Training Coach
Doctrine
A report may cite any of these as doctrine-N.
doctrine-1Contract freeze and fingerprint disciplineThe policy I/O contract (observation layout, scales, history semantics, action pipeline) is frozen and fingerprinted; every exported policy is stamped and verified; contract changes ship as new versioned profiles that leave old artifacts bit-identical, and old policies run forever under their era's pinned profile.
Case. The 215-dim omni contract was frozen with a three-machine digest; the one contract-level extension (lateral feed-forward) went in as a new `omni_ff` profile with the old profile provably untouched, and the contract checker caught two real wiring bugs before any training (`contract-freeze-and-checker`). A silently changed gait-clock default would have fed old policies a 25% slower clock - closed by pinned legacy profiles (`legacy-profile-pinning`). A stale derived USD forked plant mass 2.2% until an automated source-vs-derived instrument gated it (`derived-asset-staleness-check`). A gain profile is part of the closed loop a policy was trained in and belongs in its stamp; the recovery line's anchored authority was left out of its manifest and recorded as the gap not to repeat (`gain-profile-belongs-in-the-stamp`), and a second policy behind a deploy-side switch made the handoff state itself a contract (`recovery-two-policies-and-a-state-machine`, `walk-recovery-fsm-handoff`).
Coach application. On any proposal touching obs/action semantics, defaults, or derived assets: demand the version/profile plan, the fingerprint update, and the checker extension in the same change; flag any old artifact that would run under new defaults.
doctrine-2Attribution by resolved training params - never eval-override knobsCapability differences between lineages are explained only by digging each lineage's *resolved* training configuration and eliminating columns; evaluation-side override knobs (kd-scale, power-scale, cycle-time) act on the plant for *every* policy and may serve as deployment mitigations but never as explanations.
Case. Low-friction robustness across 8 lineages x 3840 cells was traced to kd DR *bandwidth* - every lineage had ground friction pinned to (1.0,1.0), so "trained friction" could not be the axis; the parameter axis and the plant axis were explicitly separated after the first attribution conflated them (`kd-bandwidth-mu-law-attribution`). "Weak turning" on hardware was a power-scale plant effect, not a training gap (`deploy-knob-attribution-before-retraining`); slowing the deploy clock was out-of-distribution, not a feature (`cycle-time-override-is-ood`). The ground truth for what a run trained under is the logged per-run config, not the source tree (`resolved-config-is-source-of-truth`).
Coach application. Whenever asked "why is lineage A better", require the resolved-param table first; kill zero-variance columns; refuse explanations phrased in eval-knob terms; when a knob helps, label it deployment mitigation.
doctrine-3PASS gates become constraints; FAIL gates become objectivesOnce a skill passes its gate, that gate converts into a standing regression constraint (budget <= 2/20 against the parent baseline) for all later training; gates currently failing are the only legitimate objectives of the next rung.
Case. The C ladder ran one frozen 13-cell x 20-seed matrix at every rung with promotion = "new skill PASS and old skills within regression budget"; C1 was stopped and re-rooted precisely because it trained away the root's backward PASS (`fixed-acceptance-matrix-per-rung`, `preregistered-stop-criteria-per-rung`). The C4 product shipped only at 260/260 cells with zero regression.
Coach application. Keep the ledger: every PASS adds a constraint row; propose rungs only against FAIL rows; treat any constraint violation as stop-and-attribute, never "the next rung might win it back".
doctrine-4One variable per ladder rung - counted against what the checkpoint sawA rung changes one variable, where "one" is counted against the checkpoint's actual training state, not against the current config's diff; batching is allowed only when each change owns a disjoint symptom space with a pre-registered ablation order.
Case. Two rungs failed identically because resuming s1e-500 under the evolved config silently added four plant variables the checkpoint had never seen ("单变量纪律不只看「我改了什么」,还要看「checkpoint 见过什么」" - `resume-state-dr-audit`). v8 legally batched four orthogonal fixes with a written ablation order (`orthogonal-batch-with-ablation-order`); v9 spent one run completing a 2x2 factorial so either outcome convicted a factor (`fill-the-missing-factorial-cell`); v10b's three-way ablation wrongfully convicted the clock and had to be retried fairly.
Coach application. Before any resume: diff cfg against the checkpoint's logged training state. Before any batch: require the symptom-ownership map and ablation order in writing.
doctrine-5Pre-register risks, readings, and stop criteria before the ladderBefore a ladder or risky rung, write down the known risks, the interpretation of every plausible outcome, and hit-any-one stop criteria - frozen before training, tightened when priors say results should come fast.
Case. The C ladder opened with three numbered risks including the exact falsification condition for its own root choice; A/B arms carried "预注册读法(事后不改)" tables; a level expected to fail was run anyway for its pre-registered diagnostic value (`preregister-risks-and-fork-readings`). Stop criteria caught C4-redo rungs at +200 instead of full caps (`preregistered-stop-criteria-per-rung`); hardware sessions pre-registered per-config expected signatures and the disagreement rule "不改结论改账" (`preregistered-real-expectations`, `feasibility-accounts-lock-design-point`).
Coach application. Refuse to open a rung without the written risk/reading/ stop block; after results, read conclusions off the pre-registered table and flag any post-hoc reinterpretation.
doctrine-6Plant parameters are measured, never inventedEvery plant number carries measurement provenance: armature = N^2 x rotor inertia from no-load tests, friction split by rig and by API column, torque limits shaped by per-joint gait peaks, latency traced through the real pipeline, masses weighed - and DR bands are additive around the measured nominal, sized to the measured dispersion.
Case. Guessed friction was 2.5x low and guessed damping 5x high (`friction-measured-not-guessed`); armature had been 0 with a 9:1 gearbox (81x reflected inertia, `armature-n2-rotor-inertia`); a uniform torque derating was "the wrong shape" vs measured peaks (`torque-limit-shape-by-measured-peaks`); the delay implementation itself was a wrong plant for a whole lineage (`latency-lerp-reverse-extrapolation`); the run design point was locked by three accounts including the tau_limit/kd speed ceiling (`feasibility-accounts-lock-design-point`); identified friction had to land in the right simulator API columns to act at all (`sim-api-friction-columns`). The recovery and one-leg lines opened with the same kind of accounts before any reward existed - a connected static path and the torque along it for an armless get-up, and the gains single support needs to be holdable at all (`get-up-feasibility-accounts-before-training`, `single-support-gain-authority-probe`).
Coach application. For any plant value in a config review, ask "measured how?"; reject absolute ranges with no nominal; check API column mapping and derived-asset regeneration whenever measured values land.
doctrine-7Sim2sim gate before sim2real - under deployment conditionsEvery checkpoint passes a second, independently built simulator before hardware, and both the gate and the smoke loop run under the measured deployment conditions (real pipeline delay, honest contact parameters, the deployment gain/power profile).
Case. The standing order "先sim2sim 再sim2real" (`sim2sim-gate-before-sim2real`); acceptance flipped to match hardware only under measured condim/torsional friction (`eval-plant-honesty-contact-params`); gates moved permanently to `--delay 2` after the kicking incident (`pipeline-latency-is-plant-not-dr`); and the harness itself must be audited - a frame-convention bug in the cross-sim evaluator invalidated a whole line of verdicts (`body-frame-velocity-api-audit`). The recovery line's second simulator caught a torque penalty paid for by bracing the legs together (`torque-penalty-bought-by-leg-bracing`), and a 1.8x torque disagreement between the two plants stayed binding because its one surviving explanation was never tested (`torque-disagreement-between-simulators-unresolved`).
Coach application. Block any hardware request lacking a second-sim PASS at deployment conditions; when sim2sim and training-side metrics disagree, treat the evaluator as a suspect too.
doctrine-8Observation honesty - the actor's inputs are a hardware contractThe actor observes only signals the real robot produces with realistic noise; privileged truths go to the critic; history windows are estimators and must train under plant variation; rewards on quantities the actor cannot observe buy only average suppression, never closed-loop correction.
Case. Ground-truth velocity/forces went critic-only (`observation-honesty-critic-only`); frame_hist under zero DR memorized the trainer's plant fingerprint - 0/20 transfer (`history-obs-needs-plant-variation`); world-frame yaw rewards could not teach pull-back because heading is unobservable to the actor - correction was routed to the deploy outer loop instead of breaking the contract (`reward-observability-limit`, `deploy-heading-loop-and-align-training`).
Coach application. Audit every actor-obs element for hardware existence; require minimal plant jitter whenever history/recurrence exists; for each reward, ask "can the actor see this error?" and route correction tasks to outer loops.
doctrine-9Reward economics are audited in realized currencyReward design decisions are made on realized per-step magnitudes under the actual policy and command distribution: price the do-nothing optimum before adding a mode, compare achieved values to the computed ignore-floor, calibrate thresholds between measured healthy and sick distributions, and ship every new penalty with a withdrawal clause.
Case. feet_air_time at weight 2.0 realized 0.038 vs tracking 1.2 - drag was rational (`realized-contribution-audit`); ignoring a vy command cost 28-180x less than ignoring vx until a gated tracking term was added (`reward-cost-of-ignoring-audit`, `gate-new-reward-terms-by-command`); achieved-vs-floor separated "never learned" from "priced out" (`ignore-floor-diagnosis`); the foot-distance wall was placed between measured healthy (0.6% tax) and sick (55%) policies (`calibrate-threshold-between-healthy-and-sick`); the landing penalty carried a pre-registered stand-down condition and actually stood down (`calibration-threshold-with-withdrawal-clause`); two clearance terms were inert until zero-points and gate occupancy were checked (`inert-reward-term-audit`). A get-up policy sat because three gated terms paid the seated pose 84% of the return and the one term that could tell sitting from standing was an exp kernel reading 4.6e-5 at the real error (`seated-basin-dead-exp-kernel`); a torque-tail term was weighted by its measured steady value beside a peer term after the estimate proved 12x off (`tail-torque-needs-hinge-on-computed-demand`).
Coach application. Never discuss weights in the abstract: demand the realized-contribution table, the ignore-floor number, and the healthy-pay calibration before any reward edit is approved.
doctrine-10The zero-cost option must be the desired behaviorFor every penalty, name what the zero-cost option is; penalize failure events (slip, saturation excess, contact in flight windows), never the motion or joints that healthy behavior uses; make degenerate strategies fatal via termination where penalties cannot price them out.
Case. Joint-usage penalties for drift taxed a 1.4%-of-momentum channel 2.7/step and collapsed training; the slip penalty costs a non-slipping gait exactly zero (`penalize-the-slip-not-the-joint`). A frozen-at-clamp joint pays zero action-rate forever - only a pre-clip saturation penalty flips the cheat economics (`saturation-cheating-zero-rate-cost`). Ungated phase shaping made standing 42x more expensive than stepping and cooked the hip motors (`moving-gate-42x-stand-tax`); crouch-shuffling lived until a height termination deleted it (`termination-closes-degenerate-basin`). A gated penalty is an exit: the policy parked just outside an uprightness gate, then just under a height gate, to stop paying a stance tax, and only a positive band plus an always-on guard closed both (`penalty-gate-is-an-escape-hatch`); a soft-limit penalty that charged the standing pose itself bought a 4.1 deg lean (`soft-limit-penalty-charges-nominal-pose`); an unpriced foot attitude was spent on edge-standing (`unpriced-foot-attitude-is-a-free-variable`); and the one-leg line listed its cheapest cheats before training and still met one through a zero-gradient band (`enumerate-cheapest-cheats-before-training`, `binary-band-reward-fake-touchdown`).
Coach application. Run the "零代价的选项是什么" audit on every proposed term; convert motion taxes into event-conditional penalties; check the termination set against each known degenerate strategy.
doctrine-11Measurement discipline: independent referees, signs, distributionsA disputed measurement is adjudicated only by an independent algorithm from raw state; directional ability requires sign-antisymmetry under command reversal; bimodal metrics are reported as mode shares (never medians, never 3 seeds); ratios are not comparable when totals change; reward values compare only within one command distribution; single chaotic events never cross machines.
Case. The triple reversal - a good metric was "refuted" by a sibling metric that shared the disease (`independent-referee-for-metric-disputes`, `body-frame-velocity-api-audit`); same-signed +/- responses were bias, not turning (`same-sign-response-is-yaw-bias`); the swing median sat in a bimodal gap (`median-hides-bimodal-distribution`); "v6 is jitterier" died on absolute energies (`ratio-metrics-need-absolute-check`); yaw gain measured 15x wrong in an oscillating frame (`heading-integral-not-body-rate`); a 44% improvement evaporated under same-distribution comparison (`same-distribution-reward-comparison`); drift direction was a limit cycle (`multiseed-sign-test-for-drift`); a cross-machine push cliff was chaos (`single-impulse-recovery-is-chaotic`).
Coach application. Before accepting any surprising number: ask for the independent recomputation, the sign pair, the distribution shape, and the comparison conditions. Retract in writing when a metric falls.
doctrine-12The deployment pipeline is plantIrreducible pipeline properties - action latency, rate limits, power/torque scaling, teleop command mappings - are part of the nominal plant, modeled from day one and reproduced in every gate; deploy-side scalings are crutches that flag unmodeled plant, and they cannot be algebraically folded into training constants.
Case. Right-leg kicking was over-trained-delay x loop gain; power 0.8 was a gain-reduction crutch that retired when the delay was modeled (`pipeline-latency-is-plant-not-dr`); power derating damages non-forward axes first (`power-scale-hurts-nonforward-axes`); training at 0.4 scale as the "twin" of deploying 0.5 x 0.8 collapsed 0/20 (`deploy-scaling-not-training-equivalent`); one shared teleop speed sent an out-of-band lateral command and the robot clipped its own foot (`teleop-command-band-per-axis`); the latency DR range had not even covered the measured pipeline (`latency-dr-covers-measured-pipeline`). A rate limiter added at deployment only clipped a policy that kept commanding (`deploy-rate-limiter-windup`); moved into training and anchored on the last command it became an integrator in the balance loop (`slew-anchor-is-an-integrator`); anchored on the measured angle it bounded torque and kept the bandwidth (`beta-anchored-action-target`). The walking lines' safe setting, power-scale 0.8, cut the ends of the recovery policy's full-range travel and left its spikes alone; a gain inside the trained band did the job (`power-derating-cuts-full-range-contract`).
Coach application. Demand the measured pipeline latency/limits in the plant model and in gate conditions; treat every deploy-side derating as a question ("what is this compensating?"); block per-axis command sources that exceed training bands.
doctrine-13DR budget is finite; its distribution is the measured supportRobustness is a conserved budget: disturbance training on an already-hardened lineage borrows from existing margins; DR ranges span the measured deployment support - no fictitious tails (they buy degenerate gaits), no single constants (they allow thin-margin specialization); harden the plant only after the task distribution is final.
Case. The same push dose helped a narrow lineage and damaged a balanced one - budget conservation (`push-dr-conditional-budget-conservation`); wide latency tails bought drag-glide, constant values shipped 60% thinner tilt margins - the answer is a narrow band on the measured support (`dr-tail-plant-continuation`, `constant-value-dr-overfits-margin`); task-first ordering because hardening a soon-to-change task wastes budget (`task-shaping-before-plant-hardening`); COM randomization used deliberately as a behavior-shaping tool, and rolled back on symptom per its own contract (`com-randomization-forces-leg-spread`, `com-dr-rollback-on-symptom`). DR that is switched on can still be thin: the run policy fell in the frontal plane its gain-and-latency randomization never touched (`thin-dr-judged-by-channel-coverage`), and a friction priority settled under one action contract had to be re-measured under the next (`friction-priority-re-measured-after-plant-change`).
Coach application. Before any DR rung: check the untrained policy against the spec, the lineage's current DR load, and the measured real-world range; after it: audit retained margins, not just the new tolerance.
doctrine-14Gates measure what hardware feels: posture, margins, stripped assistsAcceptance batteries carry posture-class rows (tilt max median, per-joint L/R asymmetry, temperature) beside task rows, graded margin columns beside binary gates, chirality scored per side, at least one condition that removes the environment's free stabilization, and validated predictive scalars promoted into the gate.
