Training Coach
Doctrine
A report may cite any of these as doctrine-N.
doctrine-1Contract freeze and fingerprint disciplineThe policy I/O contract (observation layout, scales, history semantics, action pipeline) is frozen and fingerprinted; every exported policy is stamped and verified; contract changes ship as new versioned profiles that leave old artifacts bit-identical, and old policies run forever under their era's pinned profile.
Case. The 215-dim omni contract was frozen with a three-machine digest; the one contract-level extension (lateral feed-forward) went in as a new `omni_ff` profile with the old profile provably untouched, and the contract checker caught two real wiring bugs before any training (`contract-freeze-and-checker`). A silently changed gait-clock default would have fed old policies a 25% slower clock - closed by pinned legacy profiles (`legacy-profile-pinning`). A stale derived USD forked plant mass 2.2% until an automated source-vs-derived instrument gated it (`derived-asset-staleness-check`). A gain profile is part of the closed loop a policy was trained in and belongs in its stamp; the recovery line's anchored authority was left out of its manifest and recorded as the gap not to repeat (`gain-profile-belongs-in-the-stamp`), and a second policy behind a deploy-side switch made the handoff state itself a contract (`recovery-two-policies-and-a-state-machine`, `walk-recovery-fsm-handoff`).
Coach application. On any proposal touching obs/action semantics, defaults, or derived assets: demand the version/profile plan, the fingerprint update, and the checker extension in the same change; flag any old artifact that would run under new defaults.
doctrine-2Attribution by resolved training params - never eval-override knobsCapability differences between lineages are explained only by digging each lineage's *resolved* training configuration and eliminating columns; evaluation-side override knobs (kd-scale, power-scale, cycle-time) act on the plant for *every* policy and may serve as deployment mitigations but never as explanations.
Case. Low-friction robustness across 8 lineages x 3840 cells was traced to kd DR *bandwidth* - every lineage had ground friction pinned to (1.0,1.0), so "trained friction" could not be the axis; the parameter axis and the plant axis were explicitly separated after the first attribution conflated them (`kd-bandwidth-mu-law-attribution`). "Weak turning" on hardware was a power-scale plant effect, not a training gap (`deploy-knob-attribution-before-retraining`); slowing the deploy clock was out-of-distribution, not a feature (`cycle-time-override-is-ood`). The ground truth for what a run trained under is the logged per-run config, not the source tree (`resolved-config-is-source-of-truth`).
Coach application. Whenever asked "why is lineage A better", require the resolved-param table first; kill zero-variance columns; refuse explanations phrased in eval-knob terms; when a knob helps, label it deployment mitigation.
doctrine-3PASS gates become constraints; FAIL gates become objectivesOnce a skill passes its gate, that gate converts into a standing regression constraint (budget <= 2/20 against the parent baseline) for all later training; gates currently failing are the only legitimate objectives of the next rung.
Case. The C ladder ran one frozen 13-cell x 20-seed matrix at every rung with promotion = "new skill PASS and old skills within regression budget"; C1 was stopped and re-rooted precisely because it trained away the root's backward PASS (`fixed-acceptance-matrix-per-rung`, `preregistered-stop-criteria-per-rung`). The C4 product shipped only at 260/260 cells with zero regression.
Coach application. Keep the ledger: every PASS adds a constraint row; propose rungs only against FAIL rows; treat any constraint violation as stop-and-attribute, never "the next rung might win it back".
doctrine-4One variable per ladder rung - counted against what the checkpoint sawA rung changes one variable, where "one" is counted against the checkpoint's actual training state, not against the current config's diff; batching is allowed only when each change owns a disjoint symptom space with a pre-registered ablation order.
Case. Two rungs failed identically because resuming s1e-500 under the evolved config silently added four plant variables the checkpoint had never seen ("单变量纪律不只看「我改了什么」,还要看「checkpoint 见过什么」" - `resume-state-dr-audit`). v8 legally batched four orthogonal fixes with a written ablation order (`orthogonal-batch-with-ablation-order`); v9 spent one run completing a 2x2 factorial so either outcome convicted a factor (`fill-the-missing-factorial-cell`); v10b's three-way ablation wrongfully convicted the clock and had to be retried fairly.
Coach application. Before any resume: diff cfg against the checkpoint's logged training state. Before any batch: require the symptom-ownership map and ablation order in writing.
doctrine-5Pre-register risks, readings, and stop criteria before the ladderBefore a ladder or risky rung, write down the known risks, the interpretation of every plausible outcome, and hit-any-one stop criteria - frozen before training, tightened when priors say results should come fast.
Case. The C ladder opened with three numbered risks including the exact falsification condition for its own root choice; A/B arms carried "预注册读法(事后不改)" tables; a level expected to fail was run anyway for its pre-registered diagnostic value (`preregister-risks-and-fork-readings`). Stop criteria caught C4-redo rungs at +200 instead of full caps (`preregistered-stop-criteria-per-rung`); hardware sessions pre-registered per-config expected signatures and the disagreement rule "不改结论改账" (`preregistered-real-expectations`, `feasibility-accounts-lock-design-point`).
Coach application. Refuse to open a rung without the written risk/reading/ stop block; after results, read conclusions off the pre-registered table and flag any post-hoc reinterpretation.
doctrine-6Plant parameters are measured, never inventedEvery plant number carries measurement provenance: armature = N^2 x rotor inertia from no-load tests, friction split by rig and by API column, torque limits shaped by per-joint gait peaks, latency traced through the real pipeline, masses weighed - and DR bands are additive around the measured nominal, sized to the measured dispersion.
Case. Guessed friction was 2.5x low and guessed damping 5x high (`friction-measured-not-guessed`); armature had been 0 with a 9:1 gearbox (81x reflected inertia, `armature-n2-rotor-inertia`); a uniform torque derating was "the wrong shape" vs measured peaks (`torque-limit-shape-by-measured-peaks`); the delay implementation itself was a wrong plant for a whole lineage (`latency-lerp-reverse-extrapolation`); the run design point was locked by three accounts including the tau_limit/kd speed ceiling (`feasibility-accounts-lock-design-point`); identified friction had to land in the right simulator API columns to act at all (`sim-api-friction-columns`). The recovery and one-leg lines opened with the same kind of accounts before any reward existed - a connected static path and the torque along it for an armless get-up, and the gains single support needs to be holdable at all (`get-up-feasibility-accounts-before-training`, `single-support-gain-authority-probe`).
Coach application. For any plant value in a config review, ask "measured how?"; reject absolute ranges with no nominal; check API column mapping and derived-asset regeneration whenever measured values land.
doctrine-7Sim2sim gate before sim2real - under deployment conditionsEvery checkpoint passes a second, independently built simulator before hardware, and both the gate and the smoke loop run under the measured deployment conditions (real pipeline delay, honest contact parameters, the deployment gain/power profile).
Case. The standing order "先sim2sim 再sim2real" (`sim2sim-gate-before-sim2real`); acceptance flipped to match hardware only under measured condim/torsional friction (`eval-plant-honesty-contact-params`); gates moved permanently to `--delay 2` after the kicking incident (`pipeline-latency-is-plant-not-dr`); and the harness itself must be audited - a frame-convention bug in the cross-sim evaluator invalidated a whole line of verdicts (`body-frame-velocity-api-audit`). The recovery line's second simulator caught a torque penalty paid for by bracing the legs together (`torque-penalty-bought-by-leg-bracing`), and a 1.8x torque disagreement between the two plants stayed binding because its one surviving explanation was never tested (`torque-disagreement-between-simulators-unresolved`).
Coach application. Block any hardware request lacking a second-sim PASS at deployment conditions; when sim2sim and training-side metrics disagree, treat the evaluator as a suspect too.
doctrine-8Observation honesty - the actor's inputs are a hardware contractThe actor observes only signals the real robot produces with realistic noise; privileged truths go to the critic; history windows are estimators and must train under plant variation; rewards on quantities the actor cannot observe buy only average suppression, never closed-loop correction.
Case. Ground-truth velocity/forces went critic-only (`observation-honesty-critic-only`); frame_hist under zero DR memorized the trainer's plant fingerprint - 0/20 transfer (`history-obs-needs-plant-variation`); world-frame yaw rewards could not teach pull-back because heading is unobservable to the actor - correction was routed to the deploy outer loop instead of breaking the contract (`reward-observability-limit`, `deploy-heading-loop-and-align-training`).
Coach application. Audit every actor-obs element for hardware existence; require minimal plant jitter whenever history/recurrence exists; for each reward, ask "can the actor see this error?" and route correction tasks to outer loops.
doctrine-9Reward economics are audited in realized currencyReward design decisions are made on realized per-step magnitudes under the actual policy and command distribution: price the do-nothing optimum before adding a mode, compare achieved values to the computed ignore-floor, calibrate thresholds between measured healthy and sick distributions, and ship every new penalty with a withdrawal clause.
Case. feet_air_time at weight 2.0 realized 0.038 vs tracking 1.2 - drag was rational (`realized-contribution-audit`); ignoring a vy command cost 28-180x less than ignoring vx until a gated tracking term was added (`reward-cost-of-ignoring-audit`, `gate-new-reward-terms-by-command`); achieved-vs-floor separated "never learned" from "priced out" (`ignore-floor-diagnosis`); the foot-distance wall was placed between measured healthy (0.6% tax) and sick (55%) policies (`calibrate-threshold-between-healthy-and-sick`); the landing penalty carried a pre-registered stand-down condition and actually stood down (`calibration-threshold-with-withdrawal-clause`); two clearance terms were inert until zero-points and gate occupancy were checked (`inert-reward-term-audit`). A get-up policy sat because three gated terms paid the seated pose 84% of the return and the one term that could tell sitting from standing was an exp kernel reading 4.6e-5 at the real error (`seated-basin-dead-exp-kernel`); a torque-tail term was weighted by its measured steady value beside a peer term after the estimate proved 12x off (`tail-torque-needs-hinge-on-computed-demand`).
Coach application. Never discuss weights in the abstract: demand the realized-contribution table, the ignore-floor number, and the healthy-pay calibration before any reward edit is approved.
doctrine-10The zero-cost option must be the desired behaviorFor every penalty, name what the zero-cost option is; penalize failure events (slip, saturation excess, contact in flight windows), never the motion or joints that healthy behavior uses; make degenerate strategies fatal via termination where penalties cannot price them out.
Case. Joint-usage penalties for drift taxed a 1.4%-of-momentum channel 2.7/step and collapsed training; the slip penalty costs a non-slipping gait exactly zero (`penalize-the-slip-not-the-joint`). A frozen-at-clamp joint pays zero action-rate forever - only a pre-clip saturation penalty flips the cheat economics (`saturation-cheating-zero-rate-cost`). Ungated phase shaping made standing 42x more expensive than stepping and cooked the hip motors (`moving-gate-42x-stand-tax`); crouch-shuffling lived until a height termination deleted it (`termination-closes-degenerate-basin`). A gated penalty is an exit: the policy parked just outside an uprightness gate, then just under a height gate, to stop paying a stance tax, and only a positive band plus an always-on guard closed both (`penalty-gate-is-an-escape-hatch`); a soft-limit penalty that charged the standing pose itself bought a 4.1 deg lean (`soft-limit-penalty-charges-nominal-pose`); an unpriced foot attitude was spent on edge-standing (`unpriced-foot-attitude-is-a-free-variable`); and the one-leg line listed its cheapest cheats before training and still met one through a zero-gradient band (`enumerate-cheapest-cheats-before-training`, `binary-band-reward-fake-touchdown`).
Coach application. Run the "零代价的选项是什么" audit on every proposed term; convert motion taxes into event-conditional penalties; check the termination set against each known degenerate strategy.
doctrine-11Measurement discipline: independent referees, signs, distributionsA disputed measurement is adjudicated only by an independent algorithm from raw state; directional ability requires sign-antisymmetry under command reversal; bimodal metrics are reported as mode shares (never medians, never 3 seeds); ratios are not comparable when totals change; reward values compare only within one command distribution; single chaotic events never cross machines.
Case. The triple reversal - a good metric was "refuted" by a sibling metric that shared the disease (`independent-referee-for-metric-disputes`, `body-frame-velocity-api-audit`); same-signed +/- responses were bias, not turning (`same-sign-response-is-yaw-bias`); the swing median sat in a bimodal gap (`median-hides-bimodal-distribution`); "v6 is jitterier" died on absolute energies (`ratio-metrics-need-absolute-check`); yaw gain measured 15x wrong in an oscillating frame (`heading-integral-not-body-rate`); a 44% improvement evaporated under same-distribution comparison (`same-distribution-reward-comparison`); drift direction was a limit cycle (`multiseed-sign-test-for-drift`); a cross-machine push cliff was chaos (`single-impulse-recovery-is-chaotic`).
Coach application. Before accepting any surprising number: ask for the independent recomputation, the sign pair, the distribution shape, and the comparison conditions. Retract in writing when a metric falls.
doctrine-12The deployment pipeline is plantIrreducible pipeline properties - action latency, rate limits, power/torque scaling, teleop command mappings - are part of the nominal plant, modeled from day one and reproduced in every gate; deploy-side scalings are crutches that flag unmodeled plant, and they cannot be algebraically folded into training constants.
Case. Right-leg kicking was over-trained-delay x loop gain; power 0.8 was a gain-reduction crutch that retired when the delay was modeled (`pipeline-latency-is-plant-not-dr`); power derating damages non-forward axes first (`power-scale-hurts-nonforward-axes`); training at 0.4 scale as the "twin" of deploying 0.5 x 0.8 collapsed 0/20 (`deploy-scaling-not-training-equivalent`); one shared teleop speed sent an out-of-band lateral command and the robot clipped its own foot (`teleop-command-band-per-axis`); the latency DR range had not even covered the measured pipeline (`latency-dr-covers-measured-pipeline`). A rate limiter added at deployment only clipped a policy that kept commanding (`deploy-rate-limiter-windup`); moved into training and anchored on the last command it became an integrator in the balance loop (`slew-anchor-is-an-integrator`); anchored on the measured angle it bounded torque and kept the bandwidth (`beta-anchored-action-target`). The walking lines' safe setting, power-scale 0.8, cut the ends of the recovery policy's full-range travel and left its spikes alone; a gain inside the trained band did the job (`power-derating-cuts-full-range-contract`).
Coach application. Demand the measured pipeline latency/limits in the plant model and in gate conditions; treat every deploy-side derating as a question ("what is this compensating?"); block per-axis command sources that exceed training bands.
doctrine-13DR budget is finite; its distribution is the measured supportRobustness is a conserved budget: disturbance training on an already-hardened lineage borrows from existing margins; DR ranges span the measured deployment support - no fictitious tails (they buy degenerate gaits), no single constants (they allow thin-margin specialization); harden the plant only after the task distribution is final.
Case. The same push dose helped a narrow lineage and damaged a balanced one - budget conservation (`push-dr-conditional-budget-conservation`); wide latency tails bought drag-glide, constant values shipped 60% thinner tilt margins - the answer is a narrow band on the measured support (`dr-tail-plant-continuation`, `constant-value-dr-overfits-margin`); task-first ordering because hardening a soon-to-change task wastes budget (`task-shaping-before-plant-hardening`); COM randomization used deliberately as a behavior-shaping tool, and rolled back on symptom per its own contract (`com-randomization-forces-leg-spread`, `com-dr-rollback-on-symptom`). DR that is switched on can still be thin: the run policy fell in the frontal plane its gain-and-latency randomization never touched (`thin-dr-judged-by-channel-coverage`), and a friction priority settled under one action contract had to be re-measured under the next (`friction-priority-re-measured-after-plant-change`).
Coach application. Before any DR rung: check the untrained policy against the spec, the lineage's current DR load, and the measured real-world range; after it: audit retained margins, not just the new tolerance.
doctrine-14Gates measure what hardware feels: posture, margins, stripped assistsAcceptance batteries carry posture-class rows (tilt max median, per-joint L/R asymmetry, temperature) beside task rows, graded margin columns beside binary gates, chirality scored per side, at least one condition that removes the environment's free stabilization, and validated predictive scalars promoted into the gate.
Case. Three same-shaped judging errors - survival, displacement, wz-difference - all missed what the operator felt; posture metrics had the predictive power (`task-metrics-vs-posture-metrics`, `stand-gate-posture-not-survival`); binary survival saturated and hid a 60% margin gap (`constant-value-dr-overfits-margin`); v5 passed everything on the ground and failed suspended (`suspension-probe-removes-free-stabilizer`); the hip_roll (l+r) scalar predicted real drift direction and ordering and entered the battery (`hip-roll-sum-predicts-lateral-drift`); averages hide chirality (`chirality-scored-separately`); gait-quality gates are judged at speeds that demand a gait (`low-speed-commands-reward-dragging`). The recovery line added the rest of the kit: where failed episodes end, not only where they started (`end-state-confusion-matrix`); a frozen acceptance distribution with a pinned seed (`frozen-acceptance-distribution-and-pinned-seed`); video of the metric rollout itself (`video-as-acceptance-record`); and the admission that a 10 s episode cannot see a stance that fails after a minute (`episode-length-bounds-what-a-gate-sees`). The one-leg line removed a foot-spacing wall that no gate measured, and the feet met on hardware (`removed-wall-returns-on-hardware`).
