Training Coach

Doctrine

A report may cite any of these as doctrine-N.

1. doctrine-1Contract freeze and fingerprint discipline

   The policy I/O contract (observation layout, scales, history semantics, action pipeline) is frozen and fingerprinted; every exported policy is stamped and verified; contract changes ship as new versioned profiles that leave old artifacts bit-identical, and old policies run forever under their era's pinned profile.

   Case. The 215-dim omni contract was frozen with a three-machine digest; the one contract-level extension (lateral feed-forward) went in as a new `omni_ff` profile with the old profile provably untouched, and the contract checker caught two real wiring bugs before any training (`contract-freeze-and-checker`). A silently changed gait-clock default would have fed old policies a 25% slower clock - closed by pinned legacy profiles (`legacy-profile-pinning`). A stale derived USD forked plant mass 2.2% until an automated source-vs-derived instrument gated it (`derived-asset-staleness-check`). A gain profile is part of the closed loop a policy was trained in and belongs in its stamp; the recovery line's anchored authority was left out of its manifest and recorded as the gap not to repeat (`gain-profile-belongs-in-the-stamp`), and a second policy behind a deploy-side switch made the handoff state itself a contract (`recovery-two-policies-and-a-state-machine`, `walk-recovery-fsm-handoff`).

   Coach application. On any proposal touching obs/action semantics, defaults, or derived assets: demand the version/profile plan, the fingerprint update, and the checker extension in the same change; flag any old artifact that would run under new defaults.

   contract-freeze-and-checkerlegacy-profile-pinningderived-asset-staleness-checkgain-profile-belongs-in-the-stamprecovery-two-policies-and-a-state-machinewalk-recovery-fsm-handoff

2. doctrine-2Attribution by resolved training params - never eval-override knobs

   Capability differences between lineages are explained only by digging each lineage's *resolved* training configuration and eliminating columns; evaluation-side override knobs (kd-scale, power-scale, cycle-time) act on the plant for *every* policy and may serve as deployment mitigations but never as explanations.

   Case. Low-friction robustness across 8 lineages x 3840 cells was traced to kd DR *bandwidth* - every lineage had ground friction pinned to (1.0,1.0), so "trained friction" could not be the axis; the parameter axis and the plant axis were explicitly separated after the first attribution conflated them (`kd-bandwidth-mu-law-attribution`). "Weak turning" on hardware was a power-scale plant effect, not a training gap (`deploy-knob-attribution-before-retraining`); slowing the deploy clock was out-of-distribution, not a feature (`cycle-time-override-is-ood`). The ground truth for what a run trained under is the logged per-run config, not the source tree (`resolved-config-is-source-of-truth`).

   Coach application. Whenever asked "why is lineage A better", require the resolved-param table first; kill zero-variance columns; refuse explanations phrased in eval-knob terms; when a knob helps, label it deployment mitigation.

   kd-bandwidth-mu-law-attributiondeploy-knob-attribution-before-retrainingcycle-time-override-is-oodresolved-config-is-source-of-truth

3. doctrine-3PASS gates become constraints; FAIL gates become objectives

   Once a skill passes its gate, that gate converts into a standing regression constraint (budget <= 2/20 against the parent baseline) for all later training; gates currently failing are the only legitimate objectives of the next rung.

   Case. The C ladder ran one frozen 13-cell x 20-seed matrix at every rung with promotion = "new skill PASS and old skills within regression budget"; C1 was stopped and re-rooted precisely because it trained away the root's backward PASS (`fixed-acceptance-matrix-per-rung`, `preregistered-stop-criteria-per-rung`). The C4 product shipped only at 260/260 cells with zero regression.

   Coach application. Keep the ledger: every PASS adds a constraint row; propose rungs only against FAIL rows; treat any constraint violation as stop-and-attribute, never "the next rung might win it back".

   fixed-acceptance-matrix-per-rungpreregistered-stop-criteria-per-rung

4. doctrine-4One variable per ladder rung - counted against what the checkpoint saw

   A rung changes one variable, where "one" is counted against the checkpoint's actual training state, not against the current config's diff; batching is allowed only when each change owns a disjoint symptom space with a pre-registered ablation order.

   Case. Two rungs failed identically because resuming s1e-500 under the evolved config silently added four plant variables the checkpoint had never seen ("单变量纪律不只看「我改了什么」,还要看「checkpoint 见过什么」" - `resume-state-dr-audit`). v8 legally batched four orthogonal fixes with a written ablation order (`orthogonal-batch-with-ablation-order`); v9 spent one run completing a 2x2 factorial so either outcome convicted a factor (`fill-the-missing-factorial-cell`); v10b's three-way ablation wrongfully convicted the clock and had to be retried fairly.

   Coach application. Before any resume: diff cfg against the checkpoint's logged training state. Before any batch: require the symptom-ownership map and ablation order in writing.

   resume-state-dr-auditorthogonal-batch-with-ablation-orderfill-the-missing-factorial-cell

5. doctrine-5Pre-register risks, readings, and stop criteria before the ladder

   Before a ladder or risky rung, write down the known risks, the interpretation of every plausible outcome, and hit-any-one stop criteria - frozen before training, tightened when priors say results should come fast.

   Case. The C ladder opened with three numbered risks including the exact falsification condition for its own root choice; A/B arms carried "预注册读法(事后不改)" tables; a level expected to fail was run anyway for its pre-registered diagnostic value (`preregister-risks-and-fork-readings`). Stop criteria caught C4-redo rungs at +200 instead of full caps (`preregistered-stop-criteria-per-rung`); hardware sessions pre-registered per-config expected signatures and the disagreement rule "不改结论改账" (`preregistered-real-expectations`, `feasibility-accounts-lock-design-point`).

   Coach application. Refuse to open a rung without the written risk/reading/ stop block; after results, read conclusions off the pre-registered table and flag any post-hoc reinterpretation.

   preregister-risks-and-fork-readingspreregistered-stop-criteria-per-rungpreregistered-real-expectationsfeasibility-accounts-lock-design-point

6. doctrine-6Plant parameters are measured, never invented

   Every plant number carries measurement provenance: armature = N^2 x rotor inertia from no-load tests, friction split by rig and by API column, torque limits shaped by per-joint gait peaks, latency traced through the real pipeline, masses weighed - and DR bands are additive around the measured nominal, sized to the measured dispersion.

   Case. Guessed friction was 2.5x low and guessed damping 5x high (`friction-measured-not-guessed`); armature had been 0 with a 9:1 gearbox (81x reflected inertia, `armature-n2-rotor-inertia`); a uniform torque derating was "the wrong shape" vs measured peaks (`torque-limit-shape-by-measured-peaks`); the delay implementation itself was a wrong plant for a whole lineage (`latency-lerp-reverse-extrapolation`); the run design point was locked by three accounts including the tau_limit/kd speed ceiling (`feasibility-accounts-lock-design-point`); identified friction had to land in the right simulator API columns to act at all (`sim-api-friction-columns`). The recovery and one-leg lines opened with the same kind of accounts before any reward existed - a connected static path and the torque along it for an armless get-up, and the gains single support needs to be holdable at all (`get-up-feasibility-accounts-before-training`, `single-support-gain-authority-probe`).

   Coach application. For any plant value in a config review, ask "measured how?"; reject absolute ranges with no nominal; check API column mapping and derived-asset regeneration whenever measured values land.

   friction-measured-not-guessedarmature-n2-rotor-inertiatorque-limit-shape-by-measured-peakslatency-lerp-reverse-extrapolationfeasibility-accounts-lock-design-pointsim-api-friction-columnsget-up-feasibility-accounts-before-trainingsingle-support-gain-authority-probe

7. doctrine-7Sim2sim gate before sim2real - under deployment conditions

   Every checkpoint passes a second, independently built simulator before hardware, and both the gate and the smoke loop run under the measured deployment conditions (real pipeline delay, honest contact parameters, the deployment gain/power profile).

   Case. The standing order "先sim2sim 再sim2real" (`sim2sim-gate-before-sim2real`); acceptance flipped to match hardware only under measured condim/torsional friction (`eval-plant-honesty-contact-params`); gates moved permanently to `--delay 2` after the kicking incident (`pipeline-latency-is-plant-not-dr`); and the harness itself must be audited - a frame-convention bug in the cross-sim evaluator invalidated a whole line of verdicts (`body-frame-velocity-api-audit`). The recovery line's second simulator caught a torque penalty paid for by bracing the legs together (`torque-penalty-bought-by-leg-bracing`), and a 1.8x torque disagreement between the two plants stayed binding because its one surviving explanation was never tested (`torque-disagreement-between-simulators-unresolved`).

   Coach application. Block any hardware request lacking a second-sim PASS at deployment conditions; when sim2sim and training-side metrics disagree, treat the evaluator as a suspect too.

   sim2sim-gate-before-sim2realeval-plant-honesty-contact-paramspipeline-latency-is-plant-not-drbody-frame-velocity-api-audittorque-penalty-bought-by-leg-bracingtorque-disagreement-between-simulators-unresolved

8. doctrine-8Observation honesty - the actor's inputs are a hardware contract

   The actor observes only signals the real robot produces with realistic noise; privileged truths go to the critic; history windows are estimators and must train under plant variation; rewards on quantities the actor cannot observe buy only average suppression, never closed-loop correction.

   Case. Ground-truth velocity/forces went critic-only (`observation-honesty-critic-only`); frame_hist under zero DR memorized the trainer's plant fingerprint - 0/20 transfer (`history-obs-needs-plant-variation`); world-frame yaw rewards could not teach pull-back because heading is unobservable to the actor - correction was routed to the deploy outer loop instead of breaking the contract (`reward-observability-limit`, `deploy-heading-loop-and-align-training`).

   Coach application. Audit every actor-obs element for hardware existence; require minimal plant jitter whenever history/recurrence exists; for each reward, ask "can the actor see this error?" and route correction tasks to outer loops.

   observation-honesty-critic-onlyhistory-obs-needs-plant-variationreward-observability-limitdeploy-heading-loop-and-align-training

9. doctrine-9Reward economics are audited in realized currency

   Reward design decisions are made on realized per-step magnitudes under the actual policy and command distribution: price the do-nothing optimum before adding a mode, compare achieved values to the computed ignore-floor, calibrate thresholds between measured healthy and sick distributions, and ship every new penalty with a withdrawal clause.

   Case. feet_air_time at weight 2.0 realized 0.038 vs tracking 1.2 - drag was rational (`realized-contribution-audit`); ignoring a vy command cost 28-180x less than ignoring vx until a gated tracking term was added (`reward-cost-of-ignoring-audit`, `gate-new-reward-terms-by-command`); achieved-vs-floor separated "never learned" from "priced out" (`ignore-floor-diagnosis`); the foot-distance wall was placed between measured healthy (0.6% tax) and sick (55%) policies (`calibrate-threshold-between-healthy-and-sick`); the landing penalty carried a pre-registered stand-down condition and actually stood down (`calibration-threshold-with-withdrawal-clause`); two clearance terms were inert until zero-points and gate occupancy were checked (`inert-reward-term-audit`). A get-up policy sat because three gated terms paid the seated pose 84% of the return and the one term that could tell sitting from standing was an exp kernel reading 4.6e-5 at the real error (`seated-basin-dead-exp-kernel`); a torque-tail term was weighted by its measured steady value beside a peer term after the estimate proved 12x off (`tail-torque-needs-hinge-on-computed-demand`).

   Coach application. Never discuss weights in the abstract: demand the realized-contribution table, the ignore-floor number, and the healthy-pay calibration before any reward edit is approved.

   realized-contribution-auditreward-cost-of-ignoring-auditgate-new-reward-terms-by-commandignore-floor-diagnosiscalibrate-threshold-between-healthy-and-sickcalibration-threshold-with-withdrawal-clauseinert-reward-term-auditseated-basin-dead-exp-kerneltail-torque-needs-hinge-on-computed-demand

10. doctrine-10The zero-cost option must be the desired behavior

    For every penalty, name what the zero-cost option is; penalize failure events (slip, saturation excess, contact in flight windows), never the motion or joints that healthy behavior uses; make degenerate strategies fatal via termination where penalties cannot price them out.

    Case. Joint-usage penalties for drift taxed a 1.4%-of-momentum channel 2.7/step and collapsed training; the slip penalty costs a non-slipping gait exactly zero (`penalize-the-slip-not-the-joint`). A frozen-at-clamp joint pays zero action-rate forever - only a pre-clip saturation penalty flips the cheat economics (`saturation-cheating-zero-rate-cost`). Ungated phase shaping made standing 42x more expensive than stepping and cooked the hip motors (`moving-gate-42x-stand-tax`); crouch-shuffling lived until a height termination deleted it (`termination-closes-degenerate-basin`). A gated penalty is an exit: the policy parked just outside an uprightness gate, then just under a height gate, to stop paying a stance tax, and only a positive band plus an always-on guard closed both (`penalty-gate-is-an-escape-hatch`); a soft-limit penalty that charged the standing pose itself bought a 4.1 deg lean (`soft-limit-penalty-charges-nominal-pose`); an unpriced foot attitude was spent on edge-standing (`unpriced-foot-attitude-is-a-free-variable`); and the one-leg line listed its cheapest cheats before training and still met one through a zero-gradient band (`enumerate-cheapest-cheats-before-training`, `binary-band-reward-fake-touchdown`).

    Coach application. Run the "零代价的选项是什么" audit on every proposed term; convert motion taxes into event-conditional penalties; check the termination set against each known degenerate strategy.

    penalize-the-slip-not-the-jointsaturation-cheating-zero-rate-costmoving-gate-42x-stand-taxtermination-closes-degenerate-basinpenalty-gate-is-an-escape-hatchsoft-limit-penalty-charges-nominal-poseunpriced-foot-attitude-is-a-free-variableenumerate-cheapest-cheats-before-trainingbinary-band-reward-fake-touchdown

11. doctrine-11Measurement discipline: independent referees, signs, distributions

    A disputed measurement is adjudicated only by an independent algorithm from raw state; directional ability requires sign-antisymmetry under command reversal; bimodal metrics are reported as mode shares (never medians, never 3 seeds); ratios are not comparable when totals change; reward values compare only within one command distribution; single chaotic events never cross machines.

    Case. The triple reversal - a good metric was "refuted" by a sibling metric that shared the disease (`independent-referee-for-metric-disputes`, `body-frame-velocity-api-audit`); same-signed +/- responses were bias, not turning (`same-sign-response-is-yaw-bias`); the swing median sat in a bimodal gap (`median-hides-bimodal-distribution`); "v6 is jitterier" died on absolute energies (`ratio-metrics-need-absolute-check`); yaw gain measured 15x wrong in an oscillating frame (`heading-integral-not-body-rate`); a 44% improvement evaporated under same-distribution comparison (`same-distribution-reward-comparison`); drift direction was a limit cycle (`multiseed-sign-test-for-drift`); a cross-machine push cliff was chaos (`single-impulse-recovery-is-chaotic`).

    Coach application. Before accepting any surprising number: ask for the independent recomputation, the sign pair, the distribution shape, and the comparison conditions. Retract in writing when a metric falls.

    independent-referee-for-metric-disputesbody-frame-velocity-api-auditsame-sign-response-is-yaw-biasmedian-hides-bimodal-distributionratio-metrics-need-absolute-checkheading-integral-not-body-ratesame-distribution-reward-comparisonmultiseed-sign-test-for-driftsingle-impulse-recovery-is-chaotic

12. doctrine-12The deployment pipeline is plant

    Irreducible pipeline properties - action latency, rate limits, power/torque scaling, teleop command mappings - are part of the nominal plant, modeled from day one and reproduced in every gate; deploy-side scalings are crutches that flag unmodeled plant, and they cannot be algebraically folded into training constants.

    Case. Right-leg kicking was over-trained-delay x loop gain; power 0.8 was a gain-reduction crutch that retired when the delay was modeled (`pipeline-latency-is-plant-not-dr`); power derating damages non-forward axes first (`power-scale-hurts-nonforward-axes`); training at 0.4 scale as the "twin" of deploying 0.5 x 0.8 collapsed 0/20 (`deploy-scaling-not-training-equivalent`); one shared teleop speed sent an out-of-band lateral command and the robot clipped its own foot (`teleop-command-band-per-axis`); the latency DR range had not even covered the measured pipeline (`latency-dr-covers-measured-pipeline`). A rate limiter added at deployment only clipped a policy that kept commanding (`deploy-rate-limiter-windup`); moved into training and anchored on the last command it became an integrator in the balance loop (`slew-anchor-is-an-integrator`); anchored on the measured angle it bounded torque and kept the bandwidth (`beta-anchored-action-target`). The walking lines' safe setting, power-scale 0.8, cut the ends of the recovery policy's full-range travel and left its spikes alone; a gain inside the trained band did the job (`power-derating-cuts-full-range-contract`).

    Coach application. Demand the measured pipeline latency/limits in the plant model and in gate conditions; treat every deploy-side derating as a question ("what is this compensating?"); block per-axis command sources that exceed training bands.

    pipeline-latency-is-plant-not-drpower-scale-hurts-nonforward-axesdeploy-scaling-not-training-equivalentteleop-command-band-per-axislatency-dr-covers-measured-pipelinedeploy-rate-limiter-windupslew-anchor-is-an-integratorbeta-anchored-action-targetpower-derating-cuts-full-range-contract

13. doctrine-13DR budget is finite; its distribution is the measured support

    Robustness is a conserved budget: disturbance training on an already-hardened lineage borrows from existing margins; DR ranges span the measured deployment support - no fictitious tails (they buy degenerate gaits), no single constants (they allow thin-margin specialization); harden the plant only after the task distribution is final.