Case. Three same-shaped judging errors - survival, displacement, wz-difference - all missed what the operator felt; posture metrics had the predictive power (`task-metrics-vs-posture-metrics`, `stand-gate-posture-not-survival`); binary survival saturated and hid a 60% margin gap (`constant-value-dr-overfits-margin`); v5 passed everything on the ground and failed suspended (`suspension-probe-removes-free-stabilizer`); the hip_roll (l+r) scalar predicted real drift direction and ordering and entered the battery (`hip-roll-sum-predicts-lateral-drift`); averages hide chirality (`chirality-scored-separately`); gait-quality gates are judged at speeds that demand a gait (`low-speed-commands-reward-dragging`). The recovery line added the rest of the kit: where failed episodes end, not only where they started (`end-state-confusion-matrix`); a frozen acceptance distribution with a pinned seed (`frozen-acceptance-distribution-and-pinned-seed`); video of the metric rollout itself (`video-as-acceptance-record`); and the admission that a 10 s episode cannot see a stance that fails after a minute (`episode-length-bounds-what-a-gate-sees`). The one-leg line removed a foot-spacing wall that no gate measured, and the feet met on hardware (`removed-wall-returns-on-hardware`).
Coach application. Review every battery for posture rows, margin columns, per-side scoring, and an assist-stripped condition; when operator feel and gates disagree, suspect the metric class first.
doctrine-15Fork and root selection: recoverability, maturity, frozen rewardsChoose fork roots by which candidate's deficits the coming training can pay back (precision is recoverable; lost plasticity, symmetry, and margins are not); prefer mature checkpoints as roots even when younger ones score better as products; never fine-tune through a reward change - continuation is legal only with the reward frozen and plant/DR widening one rung at a time.
Case. s1e-500 beat higher-precision candidates because its exclusive strengths were unrecoverable (`fork-root-recoverable-shortfall`); the b300 arm proved maturity is capital against adaptation shock (`root-maturity-vs-product-quality`); the B-arm scatter/half-recover/collapse signature falsified reward-change fine-tuning and drew the legal boundary for S2 continuation (`fine-tune-reward-change-falsified`).
Coach application. For root debates, build the exclusive-strengths table and ask "which side can be trained back?"; require dual-arm evidence for maturity claims; classify any proposed continuation as reward-frozen or not before approving.
doctrine-16Curricula: verified engagement, lineage counters, disease-phase gatingAutomatic curricula must prove they engage (a saturated ratchet is constant DR wearing a curriculum's name); every ramp counts lineage-cumulative progress, not per-process steps; penalties aimed at late-stage pathologies ramp in after exploration noise decays; difficulty rises on measured per-stratum success, never on schedule.
Case. The s1f ratchet capped at iter 248 and never engaged (`auto-curriculum-engagement-check`); the saturation ramp re-fired at +600 after every resume and no shipped product ever saw the penalty (`curriculum-counter-lineage-steps`); the same penalty worked once gated to the disease phase and became an untouchable mechanism (`gate-penalties-to-the-disease-phase`); record-high aggregate reward hid a fully-failing delay stratum (`aggregate-metrics-mask-subgroup-failure`); bucket share is not a gradient lever (`bucket-share-is-not-a-gradient-lever`). An assist curriculum keyed to a pooled success share was withdrawn on the strength of the categories that already worked (`curriculum-criterion-conditioned-on-lagging-category`); a pace set by per-step income moved only when that income was time-gated (`per-step-income-drives-speed-time-gate`), and the same gate had to be retired in a lineage without the disease (`time-gate-vs-wide-stance-retire-the-fix`).
Coach application. Ask every curriculum three questions: does it engage (show the internal state)? what does it count (process or lineage)? when is it present (against the pathology's phase)? Check where shipped checkpoints sit relative to every ramp.
doctrine-17Probe before training: feasibility first, hypotheses in tablesAfter two failed training attempts at a skill, stop training: demonstrate the behavior open-loop, enumerate hypotheses in a written table audited against actual configs cheapest-first, race one probe per side of the sim2real boundary for hardware-only pathologies, and use suspended tests to acquit or convict actuators before blaming authority.
Case. "在黑暗里试钥匙" - four sidewalk rungs failed until an open-loop probe separated exploration/waveform/authority in one experiment (`open-loop-probe-before-reward-tuning`); the foot-drag mystery fell to a seven-hypothesis config audit (`hypothesis-table-code-audit`); the period-doubling was resolved by racing a reward-side and a plant-side evidence line - and both paid off, one per sub-case (`period-doubling-evidence-race`); the suspended test acquitted the roll actuator in one measurement (`suspended-test-isolates-actuator-authority`). A read-only configuration probe told a wall from a slope in the recovery line's seated basin (`configuration-probe-wall-not-slope`), and the fix it pointed to - where the feet are - took prone from 0/159 to 158/159 (`prone-dead-end-is-foot-placement`); a knob that did not move its variable was recorded as no test of the idea (`dof-vel-penalty-is-not-a-pacing-knob`).
Coach application. When a skill resists training, prescribe the probe before any further reward edits; require verified target trajectories before imitation terms; keep a falsified-fixes list so closed roads stay closed (`amplitude-cut-falsified-yaw-fix`).
doctrine-18External advice is recomputed locally; values transfer as ratiosEvery external suggestion is classified adopt / already-have / modify / trap by recomputing its claim on the local reward table and probe data; numeric values transfer only as dimensionless ratios (to tracking weight, leg length, sqrt(gL), control rate); citations are verified to exist.
Case. "Start vy very small" would have destroyed sidewalk learning on this reward table - the gradient scales quadratically (`external-advice-audit-against-own-arithmetic`); swing-height targets and weights transferred correctly only through leg-length and tracking-ratio scaling (`transfer-ratios-not-absolutes`); the "6-step delay" was refused for lacking a control rate (`latency-dr-covers-measured-pipeline`); a borrowed reference's structure was FK-verified and its amplitude re-derived from the division of labor (`reference-structure-fk-amplitude-division`); retrieval agents fabricated verbatim arXiv quotes - only source-verifiable material was used; and one dismissed suggestion later proved right for a different mechanism, and was credited (`cycle-average-tracking-for-gait-quantities`). An advisor's staged state machine turned out to exist in none of the three papers it cited, and reading them changed the plan (`advisor-paraphrase-vs-paper`).
Coach application. Intercept every "paper X does Y" with the local recomputation; convert absolutes to ratios before comparison; verify quotes; revisit dismissed advice when new mechanisms appear.
doctrine-19Hardware sessions are scripted experiments, not tuning sessionsReal-robot time executes a pre-registered matrix: risk-ordered (baseline first, fragile last with a spotter), stage-gated (suspended smoke before ground), A/B sessions bracketed by a repeated reference run, operators briefed on measured zero-command and untrained-axis behavior, chirality-aware disturbance protocols, no field tuning - the only legal field changes are scripted, single-variable, and self-reversing.
Case. The S2 acceptance sheet (`risk-ordered-real-deployment`, `battery-bracketed-real-ab`, `know-zero-command-behavior`, `push-test-chirality-protocol`, `no-field-tuning-protocol`); the RAM-only torque experiment with automatic power-cycle rollback (`reversible-single-variable-field-experiments`); and the sim-veto rule - even sim's condemnations get one safeguarded hardware check when they judge the purpose-built configuration (`sim-veto-needs-real-confirmation`). The recovery line's first real run went ahead with its preconditions unmet and was stopped as dangerous (`first-real-get-up-violent-stage-one-policy`); after it: a staged hang, mat and floor protocol (`staged-hang-mat-floor-for-get-up`), a fixed power-cycle pre-flight and two-machine discipline (`power-cycle-preflight`, `two-machine-config-discipline`), a fall guard replaced rather than switched off (`fall-guard-becomes-a-state`), and logs that are part of the run (`hardware-log-is-the-attribution-input`).
Coach application. Turn every hardware request into a runbook with order, gates, brackets, briefing, and anomaly plays; refuse improvised parameter changes on the floor.
doctrine-20Close questions in writing; restart when the debt is structuralAudited questions get frozen verdicts with citable wording and an explicit reopening bar; hardware verdicts are dated by deployment-stack and calibration state and expire when those change; and when successive rungs shuffle symptoms without net progress, freeze the lineage as regression baselines, pay the structural debts, and retrain minimal - carrying laws and instruments, not weights.
Case. The chirality and COM questions were closed with frozen wording and "no reopening without new hard evidence" (`frozen-verdicts-semantic-boundaries`); v5/v6's condemnations expired with the deploy stack (`stale-verdicts-under-old-stack`); a 2-degree calibration fix moved the whole runnable envelope (`zero-offset-calibration-shifts-envelope`); plant upgrades are era boundaries with paired re-baselining (`plant-swap-invariants-vs-shifts`); and the 2026-08-05 reset froze v5-v11, fixed the latency FIFO / manifest / sampling / reward-table debts, and restarted - producing the lineage that reached hardware SOTA (`freeze-lineage-fix-structure-restart`, `minimal-reward-table-with-provenance`). The recovery line's real-robot verdicts ended up in three places that disagree, one of them an undated note in a command file (`write-hardware-verdicts-back`).
Coach application. Maintain the closed-questions ledger and quote it when symptoms recur; stamp verdicts with stack/calibration versions; when a team is three rungs into symptom-shuffling, raise the restart question explicitly with the freeze-fix-restart pattern.
doctrine-21Name the quantity in the space it lives inA goal, reward term or acceptance criterion about the feet, the base or the contact state is computed from the quantity itself - world poses, forces, per-category outcomes - never through a joint-angle, single-signal or pooled stand-in that assumes everything else sits at nominal; and every detector is validated on a behaviour known not to contain the event before it becomes a gate.
Case. The recovery line was caught three times: |ankle roll| as "flat feet" sold stance width and the real robot slid into the splits, a hip-roll criterion was confounded by 50 deg of yaw, and the joint table said 0.271 m where the feet were 0.159 m apart; task-space terms produced the first flat, wide stance (`joint-space-proxy-for-task-space-quantity`). Flight detection lied in both directions across two lines - foot height flagged 40% false flight on a walking gait, contact force alone flagged slip chatter as hops (`contact-detector-single-signal-lies`). A pooled height average described a robot that did not exist - six in ten standing, four in ten sitting (`zero-partial-credit-is-not-an-iteration-problem`) - and the walking line had learned the same lesson on yaw rate (`heading-integral-not-body-rate`).
Coach application. For every reward term and gate row, ask what physical quantity it stands for and whether it is measured directly; flag joint-space or single-signal stand-ins for task-space goals, ask for a detector validated on a negative control, and split pooled metrics by category before reading them.
doctrine-22Continuation needs a live gradient; a release is chosen by a scanContinue a converged policy only on a change that creates a live gradient, on a short budget, with every checkpoint scanned on the transfer axis; choose a release by running the full battery over a band of checkpoints and stop on signals, never by taking the last one; and when edits to the terminal phase cannot move a behaviour, roll back and retrain with the constraint present from the start, keeping the order in which the lineage acquired its mechanisms as explicit curriculum phases.
Case. A continuation with no new gradient drifted MuJoCo transfer from 100/98% to 80/28% while every Isaac gate stayed perfect, and a live-gradient continuation at the same depth kept it (`converged-continuation-is-poison`). One-leg checkpoints 100 iterations apart failed 1 and 38 of 40 cells, and late ones degraded (`checkpoint-choice-is-a-full-gate-scan`). Four in-lineage stance fixes failed because the stance was the end of the get-up path, and from scratch it grew right (`stance-decided-by-get-up-path`); fixes stacked on degraded states were rolled back by the user (`stop-stacking-roll-back-and-audit`); and the lineage's final recipe, trained from scratch in one run, sat at 0% because the order of its curriculum was part of the product (`curriculum-history-is-part-of-the-product`). The omni line's short adaptation budgets and mature roots are the same law seen from the other side (`continuation-budget-not-from-zero`, `root-maturity-vs-product-quality`).
Coach application. Before approving a continuation, ask for the new gradient, the budget and the transfer axis in the scan; before approving a release, ask for the scan; after three rungs without progress on the target, propose rolling back to the last good checkpoint and a from-scratch phase plan instead of a fourth patch.
Experience cards
89 cards matching “friction-measured-not-guessed”.
Guessed joint friction was 2.5x low and damping 5x high - measure, then DR around nominal
friction-measured-not-guessedMeasure frictionloss and damping separately (they need different rigs), put the measured value at DR center, and express DR as an additive band around that nominal - a DR range around a guessed value can exclude the real robot entirely.
Symptom
Old MJCF friction values were invented, not measured; when finally measured, every guessed value was wrong by a large factor in some direction.
Context
Joint friction split into Coulomb (frictionloss, tau_c) and viscous (damping b). Measured with the robot hung from a crane (吊机测) while armature was measured no-load; the two measurements are deliberately separated. Old MJCF: frictionloss 0.05, damping 0.1, DR joint_friction range [0, 0.1] "凭空拍的" (made up out of thin air).
Change
Replace guessed values with measured ones - frictionloss: RS06 0.15 / RS02 0.12 / RS00 0.13 N*m (old 0.05, i.e. 2.5x too low); damping: 0.02 N*m*s/rad on all three motor types (old 0.1, i.e. 5x too high). DR reshaped from an absolute made-up range [0, 0.1] to an additive band around measured nominal: joint_friction_add [-0.05, +0.10].
Outcome
"摩擦定稿(与 armature 一起, plant 参数第一次全部来自实测)" - friction frozen as part of the first fully-measured plant; DR now brackets a measured truth instead of spanning an invented interval.
Mechanism
Coulomb friction and viscous damping have opposite behavioral signatures (constant-torque threshold vs velocity-proportional drag); guessing both wrong in opposite directions gives a plant that is simultaneously too easy to start moving and too hard to move fast. DR centered on a wrong nominal makes the policy robust to a family of plants that does not contain the real one.
Applies when
- plant friction/damping values have no measurement provenance
- DR ranges are absolute intervals rather than bands around a nominal
- policy is over- or under-damped on hardware relative to sim
“测关节摩擦。吊机测，而armature应该空机测试。… frictionloss τ_c (N·m) │ 0.15 │ 0.12 │ 0.13 │ 0.05(低 2.5×) … damping b (N·m·s/rad) │ 0.02 │ 0.02 │ 0.02 │ 0.1(高 5×) … DR │ joint_friction_add: [−0.05, +0.10] 叠标称 │ 旧 [0, 0.1] 凭空拍的”
Experience.md § 摩擦定稿表 (lines 12-25) Friction DR was demoted after a measurement (94% success at mu 0.4 with no friction randomization) and promoted again when the action contract changed and mu 0.4 fell to 76% - DR priorities belong to a plant and contract, not to a task
friction-priority-re-measured-after-plant-changeRe-measure transfer along the friction axis for every new action contract or plant, not once per task; a DR priority settled under one action parameterization does not carry to the next.
Symptom
Getting up is all scraping and pushing against the ground, and training pinned friction at 1.0, so friction looked like the first thing to randomize.
Context
The MuJoCo gate on R0.5 (5 categories x 10 seeds x 4 friction levels) measured 100/100/98/94% at mu 1.0/0.8/0.6/0.4: degradation showed first as time (prone 3.2 -> 5.3 s), not failure, so friction DR was demoted and the DR budget earmarked for mass/COM. After the switch to the beta-anchored action space, V2.2 read 90/94/90/76%: mu 0.4 was now the weak row.
Change
V2.3 (single variable): friction DR static (1.0, 1.0) -> (0.2, 2.0), dynamic (0.15, 1.6), the HiFAR range keeping the base dynamic/static ratio; restitution untouched. Continued from v2_2.
Outcome
Isaac nominal 99.8% (DR did not hurt the nominal plant); MuJoCo 98/98/96/92% - mu 0.4 76 -> 92%, mu 1.0 back to R3.1's 98% with bounded torque.
Mechanism
How much a policy leans on friction depends on how it moves; the spec records that the sensitivity rose after the action contract changed but does not establish why.
Applies when
- changing the action space, gains or authority of an existing skill
- deciding which DR axis to spend the next rung on
- an earlier sweep justified leaving an axis unrandomized
“**μ 砍到 0.4(训练值的 40%)仍有 94%**,退化先体现在**用时**(prone 3.2→5.3 s) 而不是成败。μ≥0.8 完全无损。→ **§17 曾把"摩擦随机化提到 R4 第一项"当作优先 事项,这条实测把它降级了**”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §21 MuJoCo 复核门 ② 摩擦依赖 Isaac splits Coulomb friction into static and dynamic columns - wiring only static means zero loss during motion, silently discarding the identified value
sim-api-friction-columnsWhen installing identified actuator parameters, map each measured quantity to the simulator's exact API column for the operative regime (dynamic for moving loss, viscous for damping), verify per joint after landing, and audit how randomization intervals fall on each column's nominal.