Coach application. Review every battery for posture rows, margin columns, per-side scoring, and an assist-stripped condition; when operator feel and gates disagree, suspect the metric class first.
doctrine-15Fork and root selection: recoverability, maturity, frozen rewardsChoose fork roots by which candidate's deficits the coming training can pay back (precision is recoverable; lost plasticity, symmetry, and margins are not); prefer mature checkpoints as roots even when younger ones score better as products; never fine-tune through a reward change - continuation is legal only with the reward frozen and plant/DR widening one rung at a time.
Case. s1e-500 beat higher-precision candidates because its exclusive strengths were unrecoverable (`fork-root-recoverable-shortfall`); the b300 arm proved maturity is capital against adaptation shock (`root-maturity-vs-product-quality`); the B-arm scatter/half-recover/collapse signature falsified reward-change fine-tuning and drew the legal boundary for S2 continuation (`fine-tune-reward-change-falsified`).
Coach application. For root debates, build the exclusive-strengths table and ask "which side can be trained back?"; require dual-arm evidence for maturity claims; classify any proposed continuation as reward-frozen or not before approving.
doctrine-16Curricula: verified engagement, lineage counters, disease-phase gatingAutomatic curricula must prove they engage (a saturated ratchet is constant DR wearing a curriculum's name); every ramp counts lineage-cumulative progress, not per-process steps; penalties aimed at late-stage pathologies ramp in after exploration noise decays; difficulty rises on measured per-stratum success, never on schedule.
Case. The s1f ratchet capped at iter 248 and never engaged (`auto-curriculum-engagement-check`); the saturation ramp re-fired at +600 after every resume and no shipped product ever saw the penalty (`curriculum-counter-lineage-steps`); the same penalty worked once gated to the disease phase and became an untouchable mechanism (`gate-penalties-to-the-disease-phase`); record-high aggregate reward hid a fully-failing delay stratum (`aggregate-metrics-mask-subgroup-failure`); bucket share is not a gradient lever (`bucket-share-is-not-a-gradient-lever`). An assist curriculum keyed to a pooled success share was withdrawn on the strength of the categories that already worked (`curriculum-criterion-conditioned-on-lagging-category`); a pace set by per-step income moved only when that income was time-gated (`per-step-income-drives-speed-time-gate`), and the same gate had to be retired in a lineage without the disease (`time-gate-vs-wide-stance-retire-the-fix`).
Coach application. Ask every curriculum three questions: does it engage (show the internal state)? what does it count (process or lineage)? when is it present (against the pathology's phase)? Check where shipped checkpoints sit relative to every ramp.
doctrine-17Probe before training: feasibility first, hypotheses in tablesAfter two failed training attempts at a skill, stop training: demonstrate the behavior open-loop, enumerate hypotheses in a written table audited against actual configs cheapest-first, race one probe per side of the sim2real boundary for hardware-only pathologies, and use suspended tests to acquit or convict actuators before blaming authority.
Case. "在黑暗里试钥匙" - four sidewalk rungs failed until an open-loop probe separated exploration/waveform/authority in one experiment (`open-loop-probe-before-reward-tuning`); the foot-drag mystery fell to a seven-hypothesis config audit (`hypothesis-table-code-audit`); the period-doubling was resolved by racing a reward-side and a plant-side evidence line - and both paid off, one per sub-case (`period-doubling-evidence-race`); the suspended test acquitted the roll actuator in one measurement (`suspended-test-isolates-actuator-authority`). A read-only configuration probe told a wall from a slope in the recovery line's seated basin (`configuration-probe-wall-not-slope`), and the fix it pointed to - where the feet are - took prone from 0/159 to 158/159 (`prone-dead-end-is-foot-placement`); a knob that did not move its variable was recorded as no test of the idea (`dof-vel-penalty-is-not-a-pacing-knob`).
Coach application. When a skill resists training, prescribe the probe before any further reward edits; require verified target trajectories before imitation terms; keep a falsified-fixes list so closed roads stay closed (`amplitude-cut-falsified-yaw-fix`).
doctrine-18External advice is recomputed locally; values transfer as ratiosEvery external suggestion is classified adopt / already-have / modify / trap by recomputing its claim on the local reward table and probe data; numeric values transfer only as dimensionless ratios (to tracking weight, leg length, sqrt(gL), control rate); citations are verified to exist.
Case. "Start vy very small" would have destroyed sidewalk learning on this reward table - the gradient scales quadratically (`external-advice-audit-against-own-arithmetic`); swing-height targets and weights transferred correctly only through leg-length and tracking-ratio scaling (`transfer-ratios-not-absolutes`); the "6-step delay" was refused for lacking a control rate (`latency-dr-covers-measured-pipeline`); a borrowed reference's structure was FK-verified and its amplitude re-derived from the division of labor (`reference-structure-fk-amplitude-division`); retrieval agents fabricated verbatim arXiv quotes - only source-verifiable material was used; and one dismissed suggestion later proved right for a different mechanism, and was credited (`cycle-average-tracking-for-gait-quantities`). An advisor's staged state machine turned out to exist in none of the three papers it cited, and reading them changed the plan (`advisor-paraphrase-vs-paper`).
Coach application. Intercept every "paper X does Y" with the local recomputation; convert absolutes to ratios before comparison; verify quotes; revisit dismissed advice when new mechanisms appear.
doctrine-19Hardware sessions are scripted experiments, not tuning sessionsReal-robot time executes a pre-registered matrix: risk-ordered (baseline first, fragile last with a spotter), stage-gated (suspended smoke before ground), A/B sessions bracketed by a repeated reference run, operators briefed on measured zero-command and untrained-axis behavior, chirality-aware disturbance protocols, no field tuning - the only legal field changes are scripted, single-variable, and self-reversing.
Case. The S2 acceptance sheet (`risk-ordered-real-deployment`, `battery-bracketed-real-ab`, `know-zero-command-behavior`, `push-test-chirality-protocol`, `no-field-tuning-protocol`); the RAM-only torque experiment with automatic power-cycle rollback (`reversible-single-variable-field-experiments`); and the sim-veto rule - even sim's condemnations get one safeguarded hardware check when they judge the purpose-built configuration (`sim-veto-needs-real-confirmation`). The recovery line's first real run went ahead with its preconditions unmet and was stopped as dangerous (`first-real-get-up-violent-stage-one-policy`); after it: a staged hang, mat and floor protocol (`staged-hang-mat-floor-for-get-up`), a fixed power-cycle pre-flight and two-machine discipline (`power-cycle-preflight`, `two-machine-config-discipline`), a fall guard replaced rather than switched off (`fall-guard-becomes-a-state`), and logs that are part of the run (`hardware-log-is-the-attribution-input`).
Coach application. Turn every hardware request into a runbook with order, gates, brackets, briefing, and anomaly plays; refuse improvised parameter changes on the floor.
doctrine-20Close questions in writing; restart when the debt is structuralAudited questions get frozen verdicts with citable wording and an explicit reopening bar; hardware verdicts are dated by deployment-stack and calibration state and expire when those change; and when successive rungs shuffle symptoms without net progress, freeze the lineage as regression baselines, pay the structural debts, and retrain minimal - carrying laws and instruments, not weights.
Case. The chirality and COM questions were closed with frozen wording and "no reopening without new hard evidence" (`frozen-verdicts-semantic-boundaries`); v5/v6's condemnations expired with the deploy stack (`stale-verdicts-under-old-stack`); a 2-degree calibration fix moved the whole runnable envelope (`zero-offset-calibration-shifts-envelope`); plant upgrades are era boundaries with paired re-baselining (`plant-swap-invariants-vs-shifts`); and the 2026-08-05 reset froze v5-v11, fixed the latency FIFO / manifest / sampling / reward-table debts, and restarted - producing the lineage that reached hardware SOTA (`freeze-lineage-fix-structure-restart`, `minimal-reward-table-with-provenance`). The recovery line's real-robot verdicts ended up in three places that disagree, one of them an undated note in a command file (`write-hardware-verdicts-back`).
Coach application. Maintain the closed-questions ledger and quote it when symptoms recur; stamp verdicts with stack/calibration versions; when a team is three rungs into symptom-shuffling, raise the restart question explicitly with the freeze-fix-restart pattern.
doctrine-21Name the quantity in the space it lives inA goal, reward term or acceptance criterion about the feet, the base or the contact state is computed from the quantity itself - world poses, forces, per-category outcomes - never through a joint-angle, single-signal or pooled stand-in that assumes everything else sits at nominal; and every detector is validated on a behaviour known not to contain the event before it becomes a gate.
Case. The recovery line was caught three times: |ankle roll| as "flat feet" sold stance width and the real robot slid into the splits, a hip-roll criterion was confounded by 50 deg of yaw, and the joint table said 0.271 m where the feet were 0.159 m apart; task-space terms produced the first flat, wide stance (`joint-space-proxy-for-task-space-quantity`). Flight detection lied in both directions across two lines - foot height flagged 40% false flight on a walking gait, contact force alone flagged slip chatter as hops (`contact-detector-single-signal-lies`). A pooled height average described a robot that did not exist - six in ten standing, four in ten sitting (`zero-partial-credit-is-not-an-iteration-problem`) - and the walking line had learned the same lesson on yaw rate (`heading-integral-not-body-rate`).
Coach application. For every reward term and gate row, ask what physical quantity it stands for and whether it is measured directly; flag joint-space or single-signal stand-ins for task-space goals, ask for a detector validated on a negative control, and split pooled metrics by category before reading them.
doctrine-22Continuation needs a live gradient; a release is chosen by a scanContinue a converged policy only on a change that creates a live gradient, on a short budget, with every checkpoint scanned on the transfer axis; choose a release by running the full battery over a band of checkpoints and stop on signals, never by taking the last one; and when edits to the terminal phase cannot move a behaviour, roll back and retrain with the constraint present from the start, keeping the order in which the lineage acquired its mechanisms as explicit curriculum phases.
Case. A continuation with no new gradient drifted MuJoCo transfer from 100/98% to 80/28% while every Isaac gate stayed perfect, and a live-gradient continuation at the same depth kept it (`converged-continuation-is-poison`). One-leg checkpoints 100 iterations apart failed 1 and 38 of 40 cells, and late ones degraded (`checkpoint-choice-is-a-full-gate-scan`). Four in-lineage stance fixes failed because the stance was the end of the get-up path, and from scratch it grew right (`stance-decided-by-get-up-path`); fixes stacked on degraded states were rolled back by the user (`stop-stacking-roll-back-and-audit`); and the lineage's final recipe, trained from scratch in one run, sat at 0% because the order of its curriculum was part of the product (`curriculum-history-is-part-of-the-product`). The omni line's short adaptation budgets and mature roots are the same law seen from the other side (`continuation-budget-not-from-zero`, `root-maturity-vs-product-quality`).
Coach application. Before approving a continuation, ask for the new gradient, the budget and the transfer axis in the scan; before approving a release, ask for the scan; after three rungs without progress on the target, propose rolling back to the last good checkpoint and a from-scratch phase plan instead of a fourth patch.
Experience cards
95 cards matching “freeze-lineage-fix-structure-restart”.
After seven patch-generations, freeze the lineage as a regression baseline, fix the structural debts, and retrain from zero
freeze-lineage-fix-structure-restartWhen successive rungs keep trading one symptom for another, ask whether the remaining problems are structural (contracts, latency, sampling, reward-table architecture); if so, freeze the lineage as regression baselines, pay the structural debts, and restart minimal - carrying forward laws and instruments, not weights and weights' patches.
Symptom
The v5-v11 walk lineage had accumulated interacting patches (reward terms, gates, clamps, per-joint scales) faster than it converged on the user's goal; v12's spec itself was superseded before training by an external review's verdict that the remaining problems were structural, not parametric.
Context
The 2026-08-05 status banner records the pivot: the walk profile was rolled back wholesale to v10b parameters, the v5-v11 lineage frozen "只作回归对照" (kept only as regression baselines), and four structural debts were named as prerequisites for a from-zero straight-walk baseline: the action-latency FIFO (fixed with its own test), the ONNX manifest contract, discrete command sampling, and a minimal reward table. The v12 spec - fully designed, partially implemented - was suspended: "本规格挂起,不再按此开训".
Change
Strategy switched from "one more patch generation" to freeze-fix-restart: lineage checkpoints retained as comparison anchors, infrastructure hardened first, then a clean retrain with a minimal reward table (this restart produced the s* generation that later became the real-robot SOTA line).
Outcome
A designed-and-ready training generation was deliberately not run - the review's structural findings outranked sunk design cost; the restart line inherited seven generations of laws (calibrations, gate batteries, falsified fixes) without inheriting their entangled reward table.
Mechanism
Patch lineages accumulate coupled terms whose interactions eventually cost more to reason about than a restart costs to train; the knowledge worth keeping is the laws and instruments (measured plant values, calibrated gates, falsified directions), not the entangled weights. A restart on hardened structure converts the lineage's lessons into a clean initial design instead of another delta.
Applies when
- repeated rungs shuffle symptoms without net progress
- an external review flags infrastructure/contract debts
- deciding between another patch generation and a clean retrain
“同日外部评审定调换路线:冻结 v5~v11 血统(只作回归对照),修结构性问题(latency FIFO 已修 tests/test_action_latency.py、ONNX manifest 契约、离散命令采样、最小奖励表)后从零训直行基线。本规格挂起,不再按此开训。”
train/WALK_V12_SPEC.md § ⚠️ 状态 (2026-08-05) A time gate that had cured one lineage's rushing made the from-scratch lineage trade away its stance width twice (0.364 -> 0.235 m, 0.355 -> 0.251 m) - its disease was absent there, so the fix was retired and the pre-gate checkpoint shipped
time-gate-vs-wide-stance-retire-the-fixCarry a fix into a new lineage only if its disease is present there; a mechanism that cured one lineage can be net negative in another, and when doubling a term's weight recovers almost nothing, treat the two objectives as structurally in conflict and remove the one whose purpose is gone.
Symptom
V3.1's phase 2 (the 3 s zero gate on standing income, continued from P1b) kept 100% success on every friction level and slowed the get-up, but the lateral stance drifted 0.364 -> 0.235 m and hip yaw crept to 57 deg against its 60 deg limit. With the width band's weight doubled (P2c, after P1c) it drifted again, 0.355 -> 0.251 m, below the pre-registered 0.30 m failure line.
Context
The zero gate had been introduced in V2.5/V2.5b to slow the old lineage's get-up. In V3.1 the rushing was already absent: P1c got up in 0.90-1.06 s with a worst torque ratio of 73.3%, better than the stamped v2_6c, because the full beta curriculum, second-difference smoothing and pull curriculum had cured the violence inside training.
Change
Recorded as a candidate law with two data points - the zero gate and a wide stance are mutually exclusive here - and the zero gate was removed from the V3.1 recipe. P1c (the pre-gate checkpoint) went through the full stamp-level acceptance instead.
Outcome
P1c passed everything: all six criteria, lateral stance 0.355 m, foot tilt P75 2.0 deg, mu {1.0, 0.8, 0.6, 0.4} x 10 seeds all 100%. recovery_v3_1p1c.onnx was stamped and pushed to the robot channel.
Mechanism
The zero gate moves the income toward "stay stable until the end", and under low-friction DR a wide stance has a slip tail, so survival outbids the width band; doubling the band's price bought back only 0.016 m - an auction that does not converge signals structural conflict, not an under-priced term.
Applies when
- porting reward mechanisms from an old lineage into a fresh recipe
- a width, margin or posture metric erodes during a late training phase
- a weight increase produces a negligible change in its target
“**定律候选(二实证):归零门 × 宽站互斥**。 … 加价翻倍只挽回 0.016,竞拍不收敛)。 … **归零门是 v2_5 血统的历史包袱,对 V3.1 配方是净负资产,P2 阶段除名 —— P1c 即终点形态**。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §49 终验(2026-08-14) Push DR helped one lineage and hurt another at the same dose - robustness budget is conserved and gets borrowed, not created
push-dr-conditional-budget-conservationBefore opening a disturbance-DR rung, measure whether the untrained policy already meets the spec; if training it anyway, expect the benefit to be conditional on the lineage's existing DR load, grade the intensity, and audit retained margins - budget spent elsewhere will be borrowed back.