    Case. The same push dose helped a narrow lineage and damaged a balanced one - budget conservation (`push-dr-conditional-budget-conservation`); wide latency tails bought drag-glide, constant values shipped 60% thinner tilt margins - the answer is a narrow band on the measured support (`dr-tail-plant-continuation`, `constant-value-dr-overfits-margin`); task-first ordering because hardening a soon-to-change task wastes budget (`task-shaping-before-plant-hardening`); COM randomization used deliberately as a behavior-shaping tool, and rolled back on symptom per its own contract (`com-randomization-forces-leg-spread`, `com-dr-rollback-on-symptom`). DR that is switched on can still be thin: the run policy fell in the frontal plane its gain-and-latency randomization never touched (`thin-dr-judged-by-channel-coverage`), and a friction priority settled under one action contract had to be re-measured under the next (`friction-priority-re-measured-after-plant-change`).

    Coach application. Before any DR rung: check the untrained policy against the spec, the lineage's current DR load, and the measured real-world range; after it: audit retained margins, not just the new tolerance.

    push-dr-conditional-budget-conservationdr-tail-plant-continuationconstant-value-dr-overfits-margintask-shaping-before-plant-hardeningcom-randomization-forces-leg-spreadcom-dr-rollback-on-symptomthin-dr-judged-by-channel-coveragefriction-priority-re-measured-after-plant-change

14. doctrine-14Gates measure what hardware feels: posture, margins, stripped assists

    Acceptance batteries carry posture-class rows (tilt max median, per-joint L/R asymmetry, temperature) beside task rows, graded margin columns beside binary gates, chirality scored per side, at least one condition that removes the environment's free stabilization, and validated predictive scalars promoted into the gate.

    Case. Three same-shaped judging errors - survival, displacement, wz-difference - all missed what the operator felt; posture metrics had the predictive power (`task-metrics-vs-posture-metrics`, `stand-gate-posture-not-survival`); binary survival saturated and hid a 60% margin gap (`constant-value-dr-overfits-margin`); v5 passed everything on the ground and failed suspended (`suspension-probe-removes-free-stabilizer`); the hip_roll (l+r) scalar predicted real drift direction and ordering and entered the battery (`hip-roll-sum-predicts-lateral-drift`); averages hide chirality (`chirality-scored-separately`); gait-quality gates are judged at speeds that demand a gait (`low-speed-commands-reward-dragging`). The recovery line added the rest of the kit: where failed episodes end, not only where they started (`end-state-confusion-matrix`); a frozen acceptance distribution with a pinned seed (`frozen-acceptance-distribution-and-pinned-seed`); video of the metric rollout itself (`video-as-acceptance-record`); and the admission that a 10 s episode cannot see a stance that fails after a minute (`episode-length-bounds-what-a-gate-sees`). The one-leg line removed a foot-spacing wall that no gate measured, and the feet met on hardware (`removed-wall-returns-on-hardware`).

    Coach application. Review every battery for posture rows, margin columns, per-side scoring, and an assist-stripped condition; when operator feel and gates disagree, suspect the metric class first.

    task-metrics-vs-posture-metricsstand-gate-posture-not-survivalconstant-value-dr-overfits-marginsuspension-probe-removes-free-stabilizerhip-roll-sum-predicts-lateral-driftchirality-scored-separatelylow-speed-commands-reward-draggingend-state-confusion-matrixfrozen-acceptance-distribution-and-pinned-seedvideo-as-acceptance-recordepisode-length-bounds-what-a-gate-seesremoved-wall-returns-on-hardware

15. doctrine-15Fork and root selection: recoverability, maturity, frozen rewards

    Choose fork roots by which candidate's deficits the coming training can pay back (precision is recoverable; lost plasticity, symmetry, and margins are not); prefer mature checkpoints as roots even when younger ones score better as products; never fine-tune through a reward change - continuation is legal only with the reward frozen and plant/DR widening one rung at a time.

    Case. s1e-500 beat higher-precision candidates because its exclusive strengths were unrecoverable (`fork-root-recoverable-shortfall`); the b300 arm proved maturity is capital against adaptation shock (`root-maturity-vs-product-quality`); the B-arm scatter/half-recover/collapse signature falsified reward-change fine-tuning and drew the legal boundary for S2 continuation (`fine-tune-reward-change-falsified`).

    Coach application. For root debates, build the exclusive-strengths table and ask "which side can be trained back?"; require dual-arm evidence for maturity claims; classify any proposed continuation as reward-frozen or not before approving.

    fork-root-recoverable-shortfallroot-maturity-vs-product-qualityfine-tune-reward-change-falsified

16. doctrine-16Curricula: verified engagement, lineage counters, disease-phase gating

    Automatic curricula must prove they engage (a saturated ratchet is constant DR wearing a curriculum's name); every ramp counts lineage-cumulative progress, not per-process steps; penalties aimed at late-stage pathologies ramp in after exploration noise decays; difficulty rises on measured per-stratum success, never on schedule.

    Case. The s1f ratchet capped at iter 248 and never engaged (`auto-curriculum-engagement-check`); the saturation ramp re-fired at +600 after every resume and no shipped product ever saw the penalty (`curriculum-counter-lineage-steps`); the same penalty worked once gated to the disease phase and became an untouchable mechanism (`gate-penalties-to-the-disease-phase`); record-high aggregate reward hid a fully-failing delay stratum (`aggregate-metrics-mask-subgroup-failure`); bucket share is not a gradient lever (`bucket-share-is-not-a-gradient-lever`). An assist curriculum keyed to a pooled success share was withdrawn on the strength of the categories that already worked (`curriculum-criterion-conditioned-on-lagging-category`); a pace set by per-step income moved only when that income was time-gated (`per-step-income-drives-speed-time-gate`), and the same gate had to be retired in a lineage without the disease (`time-gate-vs-wide-stance-retire-the-fix`).

    Coach application. Ask every curriculum three questions: does it engage (show the internal state)? what does it count (process or lineage)? when is it present (against the pathology's phase)? Check where shipped checkpoints sit relative to every ramp.

    auto-curriculum-engagement-checkcurriculum-counter-lineage-stepsgate-penalties-to-the-disease-phaseaggregate-metrics-mask-subgroup-failurebucket-share-is-not-a-gradient-levercurriculum-criterion-conditioned-on-lagging-categoryper-step-income-drives-speed-time-gatetime-gate-vs-wide-stance-retire-the-fix

17. doctrine-17Probe before training: feasibility first, hypotheses in tables

    After two failed training attempts at a skill, stop training: demonstrate the behavior open-loop, enumerate hypotheses in a written table audited against actual configs cheapest-first, race one probe per side of the sim2real boundary for hardware-only pathologies, and use suspended tests to acquit or convict actuators before blaming authority.

    Case. "在黑暗里试钥匙" - four sidewalk rungs failed until an open-loop probe separated exploration/waveform/authority in one experiment (`open-loop-probe-before-reward-tuning`); the foot-drag mystery fell to a seven-hypothesis config audit (`hypothesis-table-code-audit`); the period-doubling was resolved by racing a reward-side and a plant-side evidence line - and both paid off, one per sub-case (`period-doubling-evidence-race`); the suspended test acquitted the roll actuator in one measurement (`suspended-test-isolates-actuator-authority`). A read-only configuration probe told a wall from a slope in the recovery line's seated basin (`configuration-probe-wall-not-slope`), and the fix it pointed to - where the feet are - took prone from 0/159 to 158/159 (`prone-dead-end-is-foot-placement`); a knob that did not move its variable was recorded as no test of the idea (`dof-vel-penalty-is-not-a-pacing-knob`).

    Coach application. When a skill resists training, prescribe the probe before any further reward edits; require verified target trajectories before imitation terms; keep a falsified-fixes list so closed roads stay closed (`amplitude-cut-falsified-yaw-fix`).

    open-loop-probe-before-reward-tuninghypothesis-table-code-auditperiod-doubling-evidence-racesuspended-test-isolates-actuator-authorityconfiguration-probe-wall-not-slopeprone-dead-end-is-foot-placementdof-vel-penalty-is-not-a-pacing-knobamplitude-cut-falsified-yaw-fix

18. doctrine-18External advice is recomputed locally; values transfer as ratios

    Every external suggestion is classified adopt / already-have / modify / trap by recomputing its claim on the local reward table and probe data; numeric values transfer only as dimensionless ratios (to tracking weight, leg length, sqrt(gL), control rate); citations are verified to exist.

    Case. "Start vy very small" would have destroyed sidewalk learning on this reward table - the gradient scales quadratically (`external-advice-audit-against-own-arithmetic`); swing-height targets and weights transferred correctly only through leg-length and tracking-ratio scaling (`transfer-ratios-not-absolutes`); the "6-step delay" was refused for lacking a control rate (`latency-dr-covers-measured-pipeline`); a borrowed reference's structure was FK-verified and its amplitude re-derived from the division of labor (`reference-structure-fk-amplitude-division`); retrieval agents fabricated verbatim arXiv quotes - only source-verifiable material was used; and one dismissed suggestion later proved right for a different mechanism, and was credited (`cycle-average-tracking-for-gait-quantities`). An advisor's staged state machine turned out to exist in none of the three papers it cited, and reading them changed the plan (`advisor-paraphrase-vs-paper`).

    Coach application. Intercept every "paper X does Y" with the local recomputation; convert absolutes to ratios before comparison; verify quotes; revisit dismissed advice when new mechanisms appear.

    external-advice-audit-against-own-arithmetictransfer-ratios-not-absoluteslatency-dr-covers-measured-pipelinereference-structure-fk-amplitude-divisioncycle-average-tracking-for-gait-quantitiesadvisor-paraphrase-vs-paper

19. doctrine-19Hardware sessions are scripted experiments, not tuning sessions

    Real-robot time executes a pre-registered matrix: risk-ordered (baseline first, fragile last with a spotter), stage-gated (suspended smoke before ground), A/B sessions bracketed by a repeated reference run, operators briefed on measured zero-command and untrained-axis behavior, chirality-aware disturbance protocols, no field tuning - the only legal field changes are scripted, single-variable, and self-reversing.

    Case. The S2 acceptance sheet (`risk-ordered-real-deployment`, `battery-bracketed-real-ab`, `know-zero-command-behavior`, `push-test-chirality-protocol`, `no-field-tuning-protocol`); the RAM-only torque experiment with automatic power-cycle rollback (`reversible-single-variable-field-experiments`); and the sim-veto rule - even sim's condemnations get one safeguarded hardware check when they judge the purpose-built configuration (`sim-veto-needs-real-confirmation`). The recovery line's first real run went ahead with its preconditions unmet and was stopped as dangerous (`first-real-get-up-violent-stage-one-policy`); after it: a staged hang, mat and floor protocol (`staged-hang-mat-floor-for-get-up`), a fixed power-cycle pre-flight and two-machine discipline (`power-cycle-preflight`, `two-machine-config-discipline`), a fall guard replaced rather than switched off (`fall-guard-becomes-a-state`), and logs that are part of the run (`hardware-log-is-the-attribution-input`).

    Coach application. Turn every hardware request into a runbook with order, gates, brackets, briefing, and anomaly plays; refuse improvised parameter changes on the floor.

    risk-ordered-real-deploymentbattery-bracketed-real-abknow-zero-command-behaviorpush-test-chirality-protocolno-field-tuning-protocolreversible-single-variable-field-experimentssim-veto-needs-real-confirmationfirst-real-get-up-violent-stage-one-policystaged-hang-mat-floor-for-get-uppower-cycle-preflighttwo-machine-config-disciplinefall-guard-becomes-a-statehardware-log-is-the-attribution-input

20. doctrine-20Close questions in writing; restart when the debt is structural

    Audited questions get frozen verdicts with citable wording and an explicit reopening bar; hardware verdicts are dated by deployment-stack and calibration state and expire when those change; and when successive rungs shuffle symptoms without net progress, freeze the lineage as regression baselines, pay the structural debts, and retrain minimal - carrying laws and instruments, not weights.

    Case. The chirality and COM questions were closed with frozen wording and "no reopening without new hard evidence" (`frozen-verdicts-semantic-boundaries`); v5/v6's condemnations expired with the deploy stack (`stale-verdicts-under-old-stack`); a 2-degree calibration fix moved the whole runnable envelope (`zero-offset-calibration-shifts-envelope`); plant upgrades are era boundaries with paired re-baselining (`plant-swap-invariants-vs-shifts`); and the 2026-08-05 reset froze v5-v11, fixed the latency FIFO / manifest / sampling / reward-table debts, and restarted - producing the lineage that reached hardware SOTA (`freeze-lineage-fix-structure-restart`, `minimal-reward-table-with-provenance`). The recovery line's real-robot verdicts ended up in three places that disagree, one of them an undated note in a command file (`write-hardware-verdicts-back`).

    Coach application. Maintain the closed-questions ledger and quote it when symptoms recur; stamp verdicts with stack/calibration versions; when a team is three rungs into symptom-shuffling, raise the restart question explicitly with the freeze-fix-restart pattern.

    frozen-verdicts-semantic-boundariesstale-verdicts-under-old-stackzero-offset-calibration-shifts-envelopeplant-swap-invariants-vs-shiftsfreeze-lineage-fix-structure-restartminimal-reward-table-with-provenancewrite-hardware-verdicts-back

21. doctrine-21Name the quantity in the space it lives in

    A goal, reward term or acceptance criterion about the feet, the base or the contact state is computed from the quantity itself - world poses, forces, per-category outcomes - never through a joint-angle, single-signal or pooled stand-in that assumes everything else sits at nominal; and every detector is validated on a behaviour known not to contain the event before it becomes a gate.

    Case. The recovery line was caught three times: |ankle roll| as "flat feet" sold stance width and the real robot slid into the splits, a hip-roll criterion was confounded by 50 deg of yaw, and the joint table said 0.271 m where the feet were 0.159 m apart; task-space terms produced the first flat, wide stance (`joint-space-proxy-for-task-space-quantity`). Flight detection lied in both directions across two lines - foot height flagged 40% false flight on a walking gait, contact force alone flagged slip chatter as hops (`contact-detector-single-signal-lies`). A pooled height average described a robot that did not exist - six in ten standing, four in ten sitting (`zero-partial-credit-is-not-an-iteration-problem`) - and the walking line had learned the same lesson on yaw rate (`heading-integral-not-body-rate`).

    Coach application. For every reward term and gate row, ask what physical quantity it stands for and whether it is measured directly; flag joint-space or single-signal stand-ins for task-space goals, ask for a detector validated on a negative control, and split pooled metrics by category before reading them.

    joint-space-proxy-for-task-space-quantitycontact-detector-single-signal-lieszero-partial-credit-is-not-an-iteration-problemheading-integral-not-body-rate

22. doctrine-22Continuation needs a live gradient; a release is chosen by a scan

    Continue a converged policy only on a change that creates a live gradient, on a short budget, with every checkpoint scanned on the transfer axis; choose a release by running the full battery over a band of checkpoints and stop on signals, never by taking the last one; and when edits to the terminal phase cannot move a behaviour, roll back and retrain with the constraint present from the start, keeping the order in which the lineage acquired its mechanisms as explicit curriculum phases.

    Case. A continuation with no new gradient drifted MuJoCo transfer from 100/98% to 80/28% while every Isaac gate stayed perfect, and a live-gradient continuation at the same depth kept it (`converged-continuation-is-poison`). One-leg checkpoints 100 iterations apart failed 1 and 38 of 40 cells, and late ones degraded (`checkpoint-choice-is-a-full-gate-scan`). Four in-lineage stance fixes failed because the stance was the end of the get-up path, and from scratch it grew right (`stance-decided-by-get-up-path`); fixes stacked on degraded states were rolled back by the user (`stop-stacking-roll-back-and-audit`); and the lineage's final recipe, trained from scratch in one run, sat at 0% because the order of its curriculum was part of the product (`curriculum-history-is-part-of-the-product`). The omni line's short adaptation budgets and mature roots are the same law seen from the other side (`continuation-budget-not-from-zero`, `root-maturity-vs-product-quality`).

    Coach application. Before approving a continuation, ask for the new gradient, the budget and the transfer axis in the scan; before approving a release, ask for the scan; after three rungs without progress on the target, propose rolling back to the last good checkpoint and a from-scratch phase plan instead of a fourth patch.

    converged-continuation-is-poisoncheckpoint-choice-is-a-full-gate-scanstance-decided-by-get-up-pathstop-stacking-roll-back-and-auditcurriculum-history-is-part-of-the-productcontinuation-budget-not-from-zeroroot-maturity-vs-product-quality

Experience cards

65 cards matching “penalize-the-slip-not-the-joint”.

• Decompose the offending quantity by channel first - then penalize the failure event, not the jointspenalize-the-slip-not-the-joint

  Mechanism understoodwalkreward-shapingreward-shapingattribution

  Before penalizing motion to fix a side effect, measure which channels actually carry the offending quantity; prefer penalties conditioned on the failure event that are exactly zero for healthy behavior - and do not medicate behaviors that measurement shows are not sick.

  Symptom

  Heading drift with support-foot yaw slip (v5: 212-284 deg accumulated over 15 s); the previous v6 draft had attacked it by penalizing lateral joints (a roll 4.0 / yaw 2.0 "home" group) - which collapsed training into the standing basin.

  Context

  Before choosing the penalty target, the yaw angular momentum was decomposed by joint group with MuJoCo subtree_angmom weighted by real walking joint velocities: pitch-class joints (hip_pitch + knee) carry 95.3%, hip_roll 3.3%, hip_yaw 1.4%. The failed "home" group had been taxing 2.7/step to manage a 4.7% channel. The replacement, feet_yaw_slip (-0.2, |support-foot yaw rate| while in contact), targets the failure event itself and - decisively - costs a non-slipping gait exactly zero, which "横向回家组做不到". The same rung's do-not-do table applied the complementary principle to foot spacing: measured 196-214 mm, stable, no crossing - "没病不吃药" (no disease, no medicine).