Symptom
The hardware-identified Coulomb friction (tau_c) was about to be installed into the trainer through the friction= field alone - which in Isaac 5 populates only STATIC friction, so during motion the joints would lose no torque at all: "只给 static 则运动中不损耗, 辨识的 τ_c 走路时等于没接" (the identified tau_c would effectively not be connected while walking).
Context
The v12 integration wired all three columns deliberately: armature= and friction= from the 2026-08-04 hardware identification, PLUS dynamic_friction= (Isaac 5 splits Coulomb into static/dynamic; the moving-loss column is dynamic) and viscous_friction= (= the measured joint damping 0.02, aligned to MJCF's damping). Each value was re-checked per joint after landing. A DR interaction was audited and booked rather than hidden: randomize_joint_parameters jitters ALL friction columns with ONE interval - the [-0.05, +0.10] band was calibrated against the Coulomb nominal, and landing on the viscous nominal 0.02 it becomes [0, 0.12], "偏宽但保守" (wide but conservative), accepted with the note that pre-viscous behavior was already [0, 0.10] on a base of 0.
Change
Measured actuator parameters installed across all applicable API columns (armature, static, dynamic, viscous), with the DR side effect on shared randomization intervals audited and recorded.
Outcome
The first generation where the identified plant actually acts during motion in the trainer; the silent-column failure mode documented before it cost a training run.
Mechanism
Physics engines decompose "friction" differently (single coefficient vs static/dynamic/viscous columns); a measured parameter is only installed when it reaches the column the solver reads in the regime that matters (motion, not stiction). Randomizers that share one interval across columns rescale the band by each column's nominal - a hidden unit change.
Applies when
- installing identified friction/armature into any trainer
- porting plant parameters between simulators or engine versions
- joint losses in sim do not match bench measurements during motion
“并额外传 dynamic_friction=(Isaac 5 把库仑拆 static/dynamic 两列,只给 static 则运动中不损耗,辨识的 τ_c 走路时等于没接)与 viscous_friction=(= joint_damping 0.02,对齐 MJCF damping)。… randomize_joint_parameters 用同一个 friction 区间抖三列, [-0.05,+0.10] 是按库仑标称标的,落到粘滞标称 0.02 上成了 [0,0.12]”
train/WALK_V12_SPEC.md § 7. 核查单 (Isaac 接 V.ACTUATORS 新字段) Run acceptance under measured contact parameters - honest condim/torsional-friction flipped a false PASS into a real-matching FAIL
eval-plant-honesty-contact-paramsPin the evaluation plant's contact model to measured values (contact dimension, torsional/rolling friction, mu) before trusting any gate that involves slip, impact, or drift - a gate can only fail a policy for physics its simulator contains.
Symptom
walk_v5 passed the old acceptance battery yet failed on the real robot (footfall force, drift, kicking) - the evaluation plant was flattering the policy.
Context
The battery was re-run under "honest contact parameters" - condim 4 (adding torsional contact) with measured torsional friction 0.035 - and v5 then FAILED exactly the rows corresponding to its real problems: heading 185 deg (limit 30), support-foot yaw slip 284 deg (limit 80), landing force 1.72x (limit 1.5x), suspended tilt 45.9 deg (limit 10). The slip physics depends on torsional friction, which the default contact model (condim 3) does not even simulate - a slip problem is invisible to an evaluator that cannot represent yaw friction at the foot. Term-sizing measurements for the new rewards were likewise taken under the same honest parameters (cmd 0.45, skipping the 5 s start transient).
Change
Acceptance harness pinned to condim 4 / torsion 0.035 (measured); verdicts issued under defaults declared non-citable for these rows.
Outcome
Sim acceptance verdicts began agreeing with hardware ("现在失败, 与真机一致"); the v6 fixes could be developed and validated against an evaluator that could actually see the disease.
Mechanism
An evaluator is a plant model too: contact dimensionality and friction values decide which failure modes exist in the simulation at all. Evaluating under default contact parameters tests the policy in a world where its real failure is physically impossible, producing structurally false PASSes.
Applies when
- sim acceptance passes policies that fail on hardware
- slip/drift/impact gates run under default simulator contact settings
- setting up a cross-simulator evaluation harness
“accept_v2.py 已加三条判据, walk_v5 在诚实的接触参数下(--condim 4 --torsion 0.035)现在失败, 与真机一致:直行 15s 航向累计 <30° | 185° ✗ … 落脚力峰值 <1.5× 体重 | 1.72× ✗”
train/WALK_V6_MINIMAL.md § 5. 验收 Low-friction robustness traced to kd DR bandwidth, not friction training - by digging resolved params across 8 lineages, 3840 cells
kd-bandwidth-mu-law-attributionAttribute capability differences by tabulating every lineage's resolved training params and eliminating zero-variance and non-aligned columns first; never let an eval-side override knob serve as the explanation axis, and never write a mechanism into a law before it survives a targeted test.
Symptom
Lineages differed wildly in low-ground-friction survival, and the intuitive explanation - "some trained ground friction, some didn't" - was about to steer the ladder toward a ground-mu training rung.
Context
The attribution ran as a full parameter-vs-result cross: 8 lineages x 4 eval kd levels x 6 mu levels x 20 seeds = 3840 cells, with each lineage's RESOLVED training params dug out and compared item by item. First kill: all 8 lineages had ground mu pinned at (1.0,1.0) - zero variance - so low-mu differences cannot come from friction training at all. The only training parameter aligned with the mu score was kd DR bandwidth: narrow (<=0.24) lineages scored 19.9/19.5/19.5, wide (>=0.40) scored 17.1/15.2/14.6/14.2/12.8 - the two groups completely non-overlapping. Every rival was excluded item by item (kd center no; kp band no; COM small-beneficial non-driving; friction rung a clean double null 19.5->19.5 and 15.2->14.6; iteration count non-monotonic), and the one clean single-variable causal link confirmed it: the s2e-3 kd surgery (0.7,1.3)->(1.08,1.32) moved the score 17.1->19.5. Counter-proof against "each best at its own operating point": the narrow-band lineage evaluated OUT of band (18.2) still beat the wide-band lineage at its own band center (9.2). Two axes were ordered never to be conflated (the first attribution's own error): training kd bandwidth is a parameter axis / lineage property; the eval-side --kd-scale knob is a plant axis (more damping physically helps on slippery floors for ALL policies) - "plant 轴只能当部署缓解,不能当 归因". A tempting mechanism story ("drag vs step attractor") was tested and falsified, and explicitly kept OUT of the law: "机制未定, 不入定律".
Change
The planned ground-mu training rung was recommended closed ("建议 不开") in favor of a kd band-narrowing rung (0.8,1.2)->(0.9,1.1) centered on the deployed value - with a pre-registered risk that the law demands "bandwidth = measured dispersion" and the real robot's kd dispersion was not yet measured; if it exceeds +/-10%, narrowing sacrifices real coverage and the rung must yield.
Outcome
A whole training rung was deleted from the ladder by attribution alone (the second S2 pass dropped mu and push, 5 rungs -> 3); floor material became a deployment-selection input (mu <~0.6 -> deploy the kd1.2 gain profile) rather than a training target.
Mechanism
Cross-lineage performance differences must be attributed over the actual training-parameter table, not over eval knobs or plausible stories: eval knobs act on the plant for every policy (a physical effect), while lineage properties come only from training-time parameters. Zero-variance columns are free eliminations, and one clean single-variable rung is worth more than any correlation.
Applies when
- explaining why lineages differ on a robustness axis
- an eval-side knob (gain scale, power) changes results and invites misattribution
- deciding whether to open a DR rung for an axis never actually varied in training
“8 血统地面 μ 训练带全部钉 (1.0,1.0) 零方差,低 μ 差异与「训没训地面摩擦」无关,是 kd DR 带宽的副产物 … 宽 ≤0.24 → 19.9/19.5/19.5;宽 ≥0.40 → 17.1/15.2/14.6/14.2/12.8, 两组完全不重叠。… 训练 kd 带宽 = 参数轴/血统属性;评测部署 --kd-scale = plant 轴 … plant 轴只能当部署缓解, 不能当归因。… 机制未定, 不入定律。”
train/OMNI_V0_SPEC.md § 4. 地面 μ 鲁棒性 = kd DR 带宽的副产物 (2026-08-08) After installing the measured plant, re-run all generations paired on old and new plant - identity metrics carry verdicts, physics metrics re-baseline
plant-swap-invariants-vs-shiftsTreat every plant upgrade as an era boundary: re-run the retained policy set paired (same seeds/flags) on both plants, carry forward only verdicts whose metrics proved plant-invariant, re-baseline the rest - and mine the systematic shifts as measurements of the old plant's biases.
Symptom
With the plant finally fully measured (weighed masses 9.792 kg, bench-identified armature, in-situ friction), no historical sim number was comparable to new runs - "历史 sim 数字跨纪元不可比" - and it was unknown which historical verdicts still held.
Context
The era-2c cross-test ran all seven walk generations on the complete plant under one harness (14/14 survived), then re-ran the same 14 configurations on the OLD plant retrieved from git, same flags and seeds, with a self-check (one historical record reproduced digit-for-digit). The split was clean. Policy-identity metrics moved essentially zero across the plant swap - dominant frequency (v7's period-doubling 1.20 -> 1.20), knee amplitude (9.9 -> 10.0), foot distance (+/-2 mm), saturation (100 -> 100, 0 -> 0) - so all seven cross-generation verdicts (freeze signature, saturation-line closure, knee-collapse location, slip-penalty accounting, N2 lineage, v6's balance, v11's triad) were re-confirmed on the honest plant. Plant-physics metrics shifted systematically with ordering preserved: slip down 10-25% (measured friction makes ground-twisting costlier), landing vertical velocity down 15-50% ("旧 plant 高估落地 凶度"第二次独立证实), landing force mixed (mass up 2.2% vs friction braking the swing - two effects fighting). Exactly ONE behavior-level change: v8's low-speed period-doubling vanished (1.30 -> 2.50, lift normalizing) - confirming it had been machine-dependent bifurcation-edge behavior that armature+friction push off the knife edge, while v7's period-doubling stood untouched: saturation-freeze-driven, a policy property, not a numerical accident.
Change
Era re-baselining protocol: after any plant upgrade, one paired same-seed sweep of all retained generations on old and new plant; verdicts keyed to identity metrics carry over, thresholds re-read against the new-plant table, and the differences themselves become plant-physics findings.
Outcome
Seven verdicts survived with evidence rather than assumption; two causes of the period-doubling family were separated with plant-side proof; and the sim's landing-violence overestimate was independently confirmed a second time.
Mechanism
A policy's structural properties (frequencies, amplitudes, frozen joints) are functions of its weights and survive plant changes; contact-mediated quantities are joint properties of policy and plant and shift when the plant becomes honest. Pairing seeds across plants isolates the plant's contribution exactly, so the sweep both validates history and measures what the old plant had been lying about.
Applies when
- installing measured masses/armature/friction into the sim
- historical thresholds are cited across a plant change
- a hardware-only behavior might be bifurcation-edge sensitivity
“策略身份指标逐位不动:主频(v7 1.20→1.20)、膝摆 … 这些是策略属性,plant 换代携带无损,历史定论因此全部成立。… 唯一行为级变化:v8@0.15 的倍周期消失(主频 1.30→2.50…)——印证当时"分岔边缘、机器相关"的判定:armature+摩擦把 v8 推离刀锋;v7 的倍周期纹丝不动(1.20→1.20),它是饱和冻结驱动的深层属性,不是数值巧合。”
train/README.md § 纪元 2c 全代同机横测 (2026-08-04): 完全体 plant 上历史结论全部存活 Ideal PD is not enough - add a delay buffer and fit armature/friction/delay per joint
actuator-delay-buffer-fittingNever ship ideal PD to hardware: add a measured delay (in control steps) and per-joint armature/friction fitted from step and sine responses, and treat remaining actuator mismatch as your standing largest sim2real residual.
Symptom
Standard ideal PD actuator model transfers poorly; sim assumes targets take effect instantly and joints reach arbitrary acceleration.
Context
A developer with a successful on-hardware Isaac Lab biped modified the actuator model in two ways and calibrated it against the real robot: step-response plus sine-sweep tests (positive step, negative step, sine tracking), overlaying sim curves on measured curves and hand-tuning.
Change
(1) Delay buffer: action targets take effect after a uniform 6 time-step delay on all joints; (2) acceleration limiting so the actuator cannot reach arbitrary acceleration; (3) per-joint fit of armature / friction / delay - different joints genuinely needed different values.
Outcome
Hip joints fit worst, knee best; the developer rated the result "not perfect, the best I could do" and still listed actuator-model improvement as next work - i.e. even the fitted model remained the dominant residual.
Mechanism
Real actuation is a lagged, bandwidth-limited system; a delay buffer and acceleration cap are the two cheapest structures that reproduce its phase and magnitude response. Per-joint differences come from differing load, wiring, and friction states, so a single global constant underfits.
Applies when
- actuator model in sim is ideal PD with no delay
- step-response of real joint visibly lags or overshoots the sim's
- budgeting which sim2real gap to attack first
“标准 ideal PD actuator 不够用，他改了两处：延迟缓冲：目标不是立即生效，全部关节统一 6 个 time step 延迟 / 加速度曲线：执行器不能瞬间达到任意加速度 … 用 armature / friction / delay 三个参数逐关节拟合，标定方法是阶跃响应 + 正弦扫描 … 髋部关节偏差最大，膝关节最好。”
Experience.md § 执行器建模 —— 最值得抄的一条 (lines 50-59) When training fails repeatedly, inject the target behavior open-loop - stop tuning rewards for an unverified behavior
open-loop-probe-before-reward-tuningAfter two failed training attempts at a skill, stop training: demonstrate the behavior open-loop on the real plant/sim first, and only resume training once you hold a measured, safe, sign-verified target trajectory.
Symptom
Three sidewalk training rounds failed; hypotheses multiplied (exploration failure / wrong reference waveform / insufficient authority) with no way to pick between them by running more training.
Context
Instead of a fourth reward guess, the team wrote probe_side_ref.py: the candidate reference is injected open-loop on top of a frozen policy's output (bypassing PPO entirely), directly measuring "what happens if the robot literally does this waveform" - separating all three hypotheses in one experiment (5 seeds x 8 s per condition, several waveform families and gains). The probe immediately eliminated the authority hypothesis (full-amplitude execution, 5/5 survival) and localized the problem to the waveform/measurement side. The closing principle was written down after the saga: without a verified target behavior, tuning rewards is "在黑暗里试钥匙" (trying keys in the dark).
Change
Standing method: before opening another training rung on a failing skill, build an open-loop (or task-space) generator of the intended behavior, measure whether the physical system can express it and what it looks like - then train toward a verified, quantified target.
Outcome
The probe chain produced the verified waveform (reversed-sign triangle, half gain), quantified safe amplitude (tilt 8.2 deg at band top, foot distance clear of the wall), exposed the metric bug when probe and training disagreed, and ultimately supplied the feed-forward that made C4 pass in +100 iters.
Mechanism
Training couples exploration, reward design, and feasibility into one opaque outcome; open-loop injection cuts the loop and tests feasibility and waveform alone. A behavior demonstrated open-loop converts the remaining failure into a pure credit-assignment/reward question - and its measured trajectory becomes the reference itself.
Applies when
- repeated training failures on one skill with multiple live hypotheses
- uncertainty whether the platform can physically express the behavior
- a reference trajectory's shape/sign/amplitude is guessed, not measured
“三轮 FAIL 之后不再猜，写 train/probe_side_ref.py 把参考开环注入到策略输出之上（绕过 PPO），直接量「照这个波形做会怎样」，一次分开三个假说：甲 探索 / 乙 波形 / 丙 权限。”
train/C_LADDER_RUN.md § 3f. C4 真因定谳（开环探针） / 3k. 建议的下一步 A single-signal contact detector lied in both directions - foot height flagged 40% false flight on a walking gait, contact force alone flagged false flight during low-friction slip - so flight became force < 5 N AND sole height > 5 mm
contact-detector-single-signal-liesDefine contact and flight events from two independent signals (force and geometry) in conjunction, validate the detector on a behaviour known not to contain the event before using it as a gate, and match the trainer's threshold when comparing across simulators.