Symptom
The push rung's outcome flipped with the lineage: direct +/-0.6 m/s push failed outright on first attempt (base walking collapsed - kd1.2 scan 0/3 from iter 3300, sim2sim self-falls with pushes OFF - no PASS point existed); staged +/-0.3 then gave the narrow-kd single-working-point lineage real gains (push survival 1/5 -> 4/5) while the SAME dose made the dual-working-point balanced-band lineage WORSE (20-seed survival 18 -> 12/20 plus across-the-board push regression).
Context
The four-ladder verdict ("四梯定案", s2e/s2f at both intensities) named the pattern: "push DR 收益条件性" - the benefit is conditional on how much robustness budget the lineage has already spent. The law candidate: "DR 总预算守恒, 平衡带鲁棒性从抗扰余量借" - total DR budget is conserved; a lineage already covering a wide plant band pays for push tolerance out of its disturbance margin. Both S2 ladders therefore closed at the friction rung, with the decisive numerator: untrained push tolerance already met the 4-6 N*s requirement, so the rung was not needed at all ("⑥ push 不训(收益条件性,免训 ±0.6 已达 标)"). The same accounting later justified the C-before-S2 ordering ("push/μ 两轮已实证 DR 预算有限且会被重分配") and trimmed the second S2 pass to three rungs.
Change
Push removed from the standing ladder; graded intensity retained as the method IF a lineage ever needs push training; "does the untrained policy already meet the disturbance spec" instituted as the first check before opening any disturbance rung.
Outcome
Two rungs (push, ground mu) deleted from the second S2 pass on measured grounds; the ladder's real yield was re-stated honestly as precision, not robustness (speed gate 0 -> 20/20, zero-command drift 0.98 -> 0.06 m, but push 159 -> 125/160).
Mechanism
A fixed-capacity policy allocates representation and margin across the training distribution; adding a disturbance axis to a lineage that already spans a wide plant family forces reallocation - the new tolerance is bought with existing margins. Lineages with narrow plant coverage have free budget, so the identical DR dose lands as gain. Benefit is a property of (dose x lineage state), never of the dose alone.
Applies when
- proposing push/perturbation training on a hardened lineage
- the same DR rung helped one lineage and hurt another
- accounting where a ladder's robustness gains actually came from
“push DR 收益条件性 —— s2e⑥a (单工作点血统 kd 窄带) ±0.3 得抗推 1/5→4/5; s2f⑥ (双工作点平衡带血统) 同档反而 20-seed 存活 18→12/20 且抗推全面倒退。规律候选: DR 总预算守恒, 平衡带鲁棒性从抗扰余量借。两阶梯均以 ⑤ 摩擦级收官 … 抗推 4~6 N·s 免训已达标。”
train/OMNI_V0_SPEC.md § 4. ⑥ push 四梯定案 (2026-08-07) The restart reward table lists a reason for every term AND a lesson for every exclusion - absent terms are removed, not zero-weighted
minimal-reward-table-with-provenanceMaintain the reward table as an evidence ledger: every term cites the episode that justifies it, every excluded term cites the episode that convicted it (including the development stage it is valid at), and retired terms are deleted from the config, never left at weight zero.
Symptom
Seven walk generations had accumulated an entangled reward table where nobody could say which term earned its place; the restart needed a table that could be audited line by line.
Context
The minimal table v2 was built under three written principles: "一项管 一件事、结构性反抬脚的项一个不留、塑形只留一套相位逻辑;不在表里的一律 不加" (one term per job; zero structurally-anti-lift terms; exactly one phase-shaping logic; nothing outside the table gets added). Every row carries its provenance (e.g. base_height target = standing height cites the v4 crouch lesson; split x/y tracking cites the merged-exp gradient hole; world-frame yaw cites the v1/v3 body-frame lesson). Every EXCLUSION carries its same-type precedent: feet_landing_vel out because it is poison while the gait is unformed (drag pays 0, lifting pays - the v4-clearance / v8a-B "reverse threshold" family) though it was fine in v7 when the gait already existed - term validity depends on developmental stage; feet_air_time out with its measured non-lever evidence (v6 had it at 2.0 and still lifted 4 mm); and replaced terms are REMOVED from the config ("置 None,不是权重 0 挂着") so audits see truth, not dormant weight.
Change
Reward table rebuilt as ~20 rows each with weight + provenance column; exclusion list maintained alongside with the falsifying episode for each; dormant terms deleted rather than zeroed.
Outcome
Later revisions (S1.2/S1.3) modified the table by citing and updating specific rows' evidence rather than re-arguing the whole design; the table doubled as the lineage's reward-lesson index.
Mechanism
A reward table is a set of standing hypotheses; attaching each row's evidence makes revisions targeted and reversible, and recording why a term is absent prevents the cycle of re-adding known poisons. Deleting vs zero-weighting matters because config audits and DR interactions see the term either way - a zero-weight term is dormant complexity waiting to be flipped on wrongly.
Applies when
- designing a reward table for a restart or new task
- someone proposes re-adding a previously removed term
- auditing which reward rows still earn their place
“原则:一项管一件事、结构性反抬脚的项一个不留、塑形只留一套相位逻辑;不在表里的一律不加 … feet_landing_vel(评审 #4):拖地时代价恒 0、抬脚才收费——与 v4-clearance/v8a-B 同属「反抬脚门槛」家族,步态未成形时是毒;v7④ 加它时步态已存在。… 已从 cfg 移除(置 None),不是权重 0 挂着。”
train/OMNI_V0_SPEC.md § 3. 最小奖励表 v2 / 明确不带 Training the final recipe from scratch in one run - every mechanism the lineage had accumulated - produced 0% and a seated robot; the order in which the lineage acquired those mechanisms was part of why it worked
curriculum-history-is-part-of-the-productA recipe that ends a lineage is not a recipe for a from-scratch run: consolidate it as ordered curriculum phases matching how the lineage acquired its mechanisms, check that every curriculum criterion is reachable from the starting policy, and read the run's raw term values, not the total reward, before calling it green.
Symptom
V3.0 trained the lineage's whole final recipe from scratch in one 9,000 iteration run - full beta curriculum, prone-conditioned pull assist, friction DR, the 3 s zero gate on standing income, flat_feet - testing the proposition "the product is defined by its configuration, not by its training history". Training looked all green (reward 26.33, episode length 500, 100% time-outs).
Context
Read in raw units against v2_6c at the same weights, the green was a seated equilibrium: base_height 0.377 vs 0.640, stand_pose 0.205 vs 0.516, flat_feet 0.0000 (zero because it sits outside its height gate, not because the feet were flat). Acceptance: 0.0% in Isaac at the deployed authority, 0.0% on every MuJoCo friction level, and still 0.0% at the training-time authority (100% seated at 0.222 m, upright and still).
Change
The full stdout (316k lines) was read: the beta curriculum's criterion (standing share over 0.35) was met zero times, so beta never left the wide setting and the policy had no experience at the deployed authority; the pull curriculum was stuck on the same criterion. The lineage had escaped the seated basin with immediate income (V2.0-V2.2) and only then added the zero gate to cure rushing (V2.5); from scratch, the zero gate removed the early "stand fast, earn more" gradient needed to escape. Verdict "the curriculum history is part of the product", limited to n = 1. v2_6c stayed the product.
Outcome
V3.1 kept the order as explicit phases: P1 from scratch with immediate income (zero gate off) until the curricula advance, P2 adding the zero gate. P1b/P1c escaped the seated basin and passed; P2 was later judged net negative and dropped (time-gate-vs-wide-stance-retire-the-fix).
Mechanism
Mechanisms that refine a competent policy (time gates, tight authority) can delete the gradient a naive policy needs, and a curriculum whose advancement criterion the naive policy never meets freezes at its first level.
Conflicts
The spec limits the falsification to "this recipe + this curriculum criterion" (n = 1, no seed sweep, no criterion tuning). V3.1's phased run succeeding is consistent with the ordering reading but changed other terms too.
Applies when
- consolidating a long lineage of continuation fixes into one clean recipe
- a from-scratch run with all mechanisms enabled plateaus early
- curriculum state is not logged or never advances
“命题:产物由配置定义,而非训练史定义。 … 训练 log(完整 stdout 316k 行)`[beta_anchor]` 仅初始 1 行,**达标 0 次** … V2.0~V2.2 靠**即时计酬**爬出坐姿盆地(§33),站立巩固后 V2.5 才装归零门 治"过快"(§39)。**课程史是产品的一部分。**”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §42 V3.0 判决(2026-08-11):从零单 run 全机制 FAIL 于坐姿盆地 Freeze the deployment contract, stamp every export, and let an automated checker catch wiring bugs
contract-freeze-and-checkerFreeze and fingerprint the policy I/O contract; ship contract changes as new versioned profiles that leave old artifacts bit-identical; and extend the automated contract checker with every pipeline change, forcing the new path to execute in the check.
Symptom
Contract-level changes (observation layout, action pipeline) are where silent sim/real divergence is born; two real wiring bugs appeared the one time the action pipeline was extended.
Context
The 215-dim observation contract was frozen ("纪元 3，三机 digest" - an era number plus a digest agreed across three machines); proposals that would break it (e.g. a GRU memory) were rejected on contract grounds. Every exported ONNX is stamped and verified with a manifest (onnx_manifest --stamp / --verify), and deployment refuses mismatched combinations. When C4 added the lateral feed-forward, it went in as a NEW profile (omni_ff) leaving the existing omni profile's behavior bit-identical; the checker (check_contract) was extended to force the feed-forward path to actually execute (cmd_vy=0.13) and promptly caught two genuine bugs: (1) re-clamping with soft_joint_pos_limits after the feed-forward (0.23 rad deviation) instead of reusing the parent's clip; (2) indexing processed actions by asset.joint_names instead of the action term's own contract-ordered _joint_names, which landed the feed-forward on the wrong joints (l_hip_yaw / r_ankle_pitch).
Change
Contract discipline as implemented: frozen dims + digest; manifest stamping and refusal; contract changes only via new versioned profiles; checker updated in the same commit as any pipeline change, with inputs chosen so new code paths are exercised.
Outcome
Both wiring bugs caught before any training or deployment ("两个都是 check_contract 当场抓出来的 —— 这次它值回票价"); old deployments provably unaffected by the new profile.
Mechanism
The contract is the only interface the policy and robot share; freezing plus fingerprinting makes divergence detectable, and an executable checker turns "the contract holds" from a belief into a test - but only if its inputs actually drive the new code path.
Applies when
- modifying the action or observation pipeline of a deployed policy
- exporting policies for hardware
- proposals that would change observation dims or history structure
“契约校验抓到的两个真错误（记账，别再犯）：1. 前馈后误用 soft_joint_pos_limits（URDF 限位 ×0.9）重钳 → 0.23 rad 偏差 … 2. 用 asset.joint_names 索引 _processed_actions → 前馈落到 l_hip_yaw/r_ankle_pitch 上 … 两个都是 check_contract 当场抓出来的 —— 这次它值回票价。”
train/C_LADDER_RUN.md § 3j. 契约级改动 / 契约校验抓到的两个真错误 FK-verify a borrowed reference's structure, then size its amplitude by the reference's job - it pins phase, the policy adds lift
reference-structure-fk-amplitude-divisionWhen borrowing a reference trajectory: verify its structural claim against your own kinematics (an invariant like flat-foot), assign it the phase-pinning job, and size amplitude low enough that the policy contributes the lift - moving toward a proven foreign value in halves, not jumps.
Symptom
walk_v4 had big knee swing (40-46 deg) but only 18-24 mm foot lift - amplitude without hip/knee/ankle phase coordination; later, walk_v5's real-robot swing ballooned to 73.6 deg (sim 55.7) with violent footfalls - amplitude over-driven by the reference.
Context
Structure first: Humanoid-Gym's 1:2:1 hip:knee:ankle reference was verified on the local model before adoption - the ratio exactly satisfies the locally derived flat-foot constraint hip - knee + ankle = 0, FK-tested at multiple amplitudes with sole pitch 0.00 deg throughout. Amplitude second, and here the first reasoning failed honestly: FK said shorter legs need LARGER reference scale (0.30 for 30 mm lift), and the FK was correct - but the premise was wrong ("FK 没错, 但前提错了"): it assumed foot lift must come from the reference. HighTorque Pi, same scale, uses 0.08 with a 0.02 m foot-height target - proof that lift is added by the policy ON TOP of the reference, whose actual job is pinning the phase relationship. Scale 0.30 made the reference the entire gait: over-constrained and over-driven. The correction went to 0.15, deliberately not Pi's 0.08: "一次只走一半, 留退路" (walk half the distance, keep a retreat).
Change
target_joint_pos_scale 0.30 -> 0.15 as one of v6-minimal's three changes, treating both the footfall force and the lateral kicking (yaw momentum scales with leg swing amplitude).
Outcome
v6 improved landing force 1.72x -> 1.55x, suspended tilt 45.9 -> 23.0 deg, turn-gain asymmetry 70% -> 19%; the later v6-halved-shaping experiment (35 mm -> 4 mm collapse) confirmed the reference still carries the gait's existence on this machine - the division of labor is real but machine-specific.
Mechanism
A joint-space reference plays two separable roles: encoding structure (phase relations that keep the foot flat) and injecting amplitude (energy). Structure transfers across robots and is checkable by FK against an invariant; amplitude is a negotiation with the policy, and over-assigning it to the reference removes the policy's freedom to modulate lift with state.
Applies when
- importing a reference gait / imitation target from another codebase
- reference amplitude reasoning based on leg length alone
- real swing amplitude far exceeds sim's under a strong reference
“FK 没错, 但前提错了。我默认抬脚必须由参考轨迹产生。HighTorque Pi 同尺度机器人 … 用 0.08, 而它 target_feet_height = 0.02 m —— 说明抬脚是策略在参考之上加出来的, 参考只负责钉住髋/膝/踝的相位配合。我们取 0.30 等于让参考本身就是整个步态, 过约束 + 过驱动”
train/WALK_V6_MINIMAL.md § ① target_joint_pos_scale 0.30 → 0.15 Ungated phase shaping made standing 42x more expensive than stepping - and the stepping was cooking the hip motors
moving-gate-42x-stand-taxGate every phase/clock-driven shaping term on the command that justifies motion, price the cmd=0 case explicitly during design - and when a reward flaw is sim-only, book it with trigger conditions instead of operating immediately on a working lineage.
Symptom
At cmd = 0 the sim policy never stood still - it stepped in place and crept 0.98 m per 20 s; on the real robot the same lineage's stepping made hip_roll motors run 20 degC hotter than every other joint (43-48 degC vs 25-28).
Context
The arithmetic closed it: the three phase-shaping terms (joint_pos_ref 1.6, feet_contact_number 1.2, feet_clearance_swing 1.6) are driven by the gait clock with NO command gating, so standing at cmd=0 forfeits 3.32/step of shaping while honest standing earns only 0.078 of tracking - stepping wins 42x. The heat chain: perpetual stepping = perpetual single support = one hip_roll stalled at ~4.3 N*m (25% of torque limit) carrying the torso's frontal-plane moment - two hip_rolls = 90% of whole-machine steady-state I2R; measured stand-vs-step comparison: total heat -71% when actually standing. The suspended test acquitted the actuator (0.21 rad sag -> 0.0008 rad in air) and mechanics vetoed the easy fix ("降 kp 救不了热" - equilibrium torque equals the external load regardless of kp). The fix (moving_gate: hard-gate the three shaping terms on |cmd| > eps) was designed - then DEFERRED by the user because the real robot at the time stood fine: "真机不表现该问题, 为真机不存在的病改奖励表不划算", with written trigger conditions (C-ladder stand row persistently failing, or real robot starting to step/drift at cmd=0) and the known hazard tag (this is exactly the reward-change class that triggers the B-arm signature). When the real robot later DID step and cook, the booked trigger fired and moving_gate moved from debt to to-do with its benefit re-priced: "停止空烧 hip_roll,稳态发热降 ~71%".
Change
moving_gate designed with the gate_by_cmd convention; deferral, triggers, and expected heat recovery all pre-registered instead of patching the reward for a then-sim-only symptom.
Outcome
The cmd=0 stepping went from mystery to closed arithmetic; the thermal measurement (hip_roll +20 degC) quantitatively confirmed the 90%-of-heat prediction; the reward change waited for real-world justification instead of spending a risky revision early.
Mechanism
Clock-driven shaping terms define a perpetual-motion bounty unless gated by command; the resulting idle gait is not a training bug but the table's optimum. Its cost surfaces on hardware as stall-torque heating set by statics (mass x lateral offset), which no gain change can remove - only removing the motion (gating) or widening the stance can.