  Change

  Removed joint-usage penalties for the drift problem; added the event-conditional slip penalty (-0.2, realized tax 0.141/step = 12% of tracking) alongside the existing linear-slip term.

  Outcome

  Turn-gain left/right difference improved 70% -> 19% and heading 185 -> 60.3 deg by v6 without a standing-basin collapse; the 2.7/step lateral tax never returned.

  Mechanism

  Penalizing joints taxes every use of a channel including healthy use, and if the channel carries little of the offending quantity the tax buys nothing while pushing the optimum toward immobility. An event-conditional penalty (slip while in contact) prices only the failure, leaving the healthy gait's cost surface untouched - and the channel decomposition tells you in advance whether a joint-side fix can even work.

  Applies when

  • choosing a penalty target for drift/slip/impact problems
  • a proposed penalty taxes joints or motions rather than failure events
  • a previous joint-penalty attempt collapsed the gait

  “pitch 类 (hip_pitch + knee) 占偏航角动量 95.3% … hip_yaw 1.4% … 压 hip_yaw 是管 1.4% 的通道收 2.7/步 的税 —— 上一轮正是这样把策略推进了站立盆地。滑移项不惩罚走路: 不打滑的步态代价为零, 这是横向"回家"组做不到的。”

• Knee swing collapsed because it directly trades against the slip penalty - price the conflict explicitly and clamp what reward cannot holdknee-swing-vs-slip-pricing

  Mechanism understoodwalkreward-shapingreward-shapingattribution

  When a behavior collapses as another metric improves, look for the term pair trading them and set their price ratio deliberately (with escalation and reverse tripwires pre-registered); where the policy actively spends action budget to undo your target, stop paying more reward and clamp the target space structurally.

  Symptom

  Knee peak-to-peak swing collapsed across generations - v5 33 deg, v10 26-30, v10b 7-8, v11 6.5-8.6 - and rolling the clock back did not recover it, acquitting the clock; the collapse tracked the gated slip penalty instead: "屈膝与不打滑在当前奖励里直接对抗" - v10b's excellent 93 deg slip was purchased with knee amplitude.

  Context

  Reward-side flexion fixes had failed three times: raising reference amplitude backfired twice (v9/v11), and v11's deep-squat default was actively fought by the policy - it spent 0.68 of action budget pulling the squat straight ("被策略花 0.68 动作拉直反杀"). v12's design accepted the conflict as real and attacked on two tracks: (1) ECONOMICS - a direct knee_swing_amplitude reward (+0.3, target 0.55 rad, capped at 0.6/step = 55% of tracking), explicitly opposed to the slip penalty by design ("显式对立——这正是设计:v12 就是这场对抗的定价实验"), with an escalation ladder (K +0.3 -> +0.5, then slip -0.5 -> -0.3, one layer at a time) and a reverse tripwire (slip telemetry back at v10 levels -> slip weight to -0.8, accept ~20 deg knee compromise); (2) STRUCTURE - knee target bounds [0.2, 0.9] rad so full straightening is physically impossible (straightest 11.5 deg) and the 0.68 fighting budget is released. A bonus falsifiable prediction was attached: phase-lock strength tracks amplitude (v9_probe 48 deg locked 2.5 Hz; v11 low-amplitude 1.36 Hz unlocked), so if K works, hardware phase-lock should return - one change, two verdicts.

  Change

  knee_swing_amplitude reward + knee target clamp + pre-registered escalation/reverse levers; the failed reward-side-only approach retired.

  Outcome

  The lineage was frozen before v12 trained (strategic reset), but the diagnosis stands as the walk line's clearest example of two reward terms trading a behavior between them, with the pricing experiment and structural clamp fully designed and calibrated.

  Mechanism

  When two terms price opposite aspects of one motion (swing amplitude creates yaw momentum that becomes slip), the optimizer settles wherever the price ratio puts it - patching one side moves the equilibrium, not the conflict. Explicit pricing makes the trade a designed quantity; structural clamps remove the regions where the policy spends budget fighting the designer.

  Conflicts

  The pricing experiment (K vs slip) was designed and calibrated but never trained - the 2026-08-05 reset suspended v12; the collapse attribution table and the 0.68-action counterattack are measured, the remedy's效果 is untested.

  Applies when

  • one gait quality degrades in lockstep with another's improvement
  • the policy visibly fights a default pose or reference
  • repeated reward-side fixes for the same behavior have failed

  “膝摆塌在 v10→v10b,头号嫌疑是门控滑移罚(四代实测膝 p2p:v5 33° / v10 26~30° / v10b 7~8° / v11 6.5~8.6°;退时钟没救回 → 非时钟)——"屈膝"与"不打滑"在当前奖励里直接对抗 … 奖励侧修屈膝已三败 … v11 深蹲 default 被策略花 0.68 动作拉直反杀”

• Three times a joint-angle stand-in for a foot-level quantity was gamed or lied - the absolute ankle roll sold stance width to buy flat feet, a hip-roll criterion was confounded by 50 deg of yaw, and the joint table said 0.271 m where the feet were 0.159 m apartjoint-space-proxy-for-task-space-quantity

  Replicatedrecoveryreward-shapingreward-shapingmeasurementreal-acceptance

  Express foot-level (task-space) goals and acceptance criteria in task space - link attitude and lateral spacing from world poses - never through joint angles that assume other joints are at zero, and measure the task-space value before trusting a joint-space estimate of it.

  Symptom

  The line's first real-robot get-up (v2_6, 2026-08-11) was "fairly stable", but after standing the feet were too close and the robot slid into the splits and fell several times; later reports added that it also got up through a split posture.

  Context

  (1) flat_feet penalized sum |q_ankle_roll|, but a flat foot is ankle roll compensating hip roll; the proxy taxed the compensated wide solution, and the untaxed combination was hips straight plus ankles at zero - flat and narrow. On hardware the lateral support shrank to hip width plus centimetres, lateral balance rested on 11 N*m ankle motors, and the feet slid apart. (2) The next rung's acceptance criterion "hip roll >= 20 deg" assumed zero hip yaw; at 50 deg of yaw the lateral contribution is x cos 50 ~ 0.64 - the same substitution again, inside a criterion. (3) A new task-space diagnostic reading the foot links' world poses measured v2_6c's stance at 0.159 m where the kinematic audit from joint angles had said 0.271 m (0.271 x cos 47 ~ 0.17).

  Change

  Rule written into the spec: task-space quantities are never expressed through joint-space proxies. V3.1's stance terms were all task-space: flat_feet_task from the foot links' world orientation, lateral foot spacing in metres, stand_pose stripped of both roll joints.

  Outcome

  From scratch with task-space terms (V3.1 P1c): lateral stance 0.355 m, foot residual tilt median 0 deg / P75 2.0 deg, all six criteria passing, mu 1.0-0.4 all 100%.

  Mechanism

  A joint proxy bundles the goal with everything else those joints do; the optimizer finds the combination the proxy does not tax, and a joint-based criterion silently assumes the other joints sit at their nominal.

  Applies when

  • rewarding flat feet, stance width, foot placement or end-effector pose
  • an acceptance criterion is written in joint angles for a geometric goal
  • joints with large yaw or coupled axes are involved

  “**病根 = 关节空间代理**:`flat_feet` 罚 Σ|q_ankle_roll|(§41 取的简易口径)。 "脚掌平"的运动学正解是 **踝滚补偿髋滚**(q_ankle_roll ≈ −q_hip_roll) … 代理把"脚平"和"站距"绑死在一起卖了。”

• Cutting swing amplitude 40% raised yaw-momentum demand 53% - the falsified fix is recorded so nobody walks that road againamplitude-cut-falsified-yaw-fix

  Mechanism understoodwalksim-evalmeasurementattributionreward-shaping

  Test gait fixes against the quantity the ground must actually supply (torque/force rates vs friction ceilings), not against kinematic proxies; record falsified fixes with their mechanism so the search space shrinks permanently.

  Symptom

  Support-foot yaw slip stayed at ~223 deg (vs 225 deg) after walk_v6 cut joint swing amplitudes by ~40% (hip_pitch 20.6->10.4 deg, knee 31.3->18.8 deg) - the change built on the theory "smaller swing = less yaw momentum to dump into the ground".

  Context

  Direct measurement inverted the theory: yaw-momentum amplitude ROSE 16% (+/-0.1000 -> +/-0.1159) and its rate of change rose 53% (1.86 -> 2.84 N*m demanded from the ground), pinned exactly at the foot's supply ceiling (2.8-3.3 N*m at mu 0.6-0.7) - so slip could not drop. The extra demand lives in higher harmonics: v6's crisper foot placement (better clearance 34 mm, lower landing force) shortens the momentum- exchange window, concentrating the same exchange into less time. The verdict was written as a closed road: "下一轮不要再走这个方向". An honest residue was also booked: WHY amplitude down but momentum up 16% remained unresolved, with the named next step (per-rigid-body decomposition of H_z, since per-joint RMS sensitivity ignores phase correlations).

  Change

  The "reduce amplitude to reduce yaw momentum" lever was removed from the planning space; future yaw-slip work redirected toward the supply side (friction) and momentum-rate mechanics.

  Outcome

  Slip unchanged (225 -> 223 deg); the falsification and its mechanism became a permanent constraint on the fix search space.

  Mechanism

  Ground yaw torque demand scales with the rate of change of angular momentum, not its amplitude; kinematic amplitude cuts that also sharpen contact timing can raise dH/dt while lowering range. When demand exceeds the friction-limited supply ceiling, slip is set by the ceiling, so demand-side changes below the ceiling do nothing visible.

  Applies when

  • attacking foot slip or yaw drift via gait shape changes
  • a fix targets an amplitude while the constraint is a rate
  • documenting a failed intervention after a version comparison

  “walk_v6 | ±0.1159 (+16%) | 2.50 Hz | 2.84 N·m (+53%) … 脚的供给上限 2.8~3.3 N·m(μ 0.6~0.7)—— v6 正好顶在天花板上, 所以滑移一点没降。… 结论: "减小摆动幅度以降低偏航动量"这条被 v6 证伪 —— 砍 39% 幅度, 需求反升 53%。下一轮不要再走这个方向。”

• An edge-triggered landing penalty missed the tail and fired after the harm - penalize overspeed continuously inside the contact windowpenalize-tail-before-touchdown

  Mechanism understoodwalkreward-shapingreward-shaping

  Penalties aimed at impact/violation events must (a) price the excess over a threshold, not the mean, and (b) be active on the approach (state-gated window), not triggered by the event - check your control rate can even see the event you are penalizing.

  Symptom

  The v7 landing penalty (vz^2 on the contact-force rising edge, weight -10) did not bite: landing-velocity 95th percentile stayed at 2.61 m/s against a 0.3 target.

  Context

  Two structural faults were identified: (1) it penalized the MEAN over sparse events - many soft landings dilute the occasional violent slam, while the damage (GRF peaks, motor peak load) lives in the tail; (2) it fired AFTER touchdown - at 50 Hz evaluation the rising edge is aliased by physics decimation, so the read vz is often the already-decelerated post-impact value: underestimated, and with no shaping gradient before contact. Replacement: continuous penalty while the sole is inside a height gate (h < 0.03 m): relu(-vz - 0.30) - only the excess over an allowed approach speed is penalized (tail only), and gradient exists for several frames BEFORE touchdown. The sole-height computation again subtracts the 0.0585 m link offset ("WALK_DIAGNOSIS 坑#1, 别再踩"); the edge-triggered version was kept as a diagnostic only.

  Change

  feet_landing_vel reformulated: edge-event vz^2 -> in-window relu(-vz - v_ok) with v_ok 0.30 (conservative vs the sqrt(L)-scaled human value ~0.19, to be tightened after passing), h_gate 0.03, weight unchanged -10.

  Outcome

  The failure analysis of the first form was written before the second was trained; the v_ok escalation path (0.30 -> 0.45 if the robot becomes afraid to land) was pre-registered in the risk table.

  Mechanism

  Sparse-event mean penalties optimize the average case while the constraint is a quantile; and any penalty evaluated only at/after a discrete event gives the optimizer no gradient along the approach trajectory that determines the event. A state-gated continuous excess penalty fixes both: it prices only violations and shapes the approach.

  Applies when

  • impact/landing penalties fail to move tail percentiles
  • a penalty is triggered by contact edges at a coarse control rate
  • designing constraint-style penalties for rare violent events

  “罚的是均值路径:上升沿是稀疏事件 … 大量软着陆稀释偶发猛砸;而伤害在尾部 … 罚在触地后:50 Hz 评一次,上升沿被物理 decimation 混叠,读到的 vz 常是撞完已减速的值——既低估,又没有触地前的塑形梯度。”

• Run acceptance under measured contact parameters - honest condim/torsional-friction flipped a false PASS into a real-matching FAILeval-plant-honesty-contact-params

  Mechanism understoodwalksim2sim-gatesim2simplant-calibrationgate-battery

  Pin the evaluation plant's contact model to measured values (contact dimension, torsional/rolling friction, mu) before trusting any gate that involves slip, impact, or drift - a gate can only fail a policy for physics its simulator contains.

  Symptom

  walk_v5 passed the old acceptance battery yet failed on the real robot (footfall force, drift, kicking) - the evaluation plant was flattering the policy.

  Context

  The battery was re-run under "honest contact parameters" - condim 4 (adding torsional contact) with measured torsional friction 0.035 - and v5 then FAILED exactly the rows corresponding to its real problems: heading 185 deg (limit 30), support-foot yaw slip 284 deg (limit 80), landing force 1.72x (limit 1.5x), suspended tilt 45.9 deg (limit 10). The slip physics depends on torsional friction, which the default contact model (condim 3) does not even simulate - a slip problem is invisible to an evaluator that cannot represent yaw friction at the foot. Term-sizing measurements for the new rewards were likewise taken under the same honest parameters (cmd 0.45, skipping the 5 s start transient).

  Change

  Acceptance harness pinned to condim 4 / torsion 0.035 (measured); verdicts issued under defaults declared non-citable for these rows.

  Outcome

  Sim acceptance verdicts began agreeing with hardware ("现在失败, 与真机一致"); the v6 fixes could be developed and validated against an evaluator that could actually see the disease.

  Mechanism

  An evaluator is a plant model too: contact dimensionality and friction values decide which failure modes exist in the simulation at all. Evaluating under default contact parameters tests the policy in a world where its real failure is physically impossible, producing structurally false PASSes.

  Applies when

  • sim acceptance passes policies that fail on hardware
  • slip/drift/impact gates run under default simulator contact settings
  • setting up a cross-simulator evaluation harness

  “accept_v2.py 已加三条判据, walk_v5 在诚实的接触参数下(--condim 4 --torsion 0.035)现在失败, 与真机一致:直行 15s 航向累计 <30° | 185° ✗ … 落脚力峰值 <1.5× 体重 | 1.72× ✗”

• A joint frozen at the action clamp pays zero action_rate forever - penalize pre-clip saturation to make the cheat cost moneysaturation-cheating-zero-rate-cost

  Mechanism understoodwalkreward-shapingreward-shapingaction-rategate-battery

  Whenever actions are clipped and any smoothness/rate penalty exists, add a pre-clip saturation penalty so living at the clamp costs more than oscillating - and audit for frozen-at-clamp joints (action std ~0, |a| at exactly the clip value) as a standing acceptance row.

  Symptom

  With action_rate_l2 raised to -0.2, walk_v7's hip_pitch actions froze at exactly +/-1.000 (the clamp), reproduced bit-for-bit on hardware (splits frozen at +/-0.35 rad); the gait-shaping term joint_pos_ref collapsed to 0.026-0.035. The repo had died in the same trap once before (walk_v0: four joints pinned at +/-1.0).

  Context

  Mechanism: a joint pinned at the clamp has action-rate cost exactly zero and forever zero - under a strong smoothness tax, "push to the clamp and freeze" becomes the dominant optimum. Lowering the weight (-0.2 -> -0.1) only reduces temptation; the frozen state still costs nothing, so the structural fix adds action_saturation = sum(relu( |a_raw| - 0.9)) at weight -1.0, computed on the PRE-clip network output - post-clip, |a|=1.01 and |a|=3 punish identically and the out-of-range gradient dies (v0's old disease: mean |a| 1.71 soaked in saturation). Economics: freezing at |a|=1.0 now pays 0.1/joint/step (two hips = 40% of alive) vs ~0.0004/step for the healthy reference oscillation - the cheat flips from free to ~250x negative. Honest limits were recorded: A1 does not forbid freezing at 0.89 (the anti-freeze pressure must come from the oscillation demand of joint_pos_ref), and the alternative "rate on post-clip target" was rejected as 换汤不换药 - a pinned target also has zero rate.

  Change

  v8-A: add action_saturation (-1.0, thresh 0.9, pre-clip) AND halve action_rate_l2 (-0.2 -> -0.1, still 3.3x the v5 value); success criterion pre-declared (joint_pos_ref telemetry returns to v6 scale).

  Outcome

  Booked as the structural repair of the v7 freeze; also fixed a config hygiene trap discovered on the way - action_rate was assigned twice in __post_init__ (v5 comment line then v7 line), merged to one assignment "别再留两处赋值给下次审计埋雷".

  Mechanism

  Clipping creates a zero-gradient, zero-cost absorbing region in action space; any penalty on action derivatives makes that region strictly optimal once entered. Only a penalty on clamp proximity itself (measured pre-clip so depth of violation is visible) restores a slope out of the absorbing region.

