Training Coach
Doctrine
A report may cite any of these as doctrine-N.
doctrine-1Contract freeze and fingerprint disciplineThe policy I/O contract (observation layout, scales, history semantics, action pipeline) is frozen and fingerprinted; every exported policy is stamped and verified; contract changes ship as new versioned profiles that leave old artifacts bit-identical, and old policies run forever under their era's pinned profile.
Case. The 215-dim omni contract was frozen with a three-machine digest; the one contract-level extension (lateral feed-forward) went in as a new `omni_ff` profile with the old profile provably untouched, and the contract checker caught two real wiring bugs before any training (`contract-freeze-and-checker`). A silently changed gait-clock default would have fed old policies a 25% slower clock - closed by pinned legacy profiles (`legacy-profile-pinning`). A stale derived USD forked plant mass 2.2% until an automated source-vs-derived instrument gated it (`derived-asset-staleness-check`). A gain profile is part of the closed loop a policy was trained in and belongs in its stamp; the recovery line's anchored authority was left out of its manifest and recorded as the gap not to repeat (`gain-profile-belongs-in-the-stamp`), and a second policy behind a deploy-side switch made the handoff state itself a contract (`recovery-two-policies-and-a-state-machine`, `walk-recovery-fsm-handoff`).
Coach application. On any proposal touching obs/action semantics, defaults, or derived assets: demand the version/profile plan, the fingerprint update, and the checker extension in the same change; flag any old artifact that would run under new defaults.
doctrine-2Attribution by resolved training params - never eval-override knobsCapability differences between lineages are explained only by digging each lineage's *resolved* training configuration and eliminating columns; evaluation-side override knobs (kd-scale, power-scale, cycle-time) act on the plant for *every* policy and may serve as deployment mitigations but never as explanations.
Case. Low-friction robustness across 8 lineages x 3840 cells was traced to kd DR *bandwidth* - every lineage had ground friction pinned to (1.0,1.0), so "trained friction" could not be the axis; the parameter axis and the plant axis were explicitly separated after the first attribution conflated them (`kd-bandwidth-mu-law-attribution`). "Weak turning" on hardware was a power-scale plant effect, not a training gap (`deploy-knob-attribution-before-retraining`); slowing the deploy clock was out-of-distribution, not a feature (`cycle-time-override-is-ood`). The ground truth for what a run trained under is the logged per-run config, not the source tree (`resolved-config-is-source-of-truth`).
Coach application. Whenever asked "why is lineage A better", require the resolved-param table first; kill zero-variance columns; refuse explanations phrased in eval-knob terms; when a knob helps, label it deployment mitigation.
doctrine-3PASS gates become constraints; FAIL gates become objectivesOnce a skill passes its gate, that gate converts into a standing regression constraint (budget <= 2/20 against the parent baseline) for all later training; gates currently failing are the only legitimate objectives of the next rung.
Case. The C ladder ran one frozen 13-cell x 20-seed matrix at every rung with promotion = "new skill PASS and old skills within regression budget"; C1 was stopped and re-rooted precisely because it trained away the root's backward PASS (`fixed-acceptance-matrix-per-rung`, `preregistered-stop-criteria-per-rung`). The C4 product shipped only at 260/260 cells with zero regression.
Coach application. Keep the ledger: every PASS adds a constraint row; propose rungs only against FAIL rows; treat any constraint violation as stop-and-attribute, never "the next rung might win it back".
doctrine-4One variable per ladder rung - counted against what the checkpoint sawA rung changes one variable, where "one" is counted against the checkpoint's actual training state, not against the current config's diff; batching is allowed only when each change owns a disjoint symptom space with a pre-registered ablation order.
Case. Two rungs failed identically because resuming s1e-500 under the evolved config silently added four plant variables the checkpoint had never seen ("单变量纪律不只看「我改了什么」,还要看「checkpoint 见过什么」" - `resume-state-dr-audit`). v8 legally batched four orthogonal fixes with a written ablation order (`orthogonal-batch-with-ablation-order`); v9 spent one run completing a 2x2 factorial so either outcome convicted a factor (`fill-the-missing-factorial-cell`); v10b's three-way ablation wrongfully convicted the clock and had to be retried fairly.
Coach application. Before any resume: diff cfg against the checkpoint's logged training state. Before any batch: require the symptom-ownership map and ablation order in writing.
doctrine-5Pre-register risks, readings, and stop criteria before the ladderBefore a ladder or risky rung, write down the known risks, the interpretation of every plausible outcome, and hit-any-one stop criteria - frozen before training, tightened when priors say results should come fast.
Case. The C ladder opened with three numbered risks including the exact falsification condition for its own root choice; A/B arms carried "预注册读法(事后不改)" tables; a level expected to fail was run anyway for its pre-registered diagnostic value (`preregister-risks-and-fork-readings`). Stop criteria caught C4-redo rungs at +200 instead of full caps (`preregistered-stop-criteria-per-rung`); hardware sessions pre-registered per-config expected signatures and the disagreement rule "不改结论改账" (`preregistered-real-expectations`, `feasibility-accounts-lock-design-point`).
Coach application. Refuse to open a rung without the written risk/reading/ stop block; after results, read conclusions off the pre-registered table and flag any post-hoc reinterpretation.
doctrine-6Plant parameters are measured, never inventedEvery plant number carries measurement provenance: armature = N^2 x rotor inertia from no-load tests, friction split by rig and by API column, torque limits shaped by per-joint gait peaks, latency traced through the real pipeline, masses weighed - and DR bands are additive around the measured nominal, sized to the measured dispersion.
Case. Guessed friction was 2.5x low and guessed damping 5x high (`friction-measured-not-guessed`); armature had been 0 with a 9:1 gearbox (81x reflected inertia, `armature-n2-rotor-inertia`); a uniform torque derating was "the wrong shape" vs measured peaks (`torque-limit-shape-by-measured-peaks`); the delay implementation itself was a wrong plant for a whole lineage (`latency-lerp-reverse-extrapolation`); the run design point was locked by three accounts including the tau_limit/kd speed ceiling (`feasibility-accounts-lock-design-point`); identified friction had to land in the right simulator API columns to act at all (`sim-api-friction-columns`). The recovery and one-leg lines opened with the same kind of accounts before any reward existed - a connected static path and the torque along it for an armless get-up, and the gains single support needs to be holdable at all (`get-up-feasibility-accounts-before-training`, `single-support-gain-authority-probe`).
Coach application. For any plant value in a config review, ask "measured how?"; reject absolute ranges with no nominal; check API column mapping and derived-asset regeneration whenever measured values land.
doctrine-7Sim2sim gate before sim2real - under deployment conditionsEvery checkpoint passes a second, independently built simulator before hardware, and both the gate and the smoke loop run under the measured deployment conditions (real pipeline delay, honest contact parameters, the deployment gain/power profile).
Case. The standing order "先sim2sim 再sim2real" (`sim2sim-gate-before-sim2real`); acceptance flipped to match hardware only under measured condim/torsional friction (`eval-plant-honesty-contact-params`); gates moved permanently to `--delay 2` after the kicking incident (`pipeline-latency-is-plant-not-dr`); and the harness itself must be audited - a frame-convention bug in the cross-sim evaluator invalidated a whole line of verdicts (`body-frame-velocity-api-audit`). The recovery line's second simulator caught a torque penalty paid for by bracing the legs together (`torque-penalty-bought-by-leg-bracing`), and a 1.8x torque disagreement between the two plants stayed binding because its one surviving explanation was never tested (`torque-disagreement-between-simulators-unresolved`).
Coach application. Block any hardware request lacking a second-sim PASS at deployment conditions; when sim2sim and training-side metrics disagree, treat the evaluator as a suspect too.
doctrine-8Observation honesty - the actor's inputs are a hardware contractThe actor observes only signals the real robot produces with realistic noise; privileged truths go to the critic; history windows are estimators and must train under plant variation; rewards on quantities the actor cannot observe buy only average suppression, never closed-loop correction.
Case. Ground-truth velocity/forces went critic-only (`observation-honesty-critic-only`); frame_hist under zero DR memorized the trainer's plant fingerprint - 0/20 transfer (`history-obs-needs-plant-variation`); world-frame yaw rewards could not teach pull-back because heading is unobservable to the actor - correction was routed to the deploy outer loop instead of breaking the contract (`reward-observability-limit`, `deploy-heading-loop-and-align-training`).
Coach application. Audit every actor-obs element for hardware existence; require minimal plant jitter whenever history/recurrence exists; for each reward, ask "can the actor see this error?" and route correction tasks to outer loops.
doctrine-9Reward economics are audited in realized currencyReward design decisions are made on realized per-step magnitudes under the actual policy and command distribution: price the do-nothing optimum before adding a mode, compare achieved values to the computed ignore-floor, calibrate thresholds between measured healthy and sick distributions, and ship every new penalty with a withdrawal clause.
Case. feet_air_time at weight 2.0 realized 0.038 vs tracking 1.2 - drag was rational (`realized-contribution-audit`); ignoring a vy command cost 28-180x less than ignoring vx until a gated tracking term was added (`reward-cost-of-ignoring-audit`, `gate-new-reward-terms-by-command`); achieved-vs-floor separated "never learned" from "priced out" (`ignore-floor-diagnosis`); the foot-distance wall was placed between measured healthy (0.6% tax) and sick (55%) policies (`calibrate-threshold-between-healthy-and-sick`); the landing penalty carried a pre-registered stand-down condition and actually stood down (`calibration-threshold-with-withdrawal-clause`); two clearance terms were inert until zero-points and gate occupancy were checked (`inert-reward-term-audit`). A get-up policy sat because three gated terms paid the seated pose 84% of the return and the one term that could tell sitting from standing was an exp kernel reading 4.6e-5 at the real error (`seated-basin-dead-exp-kernel`); a torque-tail term was weighted by its measured steady value beside a peer term after the estimate proved 12x off (`tail-torque-needs-hinge-on-computed-demand`).
Coach application. Never discuss weights in the abstract: demand the realized-contribution table, the ignore-floor number, and the healthy-pay calibration before any reward edit is approved.
doctrine-10The zero-cost option must be the desired behaviorFor every penalty, name what the zero-cost option is; penalize failure events (slip, saturation excess, contact in flight windows), never the motion or joints that healthy behavior uses; make degenerate strategies fatal via termination where penalties cannot price them out.
Case. Joint-usage penalties for drift taxed a 1.4%-of-momentum channel 2.7/step and collapsed training; the slip penalty costs a non-slipping gait exactly zero (`penalize-the-slip-not-the-joint`). A frozen-at-clamp joint pays zero action-rate forever - only a pre-clip saturation penalty flips the cheat economics (`saturation-cheating-zero-rate-cost`). Ungated phase shaping made standing 42x more expensive than stepping and cooked the hip motors (`moving-gate-42x-stand-tax`); crouch-shuffling lived until a height termination deleted it (`termination-closes-degenerate-basin`). A gated penalty is an exit: the policy parked just outside an uprightness gate, then just under a height gate, to stop paying a stance tax, and only a positive band plus an always-on guard closed both (`penalty-gate-is-an-escape-hatch`); a soft-limit penalty that charged the standing pose itself bought a 4.1 deg lean (`soft-limit-penalty-charges-nominal-pose`); an unpriced foot attitude was spent on edge-standing (`unpriced-foot-attitude-is-a-free-variable`); and the one-leg line listed its cheapest cheats before training and still met one through a zero-gradient band (`enumerate-cheapest-cheats-before-training`, `binary-band-reward-fake-touchdown`).
Coach application. Run the "零代价的选项是什么" audit on every proposed term; convert motion taxes into event-conditional penalties; check the termination set against each known degenerate strategy.
doctrine-11Measurement discipline: independent referees, signs, distributionsA disputed measurement is adjudicated only by an independent algorithm from raw state; directional ability requires sign-antisymmetry under command reversal; bimodal metrics are reported as mode shares (never medians, never 3 seeds); ratios are not comparable when totals change; reward values compare only within one command distribution; single chaotic events never cross machines.
Case. The triple reversal - a good metric was "refuted" by a sibling metric that shared the disease (`independent-referee-for-metric-disputes`, `body-frame-velocity-api-audit`); same-signed +/- responses were bias, not turning (`same-sign-response-is-yaw-bias`); the swing median sat in a bimodal gap (`median-hides-bimodal-distribution`); "v6 is jitterier" died on absolute energies (`ratio-metrics-need-absolute-check`); yaw gain measured 15x wrong in an oscillating frame (`heading-integral-not-body-rate`); a 44% improvement evaporated under same-distribution comparison (`same-distribution-reward-comparison`); drift direction was a limit cycle (`multiseed-sign-test-for-drift`); a cross-machine push cliff was chaos (`single-impulse-recovery-is-chaotic`).
Coach application. Before accepting any surprising number: ask for the independent recomputation, the sign pair, the distribution shape, and the comparison conditions. Retract in writing when a metric falls.
doctrine-12The deployment pipeline is plantIrreducible pipeline properties - action latency, rate limits, power/torque scaling, teleop command mappings - are part of the nominal plant, modeled from day one and reproduced in every gate; deploy-side scalings are crutches that flag unmodeled plant, and they cannot be algebraically folded into training constants.
Case. Right-leg kicking was over-trained-delay x loop gain; power 0.8 was a gain-reduction crutch that retired when the delay was modeled (`pipeline-latency-is-plant-not-dr`); power derating damages non-forward axes first (`power-scale-hurts-nonforward-axes`); training at 0.4 scale as the "twin" of deploying 0.5 x 0.8 collapsed 0/20 (`deploy-scaling-not-training-equivalent`); one shared teleop speed sent an out-of-band lateral command and the robot clipped its own foot (`teleop-command-band-per-axis`); the latency DR range had not even covered the measured pipeline (`latency-dr-covers-measured-pipeline`). A rate limiter added at deployment only clipped a policy that kept commanding (`deploy-rate-limiter-windup`); moved into training and anchored on the last command it became an integrator in the balance loop (`slew-anchor-is-an-integrator`); anchored on the measured angle it bounded torque and kept the bandwidth (`beta-anchored-action-target`). The walking lines' safe setting, power-scale 0.8, cut the ends of the recovery policy's full-range travel and left its spikes alone; a gain inside the trained band did the job (`power-derating-cuts-full-range-contract`).
Coach application. Demand the measured pipeline latency/limits in the plant model and in gate conditions; treat every deploy-side derating as a question ("what is this compensating?"); block per-axis command sources that exceed training bands.
doctrine-13DR budget is finite; its distribution is the measured supportRobustness is a conserved budget: disturbance training on an already-hardened lineage borrows from existing margins; DR ranges span the measured deployment support - no fictitious tails (they buy degenerate gaits), no single constants (they allow thin-margin specialization); harden the plant only after the task distribution is final.
Case. The same push dose helped a narrow lineage and damaged a balanced one - budget conservation (`push-dr-conditional-budget-conservation`); wide latency tails bought drag-glide, constant values shipped 60% thinner tilt margins - the answer is a narrow band on the measured support (`dr-tail-plant-continuation`, `constant-value-dr-overfits-margin`); task-first ordering because hardening a soon-to-change task wastes budget (`task-shaping-before-plant-hardening`); COM randomization used deliberately as a behavior-shaping tool, and rolled back on symptom per its own contract (`com-randomization-forces-leg-spread`, `com-dr-rollback-on-symptom`). DR that is switched on can still be thin: the run policy fell in the frontal plane its gain-and-latency randomization never touched (`thin-dr-judged-by-channel-coverage`), and a friction priority settled under one action contract had to be re-measured under the next (`friction-priority-re-measured-after-plant-change`).
Coach application. Before any DR rung: check the untrained policy against the spec, the lineage's current DR load, and the measured real-world range; after it: audit retained margins, not just the new tolerance.
doctrine-14Gates measure what hardware feels: posture, margins, stripped assistsAcceptance batteries carry posture-class rows (tilt max median, per-joint L/R asymmetry, temperature) beside task rows, graded margin columns beside binary gates, chirality scored per side, at least one condition that removes the environment's free stabilization, and validated predictive scalars promoted into the gate.
