Training Coach
Doctrine
A report may cite any of these as doctrine-N.
doctrine-1Contract freeze and fingerprint disciplineThe policy I/O contract (observation layout, scales, history semantics, action pipeline) is frozen and fingerprinted; every exported policy is stamped and verified; contract changes ship as new versioned profiles that leave old artifacts bit-identical, and old policies run forever under their era's pinned profile.
Case. The 215-dim omni contract was frozen with a three-machine digest; the one contract-level extension (lateral feed-forward) went in as a new `omni_ff` profile with the old profile provably untouched, and the contract checker caught two real wiring bugs before any training (`contract-freeze-and-checker`). A silently changed gait-clock default would have fed old policies a 25% slower clock - closed by pinned legacy profiles (`legacy-profile-pinning`). A stale derived USD forked plant mass 2.2% until an automated source-vs-derived instrument gated it (`derived-asset-staleness-check`). A gain profile is part of the closed loop a policy was trained in and belongs in its stamp; the recovery line's anchored authority was left out of its manifest and recorded as the gap not to repeat (`gain-profile-belongs-in-the-stamp`), and a second policy behind a deploy-side switch made the handoff state itself a contract (`recovery-two-policies-and-a-state-machine`, `walk-recovery-fsm-handoff`).
Coach application. On any proposal touching obs/action semantics, defaults, or derived assets: demand the version/profile plan, the fingerprint update, and the checker extension in the same change; flag any old artifact that would run under new defaults.
doctrine-2Attribution by resolved training params - never eval-override knobsCapability differences between lineages are explained only by digging each lineage's *resolved* training configuration and eliminating columns; evaluation-side override knobs (kd-scale, power-scale, cycle-time) act on the plant for *every* policy and may serve as deployment mitigations but never as explanations.
Case. Low-friction robustness across 8 lineages x 3840 cells was traced to kd DR *bandwidth* - every lineage had ground friction pinned to (1.0,1.0), so "trained friction" could not be the axis; the parameter axis and the plant axis were explicitly separated after the first attribution conflated them (`kd-bandwidth-mu-law-attribution`). "Weak turning" on hardware was a power-scale plant effect, not a training gap (`deploy-knob-attribution-before-retraining`); slowing the deploy clock was out-of-distribution, not a feature (`cycle-time-override-is-ood`). The ground truth for what a run trained under is the logged per-run config, not the source tree (`resolved-config-is-source-of-truth`).
Coach application. Whenever asked "why is lineage A better", require the resolved-param table first; kill zero-variance columns; refuse explanations phrased in eval-knob terms; when a knob helps, label it deployment mitigation.
doctrine-3PASS gates become constraints; FAIL gates become objectivesOnce a skill passes its gate, that gate converts into a standing regression constraint (budget <= 2/20 against the parent baseline) for all later training; gates currently failing are the only legitimate objectives of the next rung.
Case. The C ladder ran one frozen 13-cell x 20-seed matrix at every rung with promotion = "new skill PASS and old skills within regression budget"; C1 was stopped and re-rooted precisely because it trained away the root's backward PASS (`fixed-acceptance-matrix-per-rung`, `preregistered-stop-criteria-per-rung`). The C4 product shipped only at 260/260 cells with zero regression.
Coach application. Keep the ledger: every PASS adds a constraint row; propose rungs only against FAIL rows; treat any constraint violation as stop-and-attribute, never "the next rung might win it back".
doctrine-4One variable per ladder rung - counted against what the checkpoint sawA rung changes one variable, where "one" is counted against the checkpoint's actual training state, not against the current config's diff; batching is allowed only when each change owns a disjoint symptom space with a pre-registered ablation order.
Case. Two rungs failed identically because resuming s1e-500 under the evolved config silently added four plant variables the checkpoint had never seen ("单变量纪律不只看「我改了什么」,还要看「checkpoint 见过什么」" - `resume-state-dr-audit`). v8 legally batched four orthogonal fixes with a written ablation order (`orthogonal-batch-with-ablation-order`); v9 spent one run completing a 2x2 factorial so either outcome convicted a factor (`fill-the-missing-factorial-cell`); v10b's three-way ablation wrongfully convicted the clock and had to be retried fairly.