  Applies when

  • joints sit at exactly the action clip with near-zero variance
  • raising a smoothness penalty degrades gait amplitude
  • shaped-oscillation terms collapse after a rate-weight increase

  “钉死在钳位的关节 action_rate 代价精确为零且永远为零;−0.2 之下"推到钳位冻起来"成了压倒性最优 … 本仓第二次栽在同一坑(walk_v0 死于四关节钉死 ±1.0)。回调权重(−0.2→−0.1)只降低诱惑不消除作弊 … 算在 clip 前的原始网络输出上 … 作弊收支从"白赚"变成"倒贴 ~250 倍"。”

• A single-signal contact detector lied in both directions - foot height flagged 40% false flight on a walking gait, contact force alone flagged false flight during low-friction slip - so flight became force < 5 N AND sole height > 5 mmcontact-detector-single-signal-lies

  Replicatedrunsim-evalmeasurementgate-battery

  Define contact and flight events from two independent signals (force and geometry) in conjunction, validate the detector on a behaviour known not to contain the event before using it as a gate, and match the trainer's threshold when comparing across simulators.

  Symptom

  The run line needed a flight-fraction gate. The first MuJoCo version, "sole higher than 2 mm", measured 40% flight on a walking policy that never flies. Five weeks later the one-leg gate, using contact force alone, reported support-foot "flight" segments at mu 0.4 for a policy that was not hopping.

  Context

  During a walking step the toe lifts or the heel strikes with the foot pitched, so the ankle-roll origin rises a few mm while part of the sole still touches - height alone calls that flight. Switching to contact force < 5 N (the same threshold Isaac's contact reward uses) zeroed the false flight on walking. In the one-leg re-test every force-only "flight" segment had a measured sole height of 0.0 mm: the normal force chattered while slip corrections played out on low friction.

  Change

  Run line: flight = contact force < 5 N ("lift-off must be judged by contact force"). One-leg line (2026-09-16): flight = force < 5 N AND sole height > 5 mm, recorded as the same measurement lesson in the opposite direction; the gate's behavioural meaning was unchanged.

  Outcome

  With force-based detection the walking policy read 0.0 flight and the run policy's zero flight was confirmed by two plants; with the conjunctive definition the one-leg support-foot gate stopped reporting false hops.

  Mechanism

  Each signal has its own failure: geometry moves without leaving the ground (foot pitch), and forces drop without leaving the ground (slip chatter); requiring both removes both families of false positives.

  Applies when

  • writing a flight, lift-off, hop or slip detector for a gate
  • a gate reports an event the video does not show
  • reusing a detector on a different gait or floor friction

  “首版用**足底高度>2mm** 判离地, 在 omni_s1e 走路策略上测出 40% 假腾空 … 改用**接触力 <5N**(与 Isaac feet_contact_number 同源阈值)后 空检归零 (walk 策略 flight_frac 0.0)。**课文: 离地判定必须用接触力, 高度判 会把脚的俯仰当腾空**”

• Size each joint's action authority to its measured working range - lock a channel to zero only when its job is provably elsewhereper-joint-action-scale-lockdown

  Observed oncewalkobservation-designobservation-honestyreward-shapingcontract-freeze

  Set per-joint action scales from measured target ranges and momentum decompositions: full authority for working channels, working-range authority for balance channels, zero for channels whose contribution is measured negligible - and prefer this structural quieting over perpetual reward penalties, keeping the contract dimensions intact.

  Symptom

  "Walks crooked" - roll and yaw channels wandered; hip_yaw peak-to-peak reached 22.3 deg in v11 while contributing essentially nothing to locomotion; a uniform action scale of 0.5 gave every joint the same authority regardless of its actual job.

  Context

  The v12 design replaced the scalar action scale with per-joint scales justified by measurements: pitch-class 0.5 (the gait's entire working channel - untouched); hip_yaw 0.0 - lossless because it carries only 1.4% of yaw momentum (v6 decomposition) and straight-line targets use merely +/-0.006-0.03 ("乱动纯属浪费"); roll 0.2 - NOT zero, because lateral balance and weight transfer are roll's unique job (locking it would degenerate into foot-edge rocking, "比现在更歪"), and 0.2 covers the measured working range +/-0.06-0.19 while "0.5 的另一半全是 '歪歪扭扭'的来源". Costs were accepted consciously: turning demoted to an observation row with a fallback (yaw 0 -> 0.1 in v13). Contract preserved: the 12-dim action interface unchanged, yaw values simply neutralized. The structural lockdown also RETIRED the reward-side hip_yaw_quiet penalty - "A 的 yaw=0 结构性取代,不再付奖励塑形成本".

  Change

  action_scale_joint pitch 0.5 / roll 0.2 / yaw 0.0 wired through robot.yaml -> policy_io (verified: all-ones action gives hip_yaw target exactly 0) -> Isaac action term, guarded by the contract checker ("它就是抓这种双侧不一致的").

  Outcome

  Designed and verified on the shared side before the lineage freeze; stands as the pattern for authority sizing: structure replaces reward shaping wherever a channel should simply not act.

  Mechanism

  Action scale is a per-channel authority budget; uniform budgets give noise channels the same voice as working channels, and reward-side quieting then pays a permanent shaping tax for what a zero scale provides for free. But zeroing is only lossless when decomposition proves the channel's contribution negligible AND no unique function (balance) lives there.

  Conflicts

  Wired and verified on the config/deploy side but never trained - the 2026-08-05 reset suspended v12 before the Isaac-side run.

  Applies when

  • some joints wander without contributing to the task
  • a quieting penalty (deviation/L1) taxes every step forever
  • deciding action-space authority for a new task or robot

  “yaw=0 是无损的:实测它只贡献 1.4% 偏航动量、直行目标只 ±0.006~0.03,乱动纯属浪费。… roll 不能为 0:横向平衡/重心换脚是它的独有职责,锁死会退化成脚缘摇摆(比现在更歪)。0.2 的依据:各代实测 roll 目标只用 ±0.06~0.19,0.5 的另一半全是"歪歪扭扭"的来源。”

• Anchoring the action on the measured joint angle (target = q + beta*a), with a beta curriculum down to tau_limit/kp, bounded torque by construction, removed the re-falls and later stood the robot up on hardwarebeta-anchored-action-target

  Mechanism understoodrecoverytraining-runactuator-modelingcontract-freezecurriculum

  For large-motion skills on position-controlled actuators, bound the action relative to the measured joint angle with a per-joint authority of tau_limit/kp, curriculum the authority down from full range, keep the curriculum state out of the observation and pin acceptance at the deployed authority - and make the deployment code refuse to run the anchored contract without a measured q.

  Symptom

  The V0 full-range absolute action produced violent targets; the V1 command-anchored rate limit made standing oscillate. Both failure modes came from how the action becomes a target.

  Context

  V2.0 (user approved, from scratch): BetaAnchorJointPositionAction, target = q_measured + beta_j(m)*a, memoryless per step. beta_j(m) = floor + m*(beta0 - floor), beta0 = the contract half-range (m = 1 reproduces V0 authority), floor = min(tau_limit/kp, beta0): hip_pitch 1.309 -> 0.40, knee 1.047 -> 0.40, hip_yaw -> 0.917, the other joints unchanged - the tightening lands exactly on the joints the V0 torque account convicted. m drops 0.1 per step when a standing-share EMA exceeds 0.35. beta is NOT in the observation, so the 45-dim contract is untouched; acceptance is pinned at m = 0 because the Python curriculum state is not saved in the checkpoint. The deployment chain got a new profile (recovery_v2: action_anchor current_q, explicit per-joint beta written into the contract, independent of the gain profile), and policy_io raises if q is missing rather than silently falling back to the absolute contract; the old profile's check reproduced its pre-change deviation bit for bit.

  Change

  New action term and beta curriculum; later the RS06 floor was lowered 0.40 -> 0.30 -> 0.25 (kp*beta 7.5 N*m) and the stamped deployment profile was synced to 0.25.

  Outcome

  First acceptance at m = 0 (v2_0b): re-falls 0% in every category, the torque gate passed for the first time on the line (worst 69.9%), knee jitter 0.004; supine 98.8 / side 88.8% with prone and mid still failing (fixed by the conditional pull curriculum). MuJoCo showed demand at or under the limits (hip_pitch 11.7/12 against V0's 26.8). Lowering beta cut impact (hip_pitch demand 9.7 -> 8.5 N*m) but barely slowed the get-up - it had become coordination-limited. Enabling the policy moves the target only +/-beta around the current pose, so there is no homing fling; the 08-11 real get-up and the later v3_1p1c both run on this contract.

  Mechanism

  kp*beta caps the proportional torque in a single step with no build-up delay and no memory, giving both a hard impact bound and full balance bandwidth.

  Applies when

  • a skill needs full joint range but hardware torque limits are low
  • absolute position targets cause impacts or saturation
  • changing the action semantics of a contract that deployed policies share

  “**动作项** `BetaAnchorJointPositionAction`:`target = q_实测 + β_j(m)·a`, 逐步无记忆 … **Play/验收钉 m=0(= floor = 部署档)**:python 课程状态不进 checkpoint, Play cfg 显式 `beta_m_start=0` … 判读:**结构赌注兑现** —— 站姿零再摔 + 力矩账首过(kp·β 封顶按构造)”

• A soft joint-limit penalty charged the standing pose itself - the geometric-zero knee sat on its hard limit, so stand_v1 bent its knees to dodge 0.419 per step and leaned 4.1 deg forward; excluding the knee gave 0.24 degsoft-limit-penalty-charges-nominal-pose

  Mechanism understoodstandreward-shapingreward-shapingplant-calibration

  Before training, evaluate every penalty at the nominal pose; if a joint's soft limit sits inside the pose the task requires (a straight knee on its hard stop), exclude that joint from the soft-limit penalty and let the action clip enforce the hard limit.

  Symptom

  stand_v1 (retrained after the default pose moved to the CAD geometric zero and mirror augmentation was added) fixed left/right asymmetry (6.8 -> 0.0 deg) but settled at a 4.1 deg forward lean, where pure PD at the same default settled at 0.1 deg - the policy was actively pushing itself forward, which is exactly the real robot's failure direction.

  Context

  soft_joint_pos_limit_factor = 0.9 shrank the knee's soft limit to -/+0.1047 rad, while the geometric-zero default has the knee at q = 0, exactly on the hard limit. Standing in the nominal pose therefore paid 0.2094 x 2.0 = 0.419 per step in dof_pos_limits (alive earned only 0.5). The policy's way out was to bend the knees to -/+0.1013 rad, and the cost was the forward lean.

  Change

  stand_v1b: the knees excluded from dof_pos_limits (a straight knee IS the standing pose; the hard limit is still enforced by the action clip). No other change.

  Outcome

  stand_v1b: max tilt 0.3 deg, steady tilt 0.24 deg, asymmetry 0.1 deg, height 0.384 m - exactly nominal - with knees at -0.0007 / +0.0005 rad. It became the standing release used on the real robot, and later the standing side of the recovery switch. The same exclusion was carried into the recovery contract (knee at the clip in the standing pose) and the one-leg reward table.

  Mechanism

  A limit penalty whose soft boundary lies inside the nominal pose turns the nominal into a taxed state, and the policy buys its way out with whatever posture change is cheapest - here a knee bend paid for with lean.

  Applies when

  • a standing or default pose has a joint at or near its hard limit
  • a policy settles in a small steady tilt that pure PD does not show
  • soft-limit factors shrink limits uniformly across joints

  “`soft_joint_pos_limit_factor=0.9` 把膝软限位内缩到 ∓0.1047,而几何零位 default **膝盖 q=0 正好压在硬限位上** ⇒ 站在标称姿态每步白扣 `0.2094 × 2.0 = 0.419` (alive 才 +0.5)。策略只能屈膝到 ∓0.1013 躲罚,代价是躯干前倾 —— 恰好是真机的 失效方向。 … 修掉"软限位罚标称姿态"后重训(`dof_pos_limits` 排除膝盖)。**前倾问题彻底消失** … 不再屈膝躲惩罚,高度正好落回标称 0.3840。”

• Set torque limits per joint from measured gait peaks - a uniform percentage is the wrong shape, and training must use the deployed numberstorque-limit-shape-by-measured-peaks

  Mechanism understoodwalkactuator-modelingactuator-modelinghardwareplant-calibration

  Measure per-joint torque peaks in the actual gait and set each limit as measured-peak x margin capped at rating; then propagate the same numbers into training and add an automated deploy-time consistency check - never derate by a uniform percentage, never let training assume torque deployment will not grant.

  Symptom

  A uniform 50% torque derating (18/8.5/7) had piled safety margin on the joints that never use it while cutting the busiest joint below half its measured demand.

  Context

  Per-joint gait peaks were measured (walk_v5 at cmd 0.3/0.6): RS06 (hip_pitch/knee) uses 5.5-5.9 N*m = 15-16% of its 36 N*m rating - cutting it to 12 is a free safety win; RS02's ankle_pitch runs at 16.2 N*m = 95% of its 17 N*m rating - "它是速度的硬件瓶颈", no room to cut; RS00 measured 36-44%, capped at 11. The resulting shape 12/17/11 replaced the uniform percentage. Sweeps across several limit sets (rated / 50% / 14-17-11 / 12-17-11) produced identical speed, lift, and landing force - within this range the limits do not shape the gait; what matters is consistency: "关键是训练和硬件必须是同一个数", because the exporter fills effort_limit from tau_limit, and a policy trained at rated 36/17/14 "会假设有三倍力矩可用" while deployed at 12/17/11 (exactly the v5 cross-generation inconsistency later suspected in its wild kicking).

  Change

  robot.yaml tau_limit set to the measured-shape 12/17/11, firmware written to match, and train/isaac_values.py regenerated so training sees the same limits; the deploy tool self-checks limits against robot.yaml on every run.

  Outcome

  Free safety margin captured where demand is low, the real bottleneck joint left at rating, and the train/deploy torque worlds unified with an automated consistency check.

  Mechanism

  Torque demand is grossly unequal across joints in a gait (15% vs 95% of rating here); a uniform percentage misallocates the safety budget by construction. And since the trainer treats effort_limit as a plant truth, any train/deploy mismatch is an invisible plant gap of exactly the mismatch ratio.

  Applies when

  • choosing safety torque limits for a legged platform
  • training-vs-deployment actuator limit audit
  • one joint runs near rating while others idle

  “曾用统一 50%(18/8.5/7)是错的形状: 把余量堆在用不到的 RS06 上, 却把 ankle_pitch 砍到需求的 52%。… RS02 在 0.6 m/s 已用到额定 95%, 它是速度的硬件瓶颈 … 实测多组限幅 … 完全一致 —— 限幅在这个范围对步态零影响, 关键是训练和硬件必须是同一个数。… 若训练仍按额定 36/17/14, 学出的策略会假设有三倍力矩可用。”

• Before training a one-leg stand, the accounts and a probe showed the default gains could not hold it at all - kp 20 needs 0.39 rad of error to carry the static roll moment, more than the whole adduction range - so per-joint gains came first, and thermal limits set the session lengthsingle-support-gain-authority-probe

  Mechanism understoodonelegplant-calibrationactuator-modelingplant-calibrationhardware

  Before training a posture that loads one joint statically, compute the steady tracking error load/kp and the series stiffness against m*g*h, and prove with a simple hand-written controller that the posture can be held under the deployment gains - change the gains first if it cannot; then size session length from the thermal account.

  Symptom

  The one-leg line (standing on one foot, the other folded back, no hopping) had to decide whether the existing gain profile could hold single support before any reward was designed.

  Context

  Hardware accounts (9.792 kg, COM 0.234 m high, 170 x 80 mm feet, legs 80% of the mass): moving the COM over one foot needs 107 mm of shift and the 20 deg hip-roll adduction range gives 131 mm - geometrically enough. The static frontal moment is 7.8-9 N*m, within RS02's 17 N*m - torque is enough. But at kp 20 carrying 7.8 N*m needs 0.39 rad of tracking error, more than the entire adduction range, and the real robot had already shown it: commanded +0.17, actual -0.04 (0.21 rad droop) under load, 0.0008 rad hanging - load, not the motor. A probe (probe_oneleg.py) then showed open-loop PD cannot hold single support on physics grounds, so the criterion became "an equilibrium exists and a hand-written 4-gain COM feedback can hold it": single-support roll stiffness is hip and ankle in series and must exceed m*g*h_com = 22.5 N*m/rad; ankle kp 12 in series with hip kp 80 gives only 10.4 (open loop 16/16 fell), ankle 60 with hip 80 gives 34.3 (52% margin).

  Change

  A per-joint gain profile (rl_oneleg: hip_roll kp 80, ankle_roll kp 60, the rest as rl_default) - which needed per-joint gain support in robot.yaml, the bridge, deploy and the trainer's actuator groups - decided before training. Thermal account: single support makes hip_roll the dominant heat load (about 7.8 N*m against a 7 N*m continuous rating), so acceptance and demos run in segments of at most 60 s with a temperature check.

  Outcome

  Under rl_oneleg the hand-written feedback held six cells cleanly for 6 s (hip_roll steady torque 2.1-3.4 N*m, half the thermal budget); under rl_default the same feedback on the same cells fell 0/4. The trained V0 policy then passed its 40-cell acceptance.

  Mechanism

  With PD position control, the steady error needed to carry a static load is load/kp; when that error exceeds the joint's range the posture is unreachable whatever the policy does, and series compliance between joints lowers the effective stiffness below the gravity stiffness that single support demands.