Symptom
The run line needed a flight-fraction gate. The first MuJoCo version, "sole higher than 2 mm", measured 40% flight on a walking policy that never flies. Five weeks later the one-leg gate, using contact force alone, reported support-foot "flight" segments at mu 0.4 for a policy that was not hopping.
Context
During a walking step the toe lifts or the heel strikes with the foot pitched, so the ankle-roll origin rises a few mm while part of the sole still touches - height alone calls that flight. Switching to contact force < 5 N (the same threshold Isaac's contact reward uses) zeroed the false flight on walking. In the one-leg re-test every force-only "flight" segment had a measured sole height of 0.0 mm: the normal force chattered while slip corrections played out on low friction.
Change
Run line: flight = contact force < 5 N ("lift-off must be judged by contact force"). One-leg line (2026-09-16): flight = force < 5 N AND sole height > 5 mm, recorded as the same measurement lesson in the opposite direction; the gate's behavioural meaning was unchanged.
Outcome
With force-based detection the walking policy read 0.0 flight and the run policy's zero flight was confirmed by two plants; with the conjunctive definition the one-leg support-foot gate stopped reporting false hops.
Mechanism
Each signal has its own failure: geometry moves without leaving the ground (foot pitch), and forces drop without leaving the ground (slip chatter); requiring both removes both families of false positives.
Applies when
- writing a flight, lift-off, hop or slip detector for a gate
- a gate reports an event the video does not show
- reusing a detector on a different gait or floor friction
“首版用**足底高度>2mm** 判离地, 在 omni_s1e 走路策略上测出 40% 假腾空 … 改用**接触力 <5N**(与 Isaac feet_contact_number 同源阈值)后 空检归零 (walk 策略 flight_frac 0.0)。**课文: 离地判定必须用接触力, 高度判 会把脚的俯仰当腾空**”
train/README.md § run R1 立项 (2026-08-09): Mac 侧新工具 + 一次空检抓获 A 10 s acceptance episode left 6-7 s of standing to observe - a narrow stance held for that window and split on hardware; a gate cannot see instability slower than its own horizon
episode-length-bounds-what-a-gate-seesSize the standing phase of an acceptance episode, and its disturbances and floor friction, to what deployment will impose; a pass on a short static window certifies only that window.
Symptom
v2_6 passed every simulation gate (success 99.6%, re-falls 0-1%) and then, on the real robot, stood up and slid into the splits several times; prone starts stood and then fell backwards.
Context
Acceptance ran 10 s episodes; a ~1-2 s get-up left roughly 6-7 s of static standing on a nominal floor with no disturbance. The narrow stance's lateral margin and the straight-knee stance's lack of any flex buffer are both failure modes that need time, disturbance or lower friction to show.
Change
The gap was booked as a known blind spot of the gate ("long-duration standing stability") alongside the task-space stance criterion; later rungs added MuJoCo friction sweeps at mu 0.4 to every checkpoint scan.
Outcome
The spec through §50 records the blind spot but no longer standing window or disturbance row in the recovery acceptance itself.
Mechanism
An acceptance episode observes only the dynamics that unfold within its horizon under its conditions; slow drifts and disturbance-triggered failures are outside it by construction.
Applies when
- a policy passes sim gates and fails on hardware after a delay
- acceptance episodes are short relative to deployment use
- stability is judged without pushes or friction variation
“**sim 门为什么没逮住**:10 s episode 起身后只站 ~6-7 s,静态窗口内窄站距 撑得住;真机站立时长/扰动谱在门口径之外 —— 长时站立稳定性记为口径缺口。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §43 判读:sim 门为什么没逮住 Continuing a converged policy on a change that carried no new gradient drifted its transfer from 100/98% to 80/28% over 3,000 iterations while every Isaac gate stayed perfect - scan every checkpoint on the second simulator's friction axis
converged-continuation-is-poisonBefore continuing a converged policy, check that the change creates a live gradient; if it does not, cap the budget at a few hundred iterations, and in every continuation scan each checkpoint on the second simulator's transfer axis (for example low friction) - trainer-side gates can stay perfect while transfer decays.
Symptom
V2.7-A (swap the flat_feet term for a compensated version, continue from v2_6c) finished with the line's best Isaac score (100%) and a MuJoCo transfer collapse: mu 1.0 98 -> 80%, mu 0.4 98 -> 28%; the stance it was meant to widen had not moved.
Context
The new term's calibration run showed a near-zero tax from the start: the policy already satisfied it, so the reward landscape offered nothing new. A checkpoint scan on MuJoCo mu {1.0, 0.4} located the damage: +100 iterations 100/98% (better than the baseline), then 86/54, 60/38, 80/28 - monotonic decay with training length, while entropy and action noise rose (7.77 -> 8.18, 0.588 -> 0.612): drift, not sharpening.
Change
Rule written in: with no new gradient, a continuation budget is short (at most a few hundred iterations) and the MuJoCo transfer axis enters every checkpoint scan. The next rung (V2.7b, a live stance-width gradient) was budgeted at 1,000 iterations with mu {1.0, 0.4} scans every 100 and a stop-on-signal rule.
Outcome
V2.7b kept transfer at the same depth (mu 1.0 98% / mu 0.4 92% at +1,000, where A had already rotted to 86/54) and at +3,000 (100/96%): a live gradient preserved transfer. V2.8 then broke that pattern (mu 0.4 2%): the gradient must also be compatible with the policy's existing form.
Mechanism
On a converged reward landscape PPO keeps updating without a signal to follow, and the random walk is pulled toward whatever the training plant rewards idiosyncratically - invisible in the trainer's own gates.
Conflicts
The drift mechanism is the spec's reading of one decay series plus one contrasting run; V2.8 is recorded as an exception to "live gradient keeps transfer".
Applies when
- fine-tuning a converged policy with a small reward change
- a continuation run's trainer-side metrics improve while real or cross-sim results worsen
- choosing which checkpoint of a continuation to ship
“**checkpoint 扫定死因**(μ1.0/μ0.4):**29500(+100 iter)= 100/98%** (优于基线!)→ 30400 = 86/54 → 31400 = 60/38 → 32398 = 80/28 —— **迁移随续训长度单调衰减**。 … **教训入库:收敛均衡上的长续训是毒药 —— 无新梯度时 续训预算须短(≲数百 iter),且 MuJoCo 迁移轴必须进 checkpoint 扫描。**”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §43 结果:V2.7-A 判 FAIL —— 换刀本身无罪,毒在续训预算 Set torque limits per joint from measured gait peaks - a uniform percentage is the wrong shape, and training must use the deployed numbers
torque-limit-shape-by-measured-peaksMeasure per-joint torque peaks in the actual gait and set each limit as measured-peak x margin capped at rating; then propagate the same numbers into training and add an automated deploy-time consistency check - never derate by a uniform percentage, never let training assume torque deployment will not grant.
Symptom
A uniform 50% torque derating (18/8.5/7) had piled safety margin on the joints that never use it while cutting the busiest joint below half its measured demand.
Context
Per-joint gait peaks were measured (walk_v5 at cmd 0.3/0.6): RS06 (hip_pitch/knee) uses 5.5-5.9 N*m = 15-16% of its 36 N*m rating - cutting it to 12 is a free safety win; RS02's ankle_pitch runs at 16.2 N*m = 95% of its 17 N*m rating - "它是速度的硬件瓶颈", no room to cut; RS00 measured 36-44%, capped at 11. The resulting shape 12/17/11 replaced the uniform percentage. Sweeps across several limit sets (rated / 50% / 14-17-11 / 12-17-11) produced identical speed, lift, and landing force - within this range the limits do not shape the gait; what matters is consistency: "关键是训练和硬件必须是同一个数", because the exporter fills effort_limit from tau_limit, and a policy trained at rated 36/17/14 "会假设有三倍力矩可用" while deployed at 12/17/11 (exactly the v5 cross-generation inconsistency later suspected in its wild kicking).
Change
robot.yaml tau_limit set to the measured-shape 12/17/11, firmware written to match, and train/isaac_values.py regenerated so training sees the same limits; the deploy tool self-checks limits against robot.yaml on every run.
Outcome
Free safety margin captured where demand is low, the real bottleneck joint left at rating, and the train/deploy torque worlds unified with an automated consistency check.
Mechanism
Torque demand is grossly unequal across joints in a gait (15% vs 95% of rating here); a uniform percentage misallocates the safety budget by construction. And since the trainer treats effort_limit as a plant truth, any train/deploy mismatch is an invisible plant gap of exactly the mismatch ratio.
Applies when
- choosing safety torque limits for a legged platform
- training-vs-deployment actuator limit audit
- one joint runs near rating while others idle
“曾用统一 50%(18/8.5/7)是错的形状: 把余量堆在用不到的 RS06 上, 却把 ankle_pitch 砍到需求的 52%。… RS02 在 0.6 m/s 已用到额定 95%, 它是速度的硬件瓶颈 … 实测多组限幅 … 完全一致 —— 限幅在这个范围对步态零影响, 关键是训练和硬件必须是同一个数。… 若训练仍按额定 36/17/14, 学出的策略会假设有三倍力矩可用。”
train/WALK_V6_MINIMAL.md § 3. 训练侧必须同步的一件事 Cutting swing amplitude 40% raised yaw-momentum demand 53% - the falsified fix is recorded so nobody walks that road again
amplitude-cut-falsified-yaw-fixTest gait fixes against the quantity the ground must actually supply (torque/force rates vs friction ceilings), not against kinematic proxies; record falsified fixes with their mechanism so the search space shrinks permanently.
Symptom
Support-foot yaw slip stayed at ~223 deg (vs 225 deg) after walk_v6 cut joint swing amplitudes by ~40% (hip_pitch 20.6->10.4 deg, knee 31.3->18.8 deg) - the change built on the theory "smaller swing = less yaw momentum to dump into the ground".
Context
Direct measurement inverted the theory: yaw-momentum amplitude ROSE 16% (+/-0.1000 -> +/-0.1159) and its rate of change rose 53% (1.86 -> 2.84 N*m demanded from the ground), pinned exactly at the foot's supply ceiling (2.8-3.3 N*m at mu 0.6-0.7) - so slip could not drop. The extra demand lives in higher harmonics: v6's crisper foot placement (better clearance 34 mm, lower landing force) shortens the momentum- exchange window, concentrating the same exchange into less time. The verdict was written as a closed road: "下一轮不要再走这个方向". An honest residue was also booked: WHY amplitude down but momentum up 16% remained unresolved, with the named next step (per-rigid-body decomposition of H_z, since per-joint RMS sensitivity ignores phase correlations).
Change
The "reduce amplitude to reduce yaw momentum" lever was removed from the planning space; future yaw-slip work redirected toward the supply side (friction) and momentum-rate mechanics.
Outcome
Slip unchanged (225 -> 223 deg); the falsification and its mechanism became a permanent constraint on the fix search space.
Mechanism
Ground yaw torque demand scales with the rate of change of angular momentum, not its amplitude; kinematic amplitude cuts that also sharpen contact timing can raise dH/dt while lowering range. When demand exceeds the friction-limited supply ceiling, slip is set by the ceiling, so demand-side changes below the ceiling do nothing visible.
Applies when
- attacking foot slip or yaw drift via gait shape changes
- a fix targets an amplitude while the constraint is a rate
- documenting a failed intervention after a version comparison
“walk_v6 | ±0.1159 (+16%) | 2.50 Hz | 2.84 N·m (+53%) … 脚的供给上限 2.8~3.3 N·m(μ 0.6~0.7)—— v6 正好顶在天花板上, 所以滑移一点没降。… 结论: "减小摆动幅度以降低偏航动量"这条被 v6 证伪 —— 砍 39% 幅度, 需求反升 53%。下一轮不要再走这个方向。”
train/WALK_DIAGNOSIS.md § ② 未生效的机理: 减小摆动幅度反而让偏航需求上升 Anchoring the action on the measured joint angle (target = q + beta*a), with a beta curriculum down to tau_limit/kp, bounded torque by construction, removed the re-falls and later stood the robot up on hardware
beta-anchored-action-targetFor large-motion skills on position-controlled actuators, bound the action relative to the measured joint angle with a per-joint authority of tau_limit/kp, curriculum the authority down from full range, keep the curriculum state out of the observation and pin acceptance at the deployed authority - and make the deployment code refuse to run the anchored contract without a measured q.
Symptom
The V0 full-range absolute action produced violent targets; the V1 command-anchored rate limit made standing oscillate. Both failure modes came from how the action becomes a target.
Context
V2.0 (user approved, from scratch): BetaAnchorJointPositionAction, target = q_measured + beta_j(m)*a, memoryless per step. beta_j(m) = floor + m*(beta0 - floor), beta0 = the contract half-range (m = 1 reproduces V0 authority), floor = min(tau_limit/kp, beta0): hip_pitch 1.309 -> 0.40, knee 1.047 -> 0.40, hip_yaw -> 0.917, the other joints unchanged - the tightening lands exactly on the joints the V0 torque account convicted. m drops 0.1 per step when a standing-share EMA exceeds 0.35. beta is NOT in the observation, so the 45-dim contract is untouched; acceptance is pinned at m = 0 because the Python curriculum state is not saved in the checkpoint. The deployment chain got a new profile (recovery_v2: action_anchor current_q, explicit per-joint beta written into the contract, independent of the gain profile), and policy_io raises if q is missing rather than silently falling back to the absolute contract; the old profile's check reproduced its pre-change deviation bit for bit.
Change
New action term and beta curriculum; later the RS06 floor was lowered 0.40 -> 0.30 -> 0.25 (kp*beta 7.5 N*m) and the stamped deployment profile was synced to 0.25.
Outcome
First acceptance at m = 0 (v2_0b): re-falls 0% in every category, the torque gate passed for the first time on the line (worst 69.9%), knee jitter 0.004; supine 98.8 / side 88.8% with prone and mid still failing (fixed by the conditional pull curriculum). MuJoCo showed demand at or under the limits (hip_pitch 11.7/12 against V0's 26.8). Lowering beta cut impact (hip_pitch demand 9.7 -> 8.5 N*m) but barely slowed the get-up - it had become coordination-limited. Enabling the policy moves the target only +/-beta around the current pose, so there is no homing fling; the 08-11 real get-up and the later v3_1p1c both run on this contract.
Mechanism
kp*beta caps the proportional torque in a single step with no build-up delay and no memory, giving both a hard impact bound and full balance bandwidth.
Applies when
- a skill needs full joint range but hardware torque limits are low
- absolute position targets cause impacts or saturation
- changing the action semantics of a contract that deployed policies share
“**动作项** `BetaAnchorJointPositionAction`:`target = q_实测 + β_j(m)·a`, 逐步无记忆 … **Play/验收钉 m=0(= floor = 部署档)**:python 课程状态不进 checkpoint, Play cfg 显式 `beta_m_start=0` … 判读:**结构赌注兑现** —— 站姿零再摔 + 力矩账首过(kp·β 封顶按构造)”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §33 V2.0 预注册(2026-08-10,用户点头开工):β 锚定动作空间,从零训 The latency DR range must cover the measured deployment pipeline - 0-20 ms could not even reach the real 1-2 control steps
latency-dr-covers-measured-pipelineMeasure end-to-end action latency in control steps on your own stack (including cross-process queue boundaries), set the DR range to cover it with margin, and never import a delay count without its control frequency.
Symptom
Action latency was randomized over 0-20 ms (0-1 control step at 50 Hz), but the measured deployment path is 1-2 steps: the deploy process writes the target, an independently running BusWorker picks it up on its NEXT cycle, plus CAN round-trip - the training range could not cover the robot's actual latency at all.
Context
Fix: widen action_latency_s to 0-0.06 (0-3 steps). The external reference's "uniform 6 steps" was explicitly NOT copied - that number depends on his unknown control frequency; locally, a sweep at 0/1/2/3 steps showed walk_v5 survives all with insensitive metrics, so 6 steps "在我们这里没有依据" (has no local basis). The range was set from the measured pipeline with margin, not from a foreign constant.
Change
action_latency_s (0, 0.02) -> (0, 0.06), justified by pipeline analysis (writer/worker cycle boundary + bus time) and bounded by the local latency sweep.
Outcome
The DR band now brackets the true deployment latency; the policy trains against the delay it will actually face instead of a fictional sub-step world.
