4. SC —— 训练侧自碰撞(范围已探明,比想象便宜) Calibrate a wall penalty by measuring healthy and sick policies - healthy pays ~0, the disease pays a wall
calibrate-threshold-between-healthy-and-sickCalibrate every threshold penalty by evaluating its exact formula on replays of at least one healthy and one sick policy: place the threshold between their distributions, size the weight so the sick policy pays a decisive fraction of tracking while the healthy one pays ~0, and pre-compute neighboring thresholds for cheap adjustment.
Symptom
Real walk_v7 occasionally clipped its own legs (stance narrowed to 133 mm mean vs nominal 214.5); a foot-distance penalty was needed, but an uncalibrated threshold/weight risked either doing nothing or becoming a reverse barrier.
Context
The term (relu(d_min - lateral foot distance), measured in the base yaw frame because world-frame y is meaningless after turning) was calibrated before training by replaying three known policies through the exact reward formula at the acceptance operating point: healthy v5 (183 mm) pays 0.6% of tracking - effectively free; narrowed v7 (133 mm) pays 22% - effective widening pressure; collapsed v8 (93 mm) pays 55% - a wall. d_min 0.16 was placed deliberately between healthy and sick, with alternative thresholds (0.14/0.18) pre-computed in the tool output for later adjustment. The shape self-check was named as a standing question: "先问'零代价的选项是什么'" - the zero-cost region must be exactly the desired behavior.
Change
feet_lateral_distance added at d_min 0.16 / weight -10, with telemetry expectation pre-registered (should decay toward 0 as stance learns >160 mm; if bow-legged over-widening >214 appears, only then discuss an upper bound).
Outcome
v9_probe on hardware: no leg contact ("没碰腿(N2 兑现)"), stance min 145/126 mm green; the term's zero-cost design left healthy gait untaxed.
Mechanism
A relu threshold penalty defines a free region and a priced region; its correctness is entirely in where the boundary sits relative to the healthy and pathological distributions. Replaying known-good and known-bad policies through the exact formula measures both distributions in the term's own currency, making the threshold and weight a placement decision instead of a guess.
Applies when
- adding any relu/threshold-style wall penalty
- a safety margin (foot distance, joint limit, clearance) needs enforcement without taxing normal behavior
- choosing between candidate thresholds for a new term
“形状自检 (v6 横向组/v8-B 的教训 —— 先问"零代价的选项是什么"): 标称站距付 0, 健康步态付 ~0, 收窄才付费 … v5(健康) 183 mm … 0.6% ≈ 免费 | v7(收窄) 133 mm … 22% —— 有效推宽 | v8(塌陷) 93 mm … 55% —— 墙 … d_min=0.16 恰在 v5(183)与 v7(133)之间”
train/WALK_V9_SPEC.md § 2. N2 —— 脚距惩罚(已完成权重预标定) Model CAN polling skew - joint observations are 6-9 ms stale by read order
can-timing-skew-modelingIf joints are read sequentially over a shared bus, reproduce the per-group observation staleness in sim (or randomize it over the measured range) - synchronous observations are a privileged fiction.
Symptom
Policies trained with synchronous joint observations degrade on hardware where motors are polled sequentially over CAN - hip data is already 6-9 ms old by the time ankle data arrives.
Context
Menlo's core sim2real finding on a leg platform of almost identical mass to Lucen's. CAN is a sequential bus: one poll cycle reads motors in a fixed order, so the observation vector mixes timestamps. Lucen runs 6:6 motors on a dual CAN split, so the problem transfers one-to-one.
Change
Explicitly model CAN timing skew in sim: give the joint groups different observation delays matching physical read order. Menlo went further - running real firmware in the loop with a motor simulator between MuJoCo and firmware injecting 0.4-2 ms uniformly distributed delay.
Outcome
Reported by the reference team as their core sim2real enabler on a same-scale platform; recorded in Lucen's experience log as directly applicable ("这个问题一模一样").
Mechanism
A policy exploits any cross-joint temporal coherence present in training observations; when hardware breaks that coherence per bus position, the learned feedback acts on inconsistent state estimates, injecting phase error exactly at the control bandwidth.
Conflicts
Second-hand episode: outcome numbers are the reference team's report, not a Lucen-run experiment; Lucen adopted the requirement but the corpus has no Lucen A/B of skew-on vs skew-off.
Applies when
- robot polls actuators sequentially over CAN/RS485 or similar shared bus
- sim2real degradation appears as jitter or oscillation not seen in sim
- designing the observation/delay model before a training run
“电机走 CAN 是顺序轮询的，髋部电机的数据到踝部电机上报时已经陈旧了 6-9 ms，他们直接在仿真里显式建模了 CAN 时序偏斜，按读取顺序给三组关节不同的观测延迟。… 注入 0.4–2 ms 的均匀分布延迟。你们是 6:6 双 CAN 分总线，这个问题一模一样”
Experience.md § 执行器 + 时序建模 (line 6) Design the next run to complete the 2x2 - either outcome then convicts or acquits a factor cleanly
fill-the-missing-factorial-cellWhen two config factors are jointly suspected, lay out the factorial of existing evidence, spend one run on the missing cell with both interpretations and an early-abort tripwire written in advance - and treat either outcome as a verdict, not a disappointment.
Symptom
Hip joints froze at the action clamp in v7, but the history could not say whether the culprit was the raised action_rate (-0.2) or the halved reference amplitude (scale 0.15): existing versions covered only three corners of the (rate x scale) space - v5 (-0.03, 0.30) healthy, v6 (-0.03, 0.15) healthy, v7 (-0.2, 0.15) frozen.
Context
v9 was designed explicitly as the missing cell (-0.2, 0.30), with the readings pre-registered: v9 not frozen -> the real anti-freeze force was always the reference amplitude and -0.2 may stay; v9 frozen -> -0.2 is convicted beyond appeal (freezes at both amplitudes) and the next version goes straight to a structural fix. "两个结局都是干净的信息" - both endings are clean information.
Change
One training run allocated purely to complete the factorial, with freeze tripwires (joint_pos_ref telemetry <0.1 at iter 1000-1500 -> abort, do not run to 6000) so a conviction costs the minimum compute.
Outcome
v9 froze - the rate weight was convicted at both amplitudes ("−0.2 铁案定罪"), and v10 moved to the structural saturation fix with the weight question closed instead of re-litigated.
Mechanism
Three corners of a 2x2 leave the two factors confounded in the failure corner; the fourth observation makes each factor's marginal effect identifiable. Pre-registering both readings turns the run into a guaranteed-informative experiment regardless of outcome.
Applies when
- two config changes are confounded in a failure
- version history already covers some corners of a factor grid
- deciding what single experiment buys the most attribution
“这恰好补齐一个 2×2 实验矩阵的缺格 … v9 不冻 → 真正的抗冻结主力一直是参考摆幅,−0.2 可以留;v9 仍冻 → −0.2 铁案定罪(两种摆幅下都冻),v10 直接上结构修复 … 两个结局都是干净的信息。”
train/WALK_V9_SPEC.md § 0. 设计原则 (2×2 实验矩阵) A get-up policy righted itself and sat - three terms paid the seated pose 84% of the return, and the only shaping term that could tell sitting from standing was an exp kernel outputting 5e-5
seated-basin-dead-exp-kernelWhen a policy parks in a degenerate posture, tabulate what each reward term pays that posture against the target (watch contact terms that reward touching rather than bearing load) and evaluate every exp kernel at the error actually observed; a kernel narrower than the real error is switched off, and widening it is a one-variable repair that adds nothing new.
Symptom
R0 converged by iteration 700 and gained 1.7% over the next 2,300; success 0.0% in all four fall categories. Three of four success conditions passed (tilt median 1.0 deg, both feet in contact 99.6%, angular rate low); height passed 0.6% (median 0.204 m against 0.326). The robot knelt in a W-sit: hip yaw +/-47 deg, knees folded to 92% of the hard limit, shins flat, pelvis on the ground, torso vertical.
Context
Minimal reward table: upright (1-g_z)/2 +2.0, base_height linear progress +1.5, stand_pose exp(-||q-q_stand||^2/std^2) x upright gate +1.0 with std 1.0, still +0.5 and feet_on_ground +0.5 both x the upright gate, plus regularizers. The upright gate is a hinge that opens below 30 deg of tilt. The pre-registered fallbacks were then checked against the measured state: tightening the tilt gate was falsified (tilt was already 1.0 deg); a success bonus contradicted the spec's own no-cliff-bounty rule; narrowing the categories was useless (all four converged to the same pose); raising init noise was too weak for a basin this deep. Only a half-rise intermediate state addressed it, and a cheaper repair existed.
Change
R0.1 (user decision, single variable): stand_pose std 1.0 -> 3.0. Not a new term and not a bounty - repairing a declared term that was numerically dead. The two runs' logged env.yaml differ in log_dir and std only.
Outcome
R0.1 58.2% overall (R0 0.0%): supine 91.5%, side 82.2%, mid 55.9%, prone 0/156; knees fully straight; ||q-q_stand||^2 9.99 -> 0.91 and the stand_pose term 4.6e-5 -> 0.90; get-up ~1 s, no re-falls, the curve still rising at the 3,000-iteration cap. Prone stayed at zero and needed a different fix (see prone-dead-end-is-foot-placement).