Applies when
- the policy steps in place or creeps at zero command
- specific joints run hot in idle behaviors
- deciding when a known reward flaw justifies a risky mid-lineage fix
“塑形合计 −3.32/步 … 净: 站定亏 42 倍 … 两颗 hip_roll 4.29 / 4.09 N·m(各占限扭 25%),占全机稳态 I²R 的 90% … 吊挂实测 hip_roll 跟踪误差 0.21 rad → 0.0008 rad … 降 kp 救不了热 … 真机不表现该问题, 为真机不存在的病改奖励表不划算”
train/README.md § C1 FAIL 节 (cmd=0 的 sim/真机分歧记账) / C2 真机 A/B 三b 发热定性 Fix the task first, harden the plant second - DR budget spent on a dying task is wasted
task-shaping-before-plant-hardeningFreeze the task/command distribution before spending DR budget on plant robustness; if the task will still change, schedule plant hardening as a final pass and book the interim robustness gap explicitly.
Symptom
Tempting default ordering was to keep the plant-hardened (S2) lineage and teach it new commands; but the S2 plant adaptation had been earned on the straight-walk task, and the new omni tasks (sidewalk, in-place turn) use completely different contact patterns.
Context
The team had direct evidence that DR robustness is a budget that gets reallocated when the data distribution changes ("push/μ 两轮已实证 DR 预算有限且会被重分配") - robustness trained under one task/command distribution does not persist when training continues under another.
Change
Ladder order set to: first C (task shaping - add command modes until the task family is final), then a second S2 pass (plant hardening) on the C product. The plant-robustness gap this creates mid-ladder is accepted and booked explicitly ("此处不欠账" - the debt is assigned to the second S2 pass, not denied).
Outcome
The first S2 pass was not wasted: its laws (kd bandwidth <-> low mu, push need not be trained, ground mu need not be trained, bistability) let the second pass drop from five rungs to three. The C ladder itself ran on the softer plant band without incident.
Mechanism
DR robustness is carried by the policy's visited-state distribution; changing the task changes that distribution, so robustness bought under the old task partially dissolves. Hardening before the task is final means paying for robustness on states that will no longer be visited - "给一个即将不存在的任务花预算" (spending budget on a soon-to-not-exist task).
Applies when
- deciding ordering between skill/command expansion and DR hardening
- a hardened lineage is proposed as the root for a task change
- robustness regressions appear after adding new command modes
“S2 的 plant 适应是为直行步态调的，C4 侧走/C3 原地转是完全不同的接触模式，先硬化再改任务 = 给一个即将不存在的任务花预算（push/μ 两轮已实证 DR 预算有限且会被重分配）。故顺序改为 先 C（任务定型）→ 再 S2（plant 硬化）。”
train/C_LADDER_RUN.md § 0. 决策逻辑 = 短板可不可恢复 (末段) When hardware underperforms, audit deployment knobs before prescribing retraining
deploy-knob-attribution-before-retrainingBefore any "retrain it" decision, reproduce the symptom in sim under the exact deployment configuration; if the symptom follows the deployment knob rather than the checkpoint, fix the knob or randomize it in training - never top-up-train the skill.
Symptom
Real-robot feedback after the C4 deployment - "turning is weak" - with two retraining options on the table: top up turn training, or restart from the s1e root.
Context
The sim account showed the policy turned well (75-81% at pw1.0); the robot was deployed at power-scale 0.8. The 3-6 pp difference between C2 and C4 policies at the same power was noise; the 40-50 pp difference between power levels was the entire effect. Both proposed retraining paths would have burned budget on a non-existent training gap, and restarting from s1e would additionally have discarded the sidewalk skill that took four rungs and a coordinate-bug hunt to obtain.
Change
Decision: retrain nothing. (1) Try pw1.0 on hardware first - sim says net gain; (2) only if 1.0 is unacceptable (heat/feel), the correct training fix is power/torque randomization in the S2 plant line (one variable, fixes turn and backward together) - not skill top-up; (3) restart-from-root explicitly ranked worst.
Outcome
The "weakness" was fully explained by the deployment knob; the sim/real signatures matched the earlier power-derating law verbatim ("与 C2 时代 power 衰减主要伤非前进轴 逐字吻合").
Mechanism
The policy's competence is defined under its training plant; deployment knobs (power scale, teleop mapping, command bands) silently define a different plant. Attributing a deploy-plant effect to a training gap produces exactly the wrong fix - more training on the wrong variable.
Applies when
- real robot underperforms a skill that sim says is fine
- proposals on the table include retraining or re-rooting
- deployment uses any override the trainer never saw (power scale, remapped commands, different control rate)
“正确的训练修法不是补训转向，而是训练时加 power/力矩随机化让策略在 0.8 下自己补偿 —— 单变量，属 S2 plant 线，一次同时修好转向与后退；从 s1e 重训是最差选项：丢掉四轮 + 一个指标 bug 才换来的侧走，而 C2 的转向本来就没问题。”
train/C_LADDER_RUN.md § 3p. 三 处置顺序（回答「补训转向 还是 回 s1e 重训」：都不该） The action-delay was implemented as lerp - beyond one step it extrapolated BACKWARD, so a whole lineage trained on a fictitious actuator
latency-lerp-reverse-extrapolationUnit-test plant-model code (delays, filters, randomizers) against hand-computed truth across its FULL configured range, not just the nominal case - a delay must be a queue, and any interpolation used outside [0,1] is a silent plant corruption that training will faithfully absorb.
Symptom
Every walk/stand model up to v11 had been trained on a silently wrong plant: the action-latency implementation lerp(cur, prev, lag) is only an interpolation for lag <= 1 - at lag 3 it computes 3*prev - 2*cur, a REVERSE extrapolation. With the configured (0, 0.06) s at 50 Hz (lag in [0,3]), about 2/3 of environments were adapting to actuator dynamics that do not exist.
Context
Listed as evidence item #1 for the full restart: "全部旧模型训在错误 plant 上" and the head suspect for the real robot's wild kicking. The fix replaced it with a true FIFO delay line (commit 7f13793) plus its own regression test (tests/test_action_latency.py) - but every exported ONNX predated the fix, which is part of why the lineage was frozen rather than patched.
Change
Delay implementation rewritten as an honest FIFO with unit tests; the restart baseline trained on the corrected plant from day one.
Outcome
A generation-scale training investment was revealed to have a corrupt plant underneath; the class of bug (plausible-looking math that silently changes meaning outside its valid range) got a permanent test.
Mechanism
lerp(a, b, w) leaves the segment for w > 1; used as a delay it fabricates high-gain inverted dynamics precisely in the largest-delay draws, so the policy learns compensation for an actuator that cannot exist - and DR then trains robustness to the artifact rather than to reality. No training metric can catch this: the sim is self-consistent, just wrong.
Applies when
- implementing or auditing action delay / filtering in a trainer
- a lineage behaves as if compensating dynamics nobody modeled
- deciding whether old checkpoints are salvageable after a plant bug
“动作延迟旧实现 lerp(cur, prev, lag) 在 lag>1 时是反向外插(w=3 → 3·prev−2·cur),配置 [0,0.06]s@50Hz 即 lag∈[0,3],约 2/3 env 在适应不存在的执行器动态。7f13793 已换真 FIFO,但所有 ONNX 均训于修复之前 —— 真机"乱踢"的头号嫌疑。”
train/OMNI_V0_SPEC.md § 0. 为什么从零 (1) A curriculum ramp keyed to the process step counter re-fires on every resume - and shipped policies never saw the penalty
curriculum-counter-lineage-stepsKey every curriculum/ramp schedule to lineage-cumulative progress, not per-process counters; and audit where your shipped checkpoints sit relative to every ramp - a penalty that no product ever experienced is not part of your training.
Symptom
vx+0.30 died at a fixed relative time in every resumed run: resume at 500 -> slide at 1100, zero at 1300; resume at 700 -> slide at 1300, zero at 1500 - absolute depths offset by exactly the resume offset, relative timetable identical.
Context
ramp_reward_weight (the saturation penalty ramp) read env.common_step_counter, which restarts at 0 for every run including --resume. So start_step=600 meant "600 iters after THIS resume", not "lineage iteration 600". The A/B arm pair was the clean proof: their env.yaml differed only in log_dir, only resume point distinguished them, and the omni CurriculumManager had exactly one active term - nothing else could produce that timetable. Second consequence: every shipped checkpoint (s1e-500 at +500, C2-700 at +200, A800 at +100) was selected before its run's +600, so the saturation penalty weight was 0.000 for every product ever shipped - explaining saturation 33% and raw |action| 1.9 against clip 1.0 (hip_roll in bang-bang), i.e. half the heat budget.
Change
Two independent recommendations recorded: (1) make the ramp count lineage steps (add the checkpoint's iteration offset on resume) or pin terminal weights in downstream rungs instead of ramping; (2) give the saturation penalty its own rung - never mixed into a skill-learning rung (that would be two variables again).
Outcome
Explained the recurring +600 death of the highest-amplitude command and the persistent actuator saturation of all shipped products with one root cause; honest caveat booked (at +800 the weight is only -0.086, small, but vx+0.30 is the command demanding the largest action amplitude, so it is squeezed first).
Mechanism
Resumable training splits "the lineage" from "the process"; any schedule keyed to process-local counters silently re-applies its transient to every descendant run, and any product-selection habit that picks checkpoints early systematically samples the pre-ramp regime - the curriculum exists in the config but never in any shipped policy.
Applies when
- resumed/forked training with any scheduled reward or DR ramp
- a metric dies at a fixed offset after each resume
- shipped policies show behavior a late-schedule penalty should prevent
“ramp_reward_weight 读的是 env.common_step_counter，它每个 run 从 0 开始，--resume 也不例外。… 原始 run / 臂B | 500 | 1100 = +600 | 1300 = +800；臂A | 700 | 1300 = +600 | 1500 = +800 … 所有出品其实从没见过饱和罚。… 这解释了 sat_max_pct 33%、raw |a| 最大 1.9（clip 是 1.0）—— hip_roll 一直在 bang-bang，而罚它的那一项权重恒 0。热账的一半在这里。”
train/C_LADDER_RUN.md § 3g. 系统性问题：saturation_ramp 每次 resume 归零 Four in-lineage attempts to widen the standing stance failed - remove a tax, add a joint-space knife, change the target, add a task-space metric penalty - because the stance was the end state of the get-up path; trained from scratch with the right terms it grew right from day one
stance-decided-by-get-up-pathA posture a skill ends in is shaped by the path the policy takes to reach it; if several single-variable edits to the terminal-phase reward cannot move it, stop editing that phase and retrain with the terminal constraint present from the start.
Symptom
v2_6c stood with its feet 0.159 m apart (task-space) and its hips yawed 45-47 deg the same way, which split on the real robot. Standing-phase reward edits did not move it.
Context
V2.7-A removed the flat-feet tax on compensated stances (stance unchanged); V2.7b added a hip-roll lower-bound hinge (+5 deg in 3,000 iterations, yaw ratchet); V2.8 changed the stand_pose target to a wide flat stance (stance unchanged, yaw not unwound, feet nearly overlapping, mu 0.4 transfer 2%); V2.9 penalized lateral spacing in metres (the policy parked just outside the penalty's gate in a lunge, 0% success). The v2_6c get-up goes through a split and closes the feet together as it rises.
Change
In-lineage stance surgery was formally closed. V3.1 trained from scratch with task-space stance terms present from the first iteration (and, after P1, a positive width band instead of a penalty).
Outcome
V3.1 P1b: lateral stance 0.364 m, foot tilt 0.0 deg, all four categories 100%, MuJoCo mu 1.0 and 0.4 both 100% - with a symmetric toe-out the kinematic audit had not enumerated. P1c (with a yaw guard): 0.355 m, all six acceptance criteria passing, mu 1.0-0.4 all 100%; it became the product.
Mechanism
A converged policy does not rebuild the path that produced its terminal posture; a standing-phase gradient only finds the nearest hack around the posture the get-up delivers.
Applies when
- the final posture of a transition skill is wrong and resists terminal-phase shaping
- repeated continuation rungs produce hacks instead of the intended posture
- deciding between another in-lineage fix and a from-scratch retrain
“窄站距 + yaw 扭是 v2_6c 起身策略(劈叉起身 → 双脚并拢收势)的**结构性 终态**,不是站立段的孤立参数 —— 站立形态由起身路径决定,在血统内只动 站立段奖励改不动它。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §44 结果:V2.8 判 FAIL —— 血统内站姿手术第三次证伪 Reward fixes come in causal chains - foot height, then landing impact, then foot spacing
reward-chain-foot-height-landing-spacingPlan reward shaping as a chain, not a point fix: when you patch a degenerate gait behavior, pre-register which adjacent behavior the optimizer will exploit next and watch for it.
Symptom
Three problems appeared strictly in sequence: (1) swing feet lifted too low; (2) after fixing that, feet slammed down - "实际比视频里暴力得多" (far more violent in person than on video); (3) after fixing that, feet drifted too close together and collided.
Context
Each reward fix removed one degenerate optimum and exposed the next. The fix for foot spacing (COM lateral randomization +/-5 cm to force leg spread) itself caused base side-to-side sway, requiring a further foot-to-centerline distance penalty. Lucen had just solved its own foot-height problem (19mm -> 40mm swing height) and logged landing impact and foot spacing as the predicted next two problems.
Change
Chain of additions - (1) penalty when swing foot below 5 cm; (2) landing vertical-velocity penalty at touchdown; (3) COM lateral randomization +/-5 cm, then foot-centerline distance penalty to cancel the induced sway.
Outcome
Reference robot progressed through each stage; each individual fix worked and predictably surfaced the successor problem. For Lucen the chain served as a pre-registered roadmap of what breaks next.
Mechanism
Locomotion rewards are coupled through contact dynamics: raising swing height adds potential energy that must go somewhere at touchdown (impact); penalizing impact and forcing robustness to COM shifts changes lateral support strategy (spacing/sway). The optimizer always exploits the cheapest unpenalized channel, so fixing one channel routes the exploit to its neighbor.
Applies when
- adding a foot-height / clearance reward
- feet slam or landing impact grows after a clearance fix
- feet converge toward the centerline or self-collide
- any single-reward fix to a coupled gait behavior
“抬脚太低 → 加惩罚：摆动足低于 5 cm 就扣分 / 加完之后砸脚 → 抬起来了但落地极猛，"实际比视频里暴力得多" → 加落地速度惩罚 … / 两脚太近甚至互撞 → 先试质心横向随机化 ±5 cm … 有效但引发新问题——基座开始左右摇摆 → 再加足-中心线距离惩罚 … 这三条是串联的：每个修复都会暴露下一个问题。”
Experience.md § 三个问题的解法链 (lines 72-77) The smoke watcher panicked at the wrong operating point and its score goes blind when gates saturate - treat it as a survival sentinel, not a judge
smoke-watcher-operating-pointConfigure every automated evaluator at the lineage's declared deployment operating point, give it graded metrics that cannot saturate, and until then scope its authority to catastrophe-detection - never let a mis-configured watcher stop or rank a rung on its own.
Symptom
Two watcher misfires in one ladder: (1) during the friction rung the watcher (evaluating at kd 1.0) reported panic-level 1/3 survival from iter 3300 - falsified by the official kd 1.2 scan, because the lineage's design operating point was kd 1.2 and the watcher lacked the --kd-scale passthrough; (2) during the PD rung the watcher's early-stop score froze at iter 1050 despite ongoing drift improvements, because with all eight gates passing (constant 0/3 failures) the score has no gradient left - "八门全过恒 0/3 时 score 对漂移改善盲, s1f 课文三现".
Context
Both are the same category: the in-training smoke loop is an instrument with its own configuration (operating point, score design), and its verdicts are only as aligned as that configuration. The booked doctrine: "冒烟只当存活哨兵" - until the watcher evaluates at the deployment operating point with graded metrics, its role is detecting catastrophes, not ranking checkpoints; ranking belongs to the full battery at the design operating point (and the watcher's scoring was separately patched to weight survival 3x so recoveries during hard phases are not early-stopped away).
Change
Watcher debt booked (--kd-scale passthrough); score saturation acknowledged with graded columns planned; selection authority kept with 20-seed batteries at the declared operating point.
Outcome
A false panic did not abort a rung that was actually passing at its design point; a frozen score did not hide real drift gains; the instrument's authority was scoped to what its configuration can actually see.
Mechanism
An evaluator is itself configured (gain profile, delay, metrics); evaluating a policy away from its design operating point measures a counterfactual robot, and bounded scores saturate once binary gates pass, losing all sensitivity. Instruments need the same operating-point discipline as deployments and graded outputs to retain gradient.