Mechanism
Latency DR only immunizes against delays inside its support; a range below the physical pipeline guarantees an untrained distribution shift at deployment. The correct range comes from tracing the pipeline's worst case (queueing boundaries + transport), and foreign step-counts are meaningless without the control rate they were measured at.
Applies when
- setting or auditing action-delay randomization
- deployment uses a separate bus/worker process from the policy loop
- importing delay-modeling numbers from other projects
“现行 0~20 ms = 0~1 个 50Hz 控制步, 而实测部署链路是 1~2 步(deploy 写 STATE.target 后, 独立跑的 BusWorker 下一轮才取走下发, 再加 CAN 往返)——现在的区间覆盖不到真机的实际延迟。… 不照抄参考来源的"统一 6 步": 那取决于他的控制频率(未知), 而我们扫过 0/1/2/3 步 … 6 步在我们这里没有依据。”
train/WALK_V7_SPEC.md § ⑤ action_latency_s 0~0.02 → 0~0.06 Size each joint's action authority to its measured working range - lock a channel to zero only when its job is provably elsewhere
per-joint-action-scale-lockdownSet per-joint action scales from measured target ranges and momentum decompositions: full authority for working channels, working-range authority for balance channels, zero for channels whose contribution is measured negligible - and prefer this structural quieting over perpetual reward penalties, keeping the contract dimensions intact.
Symptom
"Walks crooked" - roll and yaw channels wandered; hip_yaw peak-to-peak reached 22.3 deg in v11 while contributing essentially nothing to locomotion; a uniform action scale of 0.5 gave every joint the same authority regardless of its actual job.
Context
The v12 design replaced the scalar action scale with per-joint scales justified by measurements: pitch-class 0.5 (the gait's entire working channel - untouched); hip_yaw 0.0 - lossless because it carries only 1.4% of yaw momentum (v6 decomposition) and straight-line targets use merely +/-0.006-0.03 ("乱动纯属浪费"); roll 0.2 - NOT zero, because lateral balance and weight transfer are roll's unique job (locking it would degenerate into foot-edge rocking, "比现在更歪"), and 0.2 covers the measured working range +/-0.06-0.19 while "0.5 的另一半全是 '歪歪扭扭'的来源". Costs were accepted consciously: turning demoted to an observation row with a fallback (yaw 0 -> 0.1 in v13). Contract preserved: the 12-dim action interface unchanged, yaw values simply neutralized. The structural lockdown also RETIRED the reward-side hip_yaw_quiet penalty - "A 的 yaw=0 结构性取代,不再付奖励塑形成本".
Change
action_scale_joint pitch 0.5 / roll 0.2 / yaw 0.0 wired through robot.yaml -> policy_io (verified: all-ones action gives hip_yaw target exactly 0) -> Isaac action term, guarded by the contract checker ("它就是抓这种双侧不一致的").
Outcome
Designed and verified on the shared side before the lineage freeze; stands as the pattern for authority sizing: structure replaces reward shaping wherever a channel should simply not act.
Mechanism
Action scale is a per-channel authority budget; uniform budgets give noise channels the same voice as working channels, and reward-side quieting then pays a permanent shaping tax for what a zero scale provides for free. But zeroing is only lossless when decomposition proves the channel's contribution negligible AND no unique function (balance) lives there.
Conflicts
Wired and verified on the config/deploy side but never trained - the 2026-08-05 reset suspended v12 before the Isaac-side run.
Applies when
- some joints wander without contributing to the task
- a quieting penalty (deviation/L1) taxes every step forever
- deciding action-space authority for a new task or robot
“yaw=0 是无损的:实测它只贡献 1.4% 偏航动量、直行目标只 ±0.006~0.03,乱动纯属浪费。… roll 不能为 0:横向平衡/重心换脚是它的独有职责,锁死会退化成脚缘摇摆(比现在更歪)。0.2 的依据:各代实测 roll 目标只用 ±0.06~0.19,0.5 的另一半全是"歪歪扭扭"的来源。”
train/WALK_V12_SPEC.md § 3. A —— 逐关节动作幅度(用户"只动 pitch"的安全版) When the eval proxy has a known systematic bias, gate on within-proxy differences, not absolutes
relative-metrics-survive-proxy-biasWhere the evaluator is known-biased, design gates as within-evaluator contrasts (left vs right, A vs B, pre vs post) that cancel common-mode error; reserve absolute thresholds for quantities whose proxy calibration has been checked.
Symptom
MuJoCo systematically overestimated yaw turn gain (1.58/2.45 where Isaac measured 1.04/1.02), and friction alignment recovered only part of the gap (mu 1.0 -> 0.6 pulled it to 1.43/2.27) - so any absolute turn-gain acceptance threshold in MuJoCo would be judging the proxy's bias, not the policy.
Context
The acceptance criterion was rewritten to use only the left/right difference of the turn gain (standard: <20%): both directions pass through the same biased proxy, so the bias largely cancels in the difference while the policy's chirality - the thing being gated - survives. The absolute-gain row was dropped: "转向只判左右差,不判绝对值". A parallel task was still opened to align MuJoCo contact parameters to Isaac's (mu, restitution), since drift proved highly friction-sensitive (straight-line drift -65 deg at mu 1.0 vs +1 deg at mu 0.4) - bias reduction and bias-robust metrics proceeded together.
Change
Gate metric changed from absolute turn gain to left-right gain difference; proxy-alignment work scheduled separately rather than blocking acceptance.
Outcome
Turn acceptance became meaningful across proxy versions (v5 70% -> v6 19% difference measured the real improvement) while the absolute bias question was pursued without holding the ladder hostage.
Mechanism
A systematic multiplicative or additive proxy bias applies to both arms of a mirrored measurement; differencing (or ratioing) mirrored conditions cancels the common-mode bias to first order, leaving the asymmetry signal. Metrics built this way remain valid while the proxy is imperfect - which it always is somewhere.
Applies when
- a sim proxy disagrees with the trainer or hardware in absolute terms
- writing acceptance thresholds for direction-paired skills
- proxy calibration work would otherwise block a ladder
“转向只判左右差,不判绝对值 —— MuJoCo 的偏航增益系统性高估(实测 1.58/2.45 vs Isaac 1.04/1.02),摩擦只能解释一部分(μ 1.0→0.6 仅拉到 1.43/2.27)。差值是相对量。”
train/WALK_V5_SPEC.md § 6. 验收 The run policy never left the ground and fell in the second simulator from the frontal plane - its DR (gains and latency only) covered the actuator axis, not the frontal-plane contact and inertia disturbances the doubled stride amplified; "is DR on" is the wrong question
thin-dr-judged-by-channel-coverageJudge a DR recipe by whether its randomized terms cover the channel where the skill can lose stability, not by whether DR is enabled; when a new skill lengthens single support or enlarges motion in one plane, add disturbances in the plane it destabilizes before training.
Symptom
run R1 (6,000 iterations, 78 min): no flight phase ever appeared, and every one of 13 checkpoints failed the eight-gate MuJoCo smoke. In Isaac: zero terminations in 6,000 iterations, 4.2 deg tilt. In MuJoCo at delay 2: 1/6 survived, falls within 1.9-6.2 s at 50.8-58.7 deg, the most saturated joints all roll joints.
Context
The run contract doubled sagittal travel (knee action scale 0.9, knee swing peak 1.14 rad) with a 0.60 s period and 0.40 duty - long single support - while roll/yaw scales were deliberately left at 0.5. DR copied the s1e recipe: kp/kd (0.9, 1.1) and latency on; mass, COM, joint friction and push all off; ground friction pinned at (1.0, 1.0). Flight was read two independent ways: Isaac's per-foot contact reward stayed 0.845-0.857, never above 0.87 - the arithmetic ceiling of a gait with zero flight - and 30 of 36 MuJoCo seeds had flight fraction exactly 0 (the nonzero six were all tumbling falls). Foot lift itself worked (46-59 mm against a 50 mm design point): the walk-era "not enough travel" failure did not recur.
Change
Verdict FAIL, with the pre-registered first knob (exploration noise 1.0 -> 1.2) explicitly rejected as aimed at a different axis. The lesson was generalized and applied at the next line's design review: the one-leg spec made push, body mass, base COM and friction DR mandatory for its permanent single support and banned the thin recipe.
Outcome
The run line did not continue past R1 in the sources. The one-leg V0 with the wider DR passed its friction-variant gate (mu 0.4 and 1.2) inside a 40/40 acceptance.
Mechanism
Randomizing gains and latency covers the actuator's axis; a skill whose failure lives in frontal-plane contact and inertia needs randomization on that channel (push, mass, COM, friction), or the trainer's exact plant becomes the only one the policy can stand on - the omni_s1 transfer trap a second time, this time with DR switched on.
Applies when
- a policy is flawless in the trainer and falls immediately in a second simulator
- reusing a DR recipe from a skill with a different support pattern
- failures concentrate on one axis (roll, yaw) the DR does not touch
“**机理**: 矢状面行程翻倍 (膝摆动峰 1.14 rad) + T 0.60 + duty 0.40 的长单支撑, 把额状面扰动放大了一个量级; 而 roll/yaw 通道按 §3 **刻意没有放大** (仍 0.5), DR 又是 s1e 复刻的薄配方 (mass/COM/关节摩擦/push **四关全关**, 地面摩擦钉死 (1.0, 1.0))。 … 说明**薄 DR 的判据不能只看"有没有开 DR"**, 要看**开的那几项 是否覆盖失稳所在的通道** —— kp/kd 与延迟是执行器轴向的, 对额状面接触/惯性 扰动零覆盖。 … 0.87 正是「零腾空的走路步态」的天花板算术”
git:Lucen V2@origin/run-line:train/README.md § run R1 FAIL (2026-08-09, run 21-30-30_run_r1): 腾空零, 但病根在额状面不在探索 A DR tail the robot never has is pure cost - stage deterministic plant levels instead of one wide uniform
dr-tail-plant-continuationSet every DR range from the measured deployment distribution and cut tails that hardware cannot produce; when an axis changes the controller's character (delay, major gain regimes), prefer staged deterministic levels with gates over one wide uniform.
Symptom
Two consecutive lineages (s1e, s1f) trained under uniform latency DR (0, 0.06 s = 0-3 frames) both converged to drag-glide gaits - buying survival under heavy delay by giving up swing (3.6 mm) - even though the real pipeline never exceeds ~2 frames.
Context
The account: roughly 1/3 of training quality was spent on the >2 frame tail that hardware never presents ("uniform 尾部 ~1/3 训练质量 花在真机不出现的 >2 帧上"). The deeper reading came from the user: uniform 0-3 frames is not merely tail-heavy - it "把性质不同的控制系统 混进同一 PPO batch" (mixes qualitatively different control systems into one PPO batch); a 0-frame and a 3-frame plant demand different controllers, and one policy trained on the mixture serves neither. The S2 v2 ladder therefore redefined latency "从「随机化参数」重新定 义为 actuator/control plant 的一部分": deterministic FIFO levels, staged 1 frame then 2 frames (lo=hi so fractional interpolation degenerates to exact N frames, synonymous with the harness --delay N), each level gated by the fixed acceptance battery - a plant continuation, not a randomization.
Change
Latency DR replaced by staged deterministic levels covering the measured 1-2 tick reality with no tail; each stage a separate continuation rung with the standard gate and rollback.
Outcome
The s2_lag1 rung showed the clean-signal benefit immediately (survival 20/20, heading 6x recovery) with the swing cost booked honestly (21 -> 12 mm, half-pass, ladder paused for adjudication); the drag-glide attractor from uniform tails did not recur.
Mechanism
DR asks one policy to cover a plant family; when part of the family is fictitious, the policy pays real capability for fictitious robustness, and when family members demand structurally different controllers, gradient averaging produces a compromise controller optimal for none. A measured, discrete plant set matches the actual deployment support and keeps each rung's training signal coherent.
Applies when
- policies converge to degenerate gaits that buy worst-case survival
- a DR range extends well past the measured hardware range
- choosing between wide randomization and a staged ladder on an axis
“两轮实证(s1e/s1f)宽尾延迟 DR 逼出拖地滑行 … uniform 0~3 帧不止尾重,而是把性质不同的 控制系统混进同一 PPO batch;1→2 帧确定性分级 = plant continuation,训练信号干净得多—— latency 从「随机化参数」重新定义为 actuator/control plant 的一部分。”
train/OMNI_V0_SPEC.md § 4. v2 阶梯 (2026-08-07 用户定) One fixed acceptance matrix for every rung - new skill must PASS while every old skill stays within a regression budget
fixed-acceptance-matrix-per-rungFreeze one acceptance matrix for the whole ladder; every promotion requires the new skill's PASS plus bounded regression on every prior skill, measured against the parent's baseline under the current (bug- fixed) metric code - and include command transitions, not just steady states.
Symptom
Sequential skill training silently trades old skills for new ones (C1 trained away the root's backward ability); without a constant measurement frame, each rung's numbers are incomparable and regressions hide.
Context
The C ladder ran the same 13-cell command matrix at 20 seeds per cell at every rung (stand; vx +0.15/+0.30; vx -0.10/-0.20; vy +/-0.10; wz +/-0.20; two vx&wz combos; two vx&vy combos), with promotion requiring "新技能 PASS 且旧技能不明显退化" - old-skill regression budget <=2/20 against the parent's recorded 20-seed baseline. For the transition-rich final rung, a command-switch block was added (forward->stop, stop->backward, forward->turn, left->right, turn->forward; survival + re-track within 2 s) because "每个 steady command 都会做 ≠ 命令切换不会摔" - steady-state success does not imply switch safety, and the joystick does switches. The C4 product's gate ran 260 cells (13 x 20) all 20/20.
Change
Battery frozen once, reused verbatim per rung; baselines re-measured per parent (and re-measured again after the metric-frame fix, since old baselines were taken with the buggy coordinate reading - "旧基线是坏坐标系的， 不可引用").
Outcome
Regressions were caught at the rung that caused them (C1's backward loss, C2's vx+0.30 decay), and cross-rung comparisons stayed valid for the ladder's whole life.
Mechanism
A constant matrix makes every rung's output a point in the same metric space, so "did we lose anything" is a table diff, not a judgment call; the per-skill regression budget converts previously earned PASSes into standing constraints on all future training.
Applies when
- designing gates for sequential skill addition
- promoting a checkpoint to be the next rung's root
- after any evaluation-code fix (old baselines must be re-measured)
“新技能 PASS 且旧技能不明显退化才晋级。… C5 追加：命令切换验收（steady ≠ transition） forward→stop、stop→backward、forward→turn、left→right、turn→forward，各 20 seed，判存活 + 切换后 2 s 内是否重新跟上。”
train/C_LADDER_RUN.md § 5. 固定验收矩阵（每级跑同一张，每项 20 seed） A time gate that had cured one lineage's rushing made the from-scratch lineage trade away its stance width twice (0.364 -> 0.235 m, 0.355 -> 0.251 m) - its disease was absent there, so the fix was retired and the pre-gate checkpoint shipped
time-gate-vs-wide-stance-retire-the-fixCarry a fix into a new lineage only if its disease is present there; a mechanism that cured one lineage can be net negative in another, and when doubling a term's weight recovers almost nothing, treat the two objectives as structurally in conflict and remove the one whose purpose is gone.
Symptom
V3.1's phase 2 (the 3 s zero gate on standing income, continued from P1b) kept 100% success on every friction level and slowed the get-up, but the lateral stance drifted 0.364 -> 0.235 m and hip yaw crept to 57 deg against its 60 deg limit. With the width band's weight doubled (P2c, after P1c) it drifted again, 0.355 -> 0.251 m, below the pre-registered 0.30 m failure line.
Context
The zero gate had been introduced in V2.5/V2.5b to slow the old lineage's get-up. In V3.1 the rushing was already absent: P1c got up in 0.90-1.06 s with a worst torque ratio of 73.3%, better than the stamped v2_6c, because the full beta curriculum, second-difference smoothing and pull curriculum had cured the violence inside training.
Change
Recorded as a candidate law with two data points - the zero gate and a wide stance are mutually exclusive here - and the zero gate was removed from the V3.1 recipe. P1c (the pre-gate checkpoint) went through the full stamp-level acceptance instead.