Mechanism
Sitting earned upright 1.98/2.0, still 0.43/0.5 and feet_on_ground 0.46/0.5 - 3.0 of a 3.57 per-second return - because feet_on_ground asked for contact, not load. The only terms separating sitting from standing were base_height (+0.70/s for standing) and stand_pose, whose kernel at the real 9.99 rad^2 error (75% of it in the two knees) was exp(-9.99) = 4.6e-5 with a gradient near 1e-4. Standing up meant risking 3.0/s to gain 0.70/s while unfolding knees at 92% of their limit under load. With std 3 the same term is exp(-9.99/9) = 0.33 - a live gradient, three quarters of it on the folded knees.
Applies when
- a policy converges early to an upright but low, seated or kneeling pose
- a posture-matching exp term reads ~0 in the training logs
- contact-based rewards saturate while the task metric does not move
“**关键:`feet_on_ground` 只问"触地"不问"承重", 跪坐时双脚确实贴地,照样满分。** 三项 3.0/s = 总回报 3.57/s 的 84%。 … **exp(−9.99) = 4.6e-5** —— 权重 1.0 的项实际输出 5e-5、梯度 ~1e-4, **不是"还没学会",是数值上根本不存在**。 … **R0.1 决定(用户 2026-08-09 定,单变量)**:`stand_pose` 的 `std` **1.0 → 3.0**。 不是加新奖励、不是悬崖悬赏,而是**修复一个已声明但数值失效的项**”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §11 R0 首跑(recovery_r0, 2026-08-09):FAIL —— 翻正了但坐着 Two simulators disagreed 1.8x on one policy's torque demand - four explanations were eliminated with numbers, the surviving suspect was never tested, and neither reading was allowed to cancel the other
torque-disagreement-between-simulators-unresolvedWhen two simulators disagree on a safety-relevant quantity, eliminate the measurement explanations one at a time with numbers, name the survivor as a hypothesis, keep the pessimistic reading binding, and run the direct test (replay one action sequence open-loop through both plants) before the quantity is used to pass a gate for hardware.
Symptom
For R3.0, Isaac read hip_pitch torque demand at 75-80% of the limit (PASS); MuJoCo read the same policy at 148-152% (1.5x over the limit).
Context
Candidates were eliminated one by one: PD gains (identical, RS06 kp 30 / kd 1.5), the settle window (both skip the first 0.5 s), the statistic (worse-of-two-legs vs per-joint - explains ~15%), self-collision (the no-contact subset still read 152%), sampling (500 Hz peak vs 50 Hz sample - ~9%). About 1.8x remained. The prime suspect - Isaac's implicit actuator (PD solved inside the PhysX integration, chosen to mimic kHz firmware PD) against MuJoCo's 500 Hz explicit PD - was named but untested.
Change
The Isaac PASS was recorded as valid for the Isaac plant only; the prescribed decider was an open-loop replay of one action sequence through both plants, compared step by step, needing no training. It was upgraded to a precondition of R3.1.
Outcome
R3.1 ran in parallel with, not after, the replay, and the replay never appears as done. By §40 it was "the oldest open account" on the line, to be fed by real-robot logs - which the spec also never records. Meanwhile the 50 Hz sample under-read the peak by 34% as smoothing narrowed the spikes, so Isaac-side readings grew more optimistic exactly when the comparison mattered more.
Mechanism
Each measurement artifact explained a slice of the gap; what remained is a plant difference, and an untested plant hypothesis cannot license discarding the pessimistic simulator on a safety-relevant quantity.
Conflicts
The spec prescribes the open-loop replay (§23), upgrades it to an R3.1 precondition, then records that R3.1 ran in parallel without it (§24), and lists it as the oldest open account before hardware (§40); nothing through §50 (2026-08-14) records a result. Every later "torque gate PASS" on this line is an Isaac-plant reading plus a MuJoCo check, never a reconciled one.
Applies when
- Isaac and MuJoCo (or sim and hardware) report different torques, contacts or slips
- implicit vs explicit actuator models are in play
- a gate passes on one simulator only
“**同一个策略,一侧判 PASS 一侧判超限 1.5 倍。** … 口径项全部扣掉后仍剩 **~1.8×** 没有解释。 … 但**这条没有验证,不能拿它当结论去抵消 MuJoCo 的读数**。 … (做法:拿同一条 动作序列在两边开环回放,逐拍比 τ —— 不需要重训)”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §23 MuJoCo 复核门:成功率更稳,但 τ 与 Isaac 差 ~1.8× 没收敛 When the eval proxy has a known systematic bias, gate on within-proxy differences, not absolutes
relative-metrics-survive-proxy-biasWhere the evaluator is known-biased, design gates as within-evaluator contrasts (left vs right, A vs B, pre vs post) that cancel common-mode error; reserve absolute thresholds for quantities whose proxy calibration has been checked.
Symptom
MuJoCo systematically overestimated yaw turn gain (1.58/2.45 where Isaac measured 1.04/1.02), and friction alignment recovered only part of the gap (mu 1.0 -> 0.6 pulled it to 1.43/2.27) - so any absolute turn-gain acceptance threshold in MuJoCo would be judging the proxy's bias, not the policy.
Context
The acceptance criterion was rewritten to use only the left/right difference of the turn gain (standard: <20%): both directions pass through the same biased proxy, so the bias largely cancels in the difference while the policy's chirality - the thing being gated - survives. The absolute-gain row was dropped: "转向只判左右差,不判绝对值". A parallel task was still opened to align MuJoCo contact parameters to Isaac's (mu, restitution), since drift proved highly friction-sensitive (straight-line drift -65 deg at mu 1.0 vs +1 deg at mu 0.4) - bias reduction and bias-robust metrics proceeded together.
Change
Gate metric changed from absolute turn gain to left-right gain difference; proxy-alignment work scheduled separately rather than blocking acceptance.
Outcome
Turn acceptance became meaningful across proxy versions (v5 70% -> v6 19% difference measured the real improvement) while the absolute bias question was pursued without holding the ladder hostage.
Mechanism
A systematic multiplicative or additive proxy bias applies to both arms of a mirrored measurement; differencing (or ratioing) mirrored conditions cancels the common-mode bias to first order, leaving the asymmetry signal. Metrics built this way remain valid while the proxy is imperfect - which it always is somewhere.
Applies when
- a sim proxy disagrees with the trainer or hardware in absolute terms
- writing acceptance thresholds for direction-paired skills
- proxy calibration work would otherwise block a ladder
“转向只判左右差,不判绝对值 —— MuJoCo 的偏航增益系统性高估(实测 1.58/2.45 vs Isaac 1.04/1.02),摩擦只能解释一部分(μ 1.0→0.6 仅拉到 1.43/2.27)。差值是相对量。”
train/WALK_V5_SPEC.md § 6. 验收 The fallen-state reset was designed, not sampled from SO(3) - fixed category shares with jitter, a low drop that settles physically, equal left/right shares for mirror augmentation, and a numeric check before training
fallen-pose-reset-distributionBuild a fallen-start distribution from named, physically plausible categories with jitter and a settle phase, keep mirrored categories at equal probability, and check the realized shares and penetration numerically before spending a training run on it.
Symptom
A get-up policy can only learn from the fallen states its resets produce; uniformly random orientations produce ground-penetrating and limit-jammed states the robot can never be in.
Context
R0 reset_root_fallen: supine 30%, prone 30%, side_l 15%, side_r 15%, mid (random axis 50-125 deg) 10%, +/-15 deg jitter, full yaw, dropped from 0.28-0.40 m and left to settle under physics, joints uniform inside the soft limits with a 5% margin plus small random velocities. Random SO(3) was rejected (the advisor agreed). side_l and side_r must have equal probability because mirror augmentation turns a left fall into a right fall. The advisor had proposed supine and prone only for R0; the spec included side and mid because the feasibility accounts showed physical solutions for all of them, and wrote "narrow back to supine+prone" down as the first fallback. With no display on the training box the reset was checked numerically instead of by eye.
Change
Category mix as above; realized shares, settle height and penetration measured over 512 envs before the first run. A fallen-state bank (real falls, settled and stored) was pre-registered for R2.
Outcome
Realized shares 29.3/31.6/16.4/17.8% against the config, settle +0.262 m, final penetration 0/512 (a 0.10 m peak at the write instant, ankle links only, pushed out within 80 ms because the 0.28 m drop floor is shorter than a fully extended leg). R0's failure was a reward basin, not a reset artifact. The fallen-state bank stayed unbuilt through V3.1 (checklist item open); R0.3 later re-sliced the prone share into roll_l/roll_r bands, which is what forced the acceptance distribution to be frozen separately.
Mechanism
A category-structured, physically settled start distribution keeps training on states the robot can actually occupy, and equal mirrored shares keep mirror augmentation a pure doubling of data rather than a bias.
Applies when
- designing reset distributions for get-up, recovery or multi-contact skills
- mirror/symmetry augmentation is on and the task has chiral start states
- no viewport is available to inspect resets on the training machine
“角度 jitter ±15°、yaw 全域、0.28~0.40 m 低空放下由物理沉降,关节软限位内 均匀(留 5% 余量)+ 小随机速度。**不用 random SO(3)**(会采出穿地/极限卡死 等现实不可能状态,顾问同判) … side_l/side_r **概率必须相等**(镜像增强的样本同分布前提)”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §3 R0 任务定义 / §9 核查单 Freeze the deployment contract, stamp every export, and let an automated checker catch wiring bugs
contract-freeze-and-checkerFreeze and fingerprint the policy I/O contract; ship contract changes as new versioned profiles that leave old artifacts bit-identical; and extend the automated contract checker with every pipeline change, forcing the new path to execute in the check.