Case. Three same-shaped judging errors - survival, displacement, wz-difference - all missed what the operator felt; posture metrics had the predictive power (`task-metrics-vs-posture-metrics`, `stand-gate-posture-not-survival`); binary survival saturated and hid a 60% margin gap (`constant-value-dr-overfits-margin`); v5 passed everything on the ground and failed suspended (`suspension-probe-removes-free-stabilizer`); the hip_roll (l+r) scalar predicted real drift direction and ordering and entered the battery (`hip-roll-sum-predicts-lateral-drift`); averages hide chirality (`chirality-scored-separately`); gait-quality gates are judged at speeds that demand a gait (`low-speed-commands-reward-dragging`). The recovery line added the rest of the kit: where failed episodes end, not only where they started (`end-state-confusion-matrix`); a frozen acceptance distribution with a pinned seed (`frozen-acceptance-distribution-and-pinned-seed`); video of the metric rollout itself (`video-as-acceptance-record`); and the admission that a 10 s episode cannot see a stance that fails after a minute (`episode-length-bounds-what-a-gate-sees`). The one-leg line removed a foot-spacing wall that no gate measured, and the feet met on hardware (`removed-wall-returns-on-hardware`).
Coach application. Review every battery for posture rows, margin columns, per-side scoring, and an assist-stripped condition; when operator feel and gates disagree, suspect the metric class first.
doctrine-15Fork and root selection: recoverability, maturity, frozen rewardsChoose fork roots by which candidate's deficits the coming training can pay back (precision is recoverable; lost plasticity, symmetry, and margins are not); prefer mature checkpoints as roots even when younger ones score better as products; never fine-tune through a reward change - continuation is legal only with the reward frozen and plant/DR widening one rung at a time.
Case. s1e-500 beat higher-precision candidates because its exclusive strengths were unrecoverable (`fork-root-recoverable-shortfall`); the b300 arm proved maturity is capital against adaptation shock (`root-maturity-vs-product-quality`); the B-arm scatter/half-recover/collapse signature falsified reward-change fine-tuning and drew the legal boundary for S2 continuation (`fine-tune-reward-change-falsified`).
Coach application. For root debates, build the exclusive-strengths table and ask "which side can be trained back?"; require dual-arm evidence for maturity claims; classify any proposed continuation as reward-frozen or not before approving.
doctrine-16Curricula: verified engagement, lineage counters, disease-phase gatingAutomatic curricula must prove they engage (a saturated ratchet is constant DR wearing a curriculum's name); every ramp counts lineage-cumulative progress, not per-process steps; penalties aimed at late-stage pathologies ramp in after exploration noise decays; difficulty rises on measured per-stratum success, never on schedule.
Case. The s1f ratchet capped at iter 248 and never engaged (`auto-curriculum-engagement-check`); the saturation ramp re-fired at +600 after every resume and no shipped product ever saw the penalty (`curriculum-counter-lineage-steps`); the same penalty worked once gated to the disease phase and became an untouchable mechanism (`gate-penalties-to-the-disease-phase`); record-high aggregate reward hid a fully-failing delay stratum (`aggregate-metrics-mask-subgroup-failure`); bucket share is not a gradient lever (`bucket-share-is-not-a-gradient-lever`). An assist curriculum keyed to a pooled success share was withdrawn on the strength of the categories that already worked (`curriculum-criterion-conditioned-on-lagging-category`); a pace set by per-step income moved only when that income was time-gated (`per-step-income-drives-speed-time-gate`), and the same gate had to be retired in a lineage without the disease (`time-gate-vs-wide-stance-retire-the-fix`).
Coach application. Ask every curriculum three questions: does it engage (show the internal state)? what does it count (process or lineage)? when is it present (against the pathology's phase)? Check where shipped checkpoints sit relative to every ramp.
doctrine-17Probe before training: feasibility first, hypotheses in tablesAfter two failed training attempts at a skill, stop training: demonstrate the behavior open-loop, enumerate hypotheses in a written table audited against actual configs cheapest-first, race one probe per side of the sim2real boundary for hardware-only pathologies, and use suspended tests to acquit or convict actuators before blaming authority.
Case. "在黑暗里试钥匙" - four sidewalk rungs failed until an open-loop probe separated exploration/waveform/authority in one experiment (`open-loop-probe-before-reward-tuning`); the foot-drag mystery fell to a seven-hypothesis config audit (`hypothesis-table-code-audit`); the period-doubling was resolved by racing a reward-side and a plant-side evidence line - and both paid off, one per sub-case (`period-doubling-evidence-race`); the suspended test acquitted the roll actuator in one measurement (`suspended-test-isolates-actuator-authority`). A read-only configuration probe told a wall from a slope in the recovery line's seated basin (`configuration-probe-wall-not-slope`), and the fix it pointed to - where the feet are - took prone from 0/159 to 158/159 (`prone-dead-end-is-foot-placement`); a knob that did not move its variable was recorded as no test of the idea (`dof-vel-penalty-is-not-a-pacing-knob`).
Coach application. When a skill resists training, prescribe the probe before any further reward edits; require verified target trajectories before imitation terms; keep a falsified-fixes list so closed roads stay closed (`amplitude-cut-falsified-yaw-fix`).
doctrine-18External advice is recomputed locally; values transfer as ratiosEvery external suggestion is classified adopt / already-have / modify / trap by recomputing its claim on the local reward table and probe data; numeric values transfer only as dimensionless ratios (to tracking weight, leg length, sqrt(gL), control rate); citations are verified to exist.
Case. "Start vy very small" would have destroyed sidewalk learning on this reward table - the gradient scales quadratically (`external-advice-audit-against-own-arithmetic`); swing-height targets and weights transferred correctly only through leg-length and tracking-ratio scaling (`transfer-ratios-not-absolutes`); the "6-step delay" was refused for lacking a control rate (`latency-dr-covers-measured-pipeline`); a borrowed reference's structure was FK-verified and its amplitude re-derived from the division of labor (`reference-structure-fk-amplitude-division`); retrieval agents fabricated verbatim arXiv quotes - only source-verifiable material was used; and one dismissed suggestion later proved right for a different mechanism, and was credited (`cycle-average-tracking-for-gait-quantities`). An advisor's staged state machine turned out to exist in none of the three papers it cited, and reading them changed the plan (`advisor-paraphrase-vs-paper`).
Coach application. Intercept every "paper X does Y" with the local recomputation; convert absolutes to ratios before comparison; verify quotes; revisit dismissed advice when new mechanisms appear.
doctrine-19Hardware sessions are scripted experiments, not tuning sessionsReal-robot time executes a pre-registered matrix: risk-ordered (baseline first, fragile last with a spotter), stage-gated (suspended smoke before ground), A/B sessions bracketed by a repeated reference run, operators briefed on measured zero-command and untrained-axis behavior, chirality-aware disturbance protocols, no field tuning - the only legal field changes are scripted, single-variable, and self-reversing.
Case. The S2 acceptance sheet (`risk-ordered-real-deployment`, `battery-bracketed-real-ab`, `know-zero-command-behavior`, `push-test-chirality-protocol`, `no-field-tuning-protocol`); the RAM-only torque experiment with automatic power-cycle rollback (`reversible-single-variable-field-experiments`); and the sim-veto rule - even sim's condemnations get one safeguarded hardware check when they judge the purpose-built configuration (`sim-veto-needs-real-confirmation`). The recovery line's first real run went ahead with its preconditions unmet and was stopped as dangerous (`first-real-get-up-violent-stage-one-policy`); after it: a staged hang, mat and floor protocol (`staged-hang-mat-floor-for-get-up`), a fixed power-cycle pre-flight and two-machine discipline (`power-cycle-preflight`, `two-machine-config-discipline`), a fall guard replaced rather than switched off (`fall-guard-becomes-a-state`), and logs that are part of the run (`hardware-log-is-the-attribution-input`).
Coach application. Turn every hardware request into a runbook with order, gates, brackets, briefing, and anomaly plays; refuse improvised parameter changes on the floor.
doctrine-20Close questions in writing; restart when the debt is structuralAudited questions get frozen verdicts with citable wording and an explicit reopening bar; hardware verdicts are dated by deployment-stack and calibration state and expire when those change; and when successive rungs shuffle symptoms without net progress, freeze the lineage as regression baselines, pay the structural debts, and retrain minimal - carrying laws and instruments, not weights.
Case. The chirality and COM questions were closed with frozen wording and "no reopening without new hard evidence" (`frozen-verdicts-semantic-boundaries`); v5/v6's condemnations expired with the deploy stack (`stale-verdicts-under-old-stack`); a 2-degree calibration fix moved the whole runnable envelope (`zero-offset-calibration-shifts-envelope`); plant upgrades are era boundaries with paired re-baselining (`plant-swap-invariants-vs-shifts`); and the 2026-08-05 reset froze v5-v11, fixed the latency FIFO / manifest / sampling / reward-table debts, and restarted - producing the lineage that reached hardware SOTA (`freeze-lineage-fix-structure-restart`, `minimal-reward-table-with-provenance`). The recovery line's real-robot verdicts ended up in three places that disagree, one of them an undated note in a command file (`write-hardware-verdicts-back`).
Coach application. Maintain the closed-questions ledger and quote it when symptoms recur; stamp verdicts with stack/calibration versions; when a team is three rungs into symptom-shuffling, raise the restart question explicitly with the freeze-fix-restart pattern.
doctrine-21Name the quantity in the space it lives inA goal, reward term or acceptance criterion about the feet, the base or the contact state is computed from the quantity itself - world poses, forces, per-category outcomes - never through a joint-angle, single-signal or pooled stand-in that assumes everything else sits at nominal; and every detector is validated on a behaviour known not to contain the event before it becomes a gate.
Case. The recovery line was caught three times: |ankle roll| as "flat feet" sold stance width and the real robot slid into the splits, a hip-roll criterion was confounded by 50 deg of yaw, and the joint table said 0.271 m where the feet were 0.159 m apart; task-space terms produced the first flat, wide stance (`joint-space-proxy-for-task-space-quantity`). Flight detection lied in both directions across two lines - foot height flagged 40% false flight on a walking gait, contact force alone flagged slip chatter as hops (`contact-detector-single-signal-lies`). A pooled height average described a robot that did not exist - six in ten standing, four in ten sitting (`zero-partial-credit-is-not-an-iteration-problem`) - and the walking line had learned the same lesson on yaw rate (`heading-integral-not-body-rate`).
Coach application. For every reward term and gate row, ask what physical quantity it stands for and whether it is measured directly; flag joint-space or single-signal stand-ins for task-space goals, ask for a detector validated on a negative control, and split pooled metrics by category before reading them.
doctrine-22Continuation needs a live gradient; a release is chosen by a scanContinue a converged policy only on a change that creates a live gradient, on a short budget, with every checkpoint scanned on the transfer axis; choose a release by running the full battery over a band of checkpoints and stop on signals, never by taking the last one; and when edits to the terminal phase cannot move a behaviour, roll back and retrain with the constraint present from the start, keeping the order in which the lineage acquired its mechanisms as explicit curriculum phases.
Case. A continuation with no new gradient drifted MuJoCo transfer from 100/98% to 80/28% while every Isaac gate stayed perfect, and a live-gradient continuation at the same depth kept it (`converged-continuation-is-poison`). One-leg checkpoints 100 iterations apart failed 1 and 38 of 40 cells, and late ones degraded (`checkpoint-choice-is-a-full-gate-scan`). Four in-lineage stance fixes failed because the stance was the end of the get-up path, and from scratch it grew right (`stance-decided-by-get-up-path`); fixes stacked on degraded states were rolled back by the user (`stop-stacking-roll-back-and-audit`); and the lineage's final recipe, trained from scratch in one run, sat at 0% because the order of its curriculum was part of the product (`curriculum-history-is-part-of-the-product`). The omni line's short adaptation budgets and mature roots are the same law seen from the other side (`continuation-budget-not-from-zero`, `root-maturity-vs-product-quality`).
Coach application. Before approving a continuation, ask for the new gradient, the budget and the transfer axis in the scan; before approving a release, ask for the scan; after three rungs without progress on the target, propose rolling back to the last good checkpoint and a from-scratch phase plan instead of a fourth patch.
Experience cards
58 cards matching “derived-asset-staleness-check”.
The trainer read a stale USD after the URDF mass update - regenerate derived assets and gate on an automated equality instrument
derived-asset-staleness-checkFor every derived plant artifact (USD from URDF, generated value files), pair the generation step with an automated source-vs-derived equality instrument, prove the instrument can fail, gate training on its PASS, and re-run physical audits after every regeneration.
Symptom
Measured link masses had been committed to URDF/MJCF (total 9.58 -> 9.792 kg, weighed values), but Isaac reads the derived USD asset - which still carried the old masses: a silent 2.2% mass fork between the training plant and the evaluation plant.
Context
The v12 checklist made USD regeneration a hard precondition ("硬性 前置") and, crucially, backed it with an instrument: check_usd_mass.py compares USD vs URDF per-link mass AND inertia trace, validated by showing it FAILs the stale asset naming 9 offending links, then PASSes after re-conversion (13/13 links consistent, total 9.7920). The self-collision filter audit was re-run after the regeneration (three poses, 0.00 N) because a regenerated asset invalidates physical audits done on the old one. This milestone was also where the three plants first aligned: "三边 plant 首次对齐(armature+摩擦+ 实称质量)就在这一代".
Change
convert_urdf re-run on the training machine, regenerated asset committed, check_usd_mass.py PASS required as an acceptance gate for the generation; dependent audits repeated post-regeneration.
Outcome
The 2.2% plant fork was closed before it could distort a generation's acceptance numbers; the staleness class of bug now has a permanent detector instead of a memory.
Mechanism
Source-of-truth edits do not propagate to derived binary assets by themselves; any consumer reading the derivative silently trains or evaluates on the old plant. An automated equality check between source and derivative - proven able to fail - turns an invisible staleness into a red gate, and regeneration invalidates every audit performed on the old artifact.
Applies when
- editing masses/inertia/geometry in URDF or MJCF sources
- a trainer or evaluator consumes converted/derived assets
- plant numbers differ between simulators for no visible reason
“25ba997 把连杆质量更新为实称值(总重 9.58→9.792 kg,URDF/MJCF 已改),但 Isaac 读的是 train/assets/laika_v2.usd —— 仍是旧质量。… 否则 Isaac(9.58)与 MuJoCo(9.79)质量分叉 2.2%,v12 验收数字失真。验收门:python tools/check_usd_mass.py 必须 PASS … 对旧资产实测 FAIL/9 连杆点名,仪器已验证”
train/WALK_V12_SPEC.md § 7. 核查单 (⚠️ 先重转 USD) Changing the gait clock silently flipped a hardwired threshold's meaning - write derived constants as expressions
derived-constants-must-track-their-baseBefore changing any base parameter (clock, control rate, scale), enumerate every constant derived from it and every constant that must NOT change; convert derived literals into expressions of the base so the next change cannot silently flip a term's meaning.
Symptom
Slowing the clock 0.40 -> 0.50 s would have silently inverted the feet_air_time threshold's semantics: the 0.25 s threshold was hardwired, so at ct 0.40 the swing window (~0.20 s) sat below it (constant pressure to lengthen strides), while at ct 0.50 the window (~0.25 s) equals it - the term's meaning flips from "push longer" to "neutral" with no code error anywhere.
Context
The clock change audit walked every dependent quantity: most followed automatically (joint_pos_ref / clearance / contact_number cycle_time params, gait_phase observation, deploy/sim2sim/policy_io, export) - wiring confirmed, zero hand edits; the air_time threshold was the one hardwired constant, fixed by preserving the RATIO: 0.25 -> 0.3125 = 0.625 x ct, with the recommendation to commit it as the expression 0.625*ct "一劳永逸" (solved once and forever). The same audit also listed what must NOT follow the clock (50 Hz control rate, physics dt/decimation, 47-dim contract, action_latency absolute seconds, PD/torque limits) - the change's blast radius stated in both directions.