  Applies when

  • single-support, crouched or one-arm-load postures on PD actuators
  • a joint "droops" under load on hardware but tracks well when hanging
  • deciding whether a new skill needs its own gain profile

  “但 kp=20 时撑住 7.8 N·m 需要 **0.39 rad 跟踪误差 > 整个内收行程**。真机已实测: 命令 +0.17 实际 −0.04（droop 0.21 rad），悬挂时 0.0008 rad——是负载不是电机。 … 单支撑滚转是 hip/ankle **串联**刚度，必须 > m·g·h_com = 22.5 N·m/rad；ankle kp12 串 hip80 只有 10.4（开环 16/16 全摔），60 串 80 = 34.3（裕 52%） … **rl_default 同反馈同格 0/4 全摔**（增益档必要性对照）”

• Ideal PD is not enough - add a delay buffer and fit armature/friction/delay per jointactuator-delay-buffer-fitting

  Observed oncewalkactuator-modelingactuator-modelingplant-calibration

  Never ship ideal PD to hardware: add a measured delay (in control steps) and per-joint armature/friction fitted from step and sine responses, and treat remaining actuator mismatch as your standing largest sim2real residual.

  Symptom

  Standard ideal PD actuator model transfers poorly; sim assumes targets take effect instantly and joints reach arbitrary acceleration.

  Context

  A developer with a successful on-hardware Isaac Lab biped modified the actuator model in two ways and calibrated it against the real robot: step-response plus sine-sweep tests (positive step, negative step, sine tracking), overlaying sim curves on measured curves and hand-tuning.

  Change

  (1) Delay buffer: action targets take effect after a uniform 6 time-step delay on all joints; (2) acceleration limiting so the actuator cannot reach arbitrary acceleration; (3) per-joint fit of armature / friction / delay - different joints genuinely needed different values.

  Outcome

  Hip joints fit worst, knee best; the developer rated the result "not perfect, the best I could do" and still listed actuator-model improvement as next work - i.e. even the fitted model remained the dominant residual.

  Mechanism

  Real actuation is a lagged, bandwidth-limited system; a delay buffer and acceleration cap are the two cheapest structures that reproduce its phase and magnitude response. Per-joint differences come from differing load, wiring, and friction states, so a single global constant underfits.

  Applies when

  • actuator model in sim is ideal PD with no delay
  • step-response of real joint visibly lags or overshoots the sim's
  • budgeting which sim2real gap to attack first

  “标准 ideal PD actuator 不够用，他改了两处：延迟缓冲：目标不是立即生效，全部关节统一 6 个 time step 延迟 / 加速度曲线：执行器不能瞬间达到任意加速度 … 用 armature / friction / delay 三个参数逐关节拟合，标定方法是阶跃响应 + 正弦扫描 … 髋部关节偏差最大，膝关节最好。”

• Prone get-up sat at 0/159 until two gated hinge terms moved the seated feet - first sideways (561 -> 360 mm), then fore-aft (-168 -> +56 mm) - and success went to 158/159 with nothing else changedprone-dead-end-is-foot-placement

  Mechanism understoodrecoveryreward-shapingreward-shapingattributioncurriculum

  When a stuck state and a successful state differ geometrically, penalize the discriminating quantity with a gated hinge that is exactly zero in the state the policy actually reaches (measure it - not the nominal), then re-probe: flattening one axis can move the discriminant to another.

  Symptom

  Prone falls always righted and then sat with the feet splayed wide or tucked behind the hips, from where the policy never stood (0% for four generations).

  Context

  Four lines of evidence pointed at foot position: the configuration probe (ankles 215 mm apart stood 52.3%, 561 mm apart 0.0%); FK showing the action contract's nominal (a = 0) is itself a 465 mm straddle, so the action_rate and still terms were pulling toward the splits; biomechanics (feet tucked under the body cut peak hip-extension torque 148.8 -> 32.7 N*m, -78%); and HoST's foot-displacement term, which this reward table lacked. The earlier "not a reward hole" reading was corrected to "a gradient hole, not a level hole": at the dead point the heaviest term (upright) was saturated with zero gradient, still paid for not moving, and the one live gradient (base_height) pointed at the thigh-horizontal torque barrier. A prone ROM scan had already ruled out pushing up from prone.

  Change

  R0.4: feet_spread_excess = clamp(ankle distance - 0.215, 0, inf) x upright gate, weight -2.0, plus a height-decay factor added after measuring that the policy's real standing stance was 406 mm, not the 215 mm nominal (the plain version would have taxed every successful stand 0.38/s). R0.5: the same shape on the fore-aft axis, feet_fore_seated = |fore-aft offset - 0.05| x upright gate x height decay, target +50 mm (the measured natural offset of standing postures). One variable per rung.

  Outcome

  R0.4: seated ankle distance 561 -> 360 mm, supine/side exactly unchanged, prone 0 -> 1.9%, mid 45.9 -> 62.2%; a probe then showed the discriminant had moved to the fore-aft axis (standing starts +42 to +51 mm, the prone seat -168 mm). R0.5: supine 99.4, prone 99.4, side 100, mid 100%, re-falls 0%; both geometry terms collapsed to ~0 near iteration 13,100 as base_height rose, and the prone fore-aft offset went -168 -> +56 mm - the term's own target, closing the causal chain. The cost, unmeasured at the time: action jitter rose 33% (sum |da|^2 6.82 -> 9.06).

  Mechanism

  An upright-gated hinge is inert while the robot rolls and exactly zero in the achieved stance, so it adds gradient only inside the stuck basin; a seated robot with its feet behind or outside its COM must make a kinematically unfavourable transition to stand, and moving the feet under the body removes it.

  Applies when

  • a get-up or transition skill fails from one start category only
  • successful and failed episodes differ in a measurable geometric quantity
  • a shaping term might tax the posture successful episodes already use

  “`recovery_r0_5`,唯一变量 = 追加 `feet_fore_seated`(与 R0.4 同形状,只换测量轴)。 … 对照 R0.4 的 prone(3.1%,360 mm,**−168 mm**):前后偏移从 −168 走到 +56, 正是这一项的目标量,**判别量被消掉后成功率随之到顶** —— 因果链完整。”

• Every power cycle starts with the same read-only pre-flight - read the buses, check the torque limits against 12/17/11, verify the IMU axes, check the ports after any new USB device - and any reassembly re-measures the joint zerospower-cycle-preflight

  Observed onceinfrareal-deployreal-acceptancehardwareprocess

  Start every powered session with a fixed, read-only pre-flight - bus responses, torque limits equal to the simulated ones, IMU axes, device identities - and re-measure joint zeros after any mechanical reassembly before running a policy.

  Symptom

  Hardware state drifts between sessions in ways no policy can see: a motor that stops answering after a power cycle, a torque limit that differs from the one simulated, an IMU axis flipped, two USB devices swapping identities, a joint zero moved by reassembly.

  Context

  The runbook's session order before any policy runs: read every motor on both CAN buses without enabling them (the first command after every power cycle); set_torque --check, all twelve motors must read 12/17/11 N*m, and any difference is written back; imu_reader --verify-axes, where the operator tilts the robot forward and to the right and every check must pass before continuing; check_ports after plugging in any new USB device (the IMU and a CAN adapter once collided on USB identity). After re-mounting motors: read the buses, then re-measure the calibration offsets (three repeats, written back) - "skipping it means running everything on the wrong zero". Hanging checklists repeat the torque-limit check (the deploy script also self-checks at start).

  Change

  A fixed, read-only pre-flight run in the same order every session.

  Outcome

  The runbook records one earlier hardware check in the same spirit: all 12 motors' implied kp fell within 18.4-22.0 for a commanded 20, inside the kp randomization range used in training.

  Mechanism

  A policy transfers only if the plant matches the one it was evaluated on; the pre-flight turns silent hardware drift into a failed check before the robot moves.

  Applies when

  • the first command after powering a robot on
  • after swapping adapters, cables or motors
  • a policy that worked last session suddenly behaves differently

  “python tools/set_torque.py --check # 12 颗应全对 12/17/11, 有 diff 就 --write … 插任何新 USB 设备后都先跑一次 check_ports.py(IMU 和 CANable 的 USB 身份撞过车) … python tools/calib_stance.py --repeat 3 --write # 重标 offset —— 8/9/10 重新装, 机械零位变了”

• Isaac splits Coulomb friction into static and dynamic columns - wiring only static means zero loss during motion, silently discarding the identified valuesim-api-friction-columns

  Mechanism understoodinfraplant-calibrationplant-calibrationactuator-modelingdomain-randomization

  When installing identified actuator parameters, map each measured quantity to the simulator's exact API column for the operative regime (dynamic for moving loss, viscous for damping), verify per joint after landing, and audit how randomization intervals fall on each column's nominal.

  Symptom

  The hardware-identified Coulomb friction (tau_c) was about to be installed into the trainer through the friction= field alone - which in Isaac 5 populates only STATIC friction, so during motion the joints would lose no torque at all: "只给 static 则运动中不损耗, 辨识的 τ_c 走路时等于没接" (the identified tau_c would effectively not be connected while walking).

  Context

  The v12 integration wired all three columns deliberately: armature= and friction= from the 2026-08-04 hardware identification, PLUS dynamic_friction= (Isaac 5 splits Coulomb into static/dynamic; the moving-loss column is dynamic) and viscous_friction= (= the measured joint damping 0.02, aligned to MJCF's damping). Each value was re-checked per joint after landing. A DR interaction was audited and booked rather than hidden: randomize_joint_parameters jitters ALL friction columns with ONE interval - the [-0.05, +0.10] band was calibrated against the Coulomb nominal, and landing on the viscous nominal 0.02 it becomes [0, 0.12], "偏宽但保守" (wide but conservative), accepted with the note that pre-viscous behavior was already [0, 0.10] on a base of 0.

  Change

  Measured actuator parameters installed across all applicable API columns (armature, static, dynamic, viscous), with the DR side effect on shared randomization intervals audited and recorded.

  Outcome

  The first generation where the identified plant actually acts during motion in the trainer; the silent-column failure mode documented before it cost a training run.

  Mechanism

  Physics engines decompose "friction" differently (single coefficient vs static/dynamic/viscous columns); a measured parameter is only installed when it reaches the column the solver reads in the regime that matters (motion, not stiction). Randomizers that share one interval across columns rescale the band by each column's nominal - a hidden unit change.

  Applies when

  • installing identified friction/armature into any trainer
  • porting plant parameters between simulators or engine versions
  • joint losses in sim do not match bench measurements during motion

  “并额外传 dynamic_friction=(Isaac 5 把库仑拆 static/dynamic 两列,只给 static 则运动中不损耗,辨识的 τ_c 走路时等于没接)与 viscous_friction=(= joint_damping 0.02,对齐 MJCF damping)。… randomize_joint_parameters 用同一个 friction 区间抖三列, [-0.05,+0.10] 是按库仑标称标的,落到粘滞标称 0.02 上成了 [0,0.12]”

• Model CAN polling skew - joint observations are 6-9 ms stale by read ordercan-timing-skew-modeling

  Observed oncewalkactuator-modelingactuator-modelingsim2simhardware

  If joints are read sequentially over a shared bus, reproduce the per-group observation staleness in sim (or randomize it over the measured range) - synchronous observations are a privileged fiction.

  Symptom

  Policies trained with synchronous joint observations degrade on hardware where motors are polled sequentially over CAN - hip data is already 6-9 ms old by the time ankle data arrives.

  Context

  Menlo's core sim2real finding on a leg platform of almost identical mass to Lucen's. CAN is a sequential bus: one poll cycle reads motors in a fixed order, so the observation vector mixes timestamps. Lucen runs 6:6 motors on a dual CAN split, so the problem transfers one-to-one.

  Change

  Explicitly model CAN timing skew in sim: give the joint groups different observation delays matching physical read order. Menlo went further - running real firmware in the loop with a motor simulator between MuJoCo and firmware injecting 0.4-2 ms uniformly distributed delay.

  Outcome

  Reported by the reference team as their core sim2real enabler on a same-scale platform; recorded in Lucen's experience log as directly applicable ("这个问题一模一样").

  Mechanism

  A policy exploits any cross-joint temporal coherence present in training observations; when hardware breaks that coherence per bus position, the learned feedback acts on inconsistent state estimates, injecting phase error exactly at the control bandwidth.

  Conflicts

  Second-hand episode: outcome numbers are the reference team's report, not a Lucen-run experiment; Lucen adopted the requirement but the corpus has no Lucen A/B of skew-on vs skew-off.

  Applies when

  • robot polls actuators sequentially over CAN/RS485 or similar shared bus
  • sim2real degradation appears as jitter or oscillation not seen in sim
  • designing the observation/delay model before a training run

  “电机走 CAN 是顺序轮询的，髋部电机的数据到踝部电机上报时已经陈旧了 6-9 ms，他们直接在仿真里显式建模了 CAN 时序偏斜，按读取顺序给三组关节不同的观测延迟。… 注入 0.4–2 ms 的均匀分布延迟。你们是 6:6 双 CAN 分总线，这个问题一模一样”

• A joint-velocity penalty meant to slow the get-up cut joint speed 16% and left the get-up time unchanged - the knob never moved the variable, so the idea it was meant to test stayed untesteddof-vel-penalty-is-not-a-pacing-knob

  Mechanism understoodrecoveryreward-shapingreward-shapingattribution

  Before reading a result as a test of an idea, check that the knob actually moved the independent variable; velocity regularizers smooth a schedule they do not set, and a schedule driven by per-step task income moves only when that income's time structure does.

  Symptom

  The get-up took 0.6-0.9 s in Isaac with large torque demand; the user proposed getting up more slowly so less torque would be needed.

  Context

  The idea had support in the accounts: the acceptance bound is an upper bound of 5 s (5-8x margin), the quasi-static squat path peaks at 25% of the limits, and rolling over needs no momentum. R3.2 raised dof_vel from -1e-3 to -5e-3 as the single variable.

  Change

  dof_vel -1e-3 -> -5e-3 (child-run from R3.1).

  Outcome

  Get-up medians moved +0.02-0.04 s (noise); raw joint velocity -16%; torque demand median got worse (hip_pitch 46-48% -> 63-67%) as the new term competed with torque_headroom on the same joints; MuJoCo 98 -> 96%. Verdict FAIL on the knob, not on the idea, and the rung was not adopted. When pace was later attacked through the income's time structure (V2.5/V2.5b), the MuJoCo get-up moved into the 3.5-4.5 s design band.

  Mechanism

  The pace was set by base_height_progress paying for every step spent high (stand earlier, earn more); a velocity regularizer only smooths motion along the same schedule and does not change when the robot stands up.

  Applies when

  • trying to make a skill slower or gentler with smoothness penalties
  • an experiment's primary metric did not move and a verdict is being written
  • two penalties act on the same joints

  “**关键判读:`dof_vel` 罚只把关节速度压了 16%,而起身用时一点没变。** 也就是说**这一级根本没有把"慢下来"这个自变量推动起来** —— 所以它**不构成对 用户假说的检验** … 起身节奏由 `base_height_progress` 的逐步计酬决定(早站起来就多 拿),速度正则只在同一条时间轨迹上把动作抹匀,不改变何时站起来。”

• Three same-shaped judging errors - task metrics (survival, tracking, displacement) cannot stand in for posture metricstask-metrics-vs-posture-metrics

  Replicatedomnireal-acceptancereal-acceptancegate-batteryattribution

  Keep validated posture-class rows (tilt, per-joint L/R asymmetry, temperature) in every acceptance battery alongside task rows; when operator feel contradicts the gates, suspect the metric class before the operator - and never build a new skill on what is actually an asymmetry defect.

  Symptom

  The C2 product judged "full pass" on task metrics (A800: turn-gap 7 pp, vx+0.30 19/20) felt WORSE in the operator's hands than the half-pass 700: A800 tilted up to 12.90 deg (700: 6.64), drifted left while standing, showed larger per-joint asymmetries, and ran its hip_rolls 5 degC hotter.

  Context

  The re-judgment catalogued three same-type metric errors in one campaign: (1) stand judged by SURVIVAL - missed 0.5-1.4 m wandering; (2) stand ranked by DISPLACEMENT - ordering was opposite to real feel (tilt ordering matched); (3) chirality judged by wz-tracking GAP - measured turning symmetry while the robot's actual disease was postural left/right asymmetry, "两个不同的东西,且结论相反". Common pattern named: "我一直用「任务指标」当判据,而真机手感对应的是「姿态 指标」… 任务类指标不能替代它". The fix was already in the data: the per-joint left/right asymmetry table (printed identically by sim2sim and deploy) agreed with hardware in direction on every row - "判据可用、有预测力,我只是没把它写进 PASS 条件". Shipping decision followed the posture read: product reverted to 700 ("又一次「买到 精度、卖掉别的」"), and the C4 root moved to 700 as well, with the sharpest line of the episode: A800's left-drift "like sidewalking" is probably its frontal-plane asymmetry defect, not a capability - "在缺陷上建能力是危险的".

  Change

  Two posture quantities with demonstrated real-robot predictive power promoted into every PASS battery: tilt-max median and per-joint left/right asymmetry (both sim-computable, deploy-homologous); motor-temperature readout added to session close-out.

  Outcome

  Deployment flipped to the posture-better checkpoint; the hip_roll temperature table (43-48 degC vs 25-28) confirmed the earlier 90%-of-heat account; the run-line acceptance battery inherited the posture rows from birth ("任务类替代不了姿态类").

  Mechanism

  Task metrics measure goal attainment under the evaluator's episode definition; posture metrics measure the body state trajectory that operators, motors, and downstream skills actually experience. The two can rank candidates oppositely because task success tolerates postural pathology - so a battery without posture rows is blind to exactly what hardware feel reports first.