Symptom
Contract-level changes (observation layout, action pipeline) are where silent sim/real divergence is born; two real wiring bugs appeared the one time the action pipeline was extended.
Context
The 215-dim observation contract was frozen ("纪元 3，三机 digest" - an era number plus a digest agreed across three machines); proposals that would break it (e.g. a GRU memory) were rejected on contract grounds. Every exported ONNX is stamped and verified with a manifest (onnx_manifest --stamp / --verify), and deployment refuses mismatched combinations. When C4 added the lateral feed-forward, it went in as a NEW profile (omni_ff) leaving the existing omni profile's behavior bit-identical; the checker (check_contract) was extended to force the feed-forward path to actually execute (cmd_vy=0.13) and promptly caught two genuine bugs: (1) re-clamping with soft_joint_pos_limits after the feed-forward (0.23 rad deviation) instead of reusing the parent's clip; (2) indexing processed actions by asset.joint_names instead of the action term's own contract-ordered _joint_names, which landed the feed-forward on the wrong joints (l_hip_yaw / r_ankle_pitch).
Change
Contract discipline as implemented: frozen dims + digest; manifest stamping and refusal; contract changes only via new versioned profiles; checker updated in the same commit as any pipeline change, with inputs chosen so new code paths are exercised.
Outcome
Both wiring bugs caught before any training or deployment ("两个都是 check_contract 当场抓出来的 —— 这次它值回票价"); old deployments provably unaffected by the new profile.
Mechanism
The contract is the only interface the policy and robot share; freezing plus fingerprinting makes divergence detectable, and an executable checker turns "the contract holds" from a belief into a test - but only if its inputs actually drive the new code path.
Applies when
- modifying the action or observation pipeline of a deployed policy
- exporting policies for hardware
- proposals that would change observation dims or history structure
“契约校验抓到的两个真错误（记账，别再犯）：1. 前馈后误用 soft_joint_pos_limits（URDF 限位 ×0.9）重钳 → 0.23 rad 偏差 … 2. 用 asset.joint_names 索引 _processed_actions → 前馈落到 l_hip_yaw/r_ankle_pitch 上 … 两个都是 check_contract 当场抓出来的 —— 这次它值回票价。”
train/C_LADDER_RUN.md § 3j. 契约级改动 / 契约校验抓到的两个真错误 A nonzero response with the same sign for + and - commands is bias, not ability
same-sign-response-is-yaw-biasBefore crediting any directional skill, test both command signs: response must flip sign with the command; a same-signed pair is a bias to subtract, not an ability to report.
Symptom
Root-selection probe showed nonzero wz "tracking percentages" on turn commands, tempting the read that candidates could partially turn.
Context
During C-ladder root selection, s1e-500's measured yaw rate was +0.084 rad/s for cmd +0.3 and +0.093 rad/s for cmd -0.3 - same sign both ways. The same check on the C2 baseline gave wz+0.20 -> -0.13 and wz-0.20 -> +0.12 (again same sign), while the alternative root s2e_pd-1400 gave +0.16 / -0.16 - opposite signs, i.e. a genuine 16% command response.
Change
Reading corrected and written into the execution sheet: percentages on directional commands are meaningless unless the +cmd and -cmd responses have opposite signs; all three candidates were re-classified as "cannot turn, cannot sidewalk - C2/C3/C4 learn from zero". Acceptance criteria thereafter required "tracking >=50% AND left/right opposite-signed".
Outcome
Prevented crediting turn/sidewalk ability that did not exist; the antisymmetry clause became a standing part of every turn and sidewalk PASS condition (C2, C4, C4-redo levels all carry "且左右反号").
Mechanism
A constant yaw (or lateral) bias projects onto any command's sign convention and shows up as fake fractional tracking; only sign-antisymmetry under command reversal distinguishes a feedback response to the command from an open-loop offset.
Applies when
- evaluating turn/sidewalk/any signed-command tracking percentages
- a candidate shows partial tracking on an axis it was never trained on
- writing PASS criteria for a new directional skill
“C2/C3 那些非零的 wz 百分比不是转向能力 —— 转向+ 与 转向− 的实测同号（s1e：cmd +0.3 → +0.084，cmd −0.3 → +0.093 rad/s），那是恒定偏航偏置。… 三个候选都不会转、都不会侧走。”
train/C_LADDER_RUN.md § 0. 读数纠正（重要，别引错） Privileged signals (true velocity, foot force, foot height) go to the critic only
observation-honesty-critic-onlyTreat the actor observation vector as a hardware contract: every element must exist on the real robot with realistic noise; privileged simulator truths belong in the critic only.
Symptom
Policies trained on ground-truth base linear velocity work in sim and fail on hardware, where only a drifting IMU and encoders exist - the policy has learned to depend on a signal that does not survive deployment.
Context
Many open-source locomotion stacks feed simulator ground-truth linear velocity to the actor. The reference team refused: the real robot has no ground-truth velocity. Asymmetric actor-critic keeps the training benefit of privileged information without deploying the dependency.
Change
Route ground-truth velocity, foot contact forces, and foot heights to the critic only; the actor observes exclusively signals that exist on hardware (IMU-derived quantities, encoders, commands, previous actions).
Outcome
Recorded as adopted doctrine in Lucen's experience log; the trained actor's input contract matches what the real robot can actually produce.
Mechanism
The critic is discarded at deployment, so it may consume any privileged state to reduce value-estimation variance; the actor's observation set is a deployment contract - anything in it that hardware cannot supply (or supplies with different noise/drift) becomes a train/deploy distribution shift the policy was never trained to handle.
Applies when
- designing actor/critic observation spaces
- reviewing a config where the actor sees base_lin_vel or contact forces
- sim policy is strong but real robot drifts, oscillates, or falls without obvious actuator cause
“很多开源代码库把真值线速度喂给策略，Asimov 团队没有，因为真机上没有真值速度，只有会漂的 IMU 和编码器；用完美速度训练出来的策略会依赖它，然后在硬件上失效。真值速度、足底力、足高统统只给 critic”
Experience.md § 观测空间的诚实性 (line 7) Every power cycle starts with the same read-only pre-flight - read the buses, check the torque limits against 12/17/11, verify the IMU axes, check the ports after any new USB device - and any reassembly re-measures the joint zeros
power-cycle-preflightStart every powered session with a fixed, read-only pre-flight - bus responses, torque limits equal to the simulated ones, IMU axes, device identities - and re-measure joint zeros after any mechanical reassembly before running a policy.
Symptom
Hardware state drifts between sessions in ways no policy can see: a motor that stops answering after a power cycle, a torque limit that differs from the one simulated, an IMU axis flipped, two USB devices swapping identities, a joint zero moved by reassembly.
Context
The runbook's session order before any policy runs: read every motor on both CAN buses without enabling them (the first command after every power cycle); set_torque --check, all twelve motors must read 12/17/11 N*m, and any difference is written back; imu_reader --verify-axes, where the operator tilts the robot forward and to the right and every check must pass before continuing; check_ports after plugging in any new USB device (the IMU and a CAN adapter once collided on USB identity). After re-mounting motors: read the buses, then re-measure the calibration offsets (three repeats, written back) - "skipping it means running everything on the wrong zero". Hanging checklists repeat the torque-limit check (the deploy script also self-checks at start).
Change
A fixed, read-only pre-flight run in the same order every session.
Outcome
The runbook records one earlier hardware check in the same spirit: all 12 motors' implied kp fell within 18.4-22.0 for a commanded 20, inside the kp randomization range used in training.
Mechanism
A policy transfers only if the plant matches the one it was evaluated on; the pre-flight turns silent hardware drift into a failed check before the robot moves.
Applies when
- the first command after powering a robot on
- after swapping adapters, cables or motors
- a policy that worked last session suddenly behaves differently
“python tools/set_torque.py --check # 12 颗应全对 12/17/11, 有 diff 就 --write … 插任何新 USB 设备后都先跑一次 check_ports.py(IMU 和 CANable 的 USB 身份撞过车) … python tools/calib_stance.py --repeat 3 --write # 重标 offset —— 8/9/10 重新装, 机械零位变了”
RL系统/FOLLOW THIS copy 2.md § WALK / STAND 每次开始前 / 换CAN / 装回后必做两件 A curriculum ramp keyed to the process step counter re-fires on every resume - and shipped policies never saw the penalty
curriculum-counter-lineage-stepsKey every curriculum/ramp schedule to lineage-cumulative progress, not per-process counters; and audit where your shipped checkpoints sit relative to every ramp - a penalty that no product ever experienced is not part of your training.
Symptom
vx+0.30 died at a fixed relative time in every resumed run: resume at 500 -> slide at 1100, zero at 1300; resume at 700 -> slide at 1300, zero at 1500 - absolute depths offset by exactly the resume offset, relative timetable identical.