Change
feet_air_time threshold re-expressed as a fraction of cycle_time; auto-following vs must-not-change lists written into the spec for the clock migration.
Outcome
The clock migration (v10, repeated in v11) carried no silent semantic flips; the expression form removed the trap for every future clock change.
Mechanism
Constants derived from a base parameter encode a ratio at their birth; storing the evaluated number severs the dependency, so changing the base leaves stale semantics with no failing test. Expressions preserve the intent; and an explicit both-directions dependency list (follows / must-not-follow) is what makes a base-parameter change reviewable.
Applies when
- changing gait clock, control frequency, or units
- a reward threshold interacts with a phase/window duration
- config audit finds literals that encode ratios
“feet_air_time 阈值 0.25 是写死的,不跟 ct 走——0.40 时摆动窗 ~0.20s<0.25(恒拉长压力),0.50 时摆动窗 ~0.25s≈阈值(语义翻转)。按比例保原压力:0.25 → 0.3125(=0.625×ct;建议直接写成 0.625 * ct 表达式,一劳永逸)。”
train/WALK_V10_SPEC.md § 3. T —— 慢时钟 (训练侧必做一件) Every power cycle starts with the same read-only pre-flight - read the buses, check the torque limits against 12/17/11, verify the IMU axes, check the ports after any new USB device - and any reassembly re-measures the joint zeros
power-cycle-preflightStart every powered session with a fixed, read-only pre-flight - bus responses, torque limits equal to the simulated ones, IMU axes, device identities - and re-measure joint zeros after any mechanical reassembly before running a policy.
Symptom
Hardware state drifts between sessions in ways no policy can see: a motor that stops answering after a power cycle, a torque limit that differs from the one simulated, an IMU axis flipped, two USB devices swapping identities, a joint zero moved by reassembly.
Context
The runbook's session order before any policy runs: read every motor on both CAN buses without enabling them (the first command after every power cycle); set_torque --check, all twelve motors must read 12/17/11 N*m, and any difference is written back; imu_reader --verify-axes, where the operator tilts the robot forward and to the right and every check must pass before continuing; check_ports after plugging in any new USB device (the IMU and a CAN adapter once collided on USB identity). After re-mounting motors: read the buses, then re-measure the calibration offsets (three repeats, written back) - "skipping it means running everything on the wrong zero". Hanging checklists repeat the torque-limit check (the deploy script also self-checks at start).
Change
A fixed, read-only pre-flight run in the same order every session.
Outcome
The runbook records one earlier hardware check in the same spirit: all 12 motors' implied kp fell within 18.4-22.0 for a commanded 20, inside the kp randomization range used in training.
Mechanism
A policy transfers only if the plant matches the one it was evaluated on; the pre-flight turns silent hardware drift into a failed check before the robot moves.
Applies when
- the first command after powering a robot on
- after swapping adapters, cables or motors
- a policy that worked last session suddenly behaves differently
“python tools/set_torque.py --check # 12 颗应全对 12/17/11, 有 diff 就 --write … 插任何新 USB 设备后都先跑一次 check_ports.py(IMU 和 CANable 的 USB 身份撞过车) … python tools/calib_stance.py --repeat 3 --write # 重标 offset —— 8/9/10 重新装, 机械零位变了”
RL系统/FOLLOW THIS copy 2.md § WALK / STAND 每次开始前 / 换CAN / 装回后必做两件 Model CAN polling skew - joint observations are 6-9 ms stale by read order
can-timing-skew-modelingIf joints are read sequentially over a shared bus, reproduce the per-group observation staleness in sim (or randomize it over the measured range) - synchronous observations are a privileged fiction.
Symptom
Policies trained with synchronous joint observations degrade on hardware where motors are polled sequentially over CAN - hip data is already 6-9 ms old by the time ankle data arrives.
Context
Menlo's core sim2real finding on a leg platform of almost identical mass to Lucen's. CAN is a sequential bus: one poll cycle reads motors in a fixed order, so the observation vector mixes timestamps. Lucen runs 6:6 motors on a dual CAN split, so the problem transfers one-to-one.
Change
Explicitly model CAN timing skew in sim: give the joint groups different observation delays matching physical read order. Menlo went further - running real firmware in the loop with a motor simulator between MuJoCo and firmware injecting 0.4-2 ms uniformly distributed delay.
Outcome
Reported by the reference team as their core sim2real enabler on a same-scale platform; recorded in Lucen's experience log as directly applicable ("这个问题一模一样").
Mechanism
A policy exploits any cross-joint temporal coherence present in training observations; when hardware breaks that coherence per bus position, the learned feedback acts on inconsistent state estimates, injecting phase error exactly at the control bandwidth.
Conflicts
Second-hand episode: outcome numbers are the reference team's report, not a Lucen-run experiment; Lucen adopted the requirement but the corpus has no Lucen A/B of skew-on vs skew-off.
Applies when
- robot polls actuators sequentially over CAN/RS485 or similar shared bus
- sim2real degradation appears as jitter or oscillation not seen in sim
- designing the observation/delay model before a training run
“电机走 CAN 是顺序轮询的，髋部电机的数据到踝部电机上报时已经陈旧了 6-9 ms，他们直接在仿真里显式建模了 CAN 时序偏斜，按读取顺序给三组关节不同的观测延迟。… 注入 0.4–2 ms 的均匀分布延迟。你们是 6:6 双 CAN 分总线，这个问题一模一样”
Experience.md § 执行器 + 时序建模 (line 6) A ratio metric flipped the verdict - spectral share rose while absolute high-frequency energy fell 16%
ratio-metrics-need-absolute-checkNever compare share/percentage/centroid metrics across conditions whose totals differ; pair every ratio with its absolute numerator before issuing a verdict, and log retracted judgments so they are not re-derived.
Symptom
walk_v6 was provisionally judged "more jittery" than v5 because the joint-velocity spectral centroid rose 2.91 -> 3.62 Hz and the >4 Hz energy share rose 12.6% -> 17.8%.
Context
Absolute measures said the opposite: first differences of actions fell 1.54 -> 1.31, second differences 2.55 -> 2.19, and absolute high-frequency energy fell 16% (0.490 -> 0.413). The shares and centroid rose only because low-frequency content fell even more - the denominator shrank. The interim judgment was retracted in writing so it would not be reused.
Change
Metric discipline noted: "占比类指标在总量变化时不能直接比较" - share/ratio metrics are not comparable across conditions when the total changes; verdicts about smoothness must cite absolute energies or difference norms.
Outcome
v6 correctly classified as smoother, not jitterier; the retracted judgment logged under "被推翻的一个中间判断(记下来免得复用)".
Mechanism
A ratio confounds numerator and denominator; any intervention that removes low-frequency content raises every high-frequency share without adding a single joule of jitter. Only absolute quantities support cross-condition comparison when totals move.
Applies when
- comparing smoothness/jitter/spectral metrics across versions
- any percentage-based metric moves after an intervention
- writing an eval report that includes normalized quantities
“我一度说"v6 动作更抖" … 错了: 动作一阶差 1.54→1.31、二阶差 2.55→2.19 都在降 … 谱质心升高只是因为低频成分掉得更多, 绝对高频能量实际下降 16%(0.490→0.413)。占比类指标在总量变化时不能直接比较。”
train/WALK_DIAGNOSIS.md § 过程中被推翻的一个中间判断(记下来免得复用) Freeze the deployment contract, stamp every export, and let an automated checker catch wiring bugs
contract-freeze-and-checkerFreeze and fingerprint the policy I/O contract; ship contract changes as new versioned profiles that leave old artifacts bit-identical; and extend the automated contract checker with every pipeline change, forcing the new path to execute in the check.
Symptom
Contract-level changes (observation layout, action pipeline) are where silent sim/real divergence is born; two real wiring bugs appeared the one time the action pipeline was extended.
Context
The 215-dim observation contract was frozen ("纪元 3，三机 digest" - an era number plus a digest agreed across three machines); proposals that would break it (e.g. a GRU memory) were rejected on contract grounds. Every exported ONNX is stamped and verified with a manifest (onnx_manifest --stamp / --verify), and deployment refuses mismatched combinations. When C4 added the lateral feed-forward, it went in as a NEW profile (omni_ff) leaving the existing omni profile's behavior bit-identical; the checker (check_contract) was extended to force the feed-forward path to actually execute (cmd_vy=0.13) and promptly caught two genuine bugs: (1) re-clamping with soft_joint_pos_limits after the feed-forward (0.23 rad deviation) instead of reusing the parent's clip; (2) indexing processed actions by asset.joint_names instead of the action term's own contract-ordered _joint_names, which landed the feed-forward on the wrong joints (l_hip_yaw / r_ankle_pitch).
Change
Contract discipline as implemented: frozen dims + digest; manifest stamping and refusal; contract changes only via new versioned profiles; checker updated in the same commit as any pipeline change, with inputs chosen so new code paths are exercised.
Outcome
Both wiring bugs caught before any training or deployment ("两个都是 check_contract 当场抓出来的 —— 这次它值回票价"); old deployments provably unaffected by the new profile.
Mechanism
The contract is the only interface the policy and robot share; freezing plus fingerprinting makes divergence detectable, and an executable checker turns "the contract holds" from a belief into a test - but only if its inputs actually drive the new code path.
Applies when
- modifying the action or observation pipeline of a deployed policy
- exporting policies for hardware
- proposals that would change observation dims or history structure
“契约校验抓到的两个真错误（记账，别再犯）：1. 前馈后误用 soft_joint_pos_limits（URDF 限位 ×0.9）重钳 → 0.23 rad 偏差 … 2. 用 asset.joint_names 索引 _processed_actions → 前馈落到 l_hip_yaw/r_ankle_pitch 上 … 两个都是 check_contract 当场抓出来的 —— 这次它值回票价。”
train/C_LADDER_RUN.md § 3j. 契约级改动 / 契约校验抓到的两个真错误 The fallen-state reset was designed, not sampled from SO(3) - fixed category shares with jitter, a low drop that settles physically, equal left/right shares for mirror augmentation, and a numeric check before training
fallen-pose-reset-distributionBuild a fallen-start distribution from named, physically plausible categories with jitter and a settle phase, keep mirrored categories at equal probability, and check the realized shares and penetration numerically before spending a training run on it.
Symptom
A get-up policy can only learn from the fallen states its resets produce; uniformly random orientations produce ground-penetrating and limit-jammed states the robot can never be in.
Context
R0 reset_root_fallen: supine 30%, prone 30%, side_l 15%, side_r 15%, mid (random axis 50-125 deg) 10%, +/-15 deg jitter, full yaw, dropped from 0.28-0.40 m and left to settle under physics, joints uniform inside the soft limits with a 5% margin plus small random velocities. Random SO(3) was rejected (the advisor agreed). side_l and side_r must have equal probability because mirror augmentation turns a left fall into a right fall. The advisor had proposed supine and prone only for R0; the spec included side and mid because the feasibility accounts showed physical solutions for all of them, and wrote "narrow back to supine+prone" down as the first fallback. With no display on the training box the reset was checked numerically instead of by eye.
Change
Category mix as above; realized shares, settle height and penetration measured over 512 envs before the first run. A fallen-state bank (real falls, settled and stored) was pre-registered for R2.
Outcome
Realized shares 29.3/31.6/16.4/17.8% against the config, settle +0.262 m, final penetration 0/512 (a 0.10 m peak at the write instant, ankle links only, pushed out within 80 ms because the 0.28 m drop floor is shorter than a fully extended leg). R0's failure was a reward basin, not a reset artifact. The fallen-state bank stayed unbuilt through V3.1 (checklist item open); R0.3 later re-sliced the prone share into roll_l/roll_r bands, which is what forced the acceptance distribution to be frozen separately.
Mechanism
A category-structured, physically settled start distribution keeps training on states the robot can actually occupy, and equal mirrored shares keep mirror augmentation a pure doubling of data rather than a bias.
Applies when
- designing reset distributions for get-up, recovery or multi-contact skills
- mirror/symmetry augmentation is on and the task has chiral start states
- no viewport is available to inspect resets on the training machine
“角度 jitter ±15°、yaw 全域、0.28~0.40 m 低空放下由物理沉降,关节软限位内 均匀(留 5% 余量)+ 小随机速度。**不用 random SO(3)**(会采出穿地/极限卡死 等现实不可能状态,顾问同判) … side_l/side_r **概率必须相等**(镜像增强的样本同分布前提)”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §3 R0 任务定义 / §9 核查单 Prove a new penalty actually fires - two ways a clearance term silently did nothing
inert-reward-term-auditBefore training with a new reward term, log its realized per-step value under the current policy and confirm it is nonzero where intended - check coordinate zero-points against FK and check who occupies the term's gate; and never weaken the term that creates the states your new term needs.
Symptom
A newly designed swing-height clearance penalty could have trained as a no-op twice over, and the companion advice to lower feet_air_time actively backfired when tried.
Context
Instance 1 (zero-point offset): the proposed code used body_pos_w of the foot link, but that is the ankle_roll_link frame origin, which sits 0.0585 m above the ground even with the foot flat on it - so (0.03 - 0.0585) is always negative and the penalty is永远 0; the 0.0585 offset must be subtracted (verified identical in MuJoCo FK and Isaac). Instance 2 (gate occupancy): the clearance penalty fires only in swing phase; a dragging policy keeps both feet in contact, so the penalty is constantly 0 for exactly the policy it was meant to fix - and worse, any slight lift immediately incurs it, a reverse threshold. Lowering feet_air_time to 0.5 on that advice measurably collapsed air time to 0.0002 (below v3). Corrected understanding: "clearance 是把已有的摆动相抬高, 造出摆动相仍要靠 air_time" - air_time creates the swing phase, clearance raises it.
Change
Fixed the height zero-point; kept feet_air_time as the swing-phase creator with clearance layered on top; both errors documented as corrections to the team's own earlier advice.
Outcome
With both fixed, swing height rose from 22-23 mm (v2) to 29 mm (v5) to 34 mm (v6); the inert-term failure class entered the standing checklist.
Mechanism
A penalty's gradient exists only where its gate is occupied and its argument crosses its threshold; frame offsets shift the threshold out of reach, and phase gates can have zero occupancy under exactly the policy being treated. Terms interact as an ecology - one term must create the states in which another can act.
Applies when
- adding any gated or thresholded penalty (clearance, impact, slip)
- a new term produces no behavioral change at any weight
- body-frame positions are used in reward code
“body_pos_w 是 ankle_roll_link 坐标系原点,平放触地时仍高出地面 0.0585 m。… (0.03 − 0.0585) 恒为负 → 惩罚永远是 0 … clearance 惩罚只在摆动相生效,拖地时两脚始终触地 → 惩罚恒 0;而一旦轻微抬脚就立刻扣分,对正在拖地的策略是反向门槛。… 正确认识:clearance 是"把已有的摆动相抬高",造出摆动相仍要靠 air_time。”
train/WALK_DIAGNOSIS.md § walk_v4 独立验收 — 本文档给的两处代码/建议是错的 The 1.5 Hz step-frequency gate was retracted - the author had misread his own actuator data, and the limit fought pendulum dynamics
gate-threshold-retracted-frequencyEvery gate threshold must cite its measurement and survive a first-principles sanity check; when a gate keeps failing otherwise healthy behavior, re-derive the threshold from the raw data before enforcing it again - and retract wrong gates in writing.
Symptom
An acceptance criterion "step frequency <= 1.5 Hz" kept failing healthy policies (walk_v4 at 2.33 Hz), and an earlier attempt to force slower stepping (v3) had killed stepping altogether.