Outcome
P1c passed everything: all six criteria, lateral stance 0.355 m, foot tilt P75 2.0 deg, mu {1.0, 0.8, 0.6, 0.4} x 10 seeds all 100%. recovery_v3_1p1c.onnx was stamped and pushed to the robot channel.
Mechanism
The zero gate moves the income toward "stay stable until the end", and under low-friction DR a wide stance has a slip tail, so survival outbids the width band; doubling the band's price bought back only 0.016 m - an auction that does not converge signals structural conflict, not an under-priced term.
Applies when
- porting reward mechanisms from an old lineage into a fresh recipe
- a width, margin or posture metric erodes during a late training phase
- a weight increase produces a negligible change in its target
“**定律候选(二实证):归零门 × 宽站互斥**。 … 加价翻倍只挽回 0.016,竞拍不收敛)。 … **归零门是 v2_5 血统的历史包袱,对 V3.1 配方是净负资产,P2 阶段除名 —— P1c 即终点形态**。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §49 终验(2026-08-14) Real robot walked at half the sim clock for two generations - resolved by racing a reward-side and a plant-side evidence line, not by guessing
period-doubling-evidence-raceFor a hardware-only pathology, refuse to guess: pre-register one probe per side of the sim2real boundary (can the reward mechanism change it on hardware? can fitted plant parameters reproduce it in sim?) and let the first positive result direct the next version.
Symptom
The number-one sim2real gap: on hardware v6/v7 stepped at 1.23-1.32 Hz - almost exactly half the 2.50 Hz gait clock they were trained and simulated at; sim never reproduced it, two generations running.
Context
Instead of committing training budget to a guess, v8 pre-registered two mutually controlled evidence lines and kept the clock OUT of the training variables: (a) reward-side - if the v8 saturation fix revives joint_pos_ref (the term that pins the gait to the clock), re-run hardware and see whether frequency returns to 2.5 Hz (hypothesis: v7's frozen actions meant NO reward was pinning the gait to the clock, and the real plant - with armature and friction making high frequencies expensive - slid down to the leg's pendulum natural frequency ~1.1 Hz); (b) plant-side - record suspended joint data (fit_actuator), fit armature/friction, load the fitted values into sim2sim and see whether the 1.25 Hz reproduces IN SIM. Decision rule fixed in advance: "谁先给出阳性结果谁定 v9 的方向 (奖励侧 vs plant 侧)" - whichever line goes positive first sets the next version's direction.
Change
Period-doubling excluded from the v8 change set; both diagnostic lines scheduled in parallel as non-blocking work; frequency reported factually in acceptance with no pass/fail attached ("倍周期是否消失 不设判定,它是 §9 的关键证据").
Outcome
The gap was routed into a decisive-experiment structure rather than a speculative retrain; the plant-side line pointed at exactly the unmodeled armature/friction that were later measured and installed as the plant baseline. Resolution (era-2c full-plant retest): the family had TWO causes - v8's low-speed period-doubling vanished once measured armature+friction were installed (1.30 -> 2.50 Hz, bifurcation-edge machine sensitivity), while v7's stood untouched at 1.20 Hz (saturation-freeze-driven policy property) - both evidence lines paid off, one per case.
Mechanism
A behavior appearing only on hardware has candidate causes on both sides of the sim2real boundary; changing training to fix it tests only one side per expensive cycle. Two cheap parallel probes - one intervening on the reward mechanism, one making sim reproduce the real behavior - localize the cause to a side before any training money is spent, and sim-reproduction of a real pathology is itself the strongest form of plant validation.
Applies when
- a gait pathology appears on hardware but never in any simulator
- deciding whether a sim2real gap is reward-side or plant-side
- tempted to change the gait clock/reward to chase a hardware symptom
“倍周期(真机 1.23~1.32 Hz ≈ 时钟一半,v6/v7 连续两代;sim 从不出现):两条证据线互为对照——(a)… 真机重跑看频率是否回 2.5 Hz(假说:v7 没有任何奖励把步态钉在时钟上,真机 plant 有 armature/摩擦、高频贵,自由滑落到复摆自然频率 ~1.1 Hz);(b)真机吊挂录 fit_actuator.py … 看能否在仿真里复现 1.25 Hz。谁先给出阳性结果谁定 v9 的方向。”
train/WALK_V8_SPEC.md § 9. 平行线 (倍周期) Training the final recipe from scratch in one run - every mechanism the lineage had accumulated - produced 0% and a seated robot; the order in which the lineage acquired those mechanisms was part of why it worked
curriculum-history-is-part-of-the-productA recipe that ends a lineage is not a recipe for a from-scratch run: consolidate it as ordered curriculum phases matching how the lineage acquired its mechanisms, check that every curriculum criterion is reachable from the starting policy, and read the run's raw term values, not the total reward, before calling it green.
Symptom
V3.0 trained the lineage's whole final recipe from scratch in one 9,000 iteration run - full beta curriculum, prone-conditioned pull assist, friction DR, the 3 s zero gate on standing income, flat_feet - testing the proposition "the product is defined by its configuration, not by its training history". Training looked all green (reward 26.33, episode length 500, 100% time-outs).
Context
Read in raw units against v2_6c at the same weights, the green was a seated equilibrium: base_height 0.377 vs 0.640, stand_pose 0.205 vs 0.516, flat_feet 0.0000 (zero because it sits outside its height gate, not because the feet were flat). Acceptance: 0.0% in Isaac at the deployed authority, 0.0% on every MuJoCo friction level, and still 0.0% at the training-time authority (100% seated at 0.222 m, upright and still).
Change
The full stdout (316k lines) was read: the beta curriculum's criterion (standing share over 0.35) was met zero times, so beta never left the wide setting and the policy had no experience at the deployed authority; the pull curriculum was stuck on the same criterion. The lineage had escaped the seated basin with immediate income (V2.0-V2.2) and only then added the zero gate to cure rushing (V2.5); from scratch, the zero gate removed the early "stand fast, earn more" gradient needed to escape. Verdict "the curriculum history is part of the product", limited to n = 1. v2_6c stayed the product.
Outcome
V3.1 kept the order as explicit phases: P1 from scratch with immediate income (zero gate off) until the curricula advance, P2 adding the zero gate. P1b/P1c escaped the seated basin and passed; P2 was later judged net negative and dropped (time-gate-vs-wide-stance-retire-the-fix).
Mechanism
Mechanisms that refine a competent policy (time gates, tight authority) can delete the gradient a naive policy needs, and a curriculum whose advancement criterion the naive policy never meets freezes at its first level.
Conflicts
The spec limits the falsification to "this recipe + this curriculum criterion" (n = 1, no seed sweep, no criterion tuning). V3.1's phased run succeeding is consistent with the ordering reading but changed other terms too.
Applies when
- consolidating a long lineage of continuation fixes into one clean recipe
- a from-scratch run with all mechanisms enabled plateaus early
- curriculum state is not logged or never advances
“命题:产物由配置定义,而非训练史定义。 … 训练 log(完整 stdout 316k 行)`[beta_anchor]` 仅初始 1 行,**达标 0 次** … V2.0~V2.2 靠**即时计酬**爬出坐姿盆地(§33),站立巩固后 V2.5 才装归零门 治"过快"(§39)。**课程史是产品的一部分。**”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §42 V3.0 判决(2026-08-11):从零单 run 全机制 FAIL 于坐姿盆地 Brief the operator on the lineage's measured zero-command and untrained-axis behavior before handing over the joystick
know-zero-command-behaviorBefore any teleop/demo, measure and write down the policy's zero-command behavior and per-axis competence, label untrained axes explicitly as not-bugs, and set the floor/procedure to accommodate the known drift.
Symptom
A teleop session was about to start on a policy that does not stand still at zero command and has never been trained on lateral commands - behaviors an unbriefed operator would report as bugs or emergencies.
Context
Three measured facts were written into the teleop instructions ("都有 实测依据, 不是猜"): (1) A/D (lateral) keys will get essentially no response - probe-measured sidewalk tracking ~3%, an untrained axis: "这正是 C4 要解决的事, 不是 bug"; (2) no keypress = cmd 0, and this lineage does not stand still at zero command - a three-generation lineage property: paces in place, drifts right ~5 cm/s, net rotation -30 deg/20 s; sim survival is 20/20 (it will not fall) but it walks away slowly, so leave floor margin especially on the right; (3) S (backward) WILL respond - probe-measured 20/20 survival, 67% tracking untrained, which is also why this root was chosen for the C ladder. Plus a keybinding dry-run while suspended before touching down.
Change
Operator briefing became part of the deployment artifact: expected response per key, expected idle behavior with magnitudes and directions, and the distinction between untrained (expected, not a bug) and abnormal.
Outcome
The session proceeded with correct interpretations available in advance; the known zero-command wander was handled by floor margin and start-with-command procedure rather than misdiagnosed on the spot.
Mechanism
A learned policy's off-nominal behaviors (idle drift, untrained axes) are lineage properties, stable and measurable in sim beforehand; operator surprise converts known properties into false incident reports and unsafe reactions. A briefing transfers the measured behavior model to the person holding the controller.
Applies when
- handing a learned policy to an operator or demo audience
- the policy idles in a non-stationary way at zero command
- some command axes are untrained in the current lineage
“A/D 基本不会有反应 —— s1e 从未训过非零 vy, 选根探针实测侧走跟踪率 ~3% … 这正是 C4 要解决的事, 不是 bug。… 不按键 = cmd 0, 而 s1e 在零指令下不站定 —— 血统属性, 三代实录: 原地踏步 + 右漂 ~5 cm/s + 净旋 −30°/20s。”
train/REAL_RUN_S2.md § 附: WSAD 遥控 上机前必须知道的三条 Add a single-point-suspension test to acceptance - the ground is a free stabilizer that hides divergence
suspension-probe-removes-free-stabilizerInclude at least one acceptance condition that strips the environment's free stabilization (suspension, or equivalent) - the sim-passing policy that fails on hardware is often failing a condition the battery never posed.
Symptom
walk_v5 looked healthy in every on-ground sim test yet diverged on the real robot - the acceptance battery had never measured a condition that would have revealed it.
Context
The battery gained a single-point-suspension probe (robot hung, feet free): measure torso tilt while the policy runs without ground contact. v5 scored 45.9 deg mean tilt suspended - wildly unstable - which the file calls "最灵敏的失稳探针(拿掉地面这个免费稳定器)": ground reaction forces passively stabilize a marginal policy, so on-ground metrics saturate long before the policy's internal balance is actually sound. v6 halved it (23.0 deg, target <10 deg) - progress visible on a scale where on-ground numbers showed nothing.
Change
Suspended-tilt added as a standing acceptance row; run under the honest contact parameters battery (accept_v2 with measured condim 4 / torsional friction 0.035), under which v5 correctly FAILS in agreement with the real robot.
Outcome
The sim battery's verdict on v5 flipped from pass to fail, matching hardware; suspended tilt became the discriminating metric between v5 and v6 (45.9 vs 23.0 deg) when ground metrics differed little.
Mechanism
Contact with the ground closes a stabilizing feedback loop the policy gets for free; removing it exposes the policy's own attitude control authority. A metric measured only in the assisted condition cannot rank policies by the unassisted quantity that hardware will actually demand during perturbations and flight phases.
Applies when
- sim acceptance passes but hardware diverges
- designing an acceptance battery for a legged robot
- two candidates tie on ground metrics
“单点吊那条是最灵敏的失稳探针(拿掉地面这个"免费稳定器"), v5 在地上一切正常却在真机发散, 就是因为验收从没测过这个工况。”
train/WALK_V6_MINIMAL.md § 5. 验收 Record-high training reward hid a fully-failing DR subgroup - aggregate metrics average over draws, gates must test per condition
aggregate-metrics-mask-subgroup-failureNever gate on metrics aggregated across DR draws: evaluate at fixed representative conditions (especially the deployment-critical stratum), and if a difficulty axis matters, ramp it on measured per-stratum success rather than sampling the full range from iteration zero.
Symptom
omni_s1e trained under constant-wide latency DR (0, 0.06 s) posted the lineage's highest-ever Isaac reward (129) - while the --delay 2 smoke evaluation showed 3/3 falls from iter 1500 onward, persisting to early stop; the usable checkpoint window shrank to iters 500-1000.
Context
Diagnosis written plainly: "聚合奖励掩盖重延迟尾部子群体失败" - the aggregated reward averages over latency draws, so the majority of light-delay environments can mask the total failure of the heavy-delay tail. The remedy for the training side was a survival-gated ratchet curriculum (survival_gated_latency): the sampling cap starts at 0.02 s and rises +0.01 only when a 4096-reset window's survival (time_out share) reaches >=90%, capped at 0.06, ratchet up-only - "增益与延迟耐受一起长,不升到策略撑不住的 地方" (gain and delay tolerance grow together; never raise past what the policy can hold). The detection side was already in place from the noise-crutch episode: the per-condition smoke curve, not the training reward, is the health readout.
Change
Latency exposure made curriculum-gated on measured subgroup survival instead of uniform-from-zero; per-condition (--delay 2) smoke evaluation kept as the authoritative curve; watcher scoring adjusted (survival weighted 3x) so recovery during hard phases is not early-stopped away.
Outcome
The failure mode was caught by the smoke curve within one generation; the follow-up redesign (deterministic staged latency) superseded the ratchet, but the aggregate-masking lesson held through both.
Mechanism
Expected-return training weights each DR draw by probability, so a subgroup can contribute bounded loss while being catastrophically failed; any scalar averaged over the randomization cannot distinguish "uniformly decent" from "great on easy draws, dead on hard ones". Only conditioning the evaluation on the stratum reveals the split, and curricula should raise difficulty on measured stratum success, not on schedule.
Applies when
- training reward hits records while a fixed-condition eval degrades
- wide DR on an axis where deployment sits at one known value
- designing curricula for difficulty axes (delay, push, terrain)
“常量 latency DR (0,0.06) 从零训被证伪——Isaac reward 129 历代最高,但 --delay 2 冒烟 iter1500 起 3/3 全摔持续到早停(聚合奖励掩盖重延迟尾部子群体失败,可用窗口只剩 500/1000)。… 采样上限 0.02 起步 … ≥90% 才 +0.01s,0.06 封顶,棘轮只升不降。”
train/OMNI_V0_SPEC.md § 3. S1.5(s1e 训练塌方复盘) The smoke watcher panicked at the wrong operating point and its score goes blind when gates saturate - treat it as a survival sentinel, not a judge
smoke-watcher-operating-pointConfigure every automated evaluator at the lineage's declared deployment operating point, give it graded metrics that cannot saturate, and until then scope its authority to catastrophe-detection - never let a mis-configured watcher stop or rank a rung on its own.
Symptom
Two watcher misfires in one ladder: (1) during the friction rung the watcher (evaluating at kd 1.0) reported panic-level 1/3 survival from iter 3300 - falsified by the official kd 1.2 scan, because the lineage's design operating point was kd 1.2 and the watcher lacked the --kd-scale passthrough; (2) during the PD rung the watcher's early-stop score froze at iter 1050 despite ongoing drift improvements, because with all eight gates passing (constant 0/3 failures) the score has no gradient left - "八门全过恒 0/3 时 score 对漂移改善盲, s1f 课文三现".
Context
Both are the same category: the in-training smoke loop is an instrument with its own configuration (operating point, score design), and its verdicts are only as aligned as that configuration. The booked doctrine: "冒烟只当存活哨兵" - until the watcher evaluates at the deployment operating point with graded metrics, its role is detecting catastrophes, not ranking checkpoints; ranking belongs to the full battery at the design operating point (and the watcher's scoring was separately patched to weight survival 3x so recoveries during hard phases are not early-stopped away).
Change
Watcher debt booked (--kd-scale passthrough); score saturation acknowledged with graded columns planned; selection authority kept with 20-seed batteries at the declared operating point.
Outcome
A false panic did not abort a rung that was actually passing at its design point; a frozen score did not hide real drift gains; the instrument's authority was scoped to what its configuration can actually see.
Mechanism
An evaluator is itself configured (gain profile, delay, metrics); evaluating a policy away from its design operating point measures a counterfactual robot, and bounded scores saturate once binary gates pass, losing all sensitivity. Instruments need the same operating-point discipline as deployments and graded outputs to retain gradient.