Context
ramp_reward_weight (the saturation penalty ramp) read env.common_step_counter, which restarts at 0 for every run including --resume. So start_step=600 meant "600 iters after THIS resume", not "lineage iteration 600". The A/B arm pair was the clean proof: their env.yaml differed only in log_dir, only resume point distinguished them, and the omni CurriculumManager had exactly one active term - nothing else could produce that timetable. Second consequence: every shipped checkpoint (s1e-500 at +500, C2-700 at +200, A800 at +100) was selected before its run's +600, so the saturation penalty weight was 0.000 for every product ever shipped - explaining saturation 33% and raw |action| 1.9 against clip 1.0 (hip_roll in bang-bang), i.e. half the heat budget.
Change
Two independent recommendations recorded: (1) make the ramp count lineage steps (add the checkpoint's iteration offset on resume) or pin terminal weights in downstream rungs instead of ramping; (2) give the saturation penalty its own rung - never mixed into a skill-learning rung (that would be two variables again).
Outcome
Explained the recurring +600 death of the highest-amplitude command and the persistent actuator saturation of all shipped products with one root cause; honest caveat booked (at +800 the weight is only -0.086, small, but vx+0.30 is the command demanding the largest action amplitude, so it is squeezed first).
Mechanism
Resumable training splits "the lineage" from "the process"; any schedule keyed to process-local counters silently re-applies its transient to every descendant run, and any product-selection habit that picks checkpoints early systematically samples the pre-ramp regime - the curriculum exists in the config but never in any shipped policy.
Applies when
- resumed/forked training with any scheduled reward or DR ramp
- a metric dies at a fixed offset after each resume
- shipped policies show behavior a late-schedule penalty should prevent
“ramp_reward_weight 读的是 env.common_step_counter，它每个 run 从 0 开始，--resume 也不例外。… 原始 run / 臂B | 500 | 1100 = +600 | 1300 = +800；臂A | 700 | 1300 = +600 | 1500 = +800 … 所有出品其实从没见过饱和罚。… 这解释了 sat_max_pct 33%、raw |a| 最大 1.9（clip 是 1.0）—— hip_roll 一直在 bang-bang，而罚它的那一项权重恒 0。热账的一半在这里。”
train/C_LADDER_RUN.md § 3g. 系统性问题：saturation_ramp 每次 resume 归零 A torque-tail penalty was paid for by bracing the legs against each other - the second simulator's leg-contact count caught it, and the first explanation ("the trainer can't see self-collision") was retracted from the run's own config
torque-penalty-bought-by-leg-bracingWhen a penalty lowers a demand metric, look for what the policy traded to get there - keep self-contact frames and foot spacing as standing sim2sim readouts - and check any "the trainer cannot see X" explanation against the run's resolved config before it enters the record.
Symptom
After R3.1's torque_headroom term collapsed the demand tail, MuJoCo success fell 100 -> 98% and leg-leg contact frames at mu 1.0 rose 750 -> 2,190 (worst rollout 177 -> 450). The one failure (prone seed 2) had the legs crossed, one foot on the other leg, trapped at 0.067 m - visible on video.
Context
Across the ten prone seeds, foot spacing and leg-leg contact frames were monotonically anti-correlated, and the failure was the extreme of the series. Pulling the legs toward the midline shortens the hip_roll lever arm and lowers torque demand. At the time the spec explained it as Isaac training without self-collisions ("a free lunch in a simulator without self-collision").
Change
Leg-leg contact frames and foot spacing were tracked in every MuJoCo gate; R3.2's candidates were "train with self-collision on" or "a minimum leg spacing term" - not stacked.
Outcome
The next rung's joint-velocity penalty incidentally erased the dependency (2,190 -> 86 frames). On 08-10 the runs' logged env.yaml showed enabled_self_collisions true in both r3_1 and v2_2 (inherited from walk v10): the tangle was physically learned bracing, visible to both simulators, and the Isaac/MuJoCo contact-count gap was mesh and contact fidelity. The "self-collision debt" narrative was withdrawn for the whole line.
Mechanism
A penalty on demand rewards any configuration that lowers demand; legs pressed together act as a mutual support that fails when contact geometry shifts slightly.
Conflicts
§24 attributes the dependency to self-collisions being disabled in training; §36 retracts that from the runs' env.yaml ("§24's mechanism explanation was wrong") and keeps the older sections unedited as history.
Applies when
- a torque, impact or energy penalty improves its metric and cross-sim success drops
- legs or links approach each other after a regularization change
- an explanation relies on a simulator setting nobody checked in the run config
“prone 十个 seed 逐条看,脚距与腿-腿接触帧数单调反相关, 而唯一失败的那条正是最极端的一条 … 机制上说得通:把腿收到身体中线附近能缩短 `hip_roll` 力臂、降低力矩需求”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §24 代价:MuJoCo 成功率 100% → 98%,病因是两腿卡住 A 2-degree joint-zero calibration fix moved the whole runnable envelope - re-test old "cannot run" verdicts after recalibration
zero-offset-calibration-shifts-envelopeDate every hardware verdict with the calibration state; after any zero/mount recalibration, re-test previously condemned policy-power combinations and previously "unexplainable" posture offsets before attributing either to training or model.
Symptom
s1d was on record as "only runs at power 0.7" (kicked wildly at 0.8); after a calibration pass, the same policy ran 12 s at 0.8 with no kicking at all.
Context
The calibration had fixed a 2.08 deg zero offset on r_hip_roll - exactly the constant error source on the dominant joint of the kicking oscillation loop ("恰是乱踢振荡环主导关节的常值误差源"). The three-generation post-calibration hardware sweep also closed a second case: the robot's mysterious "backward lean" disappeared after calibration, and the sim-real posture difference collapsed from opposite-sign 5+ deg to same-sign ~2 deg ("后仰案实质了结") - the lean had been a sensing/zero artifact, not a mass-model error. Booked consequence: if the s1d recovery re-verifies, "真机可跑档整体 上移" - every policy's runnable power envelope shifts up, and downstream lineages' hardware expectations get revised.
Change
Joint-zero and mount calibration promoted from setup chore to a variable that dates hardware verdicts: verdicts about which power/scale levels a policy can run are conditioned on the calibration state they were measured under.
Outcome
One policy rehabilitated at a higher power level; one standing sim-real posture discrepancy closed without touching model or training; a pending re-verification booked rather than asserted.
Mechanism
A constant joint-zero error acts as a persistent disturbance injected at the feedback loop's most-loaded joint; near an oscillation threshold, removing a 2-degree bias is the difference between a stable and an unstable loop. Since the error is additive and machine-side, it shifts every policy's stability envelope simultaneously - which is why verdicts must carry their calibration date.
Conflicts
The s1d rehabilitation awaited one confirming re-run at the time of writing ("待复核一跑坐实") - the offset-as-cause reading is the head suspect, not a closed verdict.
Applies when
- a policy oscillates at a power level others tolerate
- sim and real disagree on a constant posture offset
- deciding whether to re-test old hardware verdicts after maintenance/calibration
“发现①:s1d@0.8 能跑了(旧账「只有 0.7 能跑」)——12s 无乱踢。头号嫌疑 = 标定修正:r_hip_roll offset 修 2.08°,恰是乱踢振荡环主导关节的常值误差源。… 发现②:「后仰」标定后消失 … sim-real 姿态差从反号 5°+ 收敛到同号 2°,后仰案实质了结。”
train/README.md § 真机 @0.8 三代横评(2026-08-07 标定后) Sort external training advice into adopt / already-have / modify / would-trap by recomputing it on your own config
external-advice-audit-against-own-arithmeticNever apply external tuning advice directly: recompute each claim on your own reward table and probe data, classify it adopt / have / modify / trap, and record why - and verify external citations actually exist.
Symptom
External AI/literature advice for the omni ladder arrived plausible-sounding but was written without knowledge of this robot's actual reward table, contract, and history; following it blindly would have broken single-variable discipline and, in one case, made sidewalk unlearnable.
Context
Before the C ladder, every external suggestion was audited: 3 adopted (ellipsoid command sampling; staged wz bands; command-switch acceptance), 3 already present (unified reward; frame history - the frozen 168-dim 5-frame window; per-100-iter acceptance), 2 modified (stand share kept at 20% to avoid a second variable; back share NOT raised because the probe showed backward works untrained 20/20@67%, so oversampling would only crowd out forward), and 1 flagged as a trap: "start vy very small (0.06-0.15)" - on THIS reward table vy was only an L2 tax, so ignoring a vy=0.06 command costs 0.4% of the vx tracking scale, 28-180x cheaper than ignoring forward, with quadratic shrinkage making small commands weaker still. A separate retrieval-reliability note: two search agents returned fabricated verbatim quotes from arXiv PDFs (2 papers, verified fake and discarded); only HTML/abstract/source-verifiable material was used.
Change
Advice classified only after recomputing each claim with local numbers; the "start small" trap was replaced by adding a gated lateral tracking term (the ladder's only true reward surgery) instead of shrinking the command.
Outcome
The adopted items (ellipsoid modes, staged wz, transition acceptance) entered the ladder; the trap was avoided; one external factual error (calling s1g the mainline start - it was falsified 0/20) was caught. Later, one initially-dismissed item (sigma=0.15 too narrow) turned out right for a different reason than claimed - see cycle-average-tracking-for-gait-quantities.