Context
The threshold had been derived from the author's own actuator frequency-response measurements - but re-reading the raw table showed the misread: amplitude ratio at 2.0 Hz is 0.88 (knee) / 0.83 (ankle), acceptable; the genuinely bad point was walk_v2's 3.8 Hz at 0.58. Mechanism check agreed: the leg as a compound pendulum (L ~ 0.30 m) has a natural frequency ~1.1 Hz, swing half-period 0.45 s - the observed 2.1-2.4 Hz sits near where the leg wants to swing, and forcing 1.5 Hz "是跟摆动动力学对着干" (fights the swing dynamics). The frequency definition itself was pinned by two independent methods (contact-event counting 2.39 Hz vs FFT 2.33 Hz, agreeing): reported numbers are cycle frequency = steps per leg per second.
Change
Gate retracted in writing: "步频 ≤1.5 Hz 应删除或放宽到 ≤2.5 Hz"; frequency definition standardized before entering any config.
Outcome
walk_v4/v6's 2.1-2.4 Hz reclassified from disease to normal; the v3 failure got its probable explanation (suppressing stepping to meet a wrong gate).
Mechanism
A gate is only as good as the measurement and the reading behind it; thresholds inherited from a misread plot become invisible design constraints that later training obeys at real cost. Cross-checking a threshold against first-principles dynamics (pendulum frequency) is a cheap way to catch such misreads.
Applies when
- an acceptance threshold repeatedly fails policies that look healthy
- thresholds were set from a single person's reading of raw data
- a forced compliance with a gate degrades the behavior it guards
“我当初依据自己测的执行器频响定的,但看错了区间。… 2.0~2.4 Hz 的幅值比 0.83~0.88 是可接受的;真正不行的是 walk_v2 的 3.8 Hz。… 腿按复摆算(L≈0.30 m)自然频率约 1.1 Hz … 把它压到 1.5 Hz 是跟摆动动力学对着干(walk_v3 把迈步压没了,可能正是这个原因)。”
train/WALK_DIAGNOSIS.md § ② 撤回"步频 ≤1.5 Hz"这条验收标准 —— 是我定错了 Borrow reward values from other robots as ratios (to tracking weight, to leg length) - never as absolute numbers
transfer-ratios-not-absolutesWhen importing any numeric from another robot's config or paper, identify its natural normalizer (tracking weight, leg length, sqrt(g*L), body mass) and transfer the dimensionless ratio; sanity-check against a same-scale robot when one exists.
Symptom
Published configs offered tempting absolute values (swing height target 0.06-0.08 m, weight -20) that would have been wrong for a robot with half the leg length and a different tracking weight.
Context
The cross-check normalized before transferring: G1's feet_swing_height weight -20 against tracking +1.0 is a 20x ratio, so with local tracking at 1.5 the equivalent is -30, not -20. G1's 0.06 m target on a ~0.70 m leg scales to ~28 mm on the local 0.325 m leg (Humanoid-Gym converts to ~23 mm), confirming the locally chosen 0.03 m and explicitly rejecting copying 0.05-0.08 absolutes. A same-class robot (Menlo's 16 kg) was used to sanity-check feet_air_time (+0.5 vs the local 2.0, flagged over-high). A nondimensional check of the same kind later validated the sidewalk speed target (v/sqrt(gL) = 0.081 vs hardware-verified 0.101 - 0.104 - inside the envelope, conservative).
Change
All borrowed values converted through ratios (weight/tracking-weight, height/leg-length, dimensionless speed) before entering the config.
Outcome
The scaled values worked (0.03 m target matched both the scaling law and measured 22-23 mm baseline); no cross-robot absolute was ever copied raw.
Mechanism
Reward economies are scale-relative (only ratios to the tracking term matter to the optimum) and kinematic quantities are morphology-relative (clearance scales with leg length, speed with sqrt(g*L)); absolutes encode the source robot's scale, ratios encode the design intent.
Applies when
- copying reward weights/targets from open-source configs or papers
- setting clearance heights, speed targets, or impact thresholds
- comparing your weights to published tables
“G1 的 feet_swing_height 是 tracking 的 20 倍(−20 vs +1.0)。我们 tracking 是 1.5,按同比例应为 −30 … G1 目标 0.06 m / 腿长 ~0.70 m,换算到我们 0.325 m 腿长约 28 mm;Humanoid-Gym 换算约 23 mm。故 target 取 0.03 m 是对的 … 不必抄 0.05~0.08 的绝对值。”
train/WALK_DIAGNOSIS.md § 修正 ②(权重放大) / 修正 ③(目标高度按腿长缩放) IMU observation age cut 52-68 ms to ~4 ms by moving AHRS onto the MCU - as a single variable
imu-age-move-fusion-downstreamAudit observation age end-to-end and move time-critical fusion as close to the sensor as possible - and when you fix a latency, change only that one variable so the gain is attributable.
Symptom
IMU-derived observations reaching the policy were 52-68 ms old because attitude fusion ran in Python on the loaded host computer - stale attitude is a direct feedback-loop delay the policy was not trained with.
Context
The fix was scoped deliberately narrowly: move the AHRS computation from Python to the STM32 H7 (MC02). CAN topology explicitly unchanged, so the change is a clean single variable.
Change
AHRS fusion relocated Python -> H7. Before/after - IMU age: 52-68 ms -> ~4 ms; CAN timing: unchanged; Python load: high -> ~0.
Outcome
IMU age reduced by an order of magnitude with no confound; host CPU headroom recovered ("把计算单元搬在stm32上, 这样imu有剩余").
Mechanism
Sensor age is pipeline latency, not sensor quality: fusing on the MCU next to the sensor removes host scheduling jitter and interpreter overhead from the critical path. Keeping the bus topology fixed makes the improvement attributable to the relocation alone.
Applies when
- measured sensor-to-policy age far exceeds sensor sample period
- attitude fusion or filtering runs on a loaded host CPU in an interpreted runtime
- planning infrastructure changes during a sim2real campaign
“AHRS 搬到 H7——这个不改 CAN 拓扑，只是把一段计算从 Python 挪到 MC02，单变量：IMU age 52–68 ms → ~4 ms / CAN 时序 不变 / Python 负载 高 → ≈0”
Experience.md § AHRS 搬到 H7 (lines 28-35) No parameter tuning on the floor - a failing config retries once, then it is out; anomalies go back to sim
no-field-tuning-protocolHardware time is for executing and measuring the pre-registered matrix, never for tuning: failing configs get one retry then elimination, anomalies get recorded and reproduced in sim, and contract-check bypass flags stay unused.
Symptom
Hardware sessions create pressure to fix problems live - nudge a gain, tweak a scale - which destroys attribution and risks the robot.
Context
The anomaly-handling section of the acceptance sheet is three fixed plays: (1) falls at start -> retry once at the same settings; falls again -> that configuration is eliminated, "不现场调参" (no on-site parameter tuning); (2) limit cycle or motor screech -> stop immediately, record the gain level and the joint, reproduce in sim before any discussion; (3) systematic disagreement with sim -> record it as a finding (hardware outranks sim) rather than adjusting anything to force agreement. Related guardrails elsewhere in the sheet: never pass --allow-unstamped / --allow-plant-drift to bypass manifest checks - if it errors, something real is wrong, stop and look.
Change
Field sessions restricted to executing the pre-written matrix; every fix path routed through sim reproduction and the normal config/rung process.
Outcome
Sessions stayed interpretable (each run matched a documented config) and safety overrides never became habit; anomalies arrived back in sim as reproducible cases instead of half-remembered floor stories.
Mechanism
Field-tuned values are measured under adrenaline on one floor with no logging or baselines - they contaminate the config lineage and are unattributable afterwards; and every bypass flag that skips a contract check converts a designed safety property into an operator promise.
Applies when
- a config fails or oscillates during a hardware session
- someone reaches for a live gain tweak or a bypass flag
- writing the anomaly-handling section of a deployment runbook
“起步即摔 → 换档重试一次, 仍摔则该档出局, 不现场调参。出现极限环/啸叫 → 立刻停, 记录档位与关节, 回 sim 复现再议。… 不要给 --allow-unstamped / --allow-plant-drift —— 三枚 ONNX 都已盖章 … 真要报错说明有别的问题, 停下来看。”
train/REAL_RUN_S2.md § 4. 异常处置 Narrowing the speed range to stop high-speed falls entrenched crouch-shuffling - judge gait quality at the speed that demands a gait
low-speed-commands-reward-draggingSet command ranges to include speeds that physically demand the target behavior, and evaluate behavior-quality gates at those speeds; when a restriction is added to suppress a failure, check what new optimum it creates at the remaining commands.
Symptom
After the command range was narrowed to (0.15, 0.35) m/s (to treat walk_v1's 134% overspeed and 8.3 s fall at 0.5), the policy settled into crouched foot-dragging; tracking rose monotonically with speed (63% at cmd 0.2, 76% at 0.3, 87% at 0.45), showing low speeds were where the degenerate gait was optimal.
Context
The narrowing advice was the author's own and is retracted in the file: it treated the symptom (falls at speed) while reinforcing the root cause (at 0.15-0.35 m/s, shuffling in a crouch is globally optimal - the Froude number is so low that even humans would not lift their feet). A zero-cost experiment confirmed the flip side: at cmd 0.5 the same policy met BOTH tracking (81%) and clearance (23.0/23.2 mm) standards.
Change
Speed range widened back toward (0.15, 0.5) - upper bound deliberately slightly above the mechanically feasible ~0.44 m/s so the policy finds the boundary itself; acceptance re-pointed: gait-quality criteria (tracking, clearance) judged at 0.45-0.5 m/s, low speed kept only as a survival check.
Outcome
v4 -> v6 progression under the widened range delivered 87% tracking with 34 mm clearance; the "low command = drag" account was confirmed by the monotone tracking-vs-speed curve.
Mechanism
Command distribution is part of the reward: physics prices gaits per speed, and at very low speed the energetic optimum is no swing phase at all. Restricting training to that regime makes the degenerate gait the correct answer to the posed problem - and grading a gait at a speed that does not require stepping measures nothing.
Applies when
- a gait degenerates after a command-range restriction
- quality metrics improve monotonically toward the range boundary
- writing acceptance criteria for gait quality vs survival
“现在看那个建议可能起了反作用:0.15~0.35 m/s 下蹲着蹭就是全局最优,抬腿反而亏。收窄治的是"高速摔倒"的症状,却强化了拖地的病根。… 验收标准里的 cmd 0.2 本身就是拖地速度(Froude 数极低,人在那个速度下也不抬脚)。accept_v2 应把速度跟踪与 clearance 的判定点改到 0.45~0.5 m/s”
train/WALK_DIAGNOSIS.md § ② 放宽速度区间 / ① 零成本实验 mj_objectVelocity returns inertial-principal-axis frame - one API assumption poisoned eval and observations for a whole line
body-frame-velocity-api-auditVerify every frame-sensitive API against a hand-computed truth (rotate raw qvel yourself, or command a known world velocity and check where it lands) before trusting any evaluation or observation built on it - especially when a model's inertial frame is rotated from its body frame.
Symptom
Sidewalk vy read ~0 under every condition; separately, whole-policy performance was mysteriously mediocre in sim2sim while training-side numbers looked fine. Four training rungs were declared FAIL partly on these readings.
Context
base_link's URDF inertial frame is rotated 90 deg about x relative to the body frame (iquat = [0.7071, 0.7071, 0, 0]). mj_objectVelocity(flg_local=1) rotates into ximat - the inertial principal-axis frame - not the body frame, and returns center-of-mass point velocity, not body-origin velocity. Consequences measured: the "vy" column was actually vertical velocity vz (walking at cmd 0.25: old reading +0.0093 vs true -0.0424); the angular velocity fed to the policy in sim2sim was [wx, wz, -wy] - a different quantity than Isaac and the real IMU provide. RMS check over 8 s of walking: y/z axes swapped between v6[:3] and the qvel truth.
Change
Fixed sim2sim and both probes to compute ang_b = qvel[3:6] and lin_b = xmat.T @ qvel[0:3] (identical quantity to Isaac's root_ang_vel_b / root_lin_vel_b), with a standalone reproduction script (frame_bug_repro_0809.py).
Outcome
Re-scoring the "failed" C4 lineage under correct coordinates reversed the verdicts: c4r4 checkpoints showed vy 80-126% tracking (old reading: +/-2%) and vx+0.30 at 91-95% where the old metric said 0/5 - the bad frame both mis-measured vy and, via corrupted policy observations, systematically depressed all measured performance. Final product passed 260/260 cells.
Mechanism
A simulator API's frame convention is part of the observation contract; when the model's inertial frame is rotated relative to the body frame, frame-agnostic use of a "local" velocity silently permutes axes. Feeding a policy an axis-permuted angular velocity is an observation corruption that degrades behavior everywhere, not just on the axis being studied.
Applies when
- building or auditing a cross-simulator evaluation harness
- one measured axis reads near-zero under all conditions
- sim2sim scores are inexplicably worse than training-side metrics
- URDF/MJCF inertial frames are rotated relative to body frames
“base_link 的 iquat = [0.7071, 0.7071, 0, 0] … mj_objectVelocity 用的是这个 … 喂给策略的 base_ang_vel 是 [wx, wz, −wy] —— MuJoCo 侧观测与 Isaac / 真机 IMU 不是同一个量；vy_mean 报的是竖直速度 vz —— 前进 cmd 0.25 时旧读数 +0.0093，真值 −0.0424。”
train/C_LADDER_RUN.md § 3l. ⚠️ mj_objectVelocity 读的是惯性主轴系 / 3m. 一 bug 坐实 Diagnose a behavior failure by enumerating hypotheses and auditing each against the actual config, cheapest first
hypothesis-table-code-auditBefore changing anything, write the full hypothesis list for the symptom and audit each against the resolved config and measured magnitudes, cheapest check first; train only on the survivors.
Symptom
Real robot leaned forward "wanting to walk" but dragged its feet instead of lifting them - a symptom with many plausible causes and no obvious single fix.
Context
Seven hypotheses were listed and each checked against the actual training config files (velocity_env_cfg.py, isaac_values.py), ordered by check cost: missing foot clearance term (CONFIRMED, primary - feet_air_time existed but no swing-height term at all); energy penalties dominating (REJECTED - energy terms total -0.19 vs tracking +1.2, 16%); command range too narrow (CONFIRMED - (0.15,0.35)); nominal pose too crouched / action scale too small (HALF - knee 0.5 rad = 28.6 deg deep, scale fine); mixed PD across motor types (REJECTED - already grouped); missing base-height reward (REJECTED - present at -5.0); height-drop termination (REJECTED - none exists, which itself became finding #4 of the fix list).
Change
The audit produced a ranked fix list (add clearance penalty; widen speed range; reduce nominal crouch) with each rejected hypothesis documented so it would not be re-litigated.
Outcome
Three confirmed causes fixed over v5/v6: swing height went 22-23 mm -> 34 mm, tracking 81% -> 87%; the rejected hypotheses stayed rejected (no wasted rungs on energy weights or PD grouping).
Mechanism
Multi-cause symptoms invite guess-and-train loops; a written hypothesis table forces each candidate to be confirmed or rejected against actual values (not impressions), and cost-ordering the checks means most hypotheses die for the price of reading a config.
Applies when
- a real or sim behavior failure has multiple plausible causes
- the team is about to "try a fix" without an audit
- post-mortems keep re-proposing already-rejected causes
“真机现象:躯干前倾像要走,脚抬不起来(拖着蹭)。按成本从低到高逐条核查 … | 1 | 缺 foot clearance | ✅ 成立,首要 | 有 feet_air_time,无任何摆动足高度项 | | 2 | 能量惩罚压过跟踪 | ❌ 不成立 | 能量类合计 −0.19,跟踪 +1.2,只占 16% |”
train/WALK_DIAGNOSIS.md § walk 拖地问题 — 七条假设的代码核查结果 Add a termination that makes the degenerate strategy fatal - no height cut-off meant crouch-shuffling could live forever
termination-closes-degenerate-basinFor each known degenerate strategy, check whether the termination set makes it fatal; if the robot can live indefinitely inside the degenerate posture, add a termination just past the intended operating envelope rather than escalating penalties.