Applies when
- an automated smoke loop contradicts the official battery
- early-stop scores freeze while graded metrics still improve
- lineages with non-default deployment gain/delay profiles
“watcher (kd1.0 口径) 3300 起 1/3 恐慌被 kd1.2 正式扫描证伪为考纲外假象 —— 工作点评测口径教训: watch_ckpt 缺 --kd-scale 透传 (待补), 冒烟只当存活哨兵。… watcher score 饱和误停 @1050(八门全过恒 0/3 时 score 对漂移改善盲, s1f 课文三现)”
train/README.md § omni_s2e_fric (watcher 恐慌被证伪) / omni_s2e_pd (500 臂) A constant-value plant rung passed every binary gate with record scores - and shipped 60% thinner posture margins that hardware exposed
constant-value-dr-overfits-marginRandomize deployment-critical axes over a narrow band spanning the measured real support - never a single value, never a fictitious tail - and report graded margin quantities (tilt margin) next to binary gates, because saturated gates rank thin-margin and thick-margin policies identically.
Symptom
s2_lag1 (trained at constant 1-frame latency) posted the strongest sim gate sheet in history (20/20 everywhere) yet was unstable on hardware, while s1e (trained across the full 0-3 frame band) was the every-run-stable SOTA at the same power.
Context
The sim autopsy (new --delay-jitter harness modeling the BusWorker's time-varying phase drift): 18 runs across constant and time-varying delays ALL survived - time variation alone does not kill - but the tilt-margin ordering reproduced hardware exactly: s1e 7.7-9.1 deg (thickest) < s2_lag1 10.7-15.0 < s1c 16.2-18.2. Attribution: constant-value training permits precise specialization to that one value; s1e's band diversity forced cross-value robustness - "恒定 1 帧训练 vs s1e 的 0~3 帧全带——分布多样性逼出跨值鲁棒,恒定值允许精确 特化" - so the constant-rung policy's margins were ~60% thinner, fine in sim's clean world, pushed over the line by real-world disturbances. Tool lesson booked: "存活门二值饱和后掩盖裕度差" - binary survival gates saturate and hide margin differences; graded margin columns (tilt-max) belong in the report. The synthesis with the opposite failure (wide tails cause drag-glide): the proposed resolution was a NARROW uniform band (0.02, 0.04) covering exactly the real 1-2 ticks - diversity inside the measured support, no tail, no single point. s1e's root selection later leaned on the same property: its full-band latency training "预装" the delay rungs and delivered "全工况稳定裕度" that survived power derating.
Change
DR-on-an-axis design refined to a three-way distinction: no wide fictitious tails (drag), no single constant values (thin margins), but a narrow band spanning the measured real support; acceptance reports gained graded margin columns alongside binary gates.
Outcome
The tilt-margin column entered the standard report; the s1e root (band-trained) carried the C ladder while the constant-value branch was archived with its three contributions credited.
Mechanism
Robustness margins are shaped by the diversity of the training distribution, not just its support: a point-mass distribution lets the optimizer trade margin for on-point performance, while a band forces solutions that keep margin across the band - and binary survival metrics cannot see the difference until the margin is spent on hardware.
Conflicts
The narrow-band (0.02,0.04) resolution was a pending recommendation ("裁决建议(待用户)") at the time of writing; the lineage instead moved root to s1e whose full-band training predated the staged ladder - the deterministic-staging card and this card record the two failure modes the final design must avoid simultaneously.
Applies when
- a rung trained at a fixed plant value aces sim but wobbles on hardware
- binary acceptance gates are all saturated across candidates
- choosing between constant, banded, and wide DR on one axis
“18 跑全活,时变性单独不足以击杀;但 tilt_max 裕度排序完整复现真机:s1e 7.7~9.1°(最厚)< s2_lag1 10.7~15.0 … 恒定 1 帧训练 vs s1e 的 0~3 帧全带——分布多样性逼出跨值鲁棒,恒定值允许精确特化 … 存活门二值饱和后掩盖裕度差(s2_lag1 sim 门 20/20 史上最强却真机不稳)”
train/README.md § s2_lag1 真机不稳 × s1e 稳的 sim 对拍(2026-08-07,时变延迟实验) mj_objectVelocity returns inertial-principal-axis frame - one API assumption poisoned eval and observations for a whole line
body-frame-velocity-api-auditVerify every frame-sensitive API against a hand-computed truth (rotate raw qvel yourself, or command a known world velocity and check where it lands) before trusting any evaluation or observation built on it - especially when a model's inertial frame is rotated from its body frame.
Symptom
Sidewalk vy read ~0 under every condition; separately, whole-policy performance was mysteriously mediocre in sim2sim while training-side numbers looked fine. Four training rungs were declared FAIL partly on these readings.
Context
base_link's URDF inertial frame is rotated 90 deg about x relative to the body frame (iquat = [0.7071, 0.7071, 0, 0]). mj_objectVelocity(flg_local=1) rotates into ximat - the inertial principal-axis frame - not the body frame, and returns center-of-mass point velocity, not body-origin velocity. Consequences measured: the "vy" column was actually vertical velocity vz (walking at cmd 0.25: old reading +0.0093 vs true -0.0424); the angular velocity fed to the policy in sim2sim was [wx, wz, -wy] - a different quantity than Isaac and the real IMU provide. RMS check over 8 s of walking: y/z axes swapped between v6[:3] and the qvel truth.
Change
Fixed sim2sim and both probes to compute ang_b = qvel[3:6] and lin_b = xmat.T @ qvel[0:3] (identical quantity to Isaac's root_ang_vel_b / root_lin_vel_b), with a standalone reproduction script (frame_bug_repro_0809.py).
Outcome
Re-scoring the "failed" C4 lineage under correct coordinates reversed the verdicts: c4r4 checkpoints showed vy 80-126% tracking (old reading: +/-2%) and vx+0.30 at 91-95% where the old metric said 0/5 - the bad frame both mis-measured vy and, via corrupted policy observations, systematically depressed all measured performance. Final product passed 260/260 cells.
Mechanism
A simulator API's frame convention is part of the observation contract; when the model's inertial frame is rotated relative to the body frame, frame-agnostic use of a "local" velocity silently permutes axes. Feeding a policy an axis-permuted angular velocity is an observation corruption that degrades behavior everywhere, not just on the axis being studied.
Applies when
- building or auditing a cross-simulator evaluation harness
- one measured axis reads near-zero under all conditions
- sim2sim scores are inexplicably worse than training-side metrics
- URDF/MJCF inertial frames are rotated relative to body frames
“base_link 的 iquat = [0.7071, 0.7071, 0, 0] … mj_objectVelocity 用的是这个 … 喂给策略的 base_ang_vel 是 [wx, wz, −wy] —— MuJoCo 侧观测与 Isaac / 真机 IMU 不是同一个量；vy_mean 报的是竖直速度 vz —— 前进 cmd 0.25 时旧读数 +0.0093，真值 −0.0424。”
train/C_LADDER_RUN.md § 3l. ⚠️ mj_objectVelocity 读的是惯性主轴系 / 3m. 一 bug 坐实 Armature must be N^2 x rotor inertia, never 0 - measure it no-load
armature-n2-rotor-inertiaEvery geared actuator carries N^2 * I_rotor of reflected inertia at the joint; set armature from a no-load measurement, never leave it 0 and never guess it.
Symptom
Sim joints accelerate more easily than real joints; old MJCF had armature = 0 (rotor reflected inertia entirely unmodeled), a systematic sim2real gap on every joint.
Context
Original hand-written MJCF plant used armature 0. The team derived and then measured the correct value: torque needed at the rotor is I_rotor * N * alpha; after the N:1 gearbox the output shaft "feels" an extra N^2 * I_rotor of inertia. With a 9:1 reduction that is an 81x amplification of the rotor inertia, far too large to ignore.
Change
Set per-motor armature from no-load (motor out of the robot) measurement instead of 0: RS06 = 0.0070 kg*m^2, RS02 = 0.0032 kg*m^2, RS00 = 0.0015 kg*m^2. Landed together with measured friction as the first fully-measured plant parameter set.
Outcome
Plant parameters "第一次全部来自实测" (first time all from measurement); became the frozen plant baseline for all subsequent training generations.
Mechanism
Reflected inertia scales with the square of the gear ratio: the rotor spins N times faster than the joint, so its kinetic energy (and the torque needed to accelerate it) appears N^2 larger at the output. Omitting it makes simulated joints unrealistically fast/light, so policies learn action rates the real actuator cannot deliver.
Applies when
- building or auditing a simulation plant model for a geared/QDD actuator
- sim policy moves joints faster or snappier than the real robot can
- MJCF/URDF review shows armature or rotor inertia set to 0 or a default
“armature 转子反射惯量有问题 在sim里面一定要处理 不能是0，空机测试。转子处需要的力矩 = I_rotor × N × α 经减速箱放大 N 倍后 = N² × I_rotor × α 所以输出轴"感觉到"多了一个 N² × I_rotor 的惯量。 这就是 armature。… 关键是那个平方。减速比 9:1 就放大 81 倍。”
Experience.md § # armature 转子反射惯量有问题 (line 9) Push-test protocol - positive side first, fragile side spotted, axes aligned in the log, and cross-machine push counts stay qualitative
push-test-chirality-protocolOrder disturbance tests from the robust side to the fragile side with protection scaled to sim-measured asymmetry, align and log frame conventions before testing, and treat cross-domain disturbance counts as qualitative evidence only.
Symptom
Hand-push testing on hardware risked falls on a side sim had already flagged as fragile, and push counts invited apples-to-oranges comparison with sim numbers.
Context
Sim chirality was explicit: descendants were far more fragile in -y (fric-3000@kd1.2: +6 N*s survived 15/20 vs -6 N*s only 3-9/20) while the s1e control was perfectly symmetric (40/40). The protocol therefore: push the positive direction first, keep a spotter for the negative side; before any push, record which real-robot side corresponds to sim's +y in the log ("上机前对一次坐标"); and - citing the chaos lesson ("混沌课文") - real push results are used only as qualitative corroboration, never compared numerically with sim survival counts across machines.
Change
Push testing became a scripted, chirality-aware protocol with frame alignment as a logged precondition and an explicit epistemic limit on cross-domain count comparison.
Outcome
The fragile side was tested with protection informed by sim's quantified asymmetry; logs stayed interpretable because the frame correspondence was recorded before the first push.
Mechanism
Disturbance-response chirality is a real, quantifiable lineage property, so test order should follow measured fragility; and perturbation outcomes are chaotic in the details (divergent trajectories from tiny differences), so counts do not transfer across domains even when qualitative rankings do.
Applies when
- planning push/disturbance tests on hardware
- sim shows directional asymmetry in disturbance survival
- someone proposes comparing real push counts to sim counts
“先正向后负向, 负向留人扶 —— sim 手性明确: 后代在负 y 向显著更脆 (fric-3000 @kd1.2: +6 N·s 15/20 vs −6 N·s 3~9/20), 而 s1e@0.8 两向 40/40 完全对称。上机前对一次坐标 … 跨机不做二值结论 (混沌课文): 真机推力只作定性对照, 不与 sim 计数对比。”
train/REAL_RUN_S2.md § 3. 抗推 (可选, 人手推; 做则按此协议) A training-side rate limit anchored on the last commanded target is an integrator inside the balance loop - two unrelated lineages converged to the same 34-43% re-fall rate, a soft penalty could not fix it, and the bandwidth arithmetic said safety and standing could not coexist
slew-anchor-is-an-integratorIf you constrain actions in training, anchor the constraint on the measured state, not on the previous command - a limiter with memory adds lag inside the balance loop; and when two different lineages converge to the same failure rate, treat the cause as structural and stop adding soft penalties.
Symptom
With the rate limit moved into training (V1), policies either could not stand up or stood up and kept falling again: the stand oscillated, fell and climbed back, 34-43% of the time.
Context
V1.0-B (user decision: explore new postures from scratch, hard constraint in training): target <- prev + clip(target - prev, +/-S*dt) at the TIGHT rates, anchored on the last issued target like the bridge. Four runs: v1_0 from scratch 0.8% - every category righted under the limit, then knelt (the limit also damped the exploration that had escaped the seated basin in V0); v1_0c continued from R3.1 99.8% get-up but 36-43% re-fall and knee jitter 0.604 rad/s; v1_0p with a pull-assist curriculum (56 N -> 0, fully withdrawn) 39.1% unassisted, re-fall 34-42%; v1_0w with a windup-gap penalty 25.4%, re-fall 18-43%. Removing the limiter from v1_0p gave 0.0%: the policy had co-adapted with it.
Change
The rate-limit route was declared dead after four runs and the line was re-rooted on a beta-anchored action space (V2, user approval required).
Outcome
V2.0's first acceptance at full authority already showed re-falls of 0-1% (V1: 34-43%), the structural bet paying off before any tuning.
Mechanism
Anchored on the previous command, a saturated policy becomes a rate controller - one more integrator in the loop - and active balance through that lag oscillates, while a kneeling sit needs no active control and is stable. The arithmetic: kp 30 needs 0.4 rad of error for 12 N*m; at 4 rad/s that takes 0.1 s, half the pendulum time constant sqrt(0.38/9.8) ~ 0.2 s; keeping standing bandwidth needs S of at least ~8 rad/s, within 20% of the 10 rad/s velocity limit - no bound at all. Anchoring on the measured angle (q + beta*a) makes the full kp*beta authority available in one step, with no memory, and caps the impact at the same time.
Applies when
- adding rate limits, slew limits or target filters to a policy's action path
- a policy stands but oscillates and re-falls after a constraint was added
- different lineages or curricula land on the same failure signature
“v1_0p(拉力课程):会站(prone 79.9%),再摔 34~42% —— **两条完全不同 血统、不同学习路径,收敛到同一失败率**。 … 动作饱和时它退化为 速率控制 = 环内多一个积分器;主动站姿平衡穿过该滞后必振荡(v1_0 的跪坐不需 主动控制,所以稳)。对照:**HoST 的 β 锚在当前实测 q,无记忆、无积分器**”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §31 结构病定案:slew 的目标锚 = 控制环里的积分器 A stronger action_rate penalty cut the median torque demand under the gate and left the p99 at 4x the limit - only a hinge on the pre-clip (computed) torque, weighted by comparison with a peer term, collapsed the tail
tail-torque-needs-hinge-on-computed-demandJudge actuator demand against the deployed limit, read the pre-clip demand (applied torque is censored and gives no gradient on the excess), use an L2 rate penalty for the median and a thresholded hinge on computed demand for the tail, and set a new term's weight from its measured steady magnitude next to a peer term rather than from a back-of-envelope estimate.
Symptom
After R0.5 hip_pitch delivered torque sat at its 12 N*m limit in a typical get-up (demand 119-125% of the limit, p99 4.2x) - zero control margin at exactly the moment modelling error matters.
Context
The 12/17/11 N*m limits are deployment limits written into robot.yaml by set_torque (RS06 at 33% of rated), and simulation uses the same effort_limit - so the gate is judged against them, not the 36 N*m rating (an early reading against the rating was retracted). Applied torque is clipped at the limit - censored data - so demand must be read from computed_torque. With the full-range action contract (hip_pitch scale 1.309, kp 30) a single-step action change of 0.306 already saturates hip_pitch, and action_rate penalizes exactly that change.
Change
R3.0: action_rate_l2 -0.01 -> -0.03 (child-run). R3.1: new torque_headroom = sum relu(|tau_computed|/limit - 0.9)^2, normalized so three motor types share a scale. Its weight was first estimated at -0.1, measured in a 12-iteration run at an effective -0.019 (12x smaller - the estimate had mixed a per-episode-peak p99 with a per-step p99, and at 1% of upright it would have been numerically absent), and set to -0.5 so its steady value (-0.095) matched action_rate's (-0.097).
Outcome
R3.0: sum |da|^2 -64%, success 99.6 -> 100%, delivered median = demand median (the clamp no longer fired in a typical episode), gate PASS at worst 79.9% - but p99 unchanged (hip_pitch 419-432% -> 427-436%). R3.1: p99 hip_pitch -> 148-189% (-57 to -65%), knee 422-439% -> 233-234%, saturation duty -60%, success 100%; the worst joint became hip_roll at 67.7%. Its cost appears in torque-penalty-bought-by-leg-bracing.
Mechanism
A squared-rate penalty presses the whole-episode sum and moves the typical step, not rare spikes; the spikes came from the kp term (large targets while a limb is blocked by the ground - velocity alone could not reach them under vel_limit), and a penalty on applied torque cannot see demand above the clip because every excess sample reads as exactly the limit.