Mechanism
External advice encodes the advisor's reward table and robot, not yours; the transfer-validity test is whether the claim survives recomputation under your own arithmetic (reward margins, probe baselines, contract freeze). Items that survive become experiments; items that don't become documented traps.
Applies when
- incorporating LLM or literature advice into a training plan
- advice conflicts with locally measured baselines
- an external claim depends on reward-table details the advisor cannot know
“其建议 C4「先很小，vy = ±0.06~0.15」—— 在我们这张奖励表下会让侧走学不起来 … 忽略侧走比忽略前进便宜 28~180 倍，且指令越小激励越弱（平方缩放）—— "先很小"在稳定性上对、在梯度上正好把信号缩没了。”
train/C_LADDER_RUN.md § 1. 外部 AI 训练建议的评估（采纳 / 已有 / 要改 / 会踩坑） Teleop fed the sidewalk axis a command beyond its training band - feet clipped; give each axis its own speed setting
teleop-command-band-per-axisGive every command axis its own teleop scale, clamped to that axis's training band, and reproduce any hardware incident in sim with the exact deployed command values before touching training.
Symptom
Robot stepped on its own foot when sidewalking left under teleop - and only when going left.
Context
The teleop tool used one speed setting for all axes: --teleop-speed 0.20 applied to A/D sent cmd_vy = 0.20, above the training band's top (0.08-0.18) where foot-spacing margin is thinnest. Sim reproduction of the incident (product policy, pw0.8, 5 seeds x 20 s, true collision threshold = single foot width 104 mm): at vy 0.20 the minimum foot distance was 111-115 mm - 7-11 mm from self-collision - vs 147 mm at vy 0.10. Left was 4x more dangerous than right (25% vs 6% of time inside the 160 mm soft wall at vy 0.10), matching the left-only symptom; the margin did not degrade over time (pressing more just lengthened exposure).
Change
deploy_policy gained --teleop-side (default 0.10), separating the lateral speed from the forward speed so each axis's teleop command sits inside its own trained band.
Outcome
Command now inside the band with 43 mm margin at default; the incident became a quantified, reproduced, closed account rather than a mystery.
Mechanism
The policy's competence envelope is the training command distribution per axis; teleop mappings that share one scalar across axes silently command out-of-band inputs on the weakest axis. Asymmetric risk (left vs right) came from the policy's own chirality bias, so a symmetric command produced an asymmetric hazard.
Applies when
- wiring a joystick/teleop layer over a learned policy
- a hardware incident occurs on one command direction only
- training bands differ across command axes
“A/D 一直与 W/S 共用速度档，所以按 A 下发的是 vy = 0.20 —— 既超训练带（0.08~0.18）上沿 … 0.20（遥控实际值）| 111~115 mm | 7~11 mm … 且左比右危险 4 倍 … 处置：deploy_policy 新增 --teleop-side（默认 0.10），侧移与前进档分开。”
train/C_LADDER_RUN.md § 3p. 一 向左走踩到自己 → --teleop-speed 0.20 同时喂给了 vy A pull-assist curriculum keyed to a global success share was satisfied by the categories that already worked and withdrew before prone learned anything - conditioning the criterion on prone took it from 2.5% to 98.7%
curriculum-criterion-conditioned-on-lagging-categoryMeasure a curriculum's advancement criterion on the population the scaffold is meant to help; a global success share is met by whatever already works, and the help is withdrawn before the lagging case learns.
Symptom
Under the beta-anchored action, supine and side stood reliably while prone still sat (1.3%). A pull-assist curriculum added to help it was withdrawn completely within ~790 iterations and prone moved only to 2.5% (noise).
Context
The pull assist follows HoST: an upward force on the base, active only when the torso is within 30 deg of vertical, scaled by body weight (HoST's 200 N on G1 = 0.583 BW -> 56 N here, steps of 5.6 N, ten levels to zero); the product must pass with no assist. It had already taught sit-to-stand in V1. In V2.1 its advancement criterion was the standing-time share over all envs (threshold raised to 0.55 because the share was already ~0.53).
Change
V2.2: PullAssistForce with gate_category = "prone" - only envs whose first step classifies them as prone count toward the criterion - and the threshold back at 0.35. A feasibility signal was pre-registered: if prone's share stayed near zero under the full 56 N, return to the roll-over path instead of adding force.
Outcome
The prone-conditioned curriculum withdrew level by level only as prone itself passed: prone 98.7%, and the four-category gate passed for the first time on the line (98.6% overall, re-falls 0%, torque gate PASS).
Mechanism
A pooled success share is filled by the categories that already succeed (supine/side ~53%), so the scaffold is removed on their account before the lagging category has used it.
Applies when
- an assist, guide force or easier setting is withdrawn by a success threshold
- one task category lags while the pooled metric looks healthy
- a curriculum ran to completion without changing the lagging category
“**教训:全局站立占比阈会被存量类别(supine/side ~53%)凑够,拉力在 prone 学会前就撤光了 —— metric 设计失误,不是拉力机制失效**(它在 V1 教会过 坐→站)。 … **V2.2(已启动)**:`PullAssistForce` 加 `gate_category="prone"` —— 达标判据 只统计 prone 类 env”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §34 V2.1 判决(2026-08-10) A 10 s acceptance episode left 6-7 s of standing to observe - a narrow stance held for that window and split on hardware; a gate cannot see instability slower than its own horizon
episode-length-bounds-what-a-gate-seesSize the standing phase of an acceptance episode, and its disturbances and floor friction, to what deployment will impose; a pass on a short static window certifies only that window.
Symptom
v2_6 passed every simulation gate (success 99.6%, re-falls 0-1%) and then, on the real robot, stood up and slid into the splits several times; prone starts stood and then fell backwards.
Context
Acceptance ran 10 s episodes; a ~1-2 s get-up left roughly 6-7 s of static standing on a nominal floor with no disturbance. The narrow stance's lateral margin and the straight-knee stance's lack of any flex buffer are both failure modes that need time, disturbance or lower friction to show.
Change
The gap was booked as a known blind spot of the gate ("long-duration standing stability") alongside the task-space stance criterion; later rungs added MuJoCo friction sweeps at mu 0.4 to every checkpoint scan.
Outcome
The spec through §50 records the blind spot but no longer standing window or disturbance row in the recovery acceptance itself.
Mechanism
An acceptance episode observes only the dynamics that unfold within its horizon under its conditions; slow drifts and disturbance-triggered failures are outside it by construction.
Applies when
- a policy passes sim gates and fails on hardware after a delay
- acceptance episodes are short relative to deployment use
- stability is judged without pushes or friction variation
“**sim 门为什么没逮住**:10 s episode 起身后只站 ~6-7 s,静态窗口内窄站距 撑得住;真机站立时长/扰动谱在门口径之外 —— 长时站立稳定性记为口径缺口。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §43 判读:sim 门为什么没逮住 A proposal in the runbook - torque and action limits as versioned safety tiers (classroom / research / expert) written to motor RAM and read back, separate from the reward's effort penalty - recorded as a proposal, its implementation unrecorded
safety-limits-are-a-layer-not-a-rewardKeep hardware limits as an explicit, versioned safety layer (tiers written and read back at start, the persisted default the safest one) and the effort penalty as a behaviour layer; when a skill needs more torque, change tier deliberately rather than trading one layer against the other.
Symptom
Running and jumping need more torque than the deployed limits allow, and the temptation is to trade the training-side effort penalty against the hardware limit, or to hand a new user a robot "tuned however the last person left it".
Context
A message pasted into the operator runbook (undated, citing Berkeley's practice of storing the full motor configuration as JSON with write and read-back scripts) proposes: configuration is a versioned artifact, not a verbal agreement; three safety tiers in robot.yaml beside the gain and policy profiles - classroom (RS06 limited to 10 N*m, lateral joints clamped: "however bad the policy, it only moves awkwardly"), research (14 N*m, clamps at twice the measured need, the default) and expert (the 36 N*m rating, joint limits only, requiring an explicit flag); deploy writes the tier to motor RAM at start and reads it back, while the stored copy stays classroom so a power cut returns to the safest state. It frames limits as the safety layer and the effort penalty as the behaviour layer - more torque for running means switching tier, not weakening the penalty.
Change
None recorded: the message ends by asking which to do first, a rollback or the tiers.
Outcome
The sources do not record the tiers being implemented; the deployed limits stayed at 12/17/11 N*m through the recovery and one-leg lines (the one-leg spec treats raising the RS06 limit as a separate, unapproved hardware decision). Related and recorded elsewhere: torque limits were written to RAM only in a scripted, self-reversing field experiment.
Mechanism
Hardware limits bound the damage any policy can do; reward terms shape what a policy prefers. Mixing them either weakens safety to buy behaviour or distorts behaviour to buy safety.
Applies when
- a new skill needs more torque than the deployed limits
- robots are handed to students or new users
- motor configuration lives in people's heads or in the firmware only
“配置是版本化的产物,不是口头约定。 … deploy_policy 启动时按档写进电机 RAM 并读回校验(落盘的那份永远保持 classroom,断电自动回到最安全状态)。 … 限幅是安全层,dof_torques_l2 是行为塑造层,它们在不同的层,不冲突。跑步要更大力矩就换档,而不是去动训练里的省力惩罚。”
RL系统/FOLLOW THIS copy 2.md § 面向 developer / 教育机构该怎么做 (pasted proposal, undated) A constant-value plant rung passed every binary gate with record scores - and shipped 60% thinner posture margins that hardware exposed
constant-value-dr-overfits-marginRandomize deployment-critical axes over a narrow band spanning the measured real support - never a single value, never a fictitious tail - and report graded margin quantities (tilt margin) next to binary gates, because saturated gates rank thin-margin and thick-margin policies identically.