Symptom
Crouched foot-dragging survived indefinitely because the termination set contained only bad_orientation (40 deg) and base contact - there was no height termination at all, so a deep squat was a viable long-term strategy.
Context
The hypothesis audit found the missing termination (hypothesis 7); the cross-check against published configs found the field practice: Booster terminates at 0.45 m (38% of body height) and the research warning is that the termination height must not be so low that crouching survives it. The proposed value: 0.32 m, just below the walk crouch base height 0.3739 - a deep squat terminates immediately, "断掉蹲着蹭的活路" (cutting off the crouch-shuffle's livelihood).
Change
Add height termination at 0.32 m as a second-priority item of the walk fix package, alongside restoring base_height_l2 to -10.
Outcome
Entered the v5/v6 fix package under which the crouch-shuffle optimum disappeared (34 mm clearance, 87% tracking by v6).
Mechanism
Termination conditions define which strategies exist at all: a reward penalty prices a behavior, but a termination deletes its future returns entirely. Degenerate basins that are merely penalized can remain optimal under enough tracking pressure; a termination placed between the degenerate posture and the intended one makes the basin unreachable as a steady state.
Applies when
- a degenerate but stable behavior persists across reward tunings
- auditing termination conditions for a locomotion task
- a policy exploits the gap between penalized and terminated states
“加终止高度:研究第 6 条"终止高度不能低到让蹲着也能活"。我们完全没有高度终止。建议 0.32 m(略低于 walk 蹲姿基座高 0.3739,深蹲即终止)。… 加终止高度 0.32 m(深蹲即终止,断掉蹲着蹭的活路)”
train/WALK_DIAGNOSIS.md § 修正 ④ / 最终改动清单 第二优先 Set torque limits per joint from measured gait peaks - a uniform percentage is the wrong shape, and training must use the deployed numbers
torque-limit-shape-by-measured-peaksMeasure per-joint torque peaks in the actual gait and set each limit as measured-peak x margin capped at rating; then propagate the same numbers into training and add an automated deploy-time consistency check - never derate by a uniform percentage, never let training assume torque deployment will not grant.
Symptom
A uniform 50% torque derating (18/8.5/7) had piled safety margin on the joints that never use it while cutting the busiest joint below half its measured demand.
Context
Per-joint gait peaks were measured (walk_v5 at cmd 0.3/0.6): RS06 (hip_pitch/knee) uses 5.5-5.9 N*m = 15-16% of its 36 N*m rating - cutting it to 12 is a free safety win; RS02's ankle_pitch runs at 16.2 N*m = 95% of its 17 N*m rating - "它是速度的硬件瓶颈", no room to cut; RS00 measured 36-44%, capped at 11. The resulting shape 12/17/11 replaced the uniform percentage. Sweeps across several limit sets (rated / 50% / 14-17-11 / 12-17-11) produced identical speed, lift, and landing force - within this range the limits do not shape the gait; what matters is consistency: "关键是训练和硬件必须是同一个数", because the exporter fills effort_limit from tau_limit, and a policy trained at rated 36/17/14 "会假设有三倍力矩可用" while deployed at 12/17/11 (exactly the v5 cross-generation inconsistency later suspected in its wild kicking).
Change
robot.yaml tau_limit set to the measured-shape 12/17/11, firmware written to match, and train/isaac_values.py regenerated so training sees the same limits; the deploy tool self-checks limits against robot.yaml on every run.
Outcome
Free safety margin captured where demand is low, the real bottleneck joint left at rating, and the train/deploy torque worlds unified with an automated consistency check.
Mechanism
Torque demand is grossly unequal across joints in a gait (15% vs 95% of rating here); a uniform percentage misallocates the safety budget by construction. And since the trainer treats effort_limit as a plant truth, any train/deploy mismatch is an invisible plant gap of exactly the mismatch ratio.
Applies when
- choosing safety torque limits for a legged platform
- training-vs-deployment actuator limit audit
- one joint runs near rating while others idle
“曾用统一 50%(18/8.5/7)是错的形状: 把余量堆在用不到的 RS06 上, 却把 ankle_pitch 砍到需求的 52%。… RS02 在 0.6 m/s 已用到额定 95%, 它是速度的硬件瓶颈 … 实测多组限幅 … 完全一致 —— 限幅在这个范围对步态零影响, 关键是训练和硬件必须是同一个数。… 若训练仍按额定 36/17/14, 学出的策略会假设有三倍力矩可用。”
train/WALK_V6_MINIMAL.md § 3. 训练侧必须同步的一件事 An auto-curriculum ratchet capped out at iter 248 and never engaged - stage difficulty manually or verify engagement
auto-curriculum-engagement-checkPrefer manually staged difficulty with gated transitions; if you use an automatic curriculum, instrument its internal state and alarm when it stops engaging - a saturated curriculum is constant DR wearing a curriculum's name.
Symptom
A curriculum mechanism intended to grow difficulty adaptively (s1f's ratchet) hit its cap at iteration 248 and never bit again - for 96% of the run its effect was equivalent to constant DR, i.e. the curriculum existed in name only.
Context
When external advice suggested graded wz bands (start ±0.15, then ±0.30), the team agreed with grading but explicitly rejected automatic curriculum, citing the s1f episode. The same logic had already been paid for with push grading: ±0.6 failed twice, ±0.3 was feasible - grading matters, but the grade transitions were made by hand at verified checkpoints.
Change
Ladder policy: difficulty staged manually, one band per rung, each transition gated by the acceptance battery; automatic ratchets not used unless their engagement is monitored and demonstrated.
Outcome
Every C-ladder band change (wz ±0.12-0.25 first, wider later) was an explicit, attributable rung; no silent constant-DR-in-disguise runs recurred.
Mechanism
Adaptive curricula couple their own state machine to noisy training metrics; a ratchet that saturates early stops adapting but keeps its name, so the operator believes difficulty is progressing when it is frozen. Manual staging costs more decisions but each decision is observable and reversible.
Applies when
- choosing between auto-curriculum and staged bands for a new skill
- a curriculum's difficulty parameter plateaus early in training
- post-hoc attribution of what difficulty a lineage actually saw
“C2 的 wz 分级（±0.15 → ±0.30，不要一上来 ±0.6）—— 与我们付过学费的 push 分级同形（±0.6 两轮 FAIL，±0.3 才可行）。但必须手动分级，不做自动课程 —— s1f 的课程化棘轮 iter 248 封顶未咬合，96% 时长等价常量 DR”
train/C_LADDER_RUN.md § 1. 采纳 3 条 (C2 的 wz 分级) Continuing a converged policy on a change that carried no new gradient drifted its transfer from 100/98% to 80/28% over 3,000 iterations while every Isaac gate stayed perfect - scan every checkpoint on the second simulator's friction axis
converged-continuation-is-poisonBefore continuing a converged policy, check that the change creates a live gradient; if it does not, cap the budget at a few hundred iterations, and in every continuation scan each checkpoint on the second simulator's transfer axis (for example low friction) - trainer-side gates can stay perfect while transfer decays.
Symptom
V2.7-A (swap the flat_feet term for a compensated version, continue from v2_6c) finished with the line's best Isaac score (100%) and a MuJoCo transfer collapse: mu 1.0 98 -> 80%, mu 0.4 98 -> 28%; the stance it was meant to widen had not moved.
Context
The new term's calibration run showed a near-zero tax from the start: the policy already satisfied it, so the reward landscape offered nothing new. A checkpoint scan on MuJoCo mu {1.0, 0.4} located the damage: +100 iterations 100/98% (better than the baseline), then 86/54, 60/38, 80/28 - monotonic decay with training length, while entropy and action noise rose (7.77 -> 8.18, 0.588 -> 0.612): drift, not sharpening.
Change
Rule written in: with no new gradient, a continuation budget is short (at most a few hundred iterations) and the MuJoCo transfer axis enters every checkpoint scan. The next rung (V2.7b, a live stance-width gradient) was budgeted at 1,000 iterations with mu {1.0, 0.4} scans every 100 and a stop-on-signal rule.
Outcome
V2.7b kept transfer at the same depth (mu 1.0 98% / mu 0.4 92% at +1,000, where A had already rotted to 86/54) and at +3,000 (100/96%): a live gradient preserved transfer. V2.8 then broke that pattern (mu 0.4 2%): the gradient must also be compatible with the policy's existing form.
Mechanism
On a converged reward landscape PPO keeps updating without a signal to follow, and the random walk is pulled toward whatever the training plant rewards idiosyncratically - invisible in the trainer's own gates.
Conflicts
The drift mechanism is the spec's reading of one decay series plus one contrasting run; V2.8 is recorded as an exception to "live gradient keeps transfer".
Applies when
- fine-tuning a converged policy with a small reward change
- a continuation run's trainer-side metrics improve while real or cross-sim results worsen
- choosing which checkpoint of a continuation to ship
“**checkpoint 扫定死因**(μ1.0/μ0.4):**29500(+100 iter)= 100/98%** (优于基线!)→ 30400 = 86/54 → 31400 = 60/38 → 32398 = 80/28 —— **迁移随续训长度单调衰减**。 … **教训入库:收敛均衡上的长续训是毒药 —— 无新梯度时 续训预算须短(≲数百 iter),且 MuJoCo 迁移轴必须进 checkpoint 扫描。**”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §43 结果:V2.7-A 判 FAIL —— 换刀本身无罪,毒在续训预算 Training the final recipe from scratch in one run - every mechanism the lineage had accumulated - produced 0% and a seated robot; the order in which the lineage acquired those mechanisms was part of why it worked
curriculum-history-is-part-of-the-productA recipe that ends a lineage is not a recipe for a from-scratch run: consolidate it as ordered curriculum phases matching how the lineage acquired its mechanisms, check that every curriculum criterion is reachable from the starting policy, and read the run's raw term values, not the total reward, before calling it green.
Symptom
V3.0 trained the lineage's whole final recipe from scratch in one 9,000 iteration run - full beta curriculum, prone-conditioned pull assist, friction DR, the 3 s zero gate on standing income, flat_feet - testing the proposition "the product is defined by its configuration, not by its training history". Training looked all green (reward 26.33, episode length 500, 100% time-outs).
Context
Read in raw units against v2_6c at the same weights, the green was a seated equilibrium: base_height 0.377 vs 0.640, stand_pose 0.205 vs 0.516, flat_feet 0.0000 (zero because it sits outside its height gate, not because the feet were flat). Acceptance: 0.0% in Isaac at the deployed authority, 0.0% on every MuJoCo friction level, and still 0.0% at the training-time authority (100% seated at 0.222 m, upright and still).
Change
The full stdout (316k lines) was read: the beta curriculum's criterion (standing share over 0.35) was met zero times, so beta never left the wide setting and the policy had no experience at the deployed authority; the pull curriculum was stuck on the same criterion. The lineage had escaped the seated basin with immediate income (V2.0-V2.2) and only then added the zero gate to cure rushing (V2.5); from scratch, the zero gate removed the early "stand fast, earn more" gradient needed to escape. Verdict "the curriculum history is part of the product", limited to n = 1. v2_6c stayed the product.
Outcome
V3.1 kept the order as explicit phases: P1 from scratch with immediate income (zero gate off) until the curricula advance, P2 adding the zero gate. P1b/P1c escaped the seated basin and passed; P2 was later judged net negative and dropped (time-gate-vs-wide-stance-retire-the-fix).
Mechanism
Mechanisms that refine a competent policy (time gates, tight authority) can delete the gradient a naive policy needs, and a curriculum whose advancement criterion the naive policy never meets freezes at its first level.
Conflicts
The spec limits the falsification to "this recipe + this curriculum criterion" (n = 1, no seed sweep, no criterion tuning). V3.1's phased run succeeding is consistent with the ordering reading but changed other terms too.
Applies when
- consolidating a long lineage of continuation fixes into one clean recipe
- a from-scratch run with all mechanisms enabled plateaus early
- curriculum state is not logged or never advances
“命题:产物由配置定义,而非训练史定义。 … 训练 log(完整 stdout 316k 行)`[beta_anchor]` 仅初始 1 行,**达标 0 次** … V2.0~V2.2 靠**即时计酬**爬出坐姿盆地(§33),站立巩固后 V2.5 才装归零门 治"过快"(§39)。**课程史是产品的一部分。**”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §42 V3.0 判决(2026-08-11):从零单 run 全机制 FAIL 于坐姿盆地 A joint-velocity penalty meant to slow the get-up cut joint speed 16% and left the get-up time unchanged - the knob never moved the variable, so the idea it was meant to test stayed untested
dof-vel-penalty-is-not-a-pacing-knobBefore reading a result as a test of an idea, check that the knob actually moved the independent variable; velocity regularizers smooth a schedule they do not set, and a schedule driven by per-step task income moves only when that income's time structure does.
Symptom
The get-up took 0.6-0.9 s in Isaac with large torque demand; the user proposed getting up more slowly so less torque would be needed.
Context
The idea had support in the accounts: the acceptance bound is an upper bound of 5 s (5-8x margin), the quasi-static squat path peaks at 25% of the limits, and rolling over needs no momentum. R3.2 raised dof_vel from -1e-3 to -5e-3 as the single variable.
Change
dof_vel -1e-3 -> -5e-3 (child-run from R3.1).
Outcome
Get-up medians moved +0.02-0.04 s (noise); raw joint velocity -16%; torque demand median got worse (hip_pitch 46-48% -> 63-67%) as the new term competed with torque_headroom on the same joints; MuJoCo 98 -> 96%. Verdict FAIL on the knob, not on the idea, and the rung was not adopted. When pace was later attacked through the income's time structure (V2.5/V2.5b), the MuJoCo get-up moved into the 3.5-4.5 s design band.
Mechanism
The pace was set by base_height_progress paying for every step spent high (stand earlier, earn more); a velocity regularizer only smooths motion along the same schedule and does not change when the robot stands up.
Applies when
- trying to make a skill slower or gentler with smoothness penalties
- an experiment's primary metric did not move and a verdict is being written
- two penalties act on the same joints
“**关键判读:`dof_vel` 罚只把关节速度压了 16%,而起身用时一点没变。** 也就是说**这一级根本没有把"慢下来"这个自变量推动起来** —— 所以它**不构成对 用户假说的检验** … 起身节奏由 `base_height_progress` 的逐步计酬决定(早站起来就多 拿),速度正则只在同一条时间轨迹上把动作抹匀,不改变何时站起来。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §25 R3.2(dof_vel −1e-3→−5e-3,慢一点起身) Exponential tracking kernels go flat exactly when the error is largest - pair them with an L2 term for the far field
exp-kernel-needs-l2-far-fieldNever let an exp/Gaussian kernel be the only tracking pressure on a quantity that can drift far from target: pair it with an unbounded (L2) term sized as the "don't diverge" floor, and check which frame the kernel reads.
Symptom
With only an exp-type yaw tracking term (exp(-err/std^2), std 0.25), a robot whose heading had drifted badly received almost no corrective gradient: at error 0.6 rad/s the term evaluates to exp(-0.36/0.0625) = 0.003 - near zero AND flat.
Context
The exp kernel is excellent for fine tracking near zero error but its gradient vanishes at large error - precisely when correction matters most. Fix: add track_ang_vel_z_err_l2 (-0.5), a plain quadratic on the same quantity: "exp 管精细跟踪、L2 管'别发散', 互补". Both terms deliberately read WORLD-frame wz (matching the exp term's source), because this torso sways enough that body-frame wz means are systematically off (measured -0.039 while actually turning +0.152). The same far-field-gradient argument reappears in the v8 risk list: frozen joints could not climb back because their huge error put them on the exp plateau ("远端梯度消失是冻结自锁的帮凶").
Change
Added the L2 companion term at -0.5 alongside the existing exp term (a term that had been in an earlier draft and was lost in a rewrite - itself worth noticing).