Applies when
- torque demand saturates actuator limits in high-effort skills
- a smoothness penalty improves medians but not peaks
- a new reward term's weight is set by estimate alone
“**必须用 `computed_torque` 而不是 `applied_torque`**:后者被 `effort_limit` 削平, 是删失数据,超限样本全被压成"恰好等于限",对超限部分梯度恒为 0。 … 改按同侪定标取 **−0.5**(稳态 ≈ −0.095,与 `action_rate_l2` 的 −0.097 等量)。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §24 R3.1(torque_headroom 力矩需求越限罚) Curriculum-gate a penalty to the phase where its disease occurs - early on it only taxes exploration
gate-penalties-to-the-disease-phaseFor penalties aimed at late-stage pathologies (freezing, saturation, degenerate attractors), ramp the weight in only after exploration noise has decayed; anchor the terminal weight to measured healthy-vs-sick raw values, and shift all related tripwires to after the ramp completes.
Symptom
The action_saturation penalty, applied from iteration 0 in v8a, taxed exploration itself: with init_noise_std 1.2 the sampled actions paid ~-2.45/step before any policy had formed - while the disease it targets (clamp freezing) is a LATE pathology (v9 froze at iteration ~2624).
Context
v10 re-introduced the same penalty behind a curriculum gate: weight 0 until iter 1000, ramping linearly to -1.0 by iter 2000 - present only when the disease can occur, absent while exploration noise dominates. The trust argument was evidence, not hope: in v8a the term, while active, had pulled joint_pos_ref from 0.041 up to 0.155 and climbing - proof it can extract a policy from the frozen pit. Weight magnitudes were anchored to measured raw values (healthy v5 0.310 / v6 0.106 vs frozen v7 1.145 / v9 1.22 per step: at -1.0 healthy pays 6-18% of tracking, frozen pays 60%+, standing ~0). v10c then isolated the gated term as THE anti-freeze mechanism by single variable, upgraded to untouchable status in v11: "S 的门控机制(v10c 单变量铁案:任何情况下 不许撤,只许调终值)" - and v11 dared to relax other penalties only because S stood guard.
Change
action_saturation gated 0 -> -1.0 over iters 1000-2000 (later terminal value tuned -1.0 -> -0.5 with the gate mechanism itself frozen); tripwires adjusted to respect the gate's timing (freeze check moved to iter 2500-3000 to give the ramped term its effect window).
Outcome
Freezing stopped recurring while early training kept full exploration; the mechanism graduated from experiment to invariant within two versions.
Mechanism
A penalty's incidence depends on who occupies its support: early in training that is exploration noise (whose suppression starves learning), late it is the converged pathology. Time-gating aligns the penalty's presence with its target's presence, buying the constraint without the exploration tax - and tripwire timing must then be computed from the gate schedule, not from ungated precedents.
Applies when
- a structural penalty punishes exploration in early training
- a late-onset pathology (freeze/saturation) needs a standing guard
- deciding when a curriculum ramp should engage
“v8a 实锤它的病根是"罚在采样动作上"——init_noise_std 1.2 的早期等于罚探索(~−2.45/步);而冻结是晚期病(v9 速率 2624 才死平)… 门控让它只在病发期在场。… v8a 里它在场时 joint_pos_ref 从 0.041 爬到 0.155 且仍在升——有从低谷爬出的实证。”
train/WALK_V10_SPEC.md § 2. S 保险 —— action_saturation 课程门控 Bracket a real-robot A/B with a repeated reference run - battery drain is the confound
battery-bracketed-real-abOrder hardware A/B sessions as A-B-A: repeat the first condition at the end, and void the comparison if the bracket runs disagree - never let battery or venue drift ride on the second condition.
Symptom
In a two-policy teleop A/B on hardware, the second policy is measured on a lower battery voltage than the first - a systematic bias that would be read as a policy difference.
Context
C2 real A/B (checkpoint 700 vs A800, same floor, same day) was scripted as 700 -> A800 -> 700-rerun, with the explicit note that a teleop session drains the pack and the trailing policy "naturally suffers".
Change
Protocol: run the reference policy first AND last; if the two reference runs differ noticeably, declare the whole session battery/floor-polluted and void the A/B ("结论作废重来"). Also log electricity per run.
Outcome
Called out as the round's only systematic confound, closed by one extra command ("这是本轮唯一的系统性混淆源，一条命令就能堵掉").
Mechanism
Battery voltage scales available torque, and torque loss hits behavior asymmetrically (see power-scale-hurts-nonforward-axes), so drain masquerades as policy regression; a head/tail reference pair converts the unobserved drift into a measured control.
Applies when
- comparing two policies or settings on hardware in one session
- any sequential hardware evaluation where the plant drifts (battery, temperature, floor wear)
“为什么要 700 复跑：一次遥控 session 下来电池会掉压，第二枚天然吃亏。头尾各跑一次 700，若两次 700 明显不同，说明这轮 A/B 被电量污染，结论作废重来。这是本轮唯一的系统性混淆源，一条命令就能堵掉。”
train/C_LADDER_RUN.md § 3c. A-3 真机 A/B（同一段地板、同一天、电量记账） Model CAN polling skew - joint observations are 6-9 ms stale by read order
can-timing-skew-modelingIf joints are read sequentially over a shared bus, reproduce the per-group observation staleness in sim (or randomize it over the measured range) - synchronous observations are a privileged fiction.
Symptom
Policies trained with synchronous joint observations degrade on hardware where motors are polled sequentially over CAN - hip data is already 6-9 ms old by the time ankle data arrives.
Context
Menlo's core sim2real finding on a leg platform of almost identical mass to Lucen's. CAN is a sequential bus: one poll cycle reads motors in a fixed order, so the observation vector mixes timestamps. Lucen runs 6:6 motors on a dual CAN split, so the problem transfers one-to-one.
Change
Explicitly model CAN timing skew in sim: give the joint groups different observation delays matching physical read order. Menlo went further - running real firmware in the loop with a motor simulator between MuJoCo and firmware injecting 0.4-2 ms uniformly distributed delay.
Outcome
Reported by the reference team as their core sim2real enabler on a same-scale platform; recorded in Lucen's experience log as directly applicable ("这个问题一模一样").
Mechanism
A policy exploits any cross-joint temporal coherence present in training observations; when hardware breaks that coherence per bus position, the learned feedback acts on inconsistent state estimates, injecting phase error exactly at the control bandwidth.
Conflicts
Second-hand episode: outcome numbers are the reference team's report, not a Lucen-run experiment; Lucen adopted the requirement but the corpus has no Lucen A/B of skew-on vs skew-off.
Applies when
- robot polls actuators sequentially over CAN/RS485 or similar shared bus
- sim2real degradation appears as jitter or oscillation not seen in sim
- designing the observation/delay model before a training run
“电机走 CAN 是顺序轮询的，髋部电机的数据到踝部电机上报时已经陈旧了 6-9 ms，他们直接在仿真里显式建模了 CAN 时序偏斜，按读取顺序给三组关节不同的观测延迟。… 注入 0.4–2 ms 的均匀分布延迟。你们是 6:6 双 CAN 分总线，这个问题一模一样”
Experience.md § 执行器 + 时序建模 (line 6) The shipped checkpoint was chosen by scanning checkpoints on the full gate - neighbours 100 iterations apart failed 1 and 38 cells, late checkpoints degraded - never by taking the last one, and training stopped on signals, not on a schedule
checkpoint-choice-is-a-full-gate-scanChoose a release checkpoint by running the full acceptance battery over a band of checkpoints (including the transfer axis), stop training on measured signals rather than a fixed iteration count, and expect adjacent checkpoints to differ sharply.
Symptom
Gate results moved sharply and non-monotonically between checkpoints of the same run, and the last checkpoint was often not the best.
Context
One-leg V0r1: the 2,000 neighbourhood was best; from 2,500 on the nominal gates degraded (late overtraining); 2,000 itself had one real micro-hop (17.7 mm over 5 frames); 2,300 was all green and shipped. V0r2: failed cells per checkpoint 2,000:19, 2,100:38, 2,200:1, 2,300:3, 2,400:27, 2,500:12, 3,000:18 - 2,200 shipped. The recovery line learned the same from the other side: stopping v2_6 early at a scheduled point left a policy whose re-fall rate had spiked to 9-22% before consolidation healed it ("stop on signals, not on the schedule"), and a continuation's transfer decayed checkpoint by checkpoint while Isaac stayed perfect.
Change
The acceptance rule "scan checkpoints, do not look only at the last one" is written into the one-leg gates (called the S1 discipline); release candidates are chosen from the scan.
Outcome
Both one-leg releases were mid-run checkpoints (2,300 and 2,200) chosen by the full 40-cell battery.
Mechanism
PPO keeps changing the policy after the gates saturate; with no gradient toward the gate's conditions, later checkpoints wander, so gate quality is a noisy function of iteration.
Applies when
- picking which checkpoint of a run to export and stamp
- a run is stopped at a fixed iteration budget
- final-checkpoint results are worse than mid-run smoke tests
“Isaac 侧 S1 纪律: 验收扫 checkpoint，不是只看最后一个。 … 扫描判决: 2000 邻域最优——2500+ 标称面退化（⑤③② 散挂, 晚期过训）, 2000 有一例真微跳（L s100 μ1.2, 17.7mm/5帧）, 2300 全绿。”
git:Lucen V2@origin/oneleg-line:train/ONELEG_V0_SPEC.md § §6 验收门 / §8 核查单 5 与 7 When the training reset distribution changes, freeze the acceptance distribution separately and pin its seed - the same checkpoint measured twice differed by 3.8 and 10.2 points
frozen-acceptance-distribution-and-pinned-seedAcceptance distributions are frozen artifacts, decoupled from whatever the training distribution becomes and evaluated with a pinned seed, and every gate row carries its sample size so that a small-n row is never read as a regression.
Symptom
R0.3 added easier roll-arc start states to the training resets, and the acceptance script shared the training category table; separately, the same checkpoint scored side 3.8 points and mid 10.2 points differently on two runs of the same script.
Context
Acceptance ran 512 parallel envs drawn from the fall categories. Had it kept following the training table, 15% of acceptance samples would have landed on states easier than prone - inflated scores and generations that could not be compared. The two same-checkpoint runs had identical per-item height medians, so the ruler had not changed; the spread was reset resampling noise (side n ~ 169, sigma 2.3%; mid n ~ 35, sigma 8.3%). The spec's "20 seeds" had always meant controlled seeds.
Change
accept_recovery.ACCEPT_CATEGORIES pinned to the four R0-R0.2 categories and decoupled from the training FALL_CATEGORIES; --seed 20260809 pinned, after which two consecutive runs were bit-identical. The mid row (n ~ 35) was labelled the bluntest gate.
Outcome
Every later generation (R0.3 through V3.1) was scored on the frozen distribution and seed, which is what let R0.3's intermediate state be read as "no measurable gain" (62.7 -> 62.1%) and R0.2's mid drop be booked as noise rather than a regression.
Mechanism
An acceptance set that follows the training distribution measures a moving target, and an unpinned reset draw adds sampling noise that small-n rows cannot absorb.
Applies when
- the training reset or command distribution changes between generations
- repeated evaluations of one checkpoint disagree
- a small category drives a pass/fail decision
“**分布冻结**:`accept_recovery.ACCEPT_CATEGORIES` 钉死 §5 四类 … 与训练侧 `FALL_CATEGORIES` **解耦**。 … **side 差 3.8 点、mid 差 10.2 点**(h 中位逐项一致,证明不是尺子变了)—— 纯 reset 重采样噪声 … 钉死后两次连跑逐位相同。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §14 验收尺子的两处加固(R0.3 起生效,向后兼容) Diagnose a behavior failure by enumerating hypotheses and auditing each against the actual config, cheapest first
hypothesis-table-code-auditBefore changing anything, write the full hypothesis list for the symptom and audit each against the resolved config and measured magnitudes, cheapest check first; train only on the survivors.
Symptom
Real robot leaned forward "wanting to walk" but dragged its feet instead of lifting them - a symptom with many plausible causes and no obvious single fix.
Context
Seven hypotheses were listed and each checked against the actual training config files (velocity_env_cfg.py, isaac_values.py), ordered by check cost: missing foot clearance term (CONFIRMED, primary - feet_air_time existed but no swing-height term at all); energy penalties dominating (REJECTED - energy terms total -0.19 vs tracking +1.2, 16%); command range too narrow (CONFIRMED - (0.15,0.35)); nominal pose too crouched / action scale too small (HALF - knee 0.5 rad = 28.6 deg deep, scale fine); mixed PD across motor types (REJECTED - already grouped); missing base-height reward (REJECTED - present at -5.0); height-drop termination (REJECTED - none exists, which itself became finding #4 of the fix list).
Change
The audit produced a ranked fix list (add clearance penalty; widen speed range; reduce nominal crouch) with each rejected hypothesis documented so it would not be re-litigated.
Outcome
Three confirmed causes fixed over v5/v6: swing height went 22-23 mm -> 34 mm, tracking 81% -> 87%; the rejected hypotheses stayed rejected (no wasted rungs on energy weights or PD grouping).
Mechanism
Multi-cause symptoms invite guess-and-train loops; a written hypothesis table forces each candidate to be confirmed or rejected against actual values (not impressions), and cost-ordering the checks means most hypotheses die for the price of reading a config.
Applies when
- a real or sim behavior failure has multiple plausible causes
- the team is about to "try a fix" without an audit
- post-mortems keep re-proposing already-rejected causes
“真机现象:躯干前倾像要走,脚抬不起来(拖着蹭)。按成本从低到高逐条核查 … | 1 | 缺 foot clearance | ✅ 成立,首要 | 有 feet_air_time,无任何摆动足高度项 | | 2 | 能量惩罚压过跟踪 | ❌ 不成立 | 能量类合计 −0.19,跟踪 +1.2,只占 16% |”
train/WALK_DIAGNOSIS.md § walk 拖地问题 — 七条假设的代码核查结果 A real-robot verdict is (policy x deployment stack) - when the stack changes materially, old verdicts expire
stale-verdicts-under-old-stackDate every hardware verdict with the deployment-stack version it was measured under; after any material stack change, re-test before trusting old condemnations or old praises - with the interpretation of each possible result written down first.
Symptom
walk_v5 stood condemned as "kicks wildly" and walk_v6 as "cannot walk unassisted" - but those verdicts were issued under an earlier deployment stack (--heading did not exist yet, several fixes had just landed); only v7 had ever run under the current unified stack.
Context
New sim evidence sharpened the doubt: a same-harness four-version sweep showed v6 was the HEALTHIEST archive at the real operating point (cmd 0.15: dominant frequency locked at 2.50, steps 35:35 perfectly symmetric, foot distance 203/190 mm best of four, mean tilt 4.2 deg, saturation 15%). A full re-test under the unified stack was scheduled with per-version questions and a pre-filled interpretation table ("判读表(预填假设,回来对号)"): e.g. v6 walks + frequency ~2.5 -> old verdict was the stack's fault, v6 becomes the comparison champion; v6 walks but at ~1.25 -> period-doubling on hardware = confirmed plant gap, actuator fitting promoted to mainline; v5 no longer kicks -> the kicking was an old-stack artifact.
Change
All four versions re-queued on hardware under one stack (same torque limits, slew profile, heading loop, logging), with the version-specific legacy profile pinned; verdicts held provisional until re-issued.
Outcome
The re-test design separated policy properties from stack artifacts before any policy was permanently written off - and turned each outcome into a specific conclusion via the pre-filled table.
Mechanism
A deployed behavior is produced by the policy plus everything between it and the motors (heading loop, slew limits, torque caps, clock); verdicts implicitly condition on that whole stack. Fixing the stack invalidates the conditioning, so old failures may be stack artifacts and old successes may not survive either.
Applies when
- deployment tooling (limits, filters, loops) changed since a policy was last judged
- deciding which historical policy is the rightful baseline
- a sim sweep contradicts an old hardware verdict
“只有 v7 在完整的今日部署栈下上过真机 … v5"左右乱踢"、v6"未能自主"的判决全部来自更早的栈(--heading 尚不存在, 部分修复刚落地)——判决已过期。且 2026-08-02 四代同机仿真横测翻出了新证据:v6 在真机工况(cmd 0.15)下是四代里最健康的仿真档案”
train/REAL_SWEEP_V5_V8.md § 0. 为什么重测