  Applies when

  • hardware feel disagrees with a green acceptance table
  • choosing between checkpoints that split task vs posture metrics
  • selecting the root for a skill that resembles an existing defect

  “共同模式:我一直用「任务指标」(存活 / 跟踪率 / 位移)当判据,而真机手感对应的是「姿态指标」(倾角、逐关节左右不对称)。→ 验收判据里必须有姿态类指标,任务类指标不能替代它。… A800 的「左飘像 side walk」很可能 … 是它更大的额平面不对称的表现 —— 在缺陷上建能力是危险的。”

• A 2-degree joint-zero calibration fix moved the whole runnable envelope - re-test old "cannot run" verdicts after recalibrationzero-offset-calibration-shifts-envelope

  Observed onceomnireal-deployreal-acceptancehardwareplant-calibrationattribution

  Date every hardware verdict with the calibration state; after any zero/mount recalibration, re-test previously condemned policy-power combinations and previously "unexplainable" posture offsets before attributing either to training or model.

  Symptom

  s1d was on record as "only runs at power 0.7" (kicked wildly at 0.8); after a calibration pass, the same policy ran 12 s at 0.8 with no kicking at all.

  Context

  The calibration had fixed a 2.08 deg zero offset on r_hip_roll - exactly the constant error source on the dominant joint of the kicking oscillation loop ("恰是乱踢振荡环主导关节的常值误差源"). The three-generation post-calibration hardware sweep also closed a second case: the robot's mysterious "backward lean" disappeared after calibration, and the sim-real posture difference collapsed from opposite-sign 5+ deg to same-sign ~2 deg ("后仰案实质了结") - the lean had been a sensing/zero artifact, not a mass-model error. Booked consequence: if the s1d recovery re-verifies, "真机可跑档整体 上移" - every policy's runnable power envelope shifts up, and downstream lineages' hardware expectations get revised.

  Change

  Joint-zero and mount calibration promoted from setup chore to a variable that dates hardware verdicts: verdicts about which power/scale levels a policy can run are conditioned on the calibration state they were measured under.

  Outcome

  One policy rehabilitated at a higher power level; one standing sim-real posture discrepancy closed without touching model or training; a pending re-verification booked rather than asserted.

  Mechanism

  A constant joint-zero error acts as a persistent disturbance injected at the feedback loop's most-loaded joint; near an oscillation threshold, removing a 2-degree bias is the difference between a stable and an unstable loop. Since the error is additive and machine-side, it shifts every policy's stability envelope simultaneously - which is why verdicts must carry their calibration date.

  Conflicts

  The s1d rehabilitation awaited one confirming re-run at the time of writing ("待复核一跑坐实") - the offset-as-cause reading is the head suspect, not a closed verdict.

  Applies when

  • a policy oscillates at a power level others tolerate
  • sim and real disagree on a constant posture offset
  • deciding whether to re-test old hardware verdicts after maintenance/calibration

  “发现①:s1d@0.8 能跑了(旧账「只有 0.7 能跑」)——12s 无乱踢。头号嫌疑 = 标定修正:r_hip_roll offset 修 2.08°,恰是乱踢振荡环主导关节的常值误差源。… 发现②:「后仰」标定后消失 … sim-real 姿态差从反号 5°+ 收敛到同号 2°,后仰案实质了结。”

• The walking lines' safety setting, power-scale 0.8, broke the recovery policy's full-range contract - it cut the ends of the joint travel (4/50 could not get up) and left the torque spikes untouched; a kp x 0.9 gain profile inside the trained kp band did the jobpower-derating-cuts-full-range-contract

  Observed oncerecoveryreal-deployreal-acceptanceactuator-modelingcontract-freeze

  A deployment derating knob means something only relative to the action contract: before reusing a line's "safe setting" on a new skill, check what it does to that skill's reachable range and to the term that makes the spikes, prefer a gain change inside the band the policy was randomized over, verify it in simulation, and re-decide when the contract changes.

  Symptom

  After the violent first real get-up (2026-08-09), the recovery policy needed a gentler setting for its next hardware test, and the walking and omni lines' standard derating - deploying at power-scale 0.8 - was the obvious candidate.

  Context

  The V0 recovery contract maps actions to absolute targets over the full joint range: a = +/-1 lands exactly on the URDF limits, and standing puts the knee at the clip. Candidates were compared on R3.1 in MuJoCo (5 categories x 10 seeds) on 2026-08-10 before any hardware time was spent.

  Change

  A new gain profile, rl_kp090 (kp x 0.9, kd unchanged), recorded in robot.yaml as the recovery hardware-test setting, with power-scale 0.8 explicitly banned for recovery.

  Outcome

  kp x 0.9: 48/50 got up; median torque demand on hip_pitch/knee fell from 120-125% to 100-104% of the deployment limit; leg-leg contact frames 2,152 -> 1,095; the change sits inside the +/-10% kp randomization the policy trained with. power-scale 0.8: 4/50 could not get up, because under the full-range contract it removes the ends of the travel (the deep squat's tucked legs, the straight standing knee), and the torque spikes (kp x error) did not fall at all. When the line moved to the beta-anchored contract, rl_kp090 was declared a V0-era choice that does not fit (beta is calibrated at kp 30) and deployment returned to rl_default; the deploy switch applies power scaling to the walking side only.

  Mechanism

  A power scale multiplies the action, which under an absolute full-range mapping shrinks the reachable workspace instead of softening the actuator; the spikes come from the proportional term on large errors, which only a gain change reduces - and a gain change inside the trained randomization band stays in distribution.

  Conflicts

  The undated operator runbook still carries an R3.1 "B comparison" command at power-scale 0.8 beside the rl_default baseline; the sources do not say whether it was written before the ban or was ever run.

  Applies when

  • reusing a power, torque or action scale from one skill on another
  • a policy whose actions map to absolute targets over the full joint range
  • choosing a gentler setting for a first or second hardware trial

  “kp×0.9 / kd 不动 —— recovery_r3_1 成功 48/50, τ 需求中位 hip_pitch/knee 120~125% -> 100~104% 部署限, 腿-腿接触 2152 -> 1095 帧; ±10% 在训练 kp DR 带内. ⚠️ power-scale 0.8 对 recovery **禁用**: 全 ROM 契约下 0.8 砍的是行程 端点 (深蹲收腿/站直够不到), 实测 4/50 起不来, 且尖峰 (kp·err) 一点不降 —— 它是 walk/omni 的安全档, 不是 recovery 的.”

• Prove a new penalty actually fires - two ways a clearance term silently did nothinginert-reward-term-audit

  Mechanism understoodwalkreward-shapingreward-shapingplant-calibration

  Before training with a new reward term, log its realized per-step value under the current policy and confirm it is nonzero where intended - check coordinate zero-points against FK and check who occupies the term's gate; and never weaken the term that creates the states your new term needs.

  Symptom

  A newly designed swing-height clearance penalty could have trained as a no-op twice over, and the companion advice to lower feet_air_time actively backfired when tried.

  Context

  Instance 1 (zero-point offset): the proposed code used body_pos_w of the foot link, but that is the ankle_roll_link frame origin, which sits 0.0585 m above the ground even with the foot flat on it - so (0.03 - 0.0585) is always negative and the penalty is永远 0; the 0.0585 offset must be subtracted (verified identical in MuJoCo FK and Isaac). Instance 2 (gate occupancy): the clearance penalty fires only in swing phase; a dragging policy keeps both feet in contact, so the penalty is constantly 0 for exactly the policy it was meant to fix - and worse, any slight lift immediately incurs it, a reverse threshold. Lowering feet_air_time to 0.5 on that advice measurably collapsed air time to 0.0002 (below v3). Corrected understanding: "clearance 是把已有的摆动相抬高, 造出摆动相仍要靠 air_time" - air_time creates the swing phase, clearance raises it.

  Change

  Fixed the height zero-point; kept feet_air_time as the swing-phase creator with clearance layered on top; both errors documented as corrections to the team's own earlier advice.

  Outcome

  With both fixed, swing height rose from 22-23 mm (v2) to 29 mm (v5) to 34 mm (v6); the inert-term failure class entered the standing checklist.

  Mechanism

  A penalty's gradient exists only where its gate is occupied and its argument crosses its threshold; frame offsets shift the threshold out of reach, and phase gates can have zero occupancy under exactly the policy being treated. Terms interact as an ecology - one term must create the states in which another can act.

  Applies when

  • adding any gated or thresholded penalty (clearance, impact, slip)
  • a new term produces no behavioral change at any weight
  • body-frame positions are used in reward code

  “body_pos_w 是 ankle_roll_link 坐标系原点,平放触地时仍高出地面 0.0585 m。… (0.03 − 0.0585) 恒为负 → 惩罚永远是 0 … clearance 惩罚只在摆动相生效,拖地时两脚始终触地 → 惩罚恒 0;而一旦轻微抬脚就立刻扣分,对正在拖地的策略是反向门槛。… 正确认识:clearance 是"把已有的摆动相抬高",造出摆动相仍要靠 air_time。”

• Armature must be N^2 x rotor inertia, never 0 - measure it no-loadarmature-n2-rotor-inertia

  Mechanism understoodwalkplant-calibrationplant-calibrationactuator-modeling

  Every geared actuator carries N^2 * I_rotor of reflected inertia at the joint; set armature from a no-load measurement, never leave it 0 and never guess it.

  Symptom

  Sim joints accelerate more easily than real joints; old MJCF had armature = 0 (rotor reflected inertia entirely unmodeled), a systematic sim2real gap on every joint.

  Context

  Original hand-written MJCF plant used armature 0. The team derived and then measured the correct value: torque needed at the rotor is I_rotor * N * alpha; after the N:1 gearbox the output shaft "feels" an extra N^2 * I_rotor of inertia. With a 9:1 reduction that is an 81x amplification of the rotor inertia, far too large to ignore.

  Change

  Set per-motor armature from no-load (motor out of the robot) measurement instead of 0: RS06 = 0.0070 kg*m^2, RS02 = 0.0032 kg*m^2, RS00 = 0.0015 kg*m^2. Landed together with measured friction as the first fully-measured plant parameter set.

  Outcome

  Plant parameters "第一次全部来自实测" (first time all from measurement); became the frozen plant baseline for all subsequent training generations.

  Mechanism

  Reflected inertia scales with the square of the gear ratio: the rotor spins N times faster than the joint, so its kinetic energy (and the torque needed to accelerate it) appears N^2 larger at the output. Omitting it makes simulated joints unrealistically fast/light, so policies learn action rates the real actuator cannot deliver.

  Applies when

  • building or auditing a simulation plant model for a geared/QDD actuator
  • sim policy moves joints faster or snappier than the real robot can
  • MJCF/URDF review shows armature or rotor inertia set to 0 or a default

  “armature 转子反射惯量有问题 在sim里面一定要处理 不能是0，空机测试。转子处需要的力矩 = I_rotor × N × α 经减速箱放大 N 倍后 = N² × I_rotor × α 所以输出轴"感觉到"多了一个 N² × I_rotor 的惯量。 这就是 armature。… 关键是那个平方。减速比 9:1 就放大 81 倍。”

• Three hardware accounts locked the run design point - and the knee's real speed ceiling is tau_limit/kd, not the firmware limitfeasibility-accounts-lock-design-point

  Mechanism understoodrunplant-calibrationplant-calibrationactuator-modelinghardwareprocess

  Before opening a dynamic-gait training line, compute the full account set - tau_limit/kd effective speed ceilings, joint ROM under the intended reference geometry, and thermal RMS at the duty cycle - and let the accounts lock the design point; move only to pre-registered in-table alternates, re-running the accounts first.

  Symptom

  The run line was believed to require a firmware raise of the RS06 speed limit (10 rad/s) as a hard precondition, and the feasibility script's motor-envelope scan had marked 80/100 mm foot-lift cells "physically feasible".

  Context

  Three added accounts re-decided everything. (1) Damping tax: in MIT mode tau = kp*(q_des-q) - kd*qd, so sustained rotation is capped at tau_limit/kd = 12/1.5 = 8 rad/s - below the firmware's 10; at peak speeds 6.7-7.9 rad/s the damping term alone eats 10.1-11.9 N*m (84-99% of the torque limit). "提固件 limit_spd 越不过这道税 —— 它是 kd 与限扭的比,不是固件旋钮." (2) Joint ROM: the feasibility script had checked motor envelopes but NOT joint range - the ankle-pitch ROM caps 1:2:1 leg-shortening lift at 62 mm (soft) / 77 mm (hard), so the 80/100 mm "feasible" cells were voided; also firmware-independent. (3) Ankle thermal: duty 0.40 puts ankle RMS at 87% of continuous rating (0.35 -> 93%); long-period big-stride cells hit both ankle torque peak and heat. Verdict: firmware raise DEQUEUED (50 mm design point needs knee 6.7-7.3 < the 8 rad/s effective ceiling < firmware 10); vel_limit stays 10 so sim == robot. The three accounts uniquely lock the design point - 50 mm lift / T 0.60 s / duty 0.40 - "三笔账 唯一锁定,不是调参空间", with pre-registered alternates allowed only inside the table and only after re-running the accounts.

  Change

  Design point frozen from accounts; hardware precondition reversed by arithmetic rather than by test; reference amplitude (0.84 rad = FK inverse of 50 mm) derived, per-joint action scales sized to the required travel (knee 0.9, hip_pitch 0.6, ankle deliberately NOT amplified - hard limit is adjacent).

  Outcome

  A firmware work item left the critical path; an infeasible region of the design space was closed before any training; the remaining risk (knee tracking lag from the damping tax) was pre-registered with its own criterion and in-table fallback (duty 0.35) - "这不是'奖励没调好', 是 plant 账".

  Mechanism

  PD actuators in MIT mode pay kd*velocity out of the same torque budget that tracks position, so the effective speed ceiling is a ratio of configuration constants, invisible to firmware settings; and feasibility is the intersection of ALL constraint families (torque envelope, joint ROM, thermal RMS) - a scan that omits one family certifies impossible cells.

  Applies when

  • planning running/jumping or any high-rate gait on PD actuators
  • a firmware or hardware upgrade is assumed as a training precondition
  • a feasibility scan covers motor limits but not ROM or heat

  “膝的有效速度顶 = τ_limit/kd = 12/1.5 = 8 rad/s,不是固件的 10。… 提固件 limit_spd 越不过这道税 —— 它是 kd 与限扭的比,不是固件旋钮。… 可行性脚本只查了电机包络没查关节 ROM —— 其 80/100mm 的"物理可行"格作废。… 判决:RS06 提固件对 run v0 不是前置,出队”

• Foot dragging is an attractor, not a low amplitude - and joint damping is the mode switch, adjustable at deploy timeswing-bistability-damping-switch

  Mechanism understoodomniattributionattributiondomain-randomizationactuator-modelingreal-acceptance

  When a quality metric is bimodal, stop treating it as an amplitude to be trained up: map the modes against initial conditions and plant parameters, find the parameter that switches basins, apply it first as a deployment lever, and only then bake it into the training distribution (as a plant-family shift, never as an execution-mapping change).

  Symptom

  s2e_pd-1400's swing height "median 12.1 mm" hid a perfect bimodal distribution: 20 seeds split into a drag mode (2.6-4.9 mm) and a step mode (19.3-24.0 mm) with NOT ONE seed in between - the median sat in the empty gap, and "swing debt -11 mm" really meant "50% probability of falling into the drag attractor".

  Context

  Two designed experiments closed the mechanism. Test A (nominal plant, 40 seeds): step 42% / drag 58% / middle 0 - at nominal gains, initial conditions alone pick the mode, both modes 100% survivable. Test B (fixed init, kp x kd grid): kd is the mode SWITCH - at kd 1.3 all surviving cells step (13-22 mm), at kd 0.7 nearly all drag (2.7-4.3), only at kd 1.0 does init get a vote; kp >= 1.2 is dangerous (5/6 falls). Global verification at kd x1.3 (20-seed, delay 2): survival 20/20 at ZERO cost, step share 42 -> 80%, swing median 12.1 -> 18.4 mm, slip record low 334, thicker tilt margin - costs: vx 85 -> 78%, saturation +5 pp. A Pareto sweep then priced the knob: step share 42/72/75/88/82/90 across kd 1.00-1.30 with a linear vx tax of -2.3 pp per 0.1 kd - the basin gain is fully collected at kd 1.20 ("1.30 是 over-damping 纯多付税"). Mechanism: low damping leaves a landing micro-oscillation / ground-slide channel the policy can exploit to drag; damping plugs the channel.

  Change

  Deployment lever adopted: kd-scale 1.20 (conservative 1.15) as the legitimate successor to the power-0.8 crutch ("前者削幅度保稳,后者堵 拖地通道换步态,且不牺牲存活"); training-side prescription: move the DR band to nominal-1.2 x (0.9,1.1) = [1.08,1.32], deleting the [0.7,1.0) drag-teaching zone - a contract-level change requiring digest re-baselining, gated on measuring the real robot's actual kd dispersion first.

  Outcome

  The kd surgery rung (s2e_kd) delivered basin 8 -> 11/20, slip 405 -> 331, vx 81 -> 85% with no out-of-band fragility (below-band check 20/20) - "拐杖烧进分布的正确姿势", explicitly contrasted with the failed s1g amplitude version: this one changes the plant family the policy has seen, that one changed the execution mapping the policy would have to relearn.

  Mechanism

  The gait's swing behavior is a bistable dynamical system whose basin boundaries are set by plant parameters; a policy trained across a kd band that includes the drag basin has learned to inhabit it. Shifting the deployed (and then trained) damping moves the system into the step basin without touching the policy - a plant-side fix for what looked like a training deficiency.