Outcome
Corrective pressure restored across the whole error range; the exp+L2 pairing became the house pattern for tracking terms.
Mechanism
d/de[exp(-e^2/s^2)] -> 0 as e grows: the kernel saturates and cannot distinguish bad from terrible. A quadratic's gradient grows with error, covering the far field; summing the two yields monotone corrective pressure with fine shaping near the target.
Applies when
- tracking rewards use exp/Gaussian kernels alone
- a drifted or frozen state fails to recover during training
- designing tracking terms for quantities with large transient errors
“exp 在误差大时梯度趋零, 恰好在最需要纠正的时候失灵。… 误差 0.6 → exp(-0.36/0.0625) = 0.003, 接近零且平坦。… exp 管精细跟踪、L2 管"别发散", 互补。”
train/WALK_V7_SPEC.md § ② track_ang_vel_z_err_l2 −0.5 —— 补 exp 的梯度洞 Audit which joints your imitation term constrains - a task that needs deviation is fighting the reference
imitation-term-scope-auditList which joints your imitation/deviation terms actually constrain and check the new skill's required motion against that list; for balance-coupled joints deliver references as feed-forward residuals, not absolute-position targets - and never assume "reference = 0" is neutral.
Symptom
Sidewalk would not learn despite a dedicated tracking reward; meanwhile the gait-shaping imitation term (joint_pos_ref) computed its error norm over ALL 12 joints while its reference covered only the 6 sagittal joints - roll/yaw reference was constantly 0.
Context
Two prior generations had shown the forward gait itself was taught by joint_pos_ref, not discovered by PPO (v6 halved the shaping and swing height collapsed 35 mm -> 4 mm). So the reference is load-bearing - but sidewalk requires hip_roll to deviate from nominal, and the all-joints norm punished exactly that deviation: "一边悬赏一边罚过程" (posting a bounty while punishing the process). A follow-up experiment (C4-redo3, free_roll=True releasing the 4 roll joints from the norm) raised the regularization headroom 6x -> 27x yet sidewalk stayed flat and released hip_roll wandered, killing other skills - net negative, withdrawn. A --roll-absolute probe showed the converse failure: pinning roll to a clock-driven absolute trajectory drove tilt 6.9 -> 13.7 deg. Conclusion recorded: absolute-position imitation cannot teach actions that must be superimposed on state feedback.
Change
The audit reframed the problem: neither punishing roll deviation nor freeing roll nor absolute roll tracking works; the reference for a balance-coupled joint must be delivered as feed-forward under the policy's residual control (see feedforward-for-phase-locked-skills).
Outcome
free_roll rung: joint_pos_ref term rose 0.887 -> 1.104 (release confirmed effective) but vy stayed flat; regularization hypothesis eliminated by experiment.
Mechanism
An imitation error norm defines a cage: joints inside it are pulled to the reference in absolute position, so any skill requiring systematic deviation is taxed per step; but joints carrying active balance cannot follow absolute references either, since their correct position depends on state. The scope and the delivery mechanism of the reference are therefore design decisions per joint, not defaults.
Applies when
- adding a skill that moves joints your reference sets to zero/nominal
- an imitation or deviation penalty coexists with a new tracking reward
- considering releasing joints from a shaping term mid-lineage
“前进步态也不是 PPO 自己发现的，是 joint_pos_ref 教出来的（v6 砍半塑形 → 抬脚 35 mm 塌到 4 mm…）。而 ref_joint_offset 原本只写 6 个矢状面关节，roll/yaw 参考恒 0 —— 侧走既没被教，roll 一偏离 nominal 反被 joint_pos_ref 扣分。一边悬赏一边罚过程。”
train/C_LADDER_RUN.md § 3e. 为什么首战 FAIL / 3i. 解锁笼子 A quadratic clearance reward stalled for 3500 iters near target - switch to an indicator on accumulated height
indicator-reward-avoids-gradient-decayWhen a shaped term plateaus near its target, check the gradient profile: replace vanishing-gradient forms with threshold/indicator forms for the final approach, and prefer delta-accumulation over absolute positions to immunize against frame offsets.
Symptom
The quadratic-error clearance term froze at -0.002 from iteration 2000 to 5500 - thousands of iterations with no progress on foot lift.
Context
Diagnosis: a quadratic penalty's gradient vanishes as the error approaches target, so exactly where the last millimeters must be earned the incentive fades to nothing. The replacement (Humanoid-Gym form): accumulate the swing-phase height climb per foot, reward a BINARY indicator |accumulated - target| < 0.01 masked to the planned swing window, reset on contact, weight +1.6 as a positive reward. Two properties: the indicator's incentive is constant until the threshold is crossed (no decay zone), and accumulating height DELTAS makes any constant sole-frame offset cancel automatically - which structurally sidesteps the earlier 0.0585 m zero-point bug ("顺带绕开我先前那个'忘了减 0.0585 导致惩罚恒为 0'的坑").
Change
Clearance reformulated from quadratic penalty on instantaneous height to indicator on per-swing accumulated climb (target 0.03 m by leg-length scaling, weight +1.6).
Outcome
Part of the v5 package under which lift finally moved (v5 29 mm, v6 34 mm vs the stalled 18-24 mm era); the offset-cancellation property removed one whole bug class from the term.
Mechanism
Policy-gradient learning follows the reward's local slope; quadratic shaping concentrates slope far from target and starves it near target, so convergence stalls precisely at the finish line. An indicator pays a constant bounty until the goal is met; formulating on deltas rather than absolutes removes sensitivity to reference- frame constants.
Applies when
- a reward term's value freezes short of target for thousands of iters
- designing clearance/height/precision terms
- reward code depends on absolute link positions
“现行二次型在接近 target 时梯度趋零 —— 这正是 clearance 从 iter 2000 到 5500 卡在 −0.002 不动的原因。… 二值指示在跨过阈值前梯度恒定,没有衰减区 … 累积 delta 让 SOLE_OFFSET 自动抵消”
train/WALK_V5_SPEC.md § 3. clearance 改峰值型(去掉二次型的梯度衰减) The median of a bimodal metric lands in the empty gap - check the distribution, and never judge swing on 3 seeds
median-hides-bimodal-distributionBefore quoting a median or mean, look at the distribution; report suspected-bimodal metrics as mode share plus per-mode ranges, use small-seed smoke runs only to screen trends, and size the seed count for decisions by the share resolution you need (here: 20).
Symptom
Years of "high swing variance" and undecidable 3-seed swing readings turned out to be one fact: the metric was bimodal all along - "历代 swing 高方差与 3-seed 不可判由此定性:一直在测双稳态系统" - and every median reported from it (e.g. 12.1 mm) described a value no seed ever produced.
Context
Concrete instances: s2e_pd-1400's 20 seeds split 2.6-4.9 mm vs 19.3-24.0 mm with zero seeds between; s1e-500 read 3.9 mm on seeds 0-2 but 23.1 mm median over 20 seeds; a 3-seed reading of 19.3 was logged as "double-peak optimism, lesson recurrence #4". The selection re-audit codified the sampling rule: "3-seed 的 swing 读数不可判点, 只能筛带,选点必须 20-seed" - 3 seeds may screen a band, only 20 seeds may pick a point.
Change
Swing (and any suspected multi-modal metric) reported as mode shares plus per-mode ranges instead of a bare median; 3-seed smoke numbers demoted to band-screening; all shipping/selection decisions moved to 20-seed batteries.
Outcome
The "swing debt" bookkeeping was reinterpreted as basin probability (see swing-bistability-damping-switch), and checkpoint selection stopped being whipsawed by which basin the first three seeds happened to fall into.
Mechanism
Central-tendency statistics presuppose unimodality; on a bimodal distribution the median tracks the mode SHARE, not any achievable behavior, and small samples alias the share entirely. Mode-aware reporting (share + per-mode stats) is the only faithful summary, and the needed sample size is set by the share resolution required.
Applies when
- a quality metric shows chronic high variance across seeds
- 3-seed smoke readings contradict 20-seed batteries
- reporting swing height, clearance, or any basin-prone metric
“中位数落在空档里,「swing 债 −11mm」实为「50% 概率掉进拖地吸引子」。历代 swing 高方差与 3-seed 不可判由此定性:一直在测双稳态系统。… swing 跨 seed 双峰 (500 在 seed0~2 只读 3.9mm, 20-seed 中位 23.1) —— 3-seed 的 swing 读数不可判点, 只能筛带, 选点必须 20-seed。”
train/README.md § swing 双稳态定性 / s1e 选点重审 A single run's drift direction may be a limit cycle, not a policy bias - check the sign distribution across seeds
multiseed-sign-test-for-driftDistinguish "bias" from "broken symmetry limit cycle" by the sign distribution over many seeds; report drift as (mean, sign split), and never compare single-run drift magnitudes across versions.
Symptom
Net yaw over 15 s appeared to worsen from -41 deg (v2) to -84 deg (v4), inviting the conclusion that the new version drifted more.
Context
The Isaac-side view across 32 environments told a different story: per-env yaw was mixed-sign (20 negative / 12 positive) with mean ~0 - the drift is a limit cycle whose direction depends on initial conditions, not a systematic policy bias. The single MuJoCo run had sampled one draw from that distribution, so its magnitude could not be compared across versions as if it were a property.
Change
Evaluation rule: before classifying drift as systematic, run multiple seeds and examine the sign distribution; single-trajectory drift magnitudes are samples, not properties.
Outcome
The v2-vs-v4 drift "regression" was reclassified as not-established; later drift work (hip_roll l+r bias) used cross-policy, cross-seed evidence instead.
Mechanism
Symmetric dynamical systems can settle into either of two mirrored limit cycles; the selected cycle is decided by noise and initial state. A statistic whose sign is initial-condition-dependent has no meaning as a single sample - only its distribution does.
Applies when
- comparing heading drift or lateral drift across policy versions
- a symmetric-looking behavior shows a consistent direction in one run
- deciding whether to fix "drift" in reward or calibration
“偏航反而变差(−41° → −84°):注意 Isaac 侧 32 env 的逐 env 偏航是正负混合(20/12)、均值 ≈0,说明这是极限环性质(方向随初值)而非策略偏置 —— MuJoCo 单次跑测到的是分布里的一个样本,不能当作系统性偏差。要判断需多种子统计。”
train/WALK_DIAGNOSIS.md § walk_v4 独立验收 读法 (偏航) An edge-triggered landing penalty missed the tail and fired after the harm - penalize overspeed continuously inside the contact window
penalize-tail-before-touchdownPenalties aimed at impact/violation events must (a) price the excess over a threshold, not the mean, and (b) be active on the approach (state-gated window), not triggered by the event - check your control rate can even see the event you are penalizing.
Symptom
The v7 landing penalty (vz^2 on the contact-force rising edge, weight -10) did not bite: landing-velocity 95th percentile stayed at 2.61 m/s against a 0.3 target.
Context
Two structural faults were identified: (1) it penalized the MEAN over sparse events - many soft landings dilute the occasional violent slam, while the damage (GRF peaks, motor peak load) lives in the tail; (2) it fired AFTER touchdown - at 50 Hz evaluation the rising edge is aliased by physics decimation, so the read vz is often the already-decelerated post-impact value: underestimated, and with no shaping gradient before contact. Replacement: continuous penalty while the sole is inside a height gate (h < 0.03 m): relu(-vz - 0.30) - only the excess over an allowed approach speed is penalized (tail only), and gradient exists for several frames BEFORE touchdown. The sole-height computation again subtracts the 0.0585 m link offset ("WALK_DIAGNOSIS 坑#1, 别再踩"); the edge-triggered version was kept as a diagnostic only.
Change
feet_landing_vel reformulated: edge-event vz^2 -> in-window relu(-vz - v_ok) with v_ok 0.30 (conservative vs the sqrt(L)-scaled human value ~0.19, to be tightened after passing), h_gate 0.03, weight unchanged -10.
Outcome
The failure analysis of the first form was written before the second was trained; the v_ok escalation path (0.30 -> 0.45 if the robot becomes afraid to land) was pre-registered in the risk table.
Mechanism
Sparse-event mean penalties optimize the average case while the constraint is a quantile; and any penalty evaluated only at/after a discrete event gives the optimizer no gradient along the approach trajectory that determines the event. A state-gated continuous excess penalty fixes both: it prices only violations and shapes the approach.
Applies when
- impact/landing penalties fail to move tail percentiles
- a penalty is triggered by contact edges at a coarse control rate
- designing constraint-style penalties for rare violent events
“罚的是均值路径:上升沿是稀疏事件 … 大量软着陆稀释偶发猛砸;而伤害在尾部 … 罚在触地后:50 Hz 评一次,上升沿被物理 decimation 混叠,读到的 vz 常是撞完已减速的值——既低估,又没有触地前的塑形梯度。”
train/WALK_V8_SPEC.md § 2. 改动 B — 落地惩罚改罚尾部、罚在触地前 Every gate on a penalty is an exit - to stop paying a stance tax the policy parked 2 deg outside a 30 deg uprightness gate (lunging), and, from scratch, just under a height gate (crouching); a positive band and an always-on guard fixed both
penalty-gate-is-an-escape-hatchNever gate a penalty on a state the policy can leave by getting worse; use always-on guards for what must never happen and positive, gated bands for what you want, and count every gate on a penalty as one more escape route to check in the logs.
Symptom
V2.9 added stance_width_task = relu(0.34 m - foot spacing) x standing gates, weight -10. Three checkpoints scored 0% on acceptance: standing height reached, feet on the ground, angular rate low, but the torso leaned 32.5/32.3/31.9 deg in a fore-aft lunge. The training dashboard read "tax paid off, base_height at full value".
Context
The penalty was gated by uprightness (tilt < 30 deg) and standing height; its tax had no time gate (500 steps x -1.65) while the standing income sat behind a 3 s zero gate (~325 steps), so leaning just past 30 deg lost a little gated income and saved the whole tax. base_height has no upright gate, so the lunge still collected it. The first metric also measured full horizontal spacing, so a staggered lunge counted as "wide".
Change
Two laws written down: a penalty may only carry gates the policy cannot escape by getting worse (make it an always-on guard) or it becomes a positive band ("not earned" is not "escaped"); and width is measured laterally in the base yaw frame. From scratch (V3.1 P1) with the lateral metric but the same gates, the policy parked just under the height gate instead (base_height 1.176/1.5, h ~ 0.30 m against a 0.3264 gate), the beta curriculum never advanced in 1,700 iterations, and the run was stopped early. P1b flipped the penalty into a positive band +2.0 x clamp(lateral / 0.34) x standing gates; P1c added yaw_guard = -5 x relu(|hip_yaw| - 30 deg), always on, no gate, no exemption.
Outcome
P1b: lateral stance 0.364 m, all four categories 100%, MuJoCo mu 1.0/0.4 both 100%. P1c: all six acceptance criteria passed for the first time on the line (hip-yaw saturation 1.2%), the guard's tax converging to -0.016 (almost never touched).
Mechanism
A gated tax that is not paid is saved, so the policy moves to the cheapest state just outside the gate; a gated income that is not earned is simply lost, so a positive band has no exit. HoST's style penalties are ungated or binary - the same law seen from the other side.
Applies when
- adding a penalty multiplied by an uprightness, height, phase or contact gate
- a policy settles just beyond a gate threshold
- training metrics look paid-up while acceptance collapses
“**罚项的门 = 策略的逃生门**。带直立门的负项可以靠"变得更差"(倾出门外) 全时免税;HoST 的 style 罚全部无门控/二值恰是同一律的反面实证。修律: 负项只许挂"变差逃不掉"的门(上限护栏 always-on),或改正向 band (收不到 ≠ 逃掉)。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §46 定案(血统内第四败 + 两条新律) The walking lines' safety setting, power-scale 0.8, broke the recovery policy's full-range contract - it cut the ends of the joint travel (4/50 could not get up) and left the torque spikes untouched; a kp x 0.9 gain profile inside the trained kp band did the job
power-derating-cuts-full-range-contractA deployment derating knob means something only relative to the action contract: before reusing a line's "safe setting" on a new skill, check what it does to that skill's reachable range and to the term that makes the spikes, prefer a gain change inside the band the policy was randomized over, verify it in simulation, and re-decide when the contract changes.