Applies when
- an automated smoke loop contradicts the official battery
- early-stop scores freeze while graded metrics still improve
- lineages with non-default deployment gain/delay profiles
“watcher (kd1.0 口径) 3300 起 1/3 恐慌被 kd1.2 正式扫描证伪为考纲外假象 —— 工作点评测口径教训: watch_ckpt 缺 --kd-scale 透传 (待补), 冒烟只当存活哨兵。… watcher score 饱和误停 @1050(八门全过恒 0/3 时 score 对漂移改善盲, s1f 课文三现)”
train/README.md § omni_s2e_fric (watcher 恐慌被证伪) / omni_s2e_pd (500 臂) Close a question with an audit, then freeze the wording - later symptoms may not reopen it without new hard evidence
frozen-verdicts-semantic-boundariesWhen an audit closes a hardware-vs-policy question, record the closing evidence, freeze a citable wording for future recurrences, and set the reopening bar explicitly; separate robustness perturbations from plant-truth questions so a DR rung's failure can never silently reopen a closed measurement.
Symptom
Recurring directional bias on the robot kept re-suggesting "maybe the hardware/COM/mechanics are asymmetric", threatening to re-litigate questions that audits had already closed - burning attention each time a descendant policy leaned or drifted.
Context
Two boundary decisions were written as permanent: (1) semantic separation - "S2④ COM ±20mm = 纯鲁棒性扰动,不再承担「解释真机后仰」任务" - if the COM-DR rung degrades, the ONLY allowed conclusion is "policy insufficiently robust to COM uncertainty"; reopening "is the CAD COM wrong" is forbidden because the mass audit was completed and closed (@63f9212). (2) a frozen wording for chirality, to be quoted verbatim whenever left/right bias appears in later rungs: observed directional bias = policy-level spontaneous symmetry breaking; plant asymmetry = no supporting evidence after the mass + model symmetry audit; mitigation candidate pi_sym queued, not blocking. The evidential basis was quantitative: the root policy was perfectly symmetric under +/-6 N*s pushes (40/40) while descendants broke (17/40, 13/40) - "手性是 S2 训练中获得的, 根没有; 机械侧已双 PASS 关案, 不重开".
Change
Closed questions carry (a) the audit commit that closed them, (b) a frozen citable wording for recurrences, and (c) an explicit evidence bar for reopening ("无新硬证据不得重开").
Outcome
Later chirality observations (C2's 15 pp turn gap, hip_roll drift bias) were handled as policy-lineage properties with policy-side mitigations, without a single hardware re-audit cycle.
Mechanism
Symptom classes recur under different guises; without a frozen verdict each recurrence re-runs the same expensive investigation and risks a different (worse-informed) conclusion. Freezing verdict plus wording converts recurring symptoms into citations, while the evidence bar keeps the closure honest rather than dogmatic - the root/descendant symmetry comparison is what makes "it's the training, not the machine" checkable at any time.
Applies when
- a recurring symptom keeps suggesting an already-audited hardware cause
- writing conclusions for a completed calibration/audit
- a DR rung's degradation invites re-measuring the plant
“若 S2④ 退化,结论只能是「当前 policy 对 COM 不确定性不够鲁棒」,不得重开「CAD COM 是不是错了」… 手性冻结表述 … Plant asymmetry: no supporting evidence after mass + model symmetry audit … 无新硬证据不得重开机械不对称”
train/OMNI_V0_SPEC.md § 4. 语义分界与手性冻结表述(2026-08-07 用户定,永久) Brief the operator on the lineage's measured zero-command and untrained-axis behavior before handing over the joystick
know-zero-command-behaviorBefore any teleop/demo, measure and write down the policy's zero-command behavior and per-axis competence, label untrained axes explicitly as not-bugs, and set the floor/procedure to accommodate the known drift.
Symptom
A teleop session was about to start on a policy that does not stand still at zero command and has never been trained on lateral commands - behaviors an unbriefed operator would report as bugs or emergencies.
Context
Three measured facts were written into the teleop instructions ("都有 实测依据, 不是猜"): (1) A/D (lateral) keys will get essentially no response - probe-measured sidewalk tracking ~3%, an untrained axis: "这正是 C4 要解决的事, 不是 bug"; (2) no keypress = cmd 0, and this lineage does not stand still at zero command - a three-generation lineage property: paces in place, drifts right ~5 cm/s, net rotation -30 deg/20 s; sim survival is 20/20 (it will not fall) but it walks away slowly, so leave floor margin especially on the right; (3) S (backward) WILL respond - probe-measured 20/20 survival, 67% tracking untrained, which is also why this root was chosen for the C ladder. Plus a keybinding dry-run while suspended before touching down.
Change
Operator briefing became part of the deployment artifact: expected response per key, expected idle behavior with magnitudes and directions, and the distinction between untrained (expected, not a bug) and abnormal.
Outcome
The session proceeded with correct interpretations available in advance; the known zero-command wander was handled by floor margin and start-with-command procedure rather than misdiagnosed on the spot.
Mechanism
A learned policy's off-nominal behaviors (idle drift, untrained axes) are lineage properties, stable and measurable in sim beforehand; operator surprise converts known properties into false incident reports and unsafe reactions. A briefing transfers the measured behavior model to the person holding the controller.
Applies when
- handing a learned policy to an operator or demo audience
- the policy idles in a non-stationary way at zero command
- some command axes are untrained in the current lineage
“A/D 基本不会有反应 —— s1e 从未训过非零 vy, 选根探针实测侧走跟踪率 ~3% … 这正是 C4 要解决的事, 不是 bug。… 不按键 = cmd 0, 而 s1e 在零指令下不站定 —— 血统属性, 三代实录: 原地踏步 + 右漂 ~5 cm/s + 净旋 −30°/20s。”
train/REAL_RUN_S2.md § 附: WSAD 遥控 上机前必须知道的三条 Cutting swing amplitude 40% raised yaw-momentum demand 53% - the falsified fix is recorded so nobody walks that road again
amplitude-cut-falsified-yaw-fixTest gait fixes against the quantity the ground must actually supply (torque/force rates vs friction ceilings), not against kinematic proxies; record falsified fixes with their mechanism so the search space shrinks permanently.
Symptom
Support-foot yaw slip stayed at ~223 deg (vs 225 deg) after walk_v6 cut joint swing amplitudes by ~40% (hip_pitch 20.6->10.4 deg, knee 31.3->18.8 deg) - the change built on the theory "smaller swing = less yaw momentum to dump into the ground".
Context
Direct measurement inverted the theory: yaw-momentum amplitude ROSE 16% (+/-0.1000 -> +/-0.1159) and its rate of change rose 53% (1.86 -> 2.84 N*m demanded from the ground), pinned exactly at the foot's supply ceiling (2.8-3.3 N*m at mu 0.6-0.7) - so slip could not drop. The extra demand lives in higher harmonics: v6's crisper foot placement (better clearance 34 mm, lower landing force) shortens the momentum- exchange window, concentrating the same exchange into less time. The verdict was written as a closed road: "下一轮不要再走这个方向". An honest residue was also booked: WHY amplitude down but momentum up 16% remained unresolved, with the named next step (per-rigid-body decomposition of H_z, since per-joint RMS sensitivity ignores phase correlations).
Change
The "reduce amplitude to reduce yaw momentum" lever was removed from the planning space; future yaw-slip work redirected toward the supply side (friction) and momentum-rate mechanics.
Outcome
Slip unchanged (225 -> 223 deg); the falsification and its mechanism became a permanent constraint on the fix search space.
Mechanism
Ground yaw torque demand scales with the rate of change of angular momentum, not its amplitude; kinematic amplitude cuts that also sharpen contact timing can raise dH/dt while lowering range. When demand exceeds the friction-limited supply ceiling, slip is set by the ceiling, so demand-side changes below the ceiling do nothing visible.
Applies when
- attacking foot slip or yaw drift via gait shape changes
- a fix targets an amplitude while the constraint is a rate
- documenting a failed intervention after a version comparison
“walk_v6 | ±0.1159 (+16%) | 2.50 Hz | 2.84 N·m (+53%) … 脚的供给上限 2.8~3.3 N·m(μ 0.6~0.7)—— v6 正好顶在天花板上, 所以滑移一点没降。… 结论: "减小摆动幅度以降低偏航动量"这条被 v6 证伪 —— 砍 39% 幅度, 需求反升 53%。下一轮不要再走这个方向。”
train/WALK_DIAGNOSIS.md § ② 未生效的机理: 减小摆动幅度反而让偏航需求上升 Audit rewards by realized contribution (weight x achieved value) - a weight of 2.0 was really paying 0.04
realized-contribution-auditEvaluate a reward table by each term's realized per-step contribution under the current policy, never by its weight column; if a term's realized value is ~0, escalating its weight is a no-op - change the term's structure instead.
Symptom
Foot dragging persisted through repeated weight escalation: feet_air_time had been raised 0.25 -> 1.0 -> 2.0 across versions with no behavioral change, and the training-side comment even recorded the fact ("几乎没有 单支撑相, 是拖着脚蹭") without the fix changing form.
Context
Computing realized per-term contributions in the trained state exposed the economy: feet_air_time contributed weight 2.0 x achieved 0.019 = 0.038 per step, against tracking's +1.20 - lifting the leg earned 3% of what tracking earned, so dragging was the rational optimum no matter the weight escalation. The same table acquitted the energy penalties (total -0.30 negative vs +1.74 positive) that a naive read of weights (-5.0 orientation!) would have blamed.
Change
Fix redirected from "raise the weight again" to "add a term whose realized contribution changes the optimum": a clearance penalty sized so its realized magnitude (~0.018/foot when dragging) is comparable to feet_air_time's, enough to flip the optimum without drowning tracking.
Outcome
With the term economy corrected (plus posture/range fixes), swing height reached 34 mm and tracking 87% by v6; weight escalation of the old term was abandoned.
Mechanism
A reward weight is only a multiplier on whatever the policy currently achieves on that term; when the achieved value is near zero (behavior absent), escalating the weight multiplies near-zero. Optimizer behavior is governed by realized per-step magnitudes, so audits must be conducted in that currency.
Applies when
- a behavior persists despite repeated weight increases
- auditing whether penalties are "too strong" or rewards "too weak"
- sizing a new reward term against existing ones
“把 feet_air_time 权重从 0.25 → 1.0 → 2.0 一路加,但没有加高度项。量级算下来:feet_air_time 权重 2.0 × 实得 0.019 = 0.038,而跟踪奖励是 1.2。抬腿的边际收益只有跟踪的 3%,拖地当然是最优解。… 正项 +1.74,负项 −0.30。能量惩罚不是瓶颈,抬腿没收益才是。”
train/WALK_DIAGNOSIS.md § 决定性证据(#1) / 各项奖励的实际量级 Low-friction robustness traced to kd DR bandwidth, not friction training - by digging resolved params across 8 lineages, 3840 cells
kd-bandwidth-mu-law-attributionAttribute capability differences by tabulating every lineage's resolved training params and eliminating zero-variance and non-aligned columns first; never let an eval-side override knob serve as the explanation axis, and never write a mechanism into a law before it survives a targeted test.
Symptom
Lineages differed wildly in low-ground-friction survival, and the intuitive explanation - "some trained ground friction, some didn't" - was about to steer the ladder toward a ground-mu training rung.
Context
The attribution ran as a full parameter-vs-result cross: 8 lineages x 4 eval kd levels x 6 mu levels x 20 seeds = 3840 cells, with each lineage's RESOLVED training params dug out and compared item by item. First kill: all 8 lineages had ground mu pinned at (1.0,1.0) - zero variance - so low-mu differences cannot come from friction training at all. The only training parameter aligned with the mu score was kd DR bandwidth: narrow (<=0.24) lineages scored 19.9/19.5/19.5, wide (>=0.40) scored 17.1/15.2/14.6/14.2/12.8 - the two groups completely non-overlapping. Every rival was excluded item by item (kd center no; kp band no; COM small-beneficial non-driving; friction rung a clean double null 19.5->19.5 and 15.2->14.6; iteration count non-monotonic), and the one clean single-variable causal link confirmed it: the s2e-3 kd surgery (0.7,1.3)->(1.08,1.32) moved the score 17.1->19.5. Counter-proof against "each best at its own operating point": the narrow-band lineage evaluated OUT of band (18.2) still beat the wide-band lineage at its own band center (9.2). Two axes were ordered never to be conflated (the first attribution's own error): training kd bandwidth is a parameter axis / lineage property; the eval-side --kd-scale knob is a plant axis (more damping physically helps on slippery floors for ALL policies) - "plant 轴只能当部署缓解,不能当 归因". A tempting mechanism story ("drag vs step attractor") was tested and falsified, and explicitly kept OUT of the law: "机制未定, 不入定律".
Change
The planned ground-mu training rung was recommended closed ("建议 不开") in favor of a kd band-narrowing rung (0.8,1.2)->(0.9,1.1) centered on the deployed value - with a pre-registered risk that the law demands "bandwidth = measured dispersion" and the real robot's kd dispersion was not yet measured; if it exceeds +/-10%, narrowing sacrifices real coverage and the rung must yield.
Outcome
A whole training rung was deleted from the ladder by attribution alone (the second S2 pass dropped mu and push, 5 rungs -> 3); floor material became a deployment-selection input (mu <~0.6 -> deploy the kd1.2 gain profile) rather than a training target.
Mechanism
Cross-lineage performance differences must be attributed over the actual training-parameter table, not over eval knobs or plausible stories: eval knobs act on the plant for every policy (a physical effect), while lineage properties come only from training-time parameters. Zero-variance columns are free eliminations, and one clean single-variable rung is worth more than any correlation.
Applies when
- explaining why lineages differ on a robustness axis
- an eval-side knob (gain scale, power) changes results and invites misattribution
- deciding whether to open a DR rung for an axis never actually varied in training
“8 血统地面 μ 训练带全部钉 (1.0,1.0) 零方差,低 μ 差异与「训没训地面摩擦」无关,是 kd DR 带宽的副产物 … 宽 ≤0.24 → 19.9/19.5/19.5;宽 ≥0.40 → 17.1/15.2/14.6/14.2/12.8, 两组完全不重叠。… 训练 kd 带宽 = 参数轴/血统属性;评测部署 --kd-scale = plant 轴 … plant 轴只能当部署缓解, 不能当归因。… 机制未定, 不入定律。”
train/OMNI_V0_SPEC.md § 4. 地面 μ 鲁棒性 = kd DR 带宽的副产物 (2026-08-08) PPO's Gaussian noise cannot compose phase-locked oscillations - deliver them as feed-forward and let the policy learn the residual
feedforward-for-phase-locked-skillsIf a skill needs a temporally coherent (phase-locked) action component, do not expect step-wise exploration to find it: inject a verified feed-forward and train the policy as a residual stabilizer, keeping the feed-forward inside the deployment contract.
Symptom
Four different reward arrangements (no reference / wrong-sign reference / correct-sign reference / cage released) all failed to elicit sidewalk, while open-loop probes proved the behavior existed and was safe on the same platform with the same policy as base.
Context
Producing lateral velocity requires a phase-locked hip_roll oscillation synchronized to the gait clock. PPO's exploration is per-step, zero-mean, uncorrelated Gaussian noise - it can never compose a sustained phase-locked component, so the behavior is unreachable by exploration regardless of how it is rewarded. The fix changed the delivery channel: target = default + scale*action + lat_ff(cmd_vy, phi). The policy's action becomes a residual on top of the feed-forward, retaining full balance authority (it can even cancel the feed-forward); the feed-forward supplies exactly the component exploration cannot. This mirrors why the sagittal joint_pos_ref worked (it also delivered phase structure), just via a different channel.
Change
Contract-level change, done cleanly: new profile omni_ff (= omni + lat_ff_gain -0.5), existing omni profile bit-identical; feed-forward applied after the action delay stage; missing cmd/phase raises instead of silently dropping; deployment must use the same phi as build_obs (recomputing gives a one-tick phase misalignment).
Outcome
From C2-700, +100 iterations sufficed: product omni_c4_ff800 scored vy +120%/+125% (from +4%/-1%), 260/260 cells at 20/20 survival, zero old-skill regression, left/right gap 5 pp - the entire C4 saga resolved by changing the delivery mechanism, not the reward.
Mechanism
Exploration noise spans only the subspace its correlation structure can express; skills requiring coherent oscillation lie outside the span of i.i.d. per-step noise. Feed-forward moves the required structure into the action pipeline where it needs zero probability mass to appear, reducing the learning problem to stabilizing around a demonstrated behavior - which PPO does well.