  Applies when

  • a gait quality metric splits into distinct modes across seeds
  • deciding between more training and a gain/damping change
  • converting a deployment crutch into a training-distribution change

  “20-seed 里拖地模式 2.6~4.9mm 与迈步模式 19.3~24.0mm 各半,中间一个不落 … kd 是模式开关——kd1.3 下 6/6 存活格全迈步 … kd0.7 下几乎全拖地 … swing 债的解(至少大半)在部署端阻尼档,不在训练端 … 机理:低阻尼下落脚微振荡/贴地滑给了策略顺势拖行的通道,加阻尼堵之。”

• A policy's gain profile is part of its contract - the one-leg policy needs per-joint gains the default profile lacks, and the manifest refused an evaluation under the default once; the recovery contract's beta was never stamped, a known gap not to repeatgain-profile-belongs-in-the-stamp

  Observed onceonelegreal-deploycontract-freezeactuator-modeling

  Stamp everything that defines the closed loop a policy was trained in - gains included - into its manifest, and make every consumer refuse a mismatch; a profile field that is not in the stamp is a silent misconfiguration waiting for an operator to forget a flag.

  Symptom

  A policy trained with hip_roll kp 80 and ankle_roll kp 60 behaves differently, or falls, under the default kp 20/12 profile - and the gain profile is a command-line flag an operator can forget.

  Context

  The one-leg line added a gain_profile field to the contract so the stamped manifest carries it; the spec's deployment note says the manifest guard blocks rl_default and that it had already bitten once in simulation (an evaluation run without the one-leg profile). The same spec states the general rule - any new profile field must be synced into the manifest builder - and names the counter-example: the recovery line's beta was never put into the manifest. The recovery line itself had decided that its anchored authority is computed from the base rl gains and written into the contract so it cannot drift with the gain flag, and that the older kp x 0.9 profile chosen in the V0 era does not match the beta contract and must not be used.

  Change

  Gain profile as a contract field checked at load; per-contract gain choices written into the run sheets.

  Outcome

  Evaluations and hardware runs of the one-leg policy run under rl_oneleg or are refused; the recovery beta gap stayed recorded as known.

  Mechanism

  A policy is trained against a closed loop whose gains are part of the plant; running it under other gains is an out-of-distribution plant, exactly like a wrong observation scale.

  Applies when

  • a skill introduces per-joint or skill-specific gains
  • deployment gains are chosen by a command-line flag
  • adding any new field to a policy profile

  “增益档 `--profile rl_oneleg` 必须给 —— manifest 防线会拦 `rl_default`（sim 已咬合一次） … （recovery 的 β 未进 manifest 是已知缺口，不再复制）”

• Guessed joint friction was 2.5x low and damping 5x high - measure, then DR around nominalfriction-measured-not-guessed

  Mechanism understoodwalkplant-calibrationplant-calibrationdomain-randomization

  Measure frictionloss and damping separately (they need different rigs), put the measured value at DR center, and express DR as an additive band around that nominal - a DR range around a guessed value can exclude the real robot entirely.

  Symptom

  Old MJCF friction values were invented, not measured; when finally measured, every guessed value was wrong by a large factor in some direction.

  Context

  Joint friction split into Coulomb (frictionloss, tau_c) and viscous (damping b). Measured with the robot hung from a crane (吊机测) while armature was measured no-load; the two measurements are deliberately separated. Old MJCF: frictionloss 0.05, damping 0.1, DR joint_friction range [0, 0.1] "凭空拍的" (made up out of thin air).

  Change

  Replace guessed values with measured ones - frictionloss: RS06 0.15 / RS02 0.12 / RS00 0.13 N*m (old 0.05, i.e. 2.5x too low); damping: 0.02 N*m*s/rad on all three motor types (old 0.1, i.e. 5x too high). DR reshaped from an absolute made-up range [0, 0.1] to an additive band around measured nominal: joint_friction_add [-0.05, +0.10].

  Outcome

  "摩擦定稿(与 armature 一起, plant 参数第一次全部来自实测)" - friction frozen as part of the first fully-measured plant; DR now brackets a measured truth instead of spanning an invented interval.

  Mechanism

  Coulomb friction and viscous damping have opposite behavioral signatures (constant-torque threshold vs velocity-proportional drag); guessing both wrong in opposite directions gives a plant that is simultaneously too easy to start moving and too hard to move fast. DR centered on a wrong nominal makes the policy robust to a family of plants that does not contain the real one.

  Applies when

  • plant friction/damping values have no measurement provenance
  • DR ranges are absolute intervals rather than bands around a nominal
  • policy is over- or under-damped on hardware relative to sim

  “测关节摩擦。吊机测，而armature应该空机测试。… frictionloss τ_c (N·m) │ 0.15 │ 0.12 │ 0.13 │ 0.05(低 2.5×) … damping b (N·m·s/rad) │ 0.02 │ 0.02 │ 0.02 │ 0.1(高 5×) … DR │ joint_friction_add: [−0.05, +0.10] 叠标称 │ 旧 [0, 0.1] 凭空拍的”

• Audit which joints your imitation term constrains - a task that needs deviation is fighting the referenceimitation-term-scope-audit

  Mechanism understoodomnireward-shapingreward-shapingcurriculum

  List which joints your imitation/deviation terms actually constrain and check the new skill's required motion against that list; for balance-coupled joints deliver references as feed-forward residuals, not absolute-position targets - and never assume "reference = 0" is neutral.

  Symptom

  Sidewalk would not learn despite a dedicated tracking reward; meanwhile the gait-shaping imitation term (joint_pos_ref) computed its error norm over ALL 12 joints while its reference covered only the 6 sagittal joints - roll/yaw reference was constantly 0.

  Context

  Two prior generations had shown the forward gait itself was taught by joint_pos_ref, not discovered by PPO (v6 halved the shaping and swing height collapsed 35 mm -> 4 mm). So the reference is load-bearing - but sidewalk requires hip_roll to deviate from nominal, and the all-joints norm punished exactly that deviation: "一边悬赏一边罚过程" (posting a bounty while punishing the process). A follow-up experiment (C4-redo3, free_roll=True releasing the 4 roll joints from the norm) raised the regularization headroom 6x -> 27x yet sidewalk stayed flat and released hip_roll wandered, killing other skills - net negative, withdrawn. A --roll-absolute probe showed the converse failure: pinning roll to a clock-driven absolute trajectory drove tilt 6.9 -> 13.7 deg. Conclusion recorded: absolute-position imitation cannot teach actions that must be superimposed on state feedback.

  Change

  The audit reframed the problem: neither punishing roll deviation nor freeing roll nor absolute roll tracking works; the reference for a balance-coupled joint must be delivered as feed-forward under the policy's residual control (see feedforward-for-phase-locked-skills).

  Outcome

  free_roll rung: joint_pos_ref term rose 0.887 -> 1.104 (release confirmed effective) but vy stayed flat; regularization hypothesis eliminated by experiment.

  Mechanism

  An imitation error norm defines a cage: joints inside it are pulled to the reference in absolute position, so any skill requiring systematic deviation is taxed per step; but joints carrying active balance cannot follow absolute references either, since their correct position depends on state. The scope and the delivery mechanism of the reference are therefore design decisions per joint, not defaults.

  Applies when

  • adding a skill that moves joints your reference sets to zero/nominal
  • an imitation or deviation penalty coexists with a new tracking reward
  • considering releasing joints from a shaping term mid-lineage

  “前进步态也不是 PPO 自己发现的，是 joint_pos_ref 教出来的（v6 砍半塑形 → 抬脚 35 mm 塌到 4 mm…）。而 ref_joint_offset 原本只写 6 个矢状面关节，roll/yaw 参考恒 0 —— 侧走既没被教，roll 一偏离 nominal 反被 joint_pos_ref 扣分。一边悬赏一边罚过程。”

• Training-log reward values and fixed-command eval values live on different distributions - comparing them once claimed a 44% improvement that was really 6-10%same-distribution-reward-comparison

  Mechanism understoodwalksim-evalmeasurementattributionprocess

  Quote reward-term values only with their distribution attached (command range, DR on/off, environment), and compare across runs only when those match; re-measure in a common environment before claiming any improvement percentage.

  Symptom

  A v6-era analysis concluded slip had dropped 44% by comparing the training log's Episode_Reward against values calibrated in a fixed-command play environment; a same-condition re-measurement showed the true improvement was 6-10%.

  Context

  The training log's reward is an expectation over the training command distribution (vx 0.15-0.5, yaw +/-0.6, with pushes and domain randomization); play-environment calibrations are taken at a single fixed command with DR off. Subtracting one from the other compares apples to oranges - the warning was written into the v7 pre-flight: "奖励数值只能在同一指令分布下比较 … 拿它和固定 cmd 的 play 环境标定值相减会得出错误结论(v6 那轮已经栽过一次)".

  Change

  Rule adopted: any before/after reward-term comparison must hold the command distribution, DR state, and evaluation environment fixed; training-log values compare only against training-log values of runs with identical command/DR configs.

  Outcome

  The phantom 44% improvement was retracted; later term-level accounting (e.g. the C4 ignore-floor work) consistently specified its distribution before quoting numbers.

  Mechanism

  A reward term's expectation depends on the visited-state distribution as much as on the policy; changing the command distribution or DR moves every term's baseline. Cross-distribution differences therefore measure the distributions, not the policy change.

  Applies when

  • comparing reward telemetry across training runs or vs play evals
  • claiming improvement percentages from training logs
  • term-level reward accounting for diagnosis

  “奖励数值只能在同一指令分布下比较。训练日志的 Episode_Reward 是在训练指令分布上算的(vx 0.15~0.5 / 偏航 ±0.6 / 带推力与域随机化), 拿它和固定 cmd 的 play 环境标定值相减会得出错误结论(v6 那轮已经栽过一次: 据此以为滑移降了 44%, 同条件对拍只有 6~10%)。”

• A hardware run without its log is an anecdote - the first real get-up's policy, gain profile and log were never recorded, two CSVs stayed "to be reported", and runbook commands wrote different policies' logs under one copied filenamehardware-log-is-the-attribution-input

  Replicatedinfrareal-deployreal-acceptancemeasurementprocess

  Make the log part of the run: name it from the policy and conditions automatically (never by hand-copied filenames), record the policy digest and gain profile inside it, include what the open questions need (torque, joint positions and targets), and treat a session without a collected log as incomplete.

  Symptom

  The recovery line's oldest open question - whether Isaac or MuJoCo reads torque demand correctly - was waiting on real-robot logs that never arrived, and the verdicts that did arrive could not be tied to files.

  Context

  deploy_policy writes a CSV per run (--log); the runbook's own analysis snippet reads its joint-position, target and action columns (q_, tgt_, act_), and the recovery hanging checklist asks for torque and joint logs for the whole run, to be compared with simulation. The first real get-up (08-09): policy, gain profile and log "to be recorded later". The first real A/B (08-11): v2_5b's result and both policies' CSVs "to be reported". In the runbook's walking commands, three runs of two different c4 policies log to real_s1e_pw08_teleop_0808.csv, and s1e and s2e_fric runs log to real_c2_700_pw08_teleop_0808.csv - filenames copied from other commands.

  Change

  None recorded; the spec kept listing the open-loop comparison as waiting for real logs.

  Outcome

  No real-robot log appears in the recovery spec through §50, so the simulator disagreement stayed unresolved and hardware verdicts stayed unattached to data.

  Mechanism

  Attribution needs the run's identity (policy digest, profile, conditions) and its signals in one artifact; a filename copied from another command mislabels the file, and a log not collected at the session is rarely collected later.

  Applies when

  • planning a hardware session whose result should settle a sim question
  • log filenames are typed or pasted by hand
  • hardware feedback arrives as prose without files

  “python tools/deploy_policy.py --policy train/policies/omni_c4_ff800_pj.onnx … --log train/real_logs/real_s1e_pw08_teleop_0808.csv … q,t,a=d[:,c("q_")],d[:,c("tgt_")],d[:,c("act_")]”

• After installing the measured plant, re-run all generations paired on old and new plant - identity metrics carry verdicts, physics metrics re-baselineplant-swap-invariants-vs-shifts

  Mechanism understoodwalksim2sim-gatesim2simplant-calibrationgate-batteryattribution

  Treat every plant upgrade as an era boundary: re-run the retained policy set paired (same seeds/flags) on both plants, carry forward only verdicts whose metrics proved plant-invariant, re-baseline the rest - and mine the systematic shifts as measurements of the old plant's biases.

  Symptom

  With the plant finally fully measured (weighed masses 9.792 kg, bench-identified armature, in-situ friction), no historical sim number was comparable to new runs - "历史 sim 数字跨纪元不可比" - and it was unknown which historical verdicts still held.

  Context

  The era-2c cross-test ran all seven walk generations on the complete plant under one harness (14/14 survived), then re-ran the same 14 configurations on the OLD plant retrieved from git, same flags and seeds, with a self-check (one historical record reproduced digit-for-digit). The split was clean. Policy-identity metrics moved essentially zero across the plant swap - dominant frequency (v7's period-doubling 1.20 -> 1.20), knee amplitude (9.9 -> 10.0), foot distance (+/-2 mm), saturation (100 -> 100, 0 -> 0) - so all seven cross-generation verdicts (freeze signature, saturation-line closure, knee-collapse location, slip-penalty accounting, N2 lineage, v6's balance, v11's triad) were re-confirmed on the honest plant. Plant-physics metrics shifted systematically with ordering preserved: slip down 10-25% (measured friction makes ground-twisting costlier), landing vertical velocity down 15-50% ("旧 plant 高估落地 凶度"第二次独立证实), landing force mixed (mass up 2.2% vs friction braking the swing - two effects fighting). Exactly ONE behavior-level change: v8's low-speed period-doubling vanished (1.30 -> 2.50, lift normalizing) - confirming it had been machine-dependent bifurcation-edge behavior that armature+friction push off the knife edge, while v7's period-doubling stood untouched: saturation-freeze-driven, a policy property, not a numerical accident.

  Change

  Era re-baselining protocol: after any plant upgrade, one paired same-seed sweep of all retained generations on old and new plant; verdicts keyed to identity metrics carry over, thresholds re-read against the new-plant table, and the differences themselves become plant-physics findings.

  Outcome

  Seven verdicts survived with evidence rather than assumption; two causes of the period-doubling family were separated with plant-side proof; and the sim's landing-violence overestimate was independently confirmed a second time.

  Mechanism

  A policy's structural properties (frequencies, amplitudes, frozen joints) are functions of its weights and survive plant changes; contact-mediated quantities are joint properties of policy and plant and shift when the plant becomes honest. Pairing seeds across plants isolates the plant's contribution exactly, so the sweep both validates history and measures what the old plant had been lying about.

  Applies when

  • installing measured masses/armature/friction into the sim
  • historical thresholds are cited across a plant change
  • a hardware-only behavior might be bifurcation-edge sensitivity

  “策略身份指标逐位不动:主频(v7 1.20→1.20)、膝摆 … 这些是策略属性,plant 换代携带无损,历史定论因此全部成立。… 唯一行为级变化:v8@0.15 的倍周期消失(主频 1.30→2.50…)——印证当时"分岔边缘、机器相关"的判定:armature+摩擦把 v8 推离刀锋;v7 的倍周期纹丝不动(1.20→1.20),它是饱和冻结驱动的深层属性,不是数值巧合。”

• Export every CAD part in the whole-machine frame so URDF rotations are zero and inertia is exacturdf-shared-origin-export

  Observed onceinfraplant-calibrationplant-calibrationhardwareprocess

  Generate the model so that correctness is structural: shared-origin STL export, zero rotations, subtraction-only origins, and an explicit 1e-9 g*mm^2 -> kg*m^2 conversion - never hand-rotate inertia tensors.

  Symptom

  Hand-assembled URDFs accumulate per-link rotation/origin errors and unit-conversion mistakes in inertia tensors - silent plant corruption that no later calibration can cleanly fix.

  Context

  Documented CAD -> URDF -> USD procedure from a successful Isaac Lab deployment, kept as the recipe if Lucen regenerates its model.

  Change

  (1) In CAD, align the whole robot to Z-up, X-forward (Isaac Lab convention) and ground the assembly; (2) export each STL with other parts hidden but the machine's shared origin kept, so all parts share one origin, every URDF rotation is 0, and inertia matrices equal CAD values directly; (3) units: Fusion 360 gives g*mm^2, URDF wants kg*m^2 - multiply by 1e-9; (4) link origin = negative of the joint position; link COM = CAD COM minus joint position; joint origin = difference of the two joint positions; (5) after URDF -> USD import, open the USD separately and set it instanceable before saving.

  Outcome

  A URDF whose rotations are all zero and whose inertia tensors are CAD-exact, eliminating an entire class of hand-transcription plant errors.

  Mechanism

  Keeping one shared origin turns every frame transform into a pure translation computable by subtraction, and leaves inertia tensors in the frame CAD already computed them in - no rotation of inertia tensors, the most error-prone manual step, is ever needed.

  Applies when

  • building or regenerating URDF/MJCF from CAD
  • inertia or frame bugs suspected in the plant model
  • importing URDF into Isaac Lab / USD

  “导出 STL 时隐藏其他零件但导出整机——这样所有零件共享同一原点，URDF 里所有 rotation 全是 0，惯量矩阵直接等于 CAD 值 / 单位：Fusion 360 给 g·mm²，URDF 要 kg·m²，乘 1e-9 / link origin = 该关节坐标取负 … URDF → USD 导入后必须单独打开 USD 设成 instanceable 再存”

• Four in-lineage attempts to widen the standing stance failed - remove a tax, add a joint-space knife, change the target, add a task-space metric penalty - because the stance was the end state of the get-up path; trained from scratch with the right terms it grew right from day onestance-decided-by-get-up-path

  Replicatedrecoveryattributioncurriculumfork-selectionreward-shaping

  A posture a skill ends in is shaped by the path the policy takes to reach it; if several single-variable edits to the terminal-phase reward cannot move it, stop editing that phase and retrain with the terminal constraint present from the start.