Symptom
s2_lag1 (trained at constant 1-frame latency) posted the strongest sim gate sheet in history (20/20 everywhere) yet was unstable on hardware, while s1e (trained across the full 0-3 frame band) was the every-run-stable SOTA at the same power.
Context
The sim autopsy (new --delay-jitter harness modeling the BusWorker's time-varying phase drift): 18 runs across constant and time-varying delays ALL survived - time variation alone does not kill - but the tilt-margin ordering reproduced hardware exactly: s1e 7.7-9.1 deg (thickest) < s2_lag1 10.7-15.0 < s1c 16.2-18.2. Attribution: constant-value training permits precise specialization to that one value; s1e's band diversity forced cross-value robustness - "恒定 1 帧训练 vs s1e 的 0~3 帧全带——分布多样性逼出跨值鲁棒,恒定值允许精确 特化" - so the constant-rung policy's margins were ~60% thinner, fine in sim's clean world, pushed over the line by real-world disturbances. Tool lesson booked: "存活门二值饱和后掩盖裕度差" - binary survival gates saturate and hide margin differences; graded margin columns (tilt-max) belong in the report. The synthesis with the opposite failure (wide tails cause drag-glide): the proposed resolution was a NARROW uniform band (0.02, 0.04) covering exactly the real 1-2 ticks - diversity inside the measured support, no tail, no single point. s1e's root selection later leaned on the same property: its full-band latency training "预装" the delay rungs and delivered "全工况稳定裕度" that survived power derating.
Change
DR-on-an-axis design refined to a three-way distinction: no wide fictitious tails (drag), no single constant values (thin margins), but a narrow band spanning the measured real support; acceptance reports gained graded margin columns alongside binary gates.
Outcome
The tilt-margin column entered the standard report; the s1e root (band-trained) carried the C ladder while the constant-value branch was archived with its three contributions credited.
Mechanism
Robustness margins are shaped by the diversity of the training distribution, not just its support: a point-mass distribution lets the optimizer trade margin for on-point performance, while a band forces solutions that keep margin across the band - and binary survival metrics cannot see the difference until the margin is spent on hardware.
Conflicts
The narrow-band (0.02,0.04) resolution was a pending recommendation ("裁决建议(待用户)") at the time of writing; the lineage instead moved root to s1e whose full-band training predated the staged ladder - the deterministic-staging card and this card record the two failure modes the final design must avoid simultaneously.
Applies when
- a rung trained at a fixed plant value aces sim but wobbles on hardware
- binary acceptance gates are all saturated across candidates
- choosing between constant, banded, and wide DR on one axis
“18 跑全活,时变性单独不足以击杀;但 tilt_max 裕度排序完整复现真机:s1e 7.7~9.1°(最厚)< s2_lag1 10.7~15.0 … 恒定 1 帧训练 vs s1e 的 0~3 帧全带——分布多样性逼出跨值鲁棒,恒定值允许精确特化 … 存活门二值饱和后掩盖裕度差(s2_lag1 sim 门 20/20 史上最强却真机不稳)”
train/README.md § s2_lag1 真机不稳 × s1e 稳的 sim 对拍(2026-08-07,时变延迟实验) Continuing a converged policy on a change that carried no new gradient drifted its transfer from 100/98% to 80/28% over 3,000 iterations while every Isaac gate stayed perfect - scan every checkpoint on the second simulator's friction axis
converged-continuation-is-poisonBefore continuing a converged policy, check that the change creates a live gradient; if it does not, cap the budget at a few hundred iterations, and in every continuation scan each checkpoint on the second simulator's transfer axis (for example low friction) - trainer-side gates can stay perfect while transfer decays.
Symptom
V2.7-A (swap the flat_feet term for a compensated version, continue from v2_6c) finished with the line's best Isaac score (100%) and a MuJoCo transfer collapse: mu 1.0 98 -> 80%, mu 0.4 98 -> 28%; the stance it was meant to widen had not moved.
Context
The new term's calibration run showed a near-zero tax from the start: the policy already satisfied it, so the reward landscape offered nothing new. A checkpoint scan on MuJoCo mu {1.0, 0.4} located the damage: +100 iterations 100/98% (better than the baseline), then 86/54, 60/38, 80/28 - monotonic decay with training length, while entropy and action noise rose (7.77 -> 8.18, 0.588 -> 0.612): drift, not sharpening.
Change
Rule written in: with no new gradient, a continuation budget is short (at most a few hundred iterations) and the MuJoCo transfer axis enters every checkpoint scan. The next rung (V2.7b, a live stance-width gradient) was budgeted at 1,000 iterations with mu {1.0, 0.4} scans every 100 and a stop-on-signal rule.
Outcome
V2.7b kept transfer at the same depth (mu 1.0 98% / mu 0.4 92% at +1,000, where A had already rotted to 86/54) and at +3,000 (100/96%): a live gradient preserved transfer. V2.8 then broke that pattern (mu 0.4 2%): the gradient must also be compatible with the policy's existing form.
Mechanism
On a converged reward landscape PPO keeps updating without a signal to follow, and the random walk is pulled toward whatever the training plant rewards idiosyncratically - invisible in the trainer's own gates.
Conflicts
The drift mechanism is the spec's reading of one decay series plus one contrasting run; V2.8 is recorded as an exception to "live gradient keeps transfer".
Applies when
- fine-tuning a converged policy with a small reward change
- a continuation run's trainer-side metrics improve while real or cross-sim results worsen
- choosing which checkpoint of a continuation to ship
“**checkpoint 扫定死因**(μ1.0/μ0.4):**29500(+100 iter)= 100/98%** (优于基线!)→ 30400 = 86/54 → 31400 = 60/38 → 32398 = 80/28 —— **迁移随续训长度单调衰减**。 … **教训入库:收敛均衡上的长续训是毒药 —— 无新梯度时 续训预算须短(≲数百 iter),且 MuJoCo 迁移轴必须进 checkpoint 扫描。**”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §43 结果:V2.7-A 判 FAIL —— 换刀本身无罪,毒在续训预算 Never referee a suspect metric with another metric from the same code - they can share the disease
independent-referee-for-metric-disputesTo adjudicate a disputed measurement, compute the quantity by an independent method from raw state; never accept a sibling column from the same pipeline as the tiebreaker.
Symptom
A triple reversal on one question: sidewalk sign diagnosis (correct) was retracted using a second metric from the same script, then the retraction itself had to be retracted when that second metric turned out to be the buggy one - two opposite-direction errors on the same problem in one day, both written into the execution sheet.
Context
The probe's net-displacement metric suggested the sidewalk reference sign was inverted. Worried about yaw-drift pollution of net displacement, the author checked the same table's body-frame vy_mean column (~0.003 everywhere, 20-50x smaller) and retracted the sign diagnosis. But vy_mean came from mj_objectVelocity, which was silently reporting vertical velocity due to a frame bug - the "referee" was the diseased measurement. Re-measured with a truly independent computation (xmat.T @ qvel, world trajectory), the original diagnosis was confirmed: saw -0.5 gave vy +0.058/-0.130 (76%/106%), consistent with the net-displacement values all along (yaw pollution was real but only 10-21 deg, nowhere near reversal-sized).
Change
Lesson written twice, verbatim, as a hard rule: when questioning a measurement, the referee must be an independent algorithm (different code path, different physical derivation), e.g. rotate qvel by the body matrix directly, or inspect the raw world trajectory.
Outcome
With the independent referee in place the frame bug was confirmed, fixed, and the whole C4 line re-scored - revealing sidewalk had been working (see body-frame-velocity-api-audit).
Mechanism
Metrics sharing a code path (or an upstream API) share failure modes; agreement between them is evidence about the code, not the world. Only a measurement with an independent derivation can break the tie, because its errors are uncorrelated with the suspect's.
Applies when
- two metrics of the same quantity disagree
- about to retract a conclusion based on a second readout
- auditing evaluation code after a surprising result
“我用一个坏指标去质疑一个好指标，并把撤回写进了执行单。教训（写死）：质疑一个测量时，不能用同一份代码里的另一个测量当裁判 —— 它们可能同源同病。裁判必须是独立算法（这次的裁判应该一开始就是 xmat.T · qvel[:3]，或直接看世界轨迹）。”
train/C_LADDER_RUN.md § 3m. 二 我今天犯了两个方向相反的错 / 3n. 五 元教训 No parameter tuning on the floor - a failing config retries once, then it is out; anomalies go back to sim
no-field-tuning-protocolHardware time is for executing and measuring the pre-registered matrix, never for tuning: failing configs get one retry then elimination, anomalies get recorded and reproduced in sim, and contract-check bypass flags stay unused.
Symptom
Hardware sessions create pressure to fix problems live - nudge a gain, tweak a scale - which destroys attribution and risks the robot.