Applies when
- a periodic/oscillatory skill trains flat under every reward variant
- open-loop injection of the behavior already works
- considering GRU/curriculum/exploration tricks for a rhythmic skill
“病因不在奖励，在探索形式：产生侧向速度需要相位锁定的 hip_roll 振荡，PPO 的逐步高斯噪声零均值无相关，合不出相位锁定分量。… target = default + scale·a + lat_ff(cmd_vy, φ)。策略动作因此是前馈之上的残差，保留全部平衡权限”
train/C_LADDER_RUN.md § 3j. C4-redo4：唯一变量 = 侧步参考改为前馈注入（契约级） One fixed acceptance matrix for every rung - new skill must PASS while every old skill stays within a regression budget
fixed-acceptance-matrix-per-rungFreeze one acceptance matrix for the whole ladder; every promotion requires the new skill's PASS plus bounded regression on every prior skill, measured against the parent's baseline under the current (bug- fixed) metric code - and include command transitions, not just steady states.
Symptom
Sequential skill training silently trades old skills for new ones (C1 trained away the root's backward ability); without a constant measurement frame, each rung's numbers are incomparable and regressions hide.
Context
The C ladder ran the same 13-cell command matrix at 20 seeds per cell at every rung (stand; vx +0.15/+0.30; vx -0.10/-0.20; vy +/-0.10; wz +/-0.20; two vx&wz combos; two vx&vy combos), with promotion requiring "新技能 PASS 且旧技能不明显退化" - old-skill regression budget <=2/20 against the parent's recorded 20-seed baseline. For the transition-rich final rung, a command-switch block was added (forward->stop, stop->backward, forward->turn, left->right, turn->forward; survival + re-track within 2 s) because "每个 steady command 都会做 ≠ 命令切换不会摔" - steady-state success does not imply switch safety, and the joystick does switches. The C4 product's gate ran 260 cells (13 x 20) all 20/20.
Change
Battery frozen once, reused verbatim per rung; baselines re-measured per parent (and re-measured again after the metric-frame fix, since old baselines were taken with the buggy coordinate reading - "旧基线是坏坐标系的， 不可引用").
Outcome
Regressions were caught at the rung that caused them (C1's backward loss, C2's vx+0.30 decay), and cross-rung comparisons stayed valid for the ladder's whole life.
Mechanism
A constant matrix makes every rung's output a point in the same metric space, so "did we lose anything" is a table diff, not a judgment call; the per-skill regression budget converts previously earned PASSes into standing constraints on all future training.
Applies when
- designing gates for sequential skill addition
- promoting a checkpoint to be the next rung's root
- after any evaluation-code fix (old baselines must be re-measured)
“新技能 PASS 且旧技能不明显退化才晋级。… C5 追加：命令切换验收（steady ≠ transition） forward→stop、stop→backward、forward→turn、left→right、turn→forward，各 20 seed，判存活 + 切换后 2 s 内是否重新跟上。”
train/C_LADDER_RUN.md § 5. 固定验收矩阵（每级跑同一张，每项 20 seed） A joint-velocity penalty meant to slow the get-up cut joint speed 16% and left the get-up time unchanged - the knob never moved the variable, so the idea it was meant to test stayed untested
dof-vel-penalty-is-not-a-pacing-knobBefore reading a result as a test of an idea, check that the knob actually moved the independent variable; velocity regularizers smooth a schedule they do not set, and a schedule driven by per-step task income moves only when that income's time structure does.
Symptom
The get-up took 0.6-0.9 s in Isaac with large torque demand; the user proposed getting up more slowly so less torque would be needed.
Context
The idea had support in the accounts: the acceptance bound is an upper bound of 5 s (5-8x margin), the quasi-static squat path peaks at 25% of the limits, and rolling over needs no momentum. R3.2 raised dof_vel from -1e-3 to -5e-3 as the single variable.
Change
dof_vel -1e-3 -> -5e-3 (child-run from R3.1).
Outcome
Get-up medians moved +0.02-0.04 s (noise); raw joint velocity -16%; torque demand median got worse (hip_pitch 46-48% -> 63-67%) as the new term competed with torque_headroom on the same joints; MuJoCo 98 -> 96%. Verdict FAIL on the knob, not on the idea, and the rung was not adopted. When pace was later attacked through the income's time structure (V2.5/V2.5b), the MuJoCo get-up moved into the 3.5-4.5 s design band.
Mechanism
The pace was set by base_height_progress paying for every step spent high (stand earlier, earn more); a velocity regularizer only smooths motion along the same schedule and does not change when the robot stands up.
Applies when
- trying to make a skill slower or gentler with smoothness penalties
- an experiment's primary metric did not move and a verdict is being written
- two penalties act on the same joints
“**关键判读:`dof_vel` 罚只把关节速度压了 16%,而起身用时一点没变。** 也就是说**这一级根本没有把"慢下来"这个自变量推动起来** —— 所以它**不构成对 用户假说的检验** … 起身节奏由 `base_height_progress` 的逐步计酬决定(早站起来就多 拿),速度正则只在同一条时间轨迹上把动作抹匀,不改变何时站起来。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §25 R3.2(dof_vel −1e-3→−5e-3,慢一点起身) The walk phase machine structurally cannot express flight - rebuild the representation for duty < 0.5, teach flight with a mask tax, never a cliff bounty
phase-machine-structural-limitsWhen a new gait changes the contact pattern's structure, audit whether the phase/mask representation can express it and rebuild the representation if not; teach the new contact pattern with graded mask-mismatch pressure and count it in acceptance with artifact-proof definitions (minimum segment length), never with cliff bounties.
Symptom
Running requires both feet airborne, but the walk-era phase machine switches legs by the sign of sin(phase) - with duty < 0.5 the two swing windows must OVERLAP during flight, which a sign-switching representation cannot express at all.
Context
The run phase machine was re-architected rather than patched: per-leg phases (left = phi, right = phi+0.5 mod 1) with leg_phase < duty defining stance, aligned to the walk sin convention at duty=0.5 so the machines agree where their domains overlap. Flight is taught by the SAME mechanism that once cured foot-dragging, direction reversed: in the two planned flight windows the contact mask is (0,0) and feet_contact_number_duty charges -0.3 per foot still on the ground - a mild ~0.16/step tax, deliberately NOT a cliff: "悬崖式腾空奖励诱发跳跃 hack,v4-clearance 家族老课文". The reference shape (half-sine bump over swing progress) is zero at window boundaries by construction, eliminating the clearing-window that the C4 probe measured to cost 13-19% on non-sinusoidal references. The shape self-check ("零代价选项是什么") was run on three behaviors: standing pays ref everywhere (known cmd=0 stepping risk, booked), walking pays only the flight-window tax, proper running collects full marks.
Change
New rewards.py run section (leg_phase_duty / stance_mask_duty / ref_run / clearance_run / contact_duty) with the walk versions untouched byte-for-byte; flight acceptance metric defined with a segment-length floor (>=40 ms to count) so numeric contact flicker cannot fake flight.
Outcome
Flight became expressible and taught by a calibrated mild pressure; the walk lineage's phase code stayed frozen as its own contract.
Mechanism
A phase representation defines which contact patterns exist in the reward's vocabulary; duty cycling below 0.5 introduces states (double-flight) outside a half-period sign convention's language, so no weight tuning can teach them. And rare desirable events taught by cliff-shaped bounties invite hacks (jumping in place); the graded mask tax prices the planned pattern without creating a jackpot.
Applies when
- extending a walking stack to running/jumping (duty < 0.5)
- a desired contact pattern never appears despite reward increases
- defining flight/contact acceptance metrics
“duty<0.5 时摆动窗 (1−duty)T > T/2,两腿摆动窗在腾空段重叠 —— sin 符号切腿的机制结构上表达不了"双脚同时在空中"。… feet_contact_number_duty 对"还踩着地"持续 −0.3/脚 —— 与 walk 治拖地同一机制,方向相反。不腾空的税 ~0.16/步 … 梯度温和不构成悬崖(悬崖式腾空奖励诱发跳跃 hack,v4-clearance 家族老课文)。”
train/RUN_V0_SPEC.md § 5. 相位机设计 No parameter tuning on the floor - a failing config retries once, then it is out; anomalies go back to sim
no-field-tuning-protocolHardware time is for executing and measuring the pre-registered matrix, never for tuning: failing configs get one retry then elimination, anomalies get recorded and reproduced in sim, and contract-check bypass flags stay unused.
Symptom
Hardware sessions create pressure to fix problems live - nudge a gain, tweak a scale - which destroys attribution and risks the robot.
Context
The anomaly-handling section of the acceptance sheet is three fixed plays: (1) falls at start -> retry once at the same settings; falls again -> that configuration is eliminated, "不现场调参" (no on-site parameter tuning); (2) limit cycle or motor screech -> stop immediately, record the gain level and the joint, reproduce in sim before any discussion; (3) systematic disagreement with sim -> record it as a finding (hardware outranks sim) rather than adjusting anything to force agreement. Related guardrails elsewhere in the sheet: never pass --allow-unstamped / --allow-plant-drift to bypass manifest checks - if it errors, something real is wrong, stop and look.
Change
Field sessions restricted to executing the pre-written matrix; every fix path routed through sim reproduction and the normal config/rung process.
Outcome
Sessions stayed interpretable (each run matched a documented config) and safety overrides never became habit; anomalies arrived back in sim as reproducible cases instead of half-remembered floor stories.
Mechanism
Field-tuned values are measured under adrenaline on one floor with no logging or baselines - they contaminate the config lineage and are unattributable afterwards; and every bypass flag that skips a contract check converts a designed safety property into an operator promise.
Applies when
- a config fails or oscillates during a hardware session
- someone reaches for a live gain tweak or a bypass flag
- writing the anomaly-handling section of a deployment runbook
“起步即摔 → 换档重试一次, 仍摔则该档出局, 不现场调参。出现极限环/啸叫 → 立刻停, 记录档位与关节, 回 sim 复现再议。… 不要给 --allow-unstamped / --allow-plant-drift —— 三枚 ONNX 都已盖章 … 真要报错说明有别的问题, 停下来看。”
train/REAL_RUN_S2.md § 4. 异常处置 Gate a new reward term by its command so all old modes score pointwise identical
gate-new-reward-terms-by-commandWhen a reward term must be added mid-lineage, gate it on the condition that defines the new task so every pre-existing situation scores exactly as before - and still watch for value-rescale pathologies inside the new mode.
Symptom
Adding a lateral tracking reward (track_lin_vel_y_exp) ungated would have paid 0-2.0 per step even in modes with cmd_vy = 0 (healthy gait sway of vy ~0.1 already earns 1.28), shifting the whole reward table by a large bias and rescaling the value function - no longer "just adding one mode".
Context
C4 was the C ladder's only true reward surgery. Single-variable discipline required that the change be invisible to every existing mode. The chosen construction: gate_by_cmd=True - the term pays only when |cmd_vy| > 0.02, so for all modes with cmd_vy == 0 the term is pointwise zero, i.e. the reward is pointwise identical to before the change. The same trick appeared earlier in C1: replacing the vy L2 tax with a command-error version that is "对 cmd_vy≡0 逐点同值" (pointwise equal when cmd_vy is 0), explicitly classified as not-a-reward-change.
Change
track_lin_vel_y_exp added with gate_by_cmd=True (weight +2.0, std 0.15); the residual acknowledged honestly - inside the side bucket the values DO change, so the rung still watched the known reward-reshuffle pathology signature (s1c B-arm: scatter -> half-recover -> collapse) as a stop criterion.
Outcome
Old modes provably unaffected (pointwise-equal argument); attribution for any change in old-skill metrics stayed clean through the C4 redo series.
Mechanism
PPO's critic normalizes to the reward scale it sees; an ungated additive term shifts returns in every state and re-scales advantages globally, entangling the new skill with all old ones. Command-gating confines the new term's support to the new mode's state distribution, making "pointwise identical elsewhere" a provable property rather than a hope.
Applies when
- adding a tracking/shaping term for a new command or skill to a lineage that must not regress
- reward change proposed while other skills are still being gated
- reviewing whether a config diff counts as a reward change
“只在 |cmd_vy| > 0.02 时付。不门控的话它对 cmd_vy≡0 的老模式也给 0~2.0 分（健康摇摆 vy≈0.1 → 1.28），等于给整张奖励表加一个大偏置、值函数尺度全变 … 门控后老模式逐点得 0 = 与加项前逐点同值，单变量纪律成立。… 但 side 桶内的值确实变了 —— 这仍是奖励表改版，开级盯 s1c B 臂签名”
train/C_LADDER_RUN.md § 3d. gate_by_cmd=True（重要） Training at scale 0.4 is NOT the twin of deploying 0.5 at power 0.8 - the algebra matches, the learned policy does not
deploy-scaling-not-training-equivalentNever assume deploy-side scalings can be folded into training-time constants ("burning the crutch into training"): the learned optimum depends on the training-time authority, so treat such conversions as full experiments with pre-registered expectations and a sim2sim gate before any hardware.
Symptom
s1g (S1.6) trained from zero at action_scale 0.4 - meant as the "training twin" of the hardware-proven s1c-at-power-0.8 (0.8 x 0.5 = 0.4) - was all green in Isaac (zero falls, reward 117) yet scored 0/3 across all eight checkpoints and 0/20 at 20 seeds in the MuJoCo gate, falling forward at median 1.57 s with a 2.9x speed overshoot.
Context
The pre-registered expectation (survival gate should pass, since the conviction matrix showed s1c@0.8+delay2 all-survive) was cleanly falsified, and the harness was acquitted by controls: --delay 0 fell identically (not a delay fragility), check_contract all green, and s1c through the same harness survived 2/3. The verdict: "「s1c@0.8 = 0.4 训练孪生」的代数等价不成立" - a policy deployed with a derated output still LIVES in the 0.5 internal model it trained under (its value function, its expectations of its own authority), while a policy that starts training with reduced authority learns a different, clip-hugging gait with zero margin for plant differences ("部署端打折的策略活在 0.5 的内模里,训练起点收权限学出的是贴 clip 的 另一套步态,对 plant 差异零余量"). Result: the policy was withdrawn before hardware ("撤回——不上真机"), the lineage root moved back to the 0.5-contract s1c-5500, and this became the C ladder's cited fact-check ("s1g 是 0/20 证伪出局的那一代").
Change
The amplitude-surgery route abandoned; contract kept at scale 0.5; the deploy-side 0.8 crutch later retired on its own merits when the delay-complete s1e generation ran at full power.
Outcome
One training run bought a clean falsification of a plausible algebraic identity; no hardware time was spent on it because the sim2sim gate caught it.
Mechanism
Output scaling commutes with the network arithmetic but not with learning: the training-time scale shapes which gait solutions are reachable and how much clip headroom the optimum keeps. A derated mature policy retains the wide-authority solution executed softly; a from-zero narrow-authority policy finds a different optimum that saturates its smaller envelope - the two are not the same controller in different units.
Applies when
- proposing to move a deployment derating into a training constant
- a scaled-down contract policy hugs the action clip
- Isaac-green / cross-sim-zero results on a re-scaled lineage
“预注册 a) 证伪——Isaac 全绿(零摔/reward 117)但 MuJoCo --delay 2 八档 checkpoint 扫描全数 0/3、iter6500 20-seed 0/20 … 「s1c@0.8 = 0.4 训练孪生」的代数等价不成立: 部署端打折的策略活在 0.5 的内模里,训练起点收权限学出的是贴 clip 的另一套步态,对 plant 差异零余量。”
train/OMNI_V0_SPEC.md § 3. S1.6 判决(2026-08-07 验收) An exponential kernel on instantaneous velocity punishes gait oscillation - track the cycle average
cycle-average-tracking-for-gait-quantitiesReward velocity tracking on gait-cycle averages (or filtered values), not instantaneous samples, whenever the desired behavior oscillates at stride frequency; widening the kernel does not fix a variance penalty.
Symptom
Even while the robot genuinely sidewalked (verified after the metric fix), the Isaac-side tracking reward sat on the ignore-floor: true sidewalk scored 0.178 vs 0.189 for ignoring the command - the reward was mildly punishing the desired behavior.
Context
Sidewalking is inherently oscillatory: per-frame vy std was 0.177 while the tracking kernel width was sigma = 0.15, applied to the instantaneous value. A kernel-width scan showed widening sigma 0.15 -> 0.50 still loses (-0.14 -> -0.07): "指数核惩罚的是方差，而侧步天生带方差" (the exponential kernel penalizes variance, and side-stepping inherently carries variance). Modeling with measured parameters: replacing instantaneous vy with the mean over one gait cycle (0.5 s) flips the margin decisively (true sidewalk 1.888 vs ignore 1.281, +0.607), half-cycle is neutral (+0.006), two cycles adds nothing more. Explicitly flagged as extrapolation pending Isaac-side implementation. This also vindicated a previously dismissed external note (sigma too small) - right conclusion, different mechanism than claimed (variance, not gradient).