Symptom
After the violent first real get-up (2026-08-09), the recovery policy needed a gentler setting for its next hardware test, and the walking and omni lines' standard derating - deploying at power-scale 0.8 - was the obvious candidate.
Context
The V0 recovery contract maps actions to absolute targets over the full joint range: a = +/-1 lands exactly on the URDF limits, and standing puts the knee at the clip. Candidates were compared on R3.1 in MuJoCo (5 categories x 10 seeds) on 2026-08-10 before any hardware time was spent.
Change
A new gain profile, rl_kp090 (kp x 0.9, kd unchanged), recorded in robot.yaml as the recovery hardware-test setting, with power-scale 0.8 explicitly banned for recovery.
Outcome
kp x 0.9: 48/50 got up; median torque demand on hip_pitch/knee fell from 120-125% to 100-104% of the deployment limit; leg-leg contact frames 2,152 -> 1,095; the change sits inside the +/-10% kp randomization the policy trained with. power-scale 0.8: 4/50 could not get up, because under the full-range contract it removes the ends of the travel (the deep squat's tucked legs, the straight standing knee), and the torque spikes (kp x error) did not fall at all. When the line moved to the beta-anchored contract, rl_kp090 was declared a V0-era choice that does not fit (beta is calibrated at kp 30) and deployment returned to rl_default; the deploy switch applies power scaling to the walking side only.
Mechanism
A power scale multiplies the action, which under an absolute full-range mapping shrinks the reachable workspace instead of softening the actuator; the spikes come from the proportional term on large errors, which only a gain change reduces - and a gain change inside the trained randomization band stays in distribution.
Conflicts
The undated operator runbook still carries an R3.1 "B comparison" command at power-scale 0.8 beside the rl_default baseline; the sources do not say whether it was written before the ban or was ever run.
Applies when
- reusing a power, torque or action scale from one skill on another
- a policy whose actions map to absolute targets over the full joint range
- choosing a gentler setting for a first or second hardware trial
“kp×0.9 / kd 不动 —— recovery_r3_1 成功 48/50, τ 需求中位 hip_pitch/knee 120~125% -> 100~104% 部署限, 腿-腿接触 2152 -> 1095 帧; ±10% 在训练 kp DR 带内. ⚠️ power-scale 0.8 对 recovery **禁用**: 全 ROM 契约下 0.8 砍的是行程 端点 (深蹲收腿/站直够不到), 实测 4/50 起不来, 且尖峰 (kp·err) 一点不降 —— 它是 walk/omni 的安全档, 不是 recovery 的.”
git:Lucen-recovery@origin/recovery:robot.yaml § gain_profiles 注释: recovery 真机测试安全档 (2026-08-10) / rl_kp090 A reward on a quantity the actor cannot observe teaches "produce less of it", never "correct it" - closed-loop correction needs an outer loop
reward-observability-limitBefore adding a reward, check the actor can observe (or infer) the quantity: unobservable-error rewards buy only average suppression - route correction tasks to an outer loop whose commands stay in distribution, and do not break a frozen contract to add an observation a deploy-side loop can supply.
Symptom
Heading kept drifting despite world-frame yaw rewards, and a reviewer proposed heading-error rewards - raising the question of what yaw shaping can even teach this actor.
Context
The adopted architectural verdict: the actor's 45-dim base observation cannot see accumulated heading at all - projected_gravity is invariant to rotation about the gravity axis, and omega_z is a rate, not an angle. World-frame yaw-rate rewards are therefore privileged shaping that can only teach "少产生旋转" (generate less rotation), never "偏了以后拉回原线" (pull back to the line after drifting) - the policy cannot represent the error it would need to correct. The S1 gate (<=5 deg / 10 s) demands exactly the former, so the stack is right for its gate; active heading correction is assigned to the deployment outer loop (--heading P-loop converting heading error into in-distribution wz commands) plus small-wz training - and the 215-dim contract is explicitly NOT extended with a heading observation ("契约不加 heading 观测,冻结不动"). The reviewer's companion bias hypothesis was adjudicated with data: drift is bimodal - a basin mechanism decides whether you leave (seeds vary +/-16-46 deg vs -385 to -391 deg), and once out, rotation direction is constant (weight chirality; candidate root: the phase clock always swings left first).
Change
Yaw shaping kept as rate-tracking (three-layer stack); heading correction owned by the deploy outer loop; contract frozen; the "which behaviors need an outer loop" question settled by observability analysis rather than reward tuning.
Outcome
Stopped a contract change and a futile reward direction; drift work split correctly into rate-suppression (trainable) and error correction (outer loop), consistent with the earlier measured 10x drift reduction from the deploy-side loop.
Mechanism
A policy can only condition on its observation sigma-algebra; rewards on functions outside it shift the marginal action distribution (open-loop average effects) but cannot create feedback on the unobserved variable. Whether to add an observation, an outer loop, or accept average-shaping is decided by the task's gate: suppression gates need shaping, correction gates need the variable in some loop's view.
Applies when
- adding rewards on accumulated/世界-frame quantities (heading, position)
- deciding between a new observation, an outer loop, and shaping
- a drift symptom persists across reward-weight changes
“actor 的 45 维基座观测不到累计航向(projected_gravity 对绕重力轴旋转不变,ωz 是速率不是角度)——世界系 yaw 奖励是特权塑形,只能教「少产生旋转」,不能教「偏了以后拉回原线」。… 主动纠偏闭环 = S3 把小 wz 进分布 + deploy --heading 外环 … 215 契约不加 heading 观测,冻结不动。”
train/OMNI_V0_SPEC.md § 3. 评审④判决(2026-08-06,S1.3 开训前) A torque-tail penalty was paid for by bracing the legs against each other - the second simulator's leg-contact count caught it, and the first explanation ("the trainer can't see self-collision") was retracted from the run's own config
torque-penalty-bought-by-leg-bracingWhen a penalty lowers a demand metric, look for what the policy traded to get there - keep self-contact frames and foot spacing as standing sim2sim readouts - and check any "the trainer cannot see X" explanation against the run's resolved config before it enters the record.
Symptom
After R3.1's torque_headroom term collapsed the demand tail, MuJoCo success fell 100 -> 98% and leg-leg contact frames at mu 1.0 rose 750 -> 2,190 (worst rollout 177 -> 450). The one failure (prone seed 2) had the legs crossed, one foot on the other leg, trapped at 0.067 m - visible on video.
Context
Across the ten prone seeds, foot spacing and leg-leg contact frames were monotonically anti-correlated, and the failure was the extreme of the series. Pulling the legs toward the midline shortens the hip_roll lever arm and lowers torque demand. At the time the spec explained it as Isaac training without self-collisions ("a free lunch in a simulator without self-collision").
Change
Leg-leg contact frames and foot spacing were tracked in every MuJoCo gate; R3.2's candidates were "train with self-collision on" or "a minimum leg spacing term" - not stacked.
Outcome
The next rung's joint-velocity penalty incidentally erased the dependency (2,190 -> 86 frames). On 08-10 the runs' logged env.yaml showed enabled_self_collisions true in both r3_1 and v2_2 (inherited from walk v10): the tangle was physically learned bracing, visible to both simulators, and the Isaac/MuJoCo contact-count gap was mesh and contact fidelity. The "self-collision debt" narrative was withdrawn for the whole line.
Mechanism
A penalty on demand rewards any configuration that lowers demand; legs pressed together act as a mutual support that fails when contact geometry shifts slightly.
Conflicts
§24 attributes the dependency to self-collisions being disabled in training; §36 retracts that from the runs' env.yaml ("§24's mechanism explanation was wrong") and keeps the older sections unedited as history.
Applies when
- a torque, impact or energy penalty improves its metric and cross-sim success drops
- legs or links approach each other after a regularization change
- an explanation relies on a simulator setting nobody checked in the run config
“prone 十个 seed 逐条看,脚距与腿-腿接触帧数单调反相关, 而唯一失败的那条正是最极端的一条 … 机制上说得通:把腿收到身体中线附近能缩短 `hip_roll` 力臂、降低力矩需求”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §24 代价:MuJoCo 成功率 100% → 98%,病因是两腿卡住 A plateau in a training curve was a population mix, not a half-learned skill - 60% standing at 0.372 m and 40% sitting at 0.19 m - and a category at hard zero stayed at zero through 3,000 more iterations
zero-partial-credit-is-not-an-iteration-problemBefore buying iterations for a plateau, split the metric by category and check whether it is bimodal; a category at hard zero with no partial credit is missing a capability or a reachable state, and more iterations under an unchanged config will only polish the categories that already work.
Symptom
After R0.1 the training-side base_height sat near 0.29 m and the curve was still climbing at the iteration cap, which read as "train it longer".
Context
Candidate A (user decision) was a child-run from R0.1's last checkpoint with zero config change - the logged env.yaml files differ only in log_dir - for 3,000 more iterations (R0.2). The per-category acceptance split was already available: prone had scored 0/156 with no partial credit.
Change
Continue training unchanged, then read the result by category rather than by the pooled curve.
Outcome
supine 91.5 -> 96.4%, side 82.2 -> 87.9%, get-up 0.96 -> 0.84 s, pose error 0.91 -> 0.54 - all improvements to categories that already stood. Prone stayed 0/153; mid 55.9 -> 41.2% was within noise (n=34). Height by category was binary - standing groups 0.372/0.373 m, seated groups 0.187/0.194 m, nothing between - so the pooled 0.29 was 0.61 x 0.372 + 0.39 x 0.19 = 0.30 (measured 0.307): six in ten standing, four in ten sitting. The rendered prone episode was still kneel-sitting at t = 8 s.
Mechanism
The pooled mean of a binary outcome only moves when the mix moves; PPO kept polishing the subpopulation that already succeeded while the failing one produced no advantage signal to follow.
Conflicts
R0.2 recorded the missing capability as "prone lacks rolling over"; R0.3's end-state confusion matrix retracted that - prone had righted its torso in 159/159 episodes and was failing to stand from the W-sit. The lesson that iterations could not fix it holds; the named cause was wrong.
Applies when
- a training curve plateaus while acceptance shows one category at zero
- deciding between "train longer" and "change something"
- pooled training metrics are read as the typical episode
“**分类别 h 中位把"平台 = 人口混合"钉死了**:数值是**二值**的 —— 站立组 0.372/0.373,坐姿组 0.187/0.194,**中间没有过渡态**。 … **这也是本仓此后读该指标的通用告诫:全体混合的期望会把 双峰分布平均成一个不存在的中间值,必须分类别看。** … **结论:A 不能过门,原因确定为 prone 缺"翻身"这一技能,不是迭代不够。**”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §13 R0.2(recovery_r0_2,child-run 续训):A 走完了 —— 推不动 prone The +/-50 mm lateral COM randomization meant to spread the legs coincided with legs pulling IN - rolled back per its own pre-registered contract
com-dr-rollback-on-symptomWhen adopting a DR value that covers no local measurement, write its intent and rollback trigger into the config at adoption time; roll it back as the control arm the moment the symptom contradicts the intent, and promote the symptom's metric into the acceptance battery.
Symptom
After v7 adopted the reference developer's oversized lateral COM randomization (+/-50 mm) explicitly to force leg spread, the real robot's legs narrowed instead - lateral mean 154 mm / closest 107 mm in sim (nominal 214.5), narrower still on hardware with occasional leg contact.
Context
The rollback was clean because the adoption had been honest: the robot.yaml comment recorded the intent AND that the +/-50 value covered no local measurement (only a 16/7 mm measured offset existed; even the prior widening to +/-20 was subjective), plus the reference's own reported side effect (base sway) and the note "这一项要单独跑、 单独归因". When the opposite symptom appeared, v8 returned y to +/-20 mm as the control arm ("要么没起作用、要么帮了倒忙 … 按约定退回做 对照"), kept x/z untouched (a noise-level difference not worth another variable), and named the second suspect: the landing penalty itself, via the reference's own three-link chain (landing penalty -> stance narrows -> spacing penalty needed). A gate lesson was booked in the same table: v7's sim numbers had ALREADY crossed the line (154/107 vs v5's 182/147) - "这个指标本可拦下 v7" - so foot-distance became a standing acceptance row (min >120 mm, zero leg-leg contacts).
Change
base_com_offset_m y: 0.050 -> 0.020 (x/z kept), regenerated through the export tool rather than hand-editing derived files; foot-distance acceptance row added.
Outcome
A borrowed DR lever with no local measurement basis was retired the moment its symptom contradicted its purpose, at single-variable cost; the metric that would have caught it pre-hardware entered the gate.
Mechanism
DR ranges shape behavior through the policy's robustness strategy, which is jointly determined with every reward term; a lever that forces stance width on one robot can be dominated by a stronger narrowing pressure (landing softness) on another. Levers adopted without local measurement must carry their own rollback trigger, because there is no nominal to argue from when they misbehave.
Conflicts
Causality is not fully closed in the source: the narrowing may come from the landing penalty rather than the COM lever ("腿距的第二嫌疑人是 ④ 本身"); the rollback is the pre-agreed control experiment, not a verdict that the lever caused the narrowing.
Applies when
- importing DR ranges or behavioral-forcing randomizations from references
- a DR lever's observed effect contradicts its documented purpose
- a sim metric existed that would have caught a shipped regression
“⑥ 的本意 … 是逼策略把脚分开;真机结果是脚向内收且偶发相碰——要么没起作用、要么帮了倒忙。… 注释当时就写了"这一项要单独跑、单独归因"。现在症状出现了,按约定退回做对照。”
train/WALK_V8_SPEC.md § 3. 改动 C — 质心随机化退回(撤销 v7-⑥ 的 y 项) Three hardware accounts locked the run design point - and the knee's real speed ceiling is tau_limit/kd, not the firmware limit
feasibility-accounts-lock-design-pointBefore opening a dynamic-gait training line, compute the full account set - tau_limit/kd effective speed ceilings, joint ROM under the intended reference geometry, and thermal RMS at the duty cycle - and let the accounts lock the design point; move only to pre-registered in-table alternates, re-running the accounts first.
Symptom
The run line was believed to require a firmware raise of the RS06 speed limit (10 rad/s) as a hard precondition, and the feasibility script's motor-envelope scan had marked 80/100 mm foot-lift cells "physically feasible".
Context
Three added accounts re-decided everything. (1) Damping tax: in MIT mode tau = kp*(q_des-q) - kd*qd, so sustained rotation is capped at tau_limit/kd = 12/1.5 = 8 rad/s - below the firmware's 10; at peak speeds 6.7-7.9 rad/s the damping term alone eats 10.1-11.9 N*m (84-99% of the torque limit). "提固件 limit_spd 越不过这道税 —— 它是 kd 与限扭的比,不是固件旋钮." (2) Joint ROM: the feasibility script had checked motor envelopes but NOT joint range - the ankle-pitch ROM caps 1:2:1 leg-shortening lift at 62 mm (soft) / 77 mm (hard), so the 80/100 mm "feasible" cells were voided; also firmware-independent. (3) Ankle thermal: duty 0.40 puts ankle RMS at 87% of continuous rating (0.35 -> 93%); long-period big-stride cells hit both ankle torque peak and heat. Verdict: firmware raise DEQUEUED (50 mm design point needs knee 6.7-7.3 < the 8 rad/s effective ceiling < firmware 10); vel_limit stays 10 so sim == robot. The three accounts uniquely lock the design point - 50 mm lift / T 0.60 s / duty 0.40 - "三笔账 唯一锁定,不是调参空间", with pre-registered alternates allowed only inside the table and only after re-running the accounts.