Context
The anomaly-handling section of the acceptance sheet is three fixed plays: (1) falls at start -> retry once at the same settings; falls again -> that configuration is eliminated, "不现场调参" (no on-site parameter tuning); (2) limit cycle or motor screech -> stop immediately, record the gain level and the joint, reproduce in sim before any discussion; (3) systematic disagreement with sim -> record it as a finding (hardware outranks sim) rather than adjusting anything to force agreement. Related guardrails elsewhere in the sheet: never pass --allow-unstamped / --allow-plant-drift to bypass manifest checks - if it errors, something real is wrong, stop and look.
Change
Field sessions restricted to executing the pre-written matrix; every fix path routed through sim reproduction and the normal config/rung process.
Outcome
Sessions stayed interpretable (each run matched a documented config) and safety overrides never became habit; anomalies arrived back in sim as reproducible cases instead of half-remembered floor stories.
Mechanism
Field-tuned values are measured under adrenaline on one floor with no logging or baselines - they contaminate the config lineage and are unattributable afterwards; and every bypass flag that skips a contract check converts a designed safety property into an operator promise.
Applies when
- a config fails or oscillates during a hardware session
- someone reaches for a live gain tweak or a bypass flag
- writing the anomaly-handling section of a deployment runbook
“起步即摔 → 换档重试一次, 仍摔则该档出局, 不现场调参。出现极限环/啸叫 → 立刻停, 记录档位与关节, 回 sim 复现再议。… 不要给 --allow-unstamped / --allow-plant-drift —— 三枚 ONNX 都已盖章 … 真要报错说明有别的问题, 停下来看。”
train/REAL_RUN_S2.md § 4. 异常处置 Late training leaned on sampling noise as a stability crutch - deterministic play collapsed while training metrics stayed green
noise-crutch-deterministic-collapseEvaluate the deterministic policy in an external harness on a fixed cadence during training (not just at the end), select checkpoints on that curve, and treat a collapsing noise_std with rising training reward as a warning that noise is load-bearing.
Symptom
omni_s1's final checkpoint (model_5999) fell at 4 s even in Isaac's OWN deterministic play, while checkpoints from iter 1700-4000 were fine - and no training metric flagged anything. Policy noise_std had collapsed to 0.045 by iter ~990 (final 0.033).
Context
Diagnosis: the policy had learned to use its exploration noise as a dither/stabilizer - "策略把采样噪声当稳定拐杆,训练指标看不见" (the training metrics cannot see it, because training always runs with noise on). Countermeasures: entropy_coef 0.005 -> 0.01 to slow the std collapse, and - the structural fix - an in-training smoke loop (watch_ckpt.py): every 500 iters, export ONNX directly, run 3-seed MuJoCo evaluation, log CSV/TensorBoard curves plus three-view videos. The doctrine line was written in bold: "训练指标全绿不再是发育健康的 证据,冒烟曲线才是" - green training metrics are no longer evidence of healthy development; the smoke curve is. The follow-up run s1b showed the drift metric follow a U-shape (73 -> 8.6 at iter 3500 -> 76), making checkpoint selection BY the smoke curve (early stop at 3500) the shipping mechanism, with terminal re-degradation booked as known and unresolved.
Change
entropy floor raised; watch_ckpt smoke loop instituted as standing infrastructure; checkpoint selection moved from "last iteration" to "best point on the deterministic smoke curve".
Outcome
s1b shipped from iter 3500 (the U-bottom) instead of a degraded terminus; every later lineage (s1c/s1e, the C ladder's --every 100 loops) inherited the watcher as the standard guardrail.
Mechanism
PPO evaluates and improves the stochastic policy; if noise itself stabilizes the gait (dither smoothing a marginal limit cycle), the deterministic mean policy is a different, worse controller that training never measures. External deterministic evaluation on an independent simulator is the only readout of what will actually be deployed.
Applies when
- final checkpoints underperform mid-training ones
- noise_std collapses early while training reward climbs
- deciding which checkpoint to export and ship
“训练后期确定性脆化——noise_std iter~990 收到 0.045(终 0.033),model_5999 连 Isaac 确定性 play 都 4 s 摔(1700~4000 正常):策略把采样噪声当稳定拐杖,训练指标看不见。对策:entropy_coef 0.005→0.01 + train/watch_ckpt.py 训练中冒烟曲线 … 训练指标全绿不再是发育健康的证据,冒烟曲线才是。”
train/OMNI_V0_SPEC.md § 3. S1.1 修订记录 ② Write each config's expected hardware signature before the session - and if reality disagrees, change the books, not the conclusion
preregistered-real-expectationsBefore hardware runs, write per-config expected signatures and the disagreement rule (hardware outranks sim; discrepancies get recorded, not reconciled); validate the harness by checking it reproduces at least one known real behavior.
Symptom
Hardware impressions are easily narrated after the fact; without written expectations, any real-robot outcome can be made to "match" the sim story.
Context
The S2 acceptance sheet carried a section titled "sim 侧预注册预期 (事后核对, 不许事后改)" - per-configuration behavioral signatures written before the session: s1e@0.8 the disturbance king (push 159/160, zero chirality, all-mu 20/20) at the cost of speed gates 0/20 and zero-command wander ~0.98 m with -29.5 deg/20 s rotation; fric-3000 "walks accurately but is easier to push over"; fric-2400 neither. Credibility check included: the sim harness had reproduced the already-recorded real behavior (pace in place + right drift + net rotation -30 deg/20 s), which "提高本单全部预期的可信度". The anomaly clause fixed the epistemics in advance: if results systematically disagree with sim, "不改结论改账" - don't massage the conclusion, write the discrepancy into the books, and per the earlier zero-warning lesson, hardware wins.
Change
Every hardware session ships with a pre-registered expectation table (signature per config), a baseline-match credibility check, and a written precedence rule for disagreement.
Outcome
The A/B session became falsifiable: agreement confirms the proxy, disagreement is booked as a proxy-bias finding rather than argued away.
Mechanism
Pre-registration converts qualitative hardware sessions into tests of the sim-to-real mapping itself; a reproduced known behavior calibrates trust in the remaining predictions; and fixing "who wins on disagreement" beforehand prevents authority from drifting to whichever source flatters the plan.
Applies when
- planning any hardware acceptance or A/B session
- the sim harness's credibility in this regime is unestablished
- post-session write-ups tempt narrative fitting
“⚠️ sim 复现了真机已记录的「原地踏步 + 右漂 + 净旋 −30°/20s」—— harness 与真机行为对得上, 提高本单全部预期的可信度。… 结果与 sim 系统性不符 → 不改结论改账: 写进 README 该节, 按 「Isaac 指标三次零预警」的教训, 以真机为准。”
train/REAL_RUN_S2.md § 2. sim 侧预注册预期 (事后核对, 不许事后改) / 4. 异常处置 Push DR helped one lineage and hurt another at the same dose - robustness budget is conserved and gets borrowed, not created
push-dr-conditional-budget-conservationBefore opening a disturbance-DR rung, measure whether the untrained policy already meets the spec; if training it anyway, expect the benefit to be conditional on the lineage's existing DR load, grade the intensity, and audit retained margins - budget spent elsewhere will be borrowed back.
Symptom
The push rung's outcome flipped with the lineage: direct +/-0.6 m/s push failed outright on first attempt (base walking collapsed - kd1.2 scan 0/3 from iter 3300, sim2sim self-falls with pushes OFF - no PASS point existed); staged +/-0.3 then gave the narrow-kd single-working-point lineage real gains (push survival 1/5 -> 4/5) while the SAME dose made the dual-working-point balanced-band lineage WORSE (20-seed survival 18 -> 12/20 plus across-the-board push regression).
Context
The four-ladder verdict ("四梯定案", s2e/s2f at both intensities) named the pattern: "push DR 收益条件性" - the benefit is conditional on how much robustness budget the lineage has already spent. The law candidate: "DR 总预算守恒, 平衡带鲁棒性从抗扰余量借" - total DR budget is conserved; a lineage already covering a wide plant band pays for push tolerance out of its disturbance margin. Both S2 ladders therefore closed at the friction rung, with the decisive numerator: untrained push tolerance already met the 4-6 N*s requirement, so the rung was not needed at all ("⑥ push 不训(收益条件性,免训 ±0.6 已达 标)"). The same accounting later justified the C-before-S2 ordering ("push/μ 两轮已实证 DR 预算有限且会被重分配") and trimmed the second S2 pass to three rungs.
Change
Push removed from the standing ladder; graded intensity retained as the method IF a lineage ever needs push training; "does the untrained policy already meet the disturbance spec" instituted as the first check before opening any disturbance rung.
Outcome
Two rungs (push, ground mu) deleted from the second S2 pass on measured grounds; the ladder's real yield was re-stated honestly as precision, not robustness (speed gate 0 -> 20/20, zero-command drift 0.98 -> 0.06 m, but push 159 -> 125/160).
Mechanism
A fixed-capacity policy allocates representation and margin across the training distribution; adding a disturbance axis to a lineage that already spans a wide plant family forces reallocation - the new tolerance is bought with existing margins. Lineages with narrow plant coverage have free budget, so the identical DR dose lands as gain. Benefit is a property of (dose x lineage state), never of the dose alone.