Change
Proposed fix recorded: change the tracked quantity from instantaneous vy to a one-gait-cycle running average; widening sigma alone rejected by the scan.
Outcome
Diagnosis complete and quantified; the C4 product shipped via feed-forward before the reward change was implemented, so the cycle-average fix remained a verified-by-model, not-yet-trained change.
Mechanism
E[exp(-(v-c)^2/sigma^2)] decreases with Var(v) even when E[v] = c exactly; a gait's phase-locked oscillation guarantees variance at the stride frequency, so instantaneous tracking rewards structurally prefer standing still at the command mean. Averaging over exactly one cycle removes stride-frequency variance while preserving command-following error.
Conflicts
The cycle-average fix itself is model-extrapolated ("⚠️ 这一条是外推，须在 Isaac 侧实装并复量后才能当结论") - the diagnosis is measured, the remedy untested in training at the time of writing.
Applies when
- tracking rewards for lateral/turn/any oscillation-carrying velocity
- a verified behavior scores below the ignore-floor
- choosing sigma for exp-kernel tracking terms
“侧走时 vy 的逐帧摆幅 std = 0.177，而 track_lin_vel_y_exp 核宽 σ = 0.15，且作用在瞬时值上 … 真侧走（均值 66%，振荡 ±0.18）0.178 | 完全无视指令 0.189 … 真侧走的得分比无视指令还低。… σ 从 0.15 放到 0.50，侧走仍然吃亏 … 把跟踪目标从瞬时 vy 换成一个步态周期（0.5 s）的平均 vy：… 1.888 vs 1.281”
train/C_LADDER_RUN.md § 3n. 二/三 Isaac 训练奖励为何一直坐在「无视底分」/ 修法不是放宽 σ Every rung gets written stop criteria - hit any one, stop; tightened when priors say results should come fast
preregistered-stop-criteria-per-rungFreeze per-rung stop criteria (old-skill floors, new-skill deadline, oscillation signature, known pathology signatures) before training, stop on first hit - and shorten the deadline in proportion to how fast your mechanism says results should appear.
Symptom
Continued training past the point of degradation had previously destroyed capabilities (C1 trained away the root's backward skill); without hard stop rules, sunk-cost reasoning keeps runs alive too long.
Context
Standard rung protocol - eval_c_matrix every 100 iters at 5 seeds with a fixed criteria list, frozen before training ("开训前写死，事后不许改"): (1) stand or vx+0.15 at <=3/5 for two consecutive points; (2) vx+0.15 tracking <70% for two consecutive points (vs recorded root baseline); (3) oscillation signature - survival repeatedly crossing zero between adjacent checkpoints, stop on first occurrence, do not wait for confirmation; (4) new-skill-no-progress deadline (e.g. wz tracking <30% or still same-signed after iter 400); (5) a known lineage pathology signature (s1c arm-B: scatter -> half-recover -> collapse).
Change
Stop budgets scale with prior knowledge: when C4-redo4's feed-forward was already proven open-loop, the no-progress deadline was tightened from +500 to +100 iters ("前馈是开环就给 71~96% 的 … 若 +100 还没有 … 不值得再烧").
Outcome
Multiple rungs were stopped exactly on criterion (C4-redo criterion 4 at iter 1200; redo2/redo3 at absolute 900), converting each into a clean hypothesis test instead of a drifting run; no rung burned its full cap on a dead hypothesis.
Mechanism
Degradation of retained skills is a lineage-level injury that later training often cannot undo, so detection latency is capital loss; and a stop rule written before the run cannot be bent by hope. Tightening deadlines when priors predict immediate results converts "no result yet" into evidence against the mechanism.
Applies when
- starting any resumed/curriculum training rung
- deciding whether to keep training a run that shows early regression
- a mechanism-backed change should produce results immediately
“每 100 iter eval_c_matrix.py --seeds 5，命中任一即停 … 存活在相邻 checkpoint 间反复跨越 0（出现即停）… 收紧版：绝对 iter 900（= +200）时 vy±0.10 跟踪仍 <30% 即停”
train/C_LADDER_RUN.md § 3h. 预注册停梯判据（开训前写死，事后不许改） A suspended (no-load) test acquits or convicts the actuator before you blame authority
suspended-test-isolates-actuator-authorityBefore attributing a failure to actuator authority, measure no-load tracking error and steady-state torque fraction; blame authority only if the task fails while the error grows with demanded force - and then fix gains or targets, not training.
Symptom
hip_roll sagged 0.21 rad on the ground and saturation questions loomed over the sidewalk plan - was the roll axis physically too weak (authority), or was something else limiting it?
Context
Before C4, the roll-authority question was settled by measurement triage: suspended test (--suspend, feet off ground) showed hip_roll tracking error 0.0008 rad - actuator acquitted; the entire 0.21 rad ground sag is load-induced. Steady-state torque was 25% of limit - 75% margin remains. Since sidewalk needs lateral force, not exact angles, authority was ruled "not a hard limit", with a pre-registered criterion for when it WOULD become one: sidewalk fails to track AND roll error keeps growing - then the fix is raising hip_roll kp or lowering the vy target, not more training.
Change
Hypothesis "roll authority insufficient" demoted from blocker to a monitored branch with an explicit trigger condition; C4 proceeded.
Outcome
Later open-loop probes confirmed the actuator could produce the behavior (sidewalk feed-forward ran at full amplitude, 5/5 survival), and the eventual C4 failure causes were measurement and reward, never authority.
Mechanism
Suspended vs loaded comparison separates the actuator's closed-loop competence from the load path: tiny no-load tracking error means the motor/controller is fine and any loaded deviation is statics (gravity / stiffness budget, kp trading error for force). Torque-fraction measurement then bounds how much force headroom actually remains.
Applies when
- suspecting an axis is "too weak" for a new skill
- large position sag on a loaded joint
- deciding between hardware fix, gain change, and more training
“吊挂（--suspend）实测 hip_roll 跟踪误差 0.0008 rad → 执行器无罪，地面下垂 0.21 rad 全是负载所致；稳态占限扭 25% → 仍有 75% 扭矩余量。… 判据：若 C4 出现「侧走跟不动且 roll 误差继续变大」，那才是权限账 … 解法是提 hip_roll 的 kp 或降 vy 目标，不是硬训。”
train/C_LADDER_RUN.md § 3d. roll 权限：已部分澄清，不是硬上限 Fix a too-deep nominal pose before adding any penalties - the default stance defines the basin training starts in
nominal-posture-before-penaltiesBefore tuning penalties on a degenerate gait, audit the nominal pose and height targets against morphology and published ratios; if the default stance encodes the degenerate behavior, fix it first - and recompute dependent quantities (init height) by FK, not by hand.
Symptom
Policy lived in a crouched shuffle; nominal knee angle was 0.5 rad (28.6 deg) - deeper than published configs (Unitree G1 0.3 rad / 17.2 deg, Booster T1 0.4 rad) - so the policy's starting point and its action-space center both sat inside the crouch basin.
Context
Initially ranked "secondary" in the local diagnosis, this was promoted to co-first priority by the cross-check against published reward tables, which states that with nominal knee flexion above ~0.4 rad, fixing the posture must precede adding any penalties ("改这个之前别加任何 惩罚都是白费"). Companion base-height items: walk profile had weakened base_height_l2 to -5.0 (base class -10, field standard -10 to -20, "the second most common cause of death"), and the height target must be the STANDING height (0.384), not the crouch height.
Change
Nominal knee 0.5 -> 0.3 rad with init_base_height recomputed by MuJoCo FK (0.3739 -> 0.3802); base_height_l2 restored to -10 with standing height target; both bundled as first-priority alongside the clearance term.
Outcome
Part of the v5/v6 package that lifted swing height to 34 mm and tracking to 87%; the crouch basin stopped being the default answer.
Mechanism
The nominal pose is the fixed point every regularizer pulls toward and the point where action=0 lands; if that point is itself the degenerate posture, every penalty fights the geometry. Correcting the attractor is prior to shaping the gradient field around it.
Applies when
- policy converges to a crouched or collapsed posture
- nominal joint angles were chosen for stability rather than gait
- base-height reward targets or weights were locally weakened
“研究明确说"nominal 膝屈超过 ~0.4 rad 必须先改,改这个之前别加任何惩罚"。我们是 0.50,超标。… base_height_l2 在 walk profile 里被减到 −5.0(基类是 −10)。研究说这是"第二常见死因"且应 −10 ~ −20。改回 −10。目标高度用站立高 0.384 是对的(研究要求 target 必须是*站立*高度而非蹲姿)。”
train/WALK_DIAGNOSIS.md § 修正 ①(升级优先级) / 修正 ④ Diagnose a behavior failure by enumerating hypotheses and auditing each against the actual config, cheapest first
hypothesis-table-code-auditBefore changing anything, write the full hypothesis list for the symptom and audit each against the resolved config and measured magnitudes, cheapest check first; train only on the survivors.
Symptom
Real robot leaned forward "wanting to walk" but dragged its feet instead of lifting them - a symptom with many plausible causes and no obvious single fix.
Context
Seven hypotheses were listed and each checked against the actual training config files (velocity_env_cfg.py, isaac_values.py), ordered by check cost: missing foot clearance term (CONFIRMED, primary - feet_air_time existed but no swing-height term at all); energy penalties dominating (REJECTED - energy terms total -0.19 vs tracking +1.2, 16%); command range too narrow (CONFIRMED - (0.15,0.35)); nominal pose too crouched / action scale too small (HALF - knee 0.5 rad = 28.6 deg deep, scale fine); mixed PD across motor types (REJECTED - already grouped); missing base-height reward (REJECTED - present at -5.0); height-drop termination (REJECTED - none exists, which itself became finding #4 of the fix list).
Change
The audit produced a ranked fix list (add clearance penalty; widen speed range; reduce nominal crouch) with each rejected hypothesis documented so it would not be re-litigated.
Outcome
Three confirmed causes fixed over v5/v6: swing height went 22-23 mm -> 34 mm, tracking 81% -> 87%; the rejected hypotheses stayed rejected (no wasted rungs on energy weights or PD grouping).
Mechanism
Multi-cause symptoms invite guess-and-train loops; a written hypothesis table forces each candidate to be confirmed or rejected against actual values (not impressions), and cost-ordering the checks means most hypotheses die for the price of reading a config.
Applies when
- a real or sim behavior failure has multiple plausible causes
- the team is about to "try a fix" without an audit
- post-mortems keep re-proposing already-rejected causes
“真机现象:躯干前倾像要走,脚抬不起来(拖着蹭)。按成本从低到高逐条核查 … | 1 | 缺 foot clearance | ✅ 成立,首要 | 有 feet_air_time,无任何摆动足高度项 | | 2 | 能量惩罚压过跟踪 | ❌ 不成立 | 能量类合计 −0.19,跟踪 +1.2,只占 16% |”
train/WALK_DIAGNOSIS.md § walk 拖地问题 — 七条假设的代码核查结果 A training-side rate limit anchored on the last commanded target is an integrator inside the balance loop - two unrelated lineages converged to the same 34-43% re-fall rate, a soft penalty could not fix it, and the bandwidth arithmetic said safety and standing could not coexist
slew-anchor-is-an-integratorIf you constrain actions in training, anchor the constraint on the measured state, not on the previous command - a limiter with memory adds lag inside the balance loop; and when two different lineages converge to the same failure rate, treat the cause as structural and stop adding soft penalties.
Symptom
With the rate limit moved into training (V1), policies either could not stand up or stood up and kept falling again: the stand oscillated, fell and climbed back, 34-43% of the time.
Context
V1.0-B (user decision: explore new postures from scratch, hard constraint in training): target <- prev + clip(target - prev, +/-S*dt) at the TIGHT rates, anchored on the last issued target like the bridge. Four runs: v1_0 from scratch 0.8% - every category righted under the limit, then knelt (the limit also damped the exploration that had escaped the seated basin in V0); v1_0c continued from R3.1 99.8% get-up but 36-43% re-fall and knee jitter 0.604 rad/s; v1_0p with a pull-assist curriculum (56 N -> 0, fully withdrawn) 39.1% unassisted, re-fall 34-42%; v1_0w with a windup-gap penalty 25.4%, re-fall 18-43%. Removing the limiter from v1_0p gave 0.0%: the policy had co-adapted with it.
Change
The rate-limit route was declared dead after four runs and the line was re-rooted on a beta-anchored action space (V2, user approval required).
Outcome
V2.0's first acceptance at full authority already showed re-falls of 0-1% (V1: 34-43%), the structural bet paying off before any tuning.
Mechanism
Anchored on the previous command, a saturated policy becomes a rate controller - one more integrator in the loop - and active balance through that lag oscillates, while a kneeling sit needs no active control and is stable. The arithmetic: kp 30 needs 0.4 rad of error for 12 N*m; at 4 rad/s that takes 0.1 s, half the pendulum time constant sqrt(0.38/9.8) ~ 0.2 s; keeping standing bandwidth needs S of at least ~8 rad/s, within 20% of the 10 rad/s velocity limit - no bound at all. Anchoring on the measured angle (q + beta*a) makes the full kp*beta authority available in one step, with no memory, and caps the impact at the same time.
Applies when
- adding rate limits, slew limits or target filters to a policy's action path
- a policy stands but oscillates and re-falls after a constraint was added
- different lineages or curricula land on the same failure signature
“v1_0p(拉力课程):会站(prone 79.9%),再摔 34~42% —— **两条完全不同 血统、不同学习路径,收敛到同一失败率**。 … 动作饱和时它退化为 速率控制 = 环内多一个积分器;主动站姿平衡穿过该滞后必振荡(v1_0 的跪坐不需 主动控制,所以稳)。对照:**HoST 的 β 锚在当前实测 q,无记忆、无积分器**”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §31 结构病定案:slew 的目标锚 = 控制环里的积分器 Four consecutive fixes were each continued from the previous fix's degraded state until the user stopped the ladder - "change parameters, don't stack errors" - rolled back to the last good checkpoint and audited the target geometry first
stop-stacking-roll-back-and-auditWhen successive rungs each start from the previous rung's output and the target symptom does not move, stop, roll back to the last good checkpoint and re-derive the next change from an audit; keep the measurements, discard the stacked remedies.
Symptom
After the real-robot splits, the V2.7 ladder tried to widen the stance: a term swap (A), a new stance knife (b), more iterations (甲), a doubled weight (乙). Stance barely moved while hip yaw ratcheted 46.7 -> 49.9 -> 52.5 deg toward its 60 deg limit.
Context
Each rung started from the previous rung's output. The user ruled on 2026-08-11 that things had gone wrong from V2.7-A: go back to v2_6 and rethink which parameters to change instead of stacking errors.
Change
乙 was killed at start and not counted; the product baseline rolled back to v2_6c model_29399; every measurement and law learned on the ladder was kept ("the data is real; what stacked was the treatment"). Before any new training, a zero-training kinematic audit of the stance targets was run.
Outcome
The audit found the stand_pose target itself rewarding the narrow stance (pose-target-geometric-audit) and showed geometrically why the yawed stance could not be widened with flat feet - so 乙 was proven unnecessary without running it. The next in-lineage attempts still failed, which is what established that the stance is set by the get-up path.
Mechanism
A rung continued from a degraded state inherits its compensations, so each new fix answers the previous fix's side effects; the yaw ratchet was the visible trace of that stacking.
Applies when
- three or more corrective rungs in a row without progress on the target metric
- a side-effect metric ratchets in one direction across rungs
- a new rung is being planned from the latest (not the best) checkpoint
“用户裁:"从 V2.7-A 开始就出问题了,应该回到 2.6 再思考如何改变参数而不是 错误叠加。"认账:A 的补丁 → b 的新刀 → 甲的加时 → 乙的加权,每级都从上级 的**退化状态**续(yaw 46.7→52.5° 的棘轮就是叠加痕迹)。 … 数据是真的,叠加的是处置。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §44 方法论裁定(2026-08-11,用户):V2.7 全阶梯叫停,回滚 v2_6 Size each joint's action authority to its measured working range - lock a channel to zero only when its job is provably elsewhere
per-joint-action-scale-lockdownSet per-joint action scales from measured target ranges and momentum decompositions: full authority for working channels, working-range authority for balance channels, zero for channels whose contribution is measured negligible - and prefer this structural quieting over perpetual reward penalties, keeping the contract dimensions intact.