  Symptom

  v2_6c stood with its feet 0.159 m apart (task-space) and its hips yawed 45-47 deg the same way, which split on the real robot. Standing-phase reward edits did not move it.

  Context

  V2.7-A removed the flat-feet tax on compensated stances (stance unchanged); V2.7b added a hip-roll lower-bound hinge (+5 deg in 3,000 iterations, yaw ratchet); V2.8 changed the stand_pose target to a wide flat stance (stance unchanged, yaw not unwound, feet nearly overlapping, mu 0.4 transfer 2%); V2.9 penalized lateral spacing in metres (the policy parked just outside the penalty's gate in a lunge, 0% success). The v2_6c get-up goes through a split and closes the feet together as it rises.

  Change

  In-lineage stance surgery was formally closed. V3.1 trained from scratch with task-space stance terms present from the first iteration (and, after P1, a positive width band instead of a penalty).

  Outcome

  V3.1 P1b: lateral stance 0.364 m, foot tilt 0.0 deg, all four categories 100%, MuJoCo mu 1.0 and 0.4 both 100% - with a symmetric toe-out the kinematic audit had not enumerated. P1c (with a yaw guard): 0.355 m, all six acceptance criteria passing, mu 1.0-0.4 all 100%; it became the product.

  Mechanism

  A converged policy does not rebuild the path that produced its terminal posture; a standing-phase gradient only finds the nearest hack around the posture the get-up delivers.

  Applies when

  • the final posture of a transition skill is wrong and resists terminal-phase shaping
  • repeated continuation rungs produce hacks instead of the intended posture
  • deciding between another in-lineage fix and a from-scratch retrain

  “窄站距 + yaw 扭是 v2_6c 起身策略(劈叉起身 → 双脚并拢收势)的**结构性 终态**,不是站立段的孤立参数 —— 站立形态由起身路径决定,在血统内只动 站立段奖励改不动它。”

• Ungated phase shaping made standing 42x more expensive than stepping - and the stepping was cooking the hip motorsmoving-gate-42x-stand-tax

  Mechanism understoodomnireward-shapingreward-shapinghardwarereal-acceptanceprocess

  Gate every phase/clock-driven shaping term on the command that justifies motion, price the cmd=0 case explicitly during design - and when a reward flaw is sim-only, book it with trigger conditions instead of operating immediately on a working lineage.

  Symptom

  At cmd = 0 the sim policy never stood still - it stepped in place and crept 0.98 m per 20 s; on the real robot the same lineage's stepping made hip_roll motors run 20 degC hotter than every other joint (43-48 degC vs 25-28).

  Context

  The arithmetic closed it: the three phase-shaping terms (joint_pos_ref 1.6, feet_contact_number 1.2, feet_clearance_swing 1.6) are driven by the gait clock with NO command gating, so standing at cmd=0 forfeits 3.32/step of shaping while honest standing earns only 0.078 of tracking - stepping wins 42x. The heat chain: perpetual stepping = perpetual single support = one hip_roll stalled at ~4.3 N*m (25% of torque limit) carrying the torso's frontal-plane moment - two hip_rolls = 90% of whole-machine steady-state I2R; measured stand-vs-step comparison: total heat -71% when actually standing. The suspended test acquitted the actuator (0.21 rad sag -> 0.0008 rad in air) and mechanics vetoed the easy fix ("降 kp 救不了热" - equilibrium torque equals the external load regardless of kp). The fix (moving_gate: hard-gate the three shaping terms on |cmd| > eps) was designed - then DEFERRED by the user because the real robot at the time stood fine: "真机不表现该问题, 为真机不存在的病改奖励表不划算", with written trigger conditions (C-ladder stand row persistently failing, or real robot starting to step/drift at cmd=0) and the known hazard tag (this is exactly the reward-change class that triggers the B-arm signature). When the real robot later DID step and cook, the booked trigger fired and moving_gate moved from debt to to-do with its benefit re-priced: "停止空烧 hip_roll,稳态发热降 ~71%".

  Change

  moving_gate designed with the gate_by_cmd convention; deferral, triggers, and expected heat recovery all pre-registered instead of patching the reward for a then-sim-only symptom.

  Outcome

  The cmd=0 stepping went from mystery to closed arithmetic; the thermal measurement (hip_roll +20 degC) quantitatively confirmed the 90%-of-heat prediction; the reward change waited for real-world justification instead of spending a risky revision early.

  Mechanism

  Clock-driven shaping terms define a perpetual-motion bounty unless gated by command; the resulting idle gait is not a training bug but the table's optimum. Its cost surfaces on hardware as stall-torque heating set by statics (mass x lateral offset), which no gain change can remove - only removing the motion (gating) or widening the stance can.

  Applies when

  • the policy steps in place or creeps at zero command
  • specific joints run hot in idle behaviors
  • deciding when a known reward flaw justifies a risky mid-lineage fix

  “塑形合计 −3.32/步 … 净: 站定亏 42 倍 … 两颗 hip_roll 4.29 / 4.09 N·m(各占限扭 25%),占全机稳态 I²R 的 90% … 吊挂实测 hip_roll 跟踪误差 0.21 rad → 0.0008 rad … 降 kp 救不了热 … 真机不表现该问题, 为真机不存在的病改奖励表不划算”

• Calibrate a wall penalty by measuring healthy and sick policies - healthy pays ~0, the disease pays a wallcalibrate-threshold-between-healthy-and-sick

  Mechanism understoodwalkreward-shapingreward-shapinggate-battery

  Calibrate every threshold penalty by evaluating its exact formula on replays of at least one healthy and one sick policy: place the threshold between their distributions, size the weight so the sick policy pays a decisive fraction of tracking while the healthy one pays ~0, and pre-compute neighboring thresholds for cheap adjustment.

  Symptom

  Real walk_v7 occasionally clipped its own legs (stance narrowed to 133 mm mean vs nominal 214.5); a foot-distance penalty was needed, but an uncalibrated threshold/weight risked either doing nothing or becoming a reverse barrier.

  Context

  The term (relu(d_min - lateral foot distance), measured in the base yaw frame because world-frame y is meaningless after turning) was calibrated before training by replaying three known policies through the exact reward formula at the acceptance operating point: healthy v5 (183 mm) pays 0.6% of tracking - effectively free; narrowed v7 (133 mm) pays 22% - effective widening pressure; collapsed v8 (93 mm) pays 55% - a wall. d_min 0.16 was placed deliberately between healthy and sick, with alternative thresholds (0.14/0.18) pre-computed in the tool output for later adjustment. The shape self-check was named as a standing question: "先问'零代价的选项是什么'" - the zero-cost region must be exactly the desired behavior.

  Change

  feet_lateral_distance added at d_min 0.16 / weight -10, with telemetry expectation pre-registered (should decay toward 0 as stance learns >160 mm; if bow-legged over-widening >214 appears, only then discuss an upper bound).

  Outcome

  v9_probe on hardware: no leg contact ("没碰腿(N2 兑现)"), stance min 145/126 mm green; the term's zero-cost design left healthy gait untaxed.

  Mechanism

  A relu threshold penalty defines a free region and a priced region; its correctness is entirely in where the boundary sits relative to the healthy and pathological distributions. Replaying known-good and known-bad policies through the exact formula measures both distributions in the term's own currency, making the threshold and weight a placement decision instead of a guess.

  Applies when

  • adding any relu/threshold-style wall penalty
  • a safety margin (foot distance, joint limit, clearance) needs enforcement without taxing normal behavior
  • choosing between candidate thresholds for a new term

  “形状自检 (v6 横向组/v8-B 的教训 —— 先问"零代价的选项是什么"): 标称站距付 0, 健康步态付 ~0, 收窄才付费 … v5(健康) 183 mm … 0.6% ≈ 免费 | v7(收窄) 133 mm … 22% —— 有效推宽 | v8(塌陷) 93 mm … 55% —— 墙 … d_min=0.16 恰在 v5(183)与 v7(133)之间”

• Fix a too-deep nominal pose before adding any penalties - the default stance defines the basin training starts innominal-posture-before-penalties

  Mechanism understoodwalkreward-shapingreward-shapingplant-calibration

  Before tuning penalties on a degenerate gait, audit the nominal pose and height targets against morphology and published ratios; if the default stance encodes the degenerate behavior, fix it first - and recompute dependent quantities (init height) by FK, not by hand.

  Symptom

  Policy lived in a crouched shuffle; nominal knee angle was 0.5 rad (28.6 deg) - deeper than published configs (Unitree G1 0.3 rad / 17.2 deg, Booster T1 0.4 rad) - so the policy's starting point and its action-space center both sat inside the crouch basin.

  Context

  Initially ranked "secondary" in the local diagnosis, this was promoted to co-first priority by the cross-check against published reward tables, which states that with nominal knee flexion above ~0.4 rad, fixing the posture must precede adding any penalties ("改这个之前别加任何 惩罚都是白费"). Companion base-height items: walk profile had weakened base_height_l2 to -5.0 (base class -10, field standard -10 to -20, "the second most common cause of death"), and the height target must be the STANDING height (0.384), not the crouch height.

  Change

  Nominal knee 0.5 -> 0.3 rad with init_base_height recomputed by MuJoCo FK (0.3739 -> 0.3802); base_height_l2 restored to -10 with standing height target; both bundled as first-priority alongside the clearance term.

  Outcome

  Part of the v5/v6 package that lifted swing height to 34 mm and tracking to 87%; the crouch basin stopped being the default answer.

  Mechanism

  The nominal pose is the fixed point every regularizer pulls toward and the point where action=0 lands; if that point is itself the degenerate posture, every penalty fights the geometry. Correcting the attractor is prior to shaping the gradient field around it.

  Applies when

  • policy converges to a crouched or collapsed posture
  • nominal joint angles were chosen for stability rather than gait
  • base-height reward targets or weights were locally weakened

  “研究明确说"nominal 膝屈超过 ~0.4 rad 必须先改,改这个之前别加任何惩罚"。我们是 0.50,超标。… base_height_l2 在 walk profile 里被减到 −5.0(基类是 −10)。研究说这是"第二常见死因"且应 −10 ~ −20。改回 −10。目标高度用站立高 0.384 是对的(研究要求 target 必须是*站立*高度而非蹲姿)。”

• A suspended (no-load) test acquits or convicts the actuator before you blame authoritysuspended-test-isolates-actuator-authority

  Mechanism understoodomnireal-acceptancehardwarereal-acceptanceattribution

  Before attributing a failure to actuator authority, measure no-load tracking error and steady-state torque fraction; blame authority only if the task fails while the error grows with demanded force - and then fix gains or targets, not training.

  Symptom

  hip_roll sagged 0.21 rad on the ground and saturation questions loomed over the sidewalk plan - was the roll axis physically too weak (authority), or was something else limiting it?

  Context

  Before C4, the roll-authority question was settled by measurement triage: suspended test (--suspend, feet off ground) showed hip_roll tracking error 0.0008 rad - actuator acquitted; the entire 0.21 rad ground sag is load-induced. Steady-state torque was 25% of limit - 75% margin remains. Since sidewalk needs lateral force, not exact angles, authority was ruled "not a hard limit", with a pre-registered criterion for when it WOULD become one: sidewalk fails to track AND roll error keeps growing - then the fix is raising hip_roll kp or lowering the vy target, not more training.

  Change

  Hypothesis "roll authority insufficient" demoted from blocker to a monitored branch with an explicit trigger condition; C4 proceeded.

  Outcome

  Later open-loop probes confirmed the actuator could produce the behavior (sidewalk feed-forward ran at full amplitude, 5/5 survival), and the eventual C4 failure causes were measurement and reward, never authority.

  Mechanism

  Suspended vs loaded comparison separates the actuator's closed-loop competence from the load path: tiny no-load tracking error means the motor/controller is fine and any loaded deviation is statics (gravity / stiffness budget, kp trading error for force). Torque-fraction measurement then bounds how much force headroom actually remains.

  Applies when

  • suspecting an axis is "too weak" for a new skill
  • large position sag on a loaded joint
  • deciding between hardware fix, gain change, and more training

  “吊挂（--suspend）实测 hip_roll 跟踪误差 0.0008 rad → 执行器无罪，地面下垂 0.21 rad 全是负载所致；稳态占限扭 25% → 仍有 75% 扭矩余量。… 判据：若 C4 出现「侧走跟不动且 roll 误差继续变大」，那才是权限账 … 解法是提 hip_roll 的 kp 或降 vy 目标，不是硬训。”

• With no term on foot attitude the robot stood on the edges of its feet (ankle roll -26 deg) from R0.5 to V2.5b; pricing it fixed that and turned stance width into the next free variable - the user saw both on video before any metric flagged themunpriced-foot-attitude-is-a-free-variable

  Replicatedrecoveryreward-shapingreward-shapingreal-acceptance

  List every posture quantity the hardware cares about (foot attitude, stance width, yaw, knee flexion) and make sure each is priced by a term with real gradient at the observed error; pricing one exposes the next, so re-inspect the feet-level video after every change.

  Symptom

  Watching the v2_5 video the user said the ankle roll after standing looked very strange - the feet were not flat. The feet view showed the right foot standing on its outer edge; median ankle roll at t = 8 s was -/+26 deg (limit +/-35), mirrored. This was the physical form of the ankle_roll saturation criterion that had failed since R0.5.

  Context

  No term priced foot attitude: feet_contact_upright counts an edge contact as contact, and stand_pose's wide exp kernel (sigma^2 = 9) gives almost no gradient at 0.45 rad. HoST carries an "ankle parallel" term (+20); this table never had one. Edge standing was made a blocking precondition for hardware (continuous ankle load, unstable contact, wear).

  Change

  V2.6 (single variable): flat_feet = (|q_l_ankle_roll| + |q_r_ankle_roll|) x upright gate x height gate, a linear hinge with a 5 deg margin, weight -2, continued from V2.5b.

  Outcome

  Ankle roll -/+26 -> 5.3/5.2 deg, ankle_roll saturation 6.6% (< 10%), feet flat on the feet-view video; success 99.6%, re-falls 0-1%. Then the user watched v2_6: hip yaw constantly tense and the legs very close together. The numbers: hip roll -/+4.9/4.8 deg against a nominal 25 - feet flat and hips open 25 deg cannot coexist without ankle compensation, the new term taxed that compensation, and nothing priced stance width. "Foot attitude as a free variable" was fixed and "stance width became the new free variable" - which the real robot then exposed as splits.

  Mechanism

  An optimizer spends every posture degree of freedom no term prices; closing one reallocates the slack to the next unpriced one.

  Applies when

  • a standing or landing posture looks wrong on video while gates pass
  • a saturation criterion keeps failing on one joint
  • a new posture term was just added

  “用户看 v2_5 视频:"起身之后 ankle_roll 非常奇怪,脚根本不是平着站立"。 … 机理:奖励表**无任何脚掌姿态项** —— feet_contact_upright 边缘接触也算触地, stand_pose 的 exp 核(σ²=9)对 26°=0.45 rad 梯度≈0。脚掌姿态是自由变量。”

• A time gate that had cured one lineage's rushing made the from-scratch lineage trade away its stance width twice (0.364 -> 0.235 m, 0.355 -> 0.251 m) - its disease was absent there, so the fix was retired and the pre-gate checkpoint shippedtime-gate-vs-wide-stance-retire-the-fix

  Replicatedrecoveryreward-shapingreward-shapingcurriculumfork-selection

  Carry a fix into a new lineage only if its disease is present there; a mechanism that cured one lineage can be net negative in another, and when doubling a term's weight recovers almost nothing, treat the two objectives as structurally in conflict and remove the one whose purpose is gone.

  Symptom

  V3.1's phase 2 (the 3 s zero gate on standing income, continued from P1b) kept 100% success on every friction level and slowed the get-up, but the lateral stance drifted 0.364 -> 0.235 m and hip yaw crept to 57 deg against its 60 deg limit. With the width band's weight doubled (P2c, after P1c) it drifted again, 0.355 -> 0.251 m, below the pre-registered 0.30 m failure line.

  Context

  The zero gate had been introduced in V2.5/V2.5b to slow the old lineage's get-up. In V3.1 the rushing was already absent: P1c got up in 0.90-1.06 s with a worst torque ratio of 73.3%, better than the stamped v2_6c, because the full beta curriculum, second-difference smoothing and pull curriculum had cured the violence inside training.

  Change

  Recorded as a candidate law with two data points - the zero gate and a wide stance are mutually exclusive here - and the zero gate was removed from the V3.1 recipe. P1c (the pre-gate checkpoint) went through the full stamp-level acceptance instead.

  Outcome

  P1c passed everything: all six criteria, lateral stance 0.355 m, foot tilt P75 2.0 deg, mu {1.0, 0.8, 0.6, 0.4} x 10 seeds all 100%. recovery_v3_1p1c.onnx was stamped and pushed to the robot channel.

  Mechanism

  The zero gate moves the income toward "stay stable until the end", and under low-friction DR a wide stance has a slip tail, so survival outbids the width band; doubling the band's price bought back only 0.016 m - an auction that does not converge signals structural conflict, not an under-priced term.

  Applies when

  • porting reward mechanisms from an old lineage into a fresh recipe
  • a width, margin or posture metric erodes during a late training phase
  • a weight increase produces a negligible change in its target

  “**定律候选(二实证):归零门 × 宽站互斥**。 … 加价翻倍只挽回 0.016,竞拍不收敛)。 … **归零门是 v2_5 血统的历史包袱,对 V3.1 配方是净负资产,P2 阶段除名 —— P1c 即终点形态**。”

Next page