Applies when
- proposing push/perturbation training on a hardened lineage
- the same DR rung helped one lineage and hurt another
- accounting where a ladder's robustness gains actually came from
“push DR 收益条件性 —— s2e⑥a (单工作点血统 kd 窄带) ±0.3 得抗推 1/5→4/5; s2f⑥ (双工作点平衡带血统) 同档反而 20-seed 存活 18→12/20 且抗推全面倒退。规律候选: DR 总预算守恒, 平衡带鲁棒性从抗扰余量借。两阶梯均以 ⑤ 摩擦级收官 … 抗推 4~6 N·s 免训已达标。”
train/OMNI_V0_SPEC.md § 4. ⑥ push 四梯定案 (2026-08-07) The best checkpoint to SHIP is not the best checkpoint to CONTINUE FROM - maturity is capital against adaptation shock
root-maturity-vs-product-qualityDecide shipping points and fork roots separately: gates rank products, but a root candidate must prove itself by surviving a continuation under the next rung's shift (dual-arm if in doubt) - and prefer the more-trained point as root when product metrics conflict with maturity.
Symptom
A band re-audit found s1e-300 beat the incumbent root s1e-500 on nearly every quality gate (stepping 19/20 vs 13/20 with historically-best 26.9 mm swing, speed gate 14/20 vs 2/20, heading 26 vs 54 deg/20 s) - suggesting the root had been mis-picked and the younger point should take over.
Context
The dual-arm control settled it the other way: continuing the S2 PD rung from s1e-500 adapted smoothly (3/3 smoke throughout), while the b300 control arm (same config, from s1e-300) fell into a survival valley under the PD shock (+100 iters: 1/3 -> 0/3), never climbed out within budget, and its 800-iter product scored 13/20 survival - eliminated. Verdict: "幼年点自身指标再好也扛不住新 DR 适应冲击, 成熟度是本钱,s1e-500 根被数据背书" - a young point's own metrics, however good, do not survive new-DR adaptation shock; maturity is capital. The audit still yielded value: the band scan (200-1000, per-100) mapped the lineage's arc (200 dragging -> 300 peak -> 400+ decay -> 900+ drift blowout), and 300 remains the better PRODUCT answer for shipping-as-is questions.
Change
Selection doctrine split into two questions with different answers: best-product point (quality gates at the point itself) vs best-root point (survives adaptation shocks; more training age = more capital), each decided by its own evidence - and root claims settled by a dual-arm continuation test, not by point metrics.
Outcome
s1e-500 kept the root role with data behind it; the S2e ladder built on it passed rung after rung, while the b300 line was closed at the cost of one control arm.
Mechanism
Early checkpoints sit near sharp optima with less accumulated robustness structure; their headline metrics reflect the narrow training distribution, not resilience to distribution shifts. A continuation rung is itself a distribution shift, so the root property being selected for is shock tolerance - observable only by actually continuing, never by static gates.
Applies when
- a younger checkpoint outscores the current root on quality gates
- choosing the base for a robustification or command ladder
- a continuation run stalls in an early survival valley
“b300 对照臂 … PD 冲击下存活谷(+100 起 1/3→0/3),预算尽未爬出,800 档 20-seed 存活 13/20 出局——幼年点自身指标再好也扛不住新 DR 适应冲击,成熟度是本钱,s1e-500 根被数据背书”
train/README.md § omni_s2e_pd (b300 对照臂) / s1e 选点重审 Under continuous 3-axis uniform sampling, pure straight-line walking is a zero-measure event the policy never trained
zero-measure-commands-need-mode-samplingEnumerate the exact command points users will actually issue (straight, stop, in-place turn) and give each explicit probability mass via mode sampling with off-axes pinned to zero - never assume a continuous sampler covers its measure-zero subsets.
Symptom
"The robot drifts even in sim when told to walk straight" persisted across reward tunings - because with commands drawn as vx in [0.15,0.5] x vy ~ U(+/-0.2) x wz ~ U(+/-0.6), the event vy=0 AND wz=0 has probability zero: pure straight-line walking was never sampled even once.
Context
Restart evidence item #3: "纯直行是零测度点 … 'sim 里直行就漂'是分布的 必然,不是 reward 没调好" - the drift metric was legitimately drowned by commanded turning (v11's own comment self-documented this). The structural fix is discrete mode sampling: a custom ModeVelocityCommand that first draws a mode by share (stand/forward/back/turn/side/mixed), then draws values only on that mode's axes with all others pinned to exact zero - which is also what preserves single-variable discipline in the C ladder (native 3-axis uniform "采不出'离散模式桶' … 把 C1~C4 的单变量纪律直接毁掉"). The mixed mode later got an ellipsoid constraint rather than a cube for the same reason in reverse - corner combinations of a cube are unrepresentative extremes.
Change
Command generation moved from independent per-axis uniforms to mode-bucket sampling with pinned-zero off-axes (plus 20% rel_standing); acceptance likewise evaluates per mode.
Outcome
Straight-line behavior became a trained, testable mode instead of a measure-zero hope; the C ladder could add one mode per rung with provable isolation.
Mechanism
A policy optimizes expected reward under the command distribution; events of probability zero contribute nothing to the objective, so exact-zero-command behaviors (straight walk, stand, in-place turn) are only learned if the sampler gives them mass. Product-of-uniforms distributions concentrate mass on mixtures and give none to the pure behaviors users actually command.
Applies when
- a "simple" command (straight, stop) underperforms mixtures in sim
- designing command distributions for velocity-tracking tasks
- a ladder needs per-mode isolation for attribution
“纯直行是零测度点:最终 command 为 vx∈[0.15,0.5] × vy∈U(±0.2) × wz∈U(±0.6) 连续均匀,vy=0∧wz=0 从未被专门采样 —— "sim 里直行就漂"是分布的必然,不是 reward 没调好 … Isaac 原生 UniformVelocityCommand 是三轴各自 uniform,采不出"离散模式桶"”
train/OMNI_V0_SPEC.md § 0. 为什么从零 (3) / 三件前置 (1) Three hardware accounts locked the run design point - and the knee's real speed ceiling is tau_limit/kd, not the firmware limit
feasibility-accounts-lock-design-pointBefore opening a dynamic-gait training line, compute the full account set - tau_limit/kd effective speed ceilings, joint ROM under the intended reference geometry, and thermal RMS at the duty cycle - and let the accounts lock the design point; move only to pre-registered in-table alternates, re-running the accounts first.
Symptom
The run line was believed to require a firmware raise of the RS06 speed limit (10 rad/s) as a hard precondition, and the feasibility script's motor-envelope scan had marked 80/100 mm foot-lift cells "physically feasible".
Context
Three added accounts re-decided everything. (1) Damping tax: in MIT mode tau = kp*(q_des-q) - kd*qd, so sustained rotation is capped at tau_limit/kd = 12/1.5 = 8 rad/s - below the firmware's 10; at peak speeds 6.7-7.9 rad/s the damping term alone eats 10.1-11.9 N*m (84-99% of the torque limit). "提固件 limit_spd 越不过这道税 —— 它是 kd 与限扭的比,不是固件旋钮." (2) Joint ROM: the feasibility script had checked motor envelopes but NOT joint range - the ankle-pitch ROM caps 1:2:1 leg-shortening lift at 62 mm (soft) / 77 mm (hard), so the 80/100 mm "feasible" cells were voided; also firmware-independent. (3) Ankle thermal: duty 0.40 puts ankle RMS at 87% of continuous rating (0.35 -> 93%); long-period big-stride cells hit both ankle torque peak and heat. Verdict: firmware raise DEQUEUED (50 mm design point needs knee 6.7-7.3 < the 8 rad/s effective ceiling < firmware 10); vel_limit stays 10 so sim == robot. The three accounts uniquely lock the design point - 50 mm lift / T 0.60 s / duty 0.40 - "三笔账 唯一锁定,不是调参空间", with pre-registered alternates allowed only inside the table and only after re-running the accounts.
Change
Design point frozen from accounts; hardware precondition reversed by arithmetic rather than by test; reference amplitude (0.84 rad = FK inverse of 50 mm) derived, per-joint action scales sized to the required travel (knee 0.9, hip_pitch 0.6, ankle deliberately NOT amplified - hard limit is adjacent).
Outcome
A firmware work item left the critical path; an infeasible region of the design space was closed before any training; the remaining risk (knee tracking lag from the damping tax) was pre-registered with its own criterion and in-table fallback (duty 0.35) - "这不是'奖励没调好', 是 plant 账".
Mechanism
PD actuators in MIT mode pay kd*velocity out of the same torque budget that tracks position, so the effective speed ceiling is a ratio of configuration constants, invisible to firmware settings; and feasibility is the intersection of ALL constraint families (torque envelope, joint ROM, thermal RMS) - a scan that omits one family certifies impossible cells.
Applies when
- planning running/jumping or any high-rate gait on PD actuators
- a firmware or hardware upgrade is assumed as a training precondition
- a feasibility scan covers motor limits but not ROM or heat
“膝的有效速度顶 = τ_limit/kd = 12/1.5 = 8 rad/s,不是固件的 10。… 提固件 limit_spd 越不过这道税 —— 它是 kd 与限扭的比,不是固件旋钮。… 可行性脚本只查了电机包络没查关节 ROM —— 其 80/100mm 的"物理可行"格作废。… 判决:RS06 提固件对 run v0 不是前置,出队”
train/RUN_V0_SPEC.md § 1. 硬件账判决 / 2. 步态设计点