Symptom
"Walks crooked" - roll and yaw channels wandered; hip_yaw peak-to-peak reached 22.3 deg in v11 while contributing essentially nothing to locomotion; a uniform action scale of 0.5 gave every joint the same authority regardless of its actual job.
Context
The v12 design replaced the scalar action scale with per-joint scales justified by measurements: pitch-class 0.5 (the gait's entire working channel - untouched); hip_yaw 0.0 - lossless because it carries only 1.4% of yaw momentum (v6 decomposition) and straight-line targets use merely +/-0.006-0.03 ("乱动纯属浪费"); roll 0.2 - NOT zero, because lateral balance and weight transfer are roll's unique job (locking it would degenerate into foot-edge rocking, "比现在更歪"), and 0.2 covers the measured working range +/-0.06-0.19 while "0.5 的另一半全是 '歪歪扭扭'的来源". Costs were accepted consciously: turning demoted to an observation row with a fallback (yaw 0 -> 0.1 in v13). Contract preserved: the 12-dim action interface unchanged, yaw values simply neutralized. The structural lockdown also RETIRED the reward-side hip_yaw_quiet penalty - "A 的 yaw=0 结构性取代,不再付奖励塑形成本".
Change
action_scale_joint pitch 0.5 / roll 0.2 / yaw 0.0 wired through robot.yaml -> policy_io (verified: all-ones action gives hip_yaw target exactly 0) -> Isaac action term, guarded by the contract checker ("它就是抓这种双侧不一致的").
Outcome
Designed and verified on the shared side before the lineage freeze; stands as the pattern for authority sizing: structure replaces reward shaping wherever a channel should simply not act.
Mechanism
Action scale is a per-channel authority budget; uniform budgets give noise channels the same voice as working channels, and reward-side quieting then pays a permanent shaping tax for what a zero scale provides for free. But zeroing is only lossless when decomposition proves the channel's contribution negligible AND no unique function (balance) lives there.
Conflicts
Wired and verified on the config/deploy side but never trained - the 2026-08-05 reset suspended v12 before the Isaac-side run.
Applies when
- some joints wander without contributing to the task
- a quieting penalty (deviation/L1) taxes every step forever
- deciding action-space authority for a new task or robot
“yaw=0 是无损的:实测它只贡献 1.4% 偏航动量、直行目标只 ±0.006~0.03,乱动纯属浪费。… roll 不能为 0:横向平衡/重心换脚是它的独有职责,锁死会退化成脚缘摇摆(比现在更歪)。0.2 的依据:各代实测 roll 目标只用 ±0.06~0.19,0.5 的另一半全是"歪歪扭扭"的来源。”
train/WALK_V12_SPEC.md § 3. A —— 逐关节动作幅度(用户"只动 pitch"的安全版) Curriculum-gate a penalty to the phase where its disease occurs - early on it only taxes exploration
gate-penalties-to-the-disease-phaseFor penalties aimed at late-stage pathologies (freezing, saturation, degenerate attractors), ramp the weight in only after exploration noise has decayed; anchor the terminal weight to measured healthy-vs-sick raw values, and shift all related tripwires to after the ramp completes.
Symptom
The action_saturation penalty, applied from iteration 0 in v8a, taxed exploration itself: with init_noise_std 1.2 the sampled actions paid ~-2.45/step before any policy had formed - while the disease it targets (clamp freezing) is a LATE pathology (v9 froze at iteration ~2624).
Context
v10 re-introduced the same penalty behind a curriculum gate: weight 0 until iter 1000, ramping linearly to -1.0 by iter 2000 - present only when the disease can occur, absent while exploration noise dominates. The trust argument was evidence, not hope: in v8a the term, while active, had pulled joint_pos_ref from 0.041 up to 0.155 and climbing - proof it can extract a policy from the frozen pit. Weight magnitudes were anchored to measured raw values (healthy v5 0.310 / v6 0.106 vs frozen v7 1.145 / v9 1.22 per step: at -1.0 healthy pays 6-18% of tracking, frozen pays 60%+, standing ~0). v10c then isolated the gated term as THE anti-freeze mechanism by single variable, upgraded to untouchable status in v11: "S 的门控机制(v10c 单变量铁案:任何情况下 不许撤,只许调终值)" - and v11 dared to relax other penalties only because S stood guard.
Change
action_saturation gated 0 -> -1.0 over iters 1000-2000 (later terminal value tuned -1.0 -> -0.5 with the gate mechanism itself frozen); tripwires adjusted to respect the gate's timing (freeze check moved to iter 2500-3000 to give the ramped term its effect window).
Outcome
Freezing stopped recurring while early training kept full exploration; the mechanism graduated from experiment to invariant within two versions.
Mechanism
A penalty's incidence depends on who occupies its support: early in training that is exploration noise (whose suppression starves learning), late it is the converged pathology. Time-gating aligns the penalty's presence with its target's presence, buying the constraint without the exploration tax - and tripwire timing must then be computed from the gate schedule, not from ungated precedents.
Applies when
- a structural penalty punishes exploration in early training
- a late-onset pathology (freeze/saturation) needs a standing guard
- deciding when a curriculum ramp should engage
“v8a 实锤它的病根是"罚在采样动作上"——init_noise_std 1.2 的早期等于罚探索(~−2.45/步);而冻结是晚期病(v9 速率 2624 才死平)… 门控让它只在病发期在场。… v8a 里它在场时 joint_pos_ref 从 0.041 爬到 0.155 且仍在升——有从低谷爬出的实证。”
train/WALK_V10_SPEC.md § 2. S 保险 —— action_saturation 课程门控 The deploy-side walk/recovery switch - into recovery at tilt > 65 deg held 0.3 s, back at tilt < 15 deg with angular rate < 1 rad/s and straight knees held 1 s, a 15 s timeout, last action cleared both ways - and the handoff steps the design required are only partly implemented
walk-recovery-fsm-handoffSpecify a deploy-time controller switch as hysteretic, time-filtered predicates the robot can measure (proxy what it cannot, e.g. straight knees for height), a timeout that ends in a safe stop, and a complete handoff (history, clock, last action, command ramp) - then test that the code performs every handoff step, because the design document is not the implementation.
Symptom
With a recovery policy and a locomotion policy as separate networks, the robot needs a switch: when is it "fallen", when is it "up", and what state must be reset so the next policy does not act on the previous one's history.
Context
The 08-09 design: enter recovery when fallen (tilt > 55 deg or height < 0.60 x 0.384 m) for 150 ms, leave for a stand-hold when upright (tilt < 12 deg, height > 0.85 x 0.384 m, feet steady, |omega| < 0.8) for 400 ms - wide entry, strict exit, hysteresis - then a mandatory handoff trio before walking resumes (reset the walking policy's observation history, restart its phase clock at 0, clear its previous action and latency buffer) and a command ramp instead of a jump. The 08-14 implementation in deploy_policy (--recovery-policy): each policy under its own manifest contract (walk: nominal + scale; recovery: beta-anchored), the same rl_default gains, the tilt cutoff disabled; RECOVERY at tilt > 65 deg for 0.3 s; LOCO again at tilt < 15 deg and |omega| < 1 and knees straight (< 0.35 rad) for 1 s - the robot's computer has no height estimate, and straight knees stand in for height so a V3.0-style upright kneel cannot pass as standing; RECOVERY longer than 15 s ends in a safe stop; last_action cleared on both switches; command forced to 0 during RECOVERY; power scaling applies to LOCO only.
Change
An open account was written down with it: the recovery end state (0.355 m stance, hip yaw -/+27 deg) is outside the walking policy's training start distribution, so the first test must use stand / zero command as LOCO, and the long-term fix is to widen the walking policy's initial states rather than bend recovery's stance to suit walking.
Outcome
The spec records only a successful compile (py_compile); the hang test was left to be done on site. The operator runbook carries the three-step procedure (hang with stand as LOCO, mat and push, then omni walk as LOCO) but no outcome.
Mechanism
Two policies trained separately each assume their own history, clock and last action; a switch that carries any of them across feeds the next policy a state it never saw - the design called this "the walking policy seeing a ghost history".
Conflicts
The 08-09 design requires resetting history, clock and previous action plus a command ramp; the 08-14 implementation records last_action clearing and a zero command during recovery; the one-leg spec of 2026-09-14 lists the handoff hygiene as specified but not implemented - reset_history() is called by nothing (a 215-dim policy would carry four frames of pre-fall history), the phase clock is not zeroed, and there is no command ramp back to LOCO. No hardware run of the FSM is recorded in either source.
Applies when
- switching between separately trained policies on hardware
- a policy with history or phase observations is re-enabled mid-run
- the robot lacks a sensor the switching criterion was designed around
“**判据**:进 RECOVERY = 倾角 >65°(`--fall-tilt-deg`)持续 0.3 s;回 LOCO = §5 真机可测子集:倾角 <15° ∧ |ω|<1 ∧ **膝直 <0.35 rad(NX 无高度观测, 高度门用膝直代理 —— 防 V3.0 型"跪坐但直立"误判)** 持续 1 s (`--recover-hold`);RECOVERY 单次 >15 s(`--recovery-max-time`)安全停。 … **切换卫生**:两向切换 last_action 清零;RECOVERY 态 cmd 强制 0”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §50 FSM 双策略调度(2026-08-14,用户令):deploy_policy --recovery-policy Torque caps cannot soften footfalls - impact is falling-mass momentum, only the reward can treat it
landing-impact-not-fixed-by-torque-capsClassify each hardware symptom by the physics that sets it: quantities fixed by ballistic momentum at contact must be treated through the policy's trajectory (reward terms on approach velocity/force), never through actuator caps - and size such penalty weights against your own tracking reward, not a lighter robot's.
Symptom
Footfalls slammed at 1.78x body weight in sim baseline (human walking: 1.2-1.5x); the tempting hardware-side fix was cutting actuator torque limits.
Context
Measured directly: scaling torque limits from x1.0 down to x0.4 left peak landing force essentially unchanged (1.75 -> 1.78x body weight) - the impact force comes from the momentum of the falling mass at touchdown, not from motor effort. The fix has to change the trajectory, i.e. the policy, i.e. the reward: feet_contact_forces penalty above a threshold of 113 N (= 1.2x the 9.58 kg robot's weight), clipped, weight -0.005. The weight was sized locally, not copied: the reference robot's -0.001 would amount to 0.9% of tracking reward on this robot ("策略不会理它" - the policy would ignore it); -0.005 gives 4.4%.
Change
Added threshold-type contact-force penalty (-0.005, threshold 1.2x body weight) as one of v6-minimal's three changes; hardware torque cuts explicitly rejected as a footfall treatment.
Outcome
Landing force 1.72x -> 1.55x by v6 (target <1.5x, missed by 3% - progress booked honestly); the torque-cap dead end was documented so it would not be retried.
Mechanism
At touchdown the ground stops a ballistic mass; the impulse is set by approach velocity and effective inertia, which motors can no longer influence in the final instant. Only earlier trajectory choices (approach velocity, timing) reduce it - and those are selected by the reward, not by actuator limits.
Applies when
- footfall impact or landing noise on hardware
- proposals to derate torque as a softness fix
- importing contact-force penalty weights from another robot
“⚠️ 硬件限扭降不了落脚力 —— 砸地力来自下落质量的动量: 实测 tau ×1.0→×0.4, 落脚力 1.75→1.78× 体重纹丝不动。只有这条奖励能治。… ⚠️ 权重不能用 Pi 的 −0.001 —— 实测在我们身上只占跟踪奖励的 0.9%, 策略不会理它 (Pi 6.94 kg 更轻)。−0.005 给到 4.4%。”
train/WALK_V6_MINIMAL.md § ③ 新增 feet_contact_forces Two machines, one configuration - every gain, offset and torque limit changes only in robot.yaml, whoever edits pushes at once, both checkouts show the same commit before the robot moves, and a pulled policy file is size-checked and synced before power-off
two-machine-config-disciplineTreat the robot's configuration as a versioned artifact with one source of truth, push every change immediately, verify identical commits on every machine before a hardware session, keep hardware limits in the repo and the firmware in sync in both directions, and verify transferred model files (size, digest) before running them.
Symptom
The robot's onboard computer runs the bridge and deploy scripts from its own checkout while training and analysis happen on other machines; a hot fix left on one side, or a half-written file, silently makes the robot run something other than what was evaluated.
Context
The operator runbook's "wall version" of the two-machine discipline: configuration changes only in robot.yaml (calibration offset/sign, gains, torque limits), committed and pushed from the Mac, pulled on the robot, bridge restarted; code is not edited on the robot, and if it is, it is committed and pushed on the spot - nothing unpushed overnight; 30 seconds before every real-robot session both checkouts must show a clean status and the same last commit hash; changing tau_max requires writing the motor's limit_torque too (and the reverse); re-zeroed motors require re-measuring offsets. The recovery line added: after pulling on the robot, check the ONNX is not zero bytes (a lesson from a corruption incident on 08-12) and sync before cutting power; the recovery and main lines are separate worktrees, each pulled with --ff-only.
Change
Operating rules, pinned on the wall and repeated in the hanging checklists ("git pull, both machines on the same commit").
Outcome
The sources record the rules and the incident that produced the size check; they do not record a count of sessions the rules caught.
Mechanism
A policy is evaluated against one configuration; any divergence between the machines, or a truncated file, turns a hardware result into a result about an unknown configuration.
Applies when
- a robot's onboard computer and a workstation both hold the configuration
- someone hot-fixes code or gains on the robot
- model files are copied or pulled to the robot before a session
“改配置只改 robot.yaml(标定 offset/sign、增益、限扭全在里面)→ Mac git commit + push → NX git pull → 重启桥。 … 谁改完谁立刻推,永远不留未推送的改动过夜。 … 每次上真机前 30 秒检查:两边 git status 干净、git log -1 哈希一致。 … 铁律不变:改 tau_max 必须同步写电机 limit_torque(反之亦然);电机重新标零后 offset 必须重测回填 yaml。”
RL系统/FOLLOW THIS copy 2.md § ② 双机维护纪律(贴墙版) The get-up kept getting faster because standing earlier paid more every step - lowering torque authority barely slowed it, and only zeroing the standing income for the first 3 s moved the pace into the design band
per-step-income-drives-speed-time-gateWhen a skill is too fast, find the term that pays for finishing early and gate that income by time; keep the "get into position" term ungated so the policy does not learn to wait, use a ramp instead of a cliff, and confirm with a paired same-level experiment that the drift is motivational before changing it.
Symptom
The user judged the get-up too fast (Isaac medians about 0.7-1.6 s) and suspected path dependence: the policy seemed to get faster the longer it trained.
Context
Lowering the beta authority 0.40 -> 0.30 cut impact but moved supine only 1.70 -> 2.00 s: coordination-limited, not torque-limited. A paired experiment inside one beta level (checkpoint 15,600 vs 18,499, +2,900 iterations, same ruler) measured the drift: get-up medians -7 to -10%. The spec concluded the motive, not the path, was the cause - per-step standing income pays for every early step, and any lineage (even one from scratch) races toward the fastest solution inside its constraints.
Change
V2.5: the standing income (base_height, stand_pose, still, feet_on_ground) multiplied by w(t) = clamp(t/3 s, 0, 1); upright deliberately NOT gated, so righting and sitting up early still pay and the policy is not taught to lie flat and wait; a ramp, not a step. V2.5b: zero before t0 = 3 s, then a 1 s ramp.
Outcome
V2.5: Isaac 100%, get-up +17-43% slower, MuJoCo 100/100/98/100% (the best cross-simulator reading yet), still short of the 3.5-4.5 s design band - a linear ramp only discounts early income. V2.5b: MuJoCo supine 2.04 -> 4.10 s and prone 3.18 -> 4.04 s, inside the band; the Isaac pace barely moved (a lineage habit on a gradient-free plateau). Later the zero gate proved harmful when trained from scratch (curriculum-history-is-part-of-the-product) and in the V3.1 lineage (time-gate-vs-wide-stance-retire-the-fix).
Mechanism
Constraints on authority or velocity change how the fastest solution looks; the time structure of the task income decides how fast the fastest solution is.
Applies when
- a policy is faster or more aggressive than wanted and constraints do not slow it
- progress-style rewards pay every step spent at the goal
- performance drifts faster with more training at fixed settings
“**V2.5 机制(唯一)**:站立收入(base_height/stand_pose/still/feet_on_ground) 乘时间斜坡 w(t)=clamp(t/T_gate,0,1),T_gate=3.0 s;**upright 刻意不门控** (翻正/坐直早期照常拿钱,防"躺平等门开" … **用户假设量化 证实:逐步计酬动机在 β 包络内持续压缩时间,约束挡不住动机 —— V2.5 动机层 修法为正解。**”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §39 V2.5 预注册 / §39 补 配对实验