Change
Design point frozen from accounts; hardware precondition reversed by arithmetic rather than by test; reference amplitude (0.84 rad = FK inverse of 50 mm) derived, per-joint action scales sized to the required travel (knee 0.9, hip_pitch 0.6, ankle deliberately NOT amplified - hard limit is adjacent).
Outcome
A firmware work item left the critical path; an infeasible region of the design space was closed before any training; the remaining risk (knee tracking lag from the damping tax) was pre-registered with its own criterion and in-table fallback (duty 0.35) - "这不是'奖励没调好', 是 plant 账".
Mechanism
PD actuators in MIT mode pay kd*velocity out of the same torque budget that tracks position, so the effective speed ceiling is a ratio of configuration constants, invisible to firmware settings; and feasibility is the intersection of ALL constraint families (torque envelope, joint ROM, thermal RMS) - a scan that omits one family certifies impossible cells.
Applies when
- planning running/jumping or any high-rate gait on PD actuators
- a firmware or hardware upgrade is assumed as a training precondition
- a feasibility scan covers motor limits but not ROM or heat
“膝的有效速度顶 = τ_limit/kd = 12/1.5 = 8 rad/s,不是固件的 10。… 提固件 limit_spd 越不过这道税 —— 它是 kd 与限扭的比,不是固件旋钮。… 可行性脚本只查了电机包络没查关节 ROM —— 其 80/100mm 的"物理可行"格作废。… 判决:RS06 提固件对 run v0 不是前置,出队”
train/RUN_V0_SPEC.md § 1. 硬件账判决 / 2. 步态设计点 Privileged signals (true velocity, foot force, foot height) go to the critic only
observation-honesty-critic-onlyTreat the actor observation vector as a hardware contract: every element must exist on the real robot with realistic noise; privileged simulator truths belong in the critic only.
Symptom
Policies trained on ground-truth base linear velocity work in sim and fail on hardware, where only a drifting IMU and encoders exist - the policy has learned to depend on a signal that does not survive deployment.
Context
Many open-source locomotion stacks feed simulator ground-truth linear velocity to the actor. The reference team refused: the real robot has no ground-truth velocity. Asymmetric actor-critic keeps the training benefit of privileged information without deploying the dependency.
Change
Route ground-truth velocity, foot contact forces, and foot heights to the critic only; the actor observes exclusively signals that exist on hardware (IMU-derived quantities, encoders, commands, previous actions).
Outcome
Recorded as adopted doctrine in Lucen's experience log; the trained actor's input contract matches what the real robot can actually produce.
Mechanism
The critic is discarded at deployment, so it may consume any privileged state to reduce value-estimation variance; the actor's observation set is a deployment contract - anything in it that hardware cannot supply (or supplies with different noise/drift) becomes a train/deploy distribution shift the policy was never trained to handle.
Applies when
- designing actor/critic observation spaces
- reviewing a config where the actor sees base_lin_vel or contact forces
- sim policy is strong but real robot drifts, oscillates, or falls without obvious actuator cause
“很多开源代码库把真值线速度喂给策略，Asimov 团队没有，因为真机上没有真值速度，只有会漂的 IMU 和编码器；用完美速度训练出来的策略会依赖它，然后在硬件上失效。真值速度、足底力、足高统统只给 critic”
Experience.md § 观测空间的诚实性 (line 7) Write each config's expected hardware signature before the session - and if reality disagrees, change the books, not the conclusion
preregistered-real-expectationsBefore hardware runs, write per-config expected signatures and the disagreement rule (hardware outranks sim; discrepancies get recorded, not reconciled); validate the harness by checking it reproduces at least one known real behavior.
Symptom
Hardware impressions are easily narrated after the fact; without written expectations, any real-robot outcome can be made to "match" the sim story.
Context
The S2 acceptance sheet carried a section titled "sim 侧预注册预期 (事后核对, 不许事后改)" - per-configuration behavioral signatures written before the session: s1e@0.8 the disturbance king (push 159/160, zero chirality, all-mu 20/20) at the cost of speed gates 0/20 and zero-command wander ~0.98 m with -29.5 deg/20 s rotation; fric-3000 "walks accurately but is easier to push over"; fric-2400 neither. Credibility check included: the sim harness had reproduced the already-recorded real behavior (pace in place + right drift + net rotation -30 deg/20 s), which "提高本单全部预期的可信度". The anomaly clause fixed the epistemics in advance: if results systematically disagree with sim, "不改结论改账" - don't massage the conclusion, write the discrepancy into the books, and per the earlier zero-warning lesson, hardware wins.
Change
Every hardware session ships with a pre-registered expectation table (signature per config), a baseline-match credibility check, and a written precedence rule for disagreement.
Outcome
The A/B session became falsifiable: agreement confirms the proxy, disagreement is booked as a proxy-bias finding rather than argued away.
Mechanism
Pre-registration converts qualitative hardware sessions into tests of the sim-to-real mapping itself; a reproduced known behavior calibrates trust in the remaining predictions; and fixing "who wins on disagreement" beforehand prevents authority from drifting to whichever source flatters the plan.
Applies when
- planning any hardware acceptance or A/B session
- the sim harness's credibility in this regime is unestablished
- post-session write-ups tempt narrative fitting
“⚠️ sim 复现了真机已记录的「原地踏步 + 右漂 + 净旋 −30°/20s」—— harness 与真机行为对得上, 提高本单全部预期的可信度。… 结果与 sim 系统性不符 → 不改结论改账: 写进 README 该节, 按 「Isaac 指标三次零预警」的教训, 以真机为准。”
train/REAL_RUN_S2.md § 2. sim 侧预注册预期 (事后核对, 不许事后改) / 4. 异常处置 Armature must be N^2 x rotor inertia, never 0 - measure it no-load
armature-n2-rotor-inertiaEvery geared actuator carries N^2 * I_rotor of reflected inertia at the joint; set armature from a no-load measurement, never leave it 0 and never guess it.
Symptom
Sim joints accelerate more easily than real joints; old MJCF had armature = 0 (rotor reflected inertia entirely unmodeled), a systematic sim2real gap on every joint.
Context
Original hand-written MJCF plant used armature 0. The team derived and then measured the correct value: torque needed at the rotor is I_rotor * N * alpha; after the N:1 gearbox the output shaft "feels" an extra N^2 * I_rotor of inertia. With a 9:1 reduction that is an 81x amplification of the rotor inertia, far too large to ignore.
Change
Set per-motor armature from no-load (motor out of the robot) measurement instead of 0: RS06 = 0.0070 kg*m^2, RS02 = 0.0032 kg*m^2, RS00 = 0.0015 kg*m^2. Landed together with measured friction as the first fully-measured plant parameter set.
Outcome
Plant parameters "第一次全部来自实测" (first time all from measurement); became the frozen plant baseline for all subsequent training generations.
Mechanism
Reflected inertia scales with the square of the gear ratio: the rotor spins N times faster than the joint, so its kinetic energy (and the torque needed to accelerate it) appears N^2 larger at the output. Omitting it makes simulated joints unrealistically fast/light, so policies learn action rates the real actuator cannot deliver.
Applies when
- building or auditing a simulation plant model for a geared/QDD actuator
- sim policy moves joints faster or snappier than the real robot can
- MJCF/URDF review shows armature or rotor inertia set to 0 or a default
“armature 转子反射惯量有问题 在sim里面一定要处理 不能是0，空机测试。转子处需要的力矩 = I_rotor × N × α 经减速箱放大 N 倍后 = N² × I_rotor × α 所以输出轴"感觉到"多了一个 N² × I_rotor 的惯量。 这就是 armature。… 关键是那个平方。减速比 9:1 就放大 81 倍。”
Experience.md § # armature 转子反射惯量有问题 (line 9) FK-verify a borrowed reference's structure, then size its amplitude by the reference's job - it pins phase, the policy adds lift
reference-structure-fk-amplitude-divisionWhen borrowing a reference trajectory: verify its structural claim against your own kinematics (an invariant like flat-foot), assign it the phase-pinning job, and size amplitude low enough that the policy contributes the lift - moving toward a proven foreign value in halves, not jumps.
Symptom
walk_v4 had big knee swing (40-46 deg) but only 18-24 mm foot lift - amplitude without hip/knee/ankle phase coordination; later, walk_v5's real-robot swing ballooned to 73.6 deg (sim 55.7) with violent footfalls - amplitude over-driven by the reference.
Context
Structure first: Humanoid-Gym's 1:2:1 hip:knee:ankle reference was verified on the local model before adoption - the ratio exactly satisfies the locally derived flat-foot constraint hip - knee + ankle = 0, FK-tested at multiple amplitudes with sole pitch 0.00 deg throughout. Amplitude second, and here the first reasoning failed honestly: FK said shorter legs need LARGER reference scale (0.30 for 30 mm lift), and the FK was correct - but the premise was wrong ("FK 没错, 但前提错了"): it assumed foot lift must come from the reference. HighTorque Pi, same scale, uses 0.08 with a 0.02 m foot-height target - proof that lift is added by the policy ON TOP of the reference, whose actual job is pinning the phase relationship. Scale 0.30 made the reference the entire gait: over-constrained and over-driven. The correction went to 0.15, deliberately not Pi's 0.08: "一次只走一半, 留退路" (walk half the distance, keep a retreat).
Change
target_joint_pos_scale 0.30 -> 0.15 as one of v6-minimal's three changes, treating both the footfall force and the lateral kicking (yaw momentum scales with leg swing amplitude).
Outcome
v6 improved landing force 1.72x -> 1.55x, suspended tilt 45.9 -> 23.0 deg, turn-gain asymmetry 70% -> 19%; the later v6-halved-shaping experiment (35 mm -> 4 mm collapse) confirmed the reference still carries the gait's existence on this machine - the division of labor is real but machine-specific.
Mechanism
A joint-space reference plays two separable roles: encoding structure (phase relations that keep the foot flat) and injecting amplitude (energy). Structure transfers across robots and is checkable by FK against an invariant; amplitude is a negotiation with the policy, and over-assigning it to the reference removes the policy's freedom to modulate lift with state.
Applies when
- importing a reference gait / imitation target from another codebase
- reference amplitude reasoning based on leg length alone
- real swing amplitude far exceeds sim's under a strong reference
“FK 没错, 但前提错了。我默认抬脚必须由参考轨迹产生。HighTorque Pi 同尺度机器人 … 用 0.08, 而它 target_feet_height = 0.02 m —— 说明抬脚是策略在参考之上加出来的, 参考只负责钉住髋/膝/踝的相位配合。我们取 0.30 等于让参考本身就是整个步态, 过约束 + 过驱动”
train/WALK_V6_MINIMAL.md § ① target_joint_pos_scale 0.30 → 0.15 Training at scale 0.4 is NOT the twin of deploying 0.5 at power 0.8 - the algebra matches, the learned policy does not
deploy-scaling-not-training-equivalentNever assume deploy-side scalings can be folded into training-time constants ("burning the crutch into training"): the learned optimum depends on the training-time authority, so treat such conversions as full experiments with pre-registered expectations and a sim2sim gate before any hardware.
Symptom
s1g (S1.6) trained from zero at action_scale 0.4 - meant as the "training twin" of the hardware-proven s1c-at-power-0.8 (0.8 x 0.5 = 0.4) - was all green in Isaac (zero falls, reward 117) yet scored 0/3 across all eight checkpoints and 0/20 at 20 seeds in the MuJoCo gate, falling forward at median 1.57 s with a 2.9x speed overshoot.
Context
The pre-registered expectation (survival gate should pass, since the conviction matrix showed s1c@0.8+delay2 all-survive) was cleanly falsified, and the harness was acquitted by controls: --delay 0 fell identically (not a delay fragility), check_contract all green, and s1c through the same harness survived 2/3. The verdict: "「s1c@0.8 = 0.4 训练孪生」的代数等价不成立" - a policy deployed with a derated output still LIVES in the 0.5 internal model it trained under (its value function, its expectations of its own authority), while a policy that starts training with reduced authority learns a different, clip-hugging gait with zero margin for plant differences ("部署端打折的策略活在 0.5 的内模里,训练起点收权限学出的是贴 clip 的 另一套步态,对 plant 差异零余量"). Result: the policy was withdrawn before hardware ("撤回——不上真机"), the lineage root moved back to the 0.5-contract s1c-5500, and this became the C ladder's cited fact-check ("s1g 是 0/20 证伪出局的那一代").
Change
The amplitude-surgery route abandoned; contract kept at scale 0.5; the deploy-side 0.8 crutch later retired on its own merits when the delay-complete s1e generation ran at full power.
Outcome
One training run bought a clean falsification of a plausible algebraic identity; no hardware time was spent on it because the sim2sim gate caught it.
Mechanism
Output scaling commutes with the network arithmetic but not with learning: the training-time scale shapes which gait solutions are reachable and how much clip headroom the optimum keeps. A derated mature policy retains the wide-authority solution executed softly; a from-zero narrow-authority policy finds a different optimum that saturates its smaller envelope - the two are not the same controller in different units.
Applies when
- proposing to move a deployment derating into a training constant
- a scaled-down contract policy hugs the action clip
- Isaac-green / cross-sim-zero results on a re-scaled lineage
“预注册 a) 证伪——Isaac 全绿(零摔/reward 117)但 MuJoCo --delay 2 八档 checkpoint 扫描全数 0/3、iter6500 20-seed 0/20 … 「s1c@0.8 = 0.4 训练孪生」的代数等价不成立: 部署端打折的策略活在 0.5 的内模里,训练起点收权限学出的是贴 clip 的另一套步态,对 plant 差异零余量。”
train/OMNI_V0_SPEC.md § 3. S1.6 判决(2026-08-07 验收) Two machines, one configuration - every gain, offset and torque limit changes only in robot.yaml, whoever edits pushes at once, both checkouts show the same commit before the robot moves, and a pulled policy file is size-checked and synced before power-off
two-machine-config-disciplineTreat the robot's configuration as a versioned artifact with one source of truth, push every change immediately, verify identical commits on every machine before a hardware session, keep hardware limits in the repo and the firmware in sync in both directions, and verify transferred model files (size, digest) before running them.
Symptom
The robot's onboard computer runs the bridge and deploy scripts from its own checkout while training and analysis happen on other machines; a hot fix left on one side, or a half-written file, silently makes the robot run something other than what was evaluated.
Context
The operator runbook's "wall version" of the two-machine discipline: configuration changes only in robot.yaml (calibration offset/sign, gains, torque limits), committed and pushed from the Mac, pulled on the robot, bridge restarted; code is not edited on the robot, and if it is, it is committed and pushed on the spot - nothing unpushed overnight; 30 seconds before every real-robot session both checkouts must show a clean status and the same last commit hash; changing tau_max requires writing the motor's limit_torque too (and the reverse); re-zeroed motors require re-measuring offsets. The recovery line added: after pulling on the robot, check the ONNX is not zero bytes (a lesson from a corruption incident on 08-12) and sync before cutting power; the recovery and main lines are separate worktrees, each pulled with --ff-only.
Change
Operating rules, pinned on the wall and repeated in the hanging checklists ("git pull, both machines on the same commit").
Outcome
The sources record the rules and the incident that produced the size check; they do not record a count of sessions the rules caught.
Mechanism
A policy is evaluated against one configuration; any divergence between the machines, or a truncated file, turns a hardware result into a result about an unknown configuration.
Applies when
- a robot's onboard computer and a workstation both hold the configuration
- someone hot-fixes code or gains on the robot
- model files are copied or pulled to the robot before a session
“改配置只改 robot.yaml(标定 offset/sign、增益、限扭全在里面)→ Mac git commit + push → NX git pull → 重启桥。 … 谁改完谁立刻推,永远不留未推送的改动过夜。 … 每次上真机前 30 秒检查:两边 git status 干净、git log -1 哈希一致。 … 铁律不变:改 tau_max 必须同步写电机 limit_torque(反之亦然);电机重新标零后 offset 必须重测回填 yaml。”
RL系统/FOLLOW THIS copy 2.md § ② 双机维护纪律(贴墙版)