Coach application. Before any resume: diff cfg against the checkpoint's logged training state. Before any batch: require the symptom-ownership map and ablation order in writing.
doctrine-5Pre-register risks, readings, and stop criteria before the ladderBefore a ladder or risky rung, write down the known risks, the interpretation of every plausible outcome, and hit-any-one stop criteria - frozen before training, tightened when priors say results should come fast.
Case. The C ladder opened with three numbered risks including the exact falsification condition for its own root choice; A/B arms carried "预注册读法(事后不改)" tables; a level expected to fail was run anyway for its pre-registered diagnostic value (`preregister-risks-and-fork-readings`). Stop criteria caught C4-redo rungs at +200 instead of full caps (`preregistered-stop-criteria-per-rung`); hardware sessions pre-registered per-config expected signatures and the disagreement rule "不改结论改账" (`preregistered-real-expectations`, `feasibility-accounts-lock-design-point`).
Coach application. Refuse to open a rung without the written risk/reading/ stop block; after results, read conclusions off the pre-registered table and flag any post-hoc reinterpretation.
doctrine-6Plant parameters are measured, never inventedEvery plant number carries measurement provenance: armature = N^2 x rotor inertia from no-load tests, friction split by rig and by API column, torque limits shaped by per-joint gait peaks, latency traced through the real pipeline, masses weighed - and DR bands are additive around the measured nominal, sized to the measured dispersion.
Case. Guessed friction was 2.5x low and guessed damping 5x high (`friction-measured-not-guessed`); armature had been 0 with a 9:1 gearbox (81x reflected inertia, `armature-n2-rotor-inertia`); a uniform torque derating was "the wrong shape" vs measured peaks (`torque-limit-shape-by-measured-peaks`); the delay implementation itself was a wrong plant for a whole lineage (`latency-lerp-reverse-extrapolation`); the run design point was locked by three accounts including the tau_limit/kd speed ceiling (`feasibility-accounts-lock-design-point`); identified friction had to land in the right simulator API columns to act at all (`sim-api-friction-columns`). The recovery and one-leg lines opened with the same kind of accounts before any reward existed - a connected static path and the torque along it for an armless get-up, and the gains single support needs to be holdable at all (`get-up-feasibility-accounts-before-training`, `single-support-gain-authority-probe`).
Coach application. For any plant value in a config review, ask "measured how?"; reject absolute ranges with no nominal; check API column mapping and derived-asset regeneration whenever measured values land.
doctrine-7Sim2sim gate before sim2real - under deployment conditionsEvery checkpoint passes a second, independently built simulator before hardware, and both the gate and the smoke loop run under the measured deployment conditions (real pipeline delay, honest contact parameters, the deployment gain/power profile).
Case. The standing order "先sim2sim 再sim2real" (`sim2sim-gate-before-sim2real`); acceptance flipped to match hardware only under measured condim/torsional friction (`eval-plant-honesty-contact-params`); gates moved permanently to `--delay 2` after the kicking incident (`pipeline-latency-is-plant-not-dr`); and the harness itself must be audited - a frame-convention bug in the cross-sim evaluator invalidated a whole line of verdicts (`body-frame-velocity-api-audit`). The recovery line's second simulator caught a torque penalty paid for by bracing the legs together (`torque-penalty-bought-by-leg-bracing`), and a 1.8x torque disagreement between the two plants stayed binding because its one surviving explanation was never tested (`torque-disagreement-between-simulators-unresolved`).
Coach application. Block any hardware request lacking a second-sim PASS at deployment conditions; when sim2sim and training-side metrics disagree, treat the evaluator as a suspect too.
doctrine-8Observation honesty - the actor's inputs are a hardware contractThe actor observes only signals the real robot produces with realistic noise; privileged truths go to the critic; history windows are estimators and must train under plant variation; rewards on quantities the actor cannot observe buy only average suppression, never closed-loop correction.
Case. Ground-truth velocity/forces went critic-only (`observation-honesty-critic-only`); frame_hist under zero DR memorized the trainer's plant fingerprint - 0/20 transfer (`history-obs-needs-plant-variation`); world-frame yaw rewards could not teach pull-back because heading is unobservable to the actor - correction was routed to the deploy outer loop instead of breaking the contract (`reward-observability-limit`, `deploy-heading-loop-and-align-training`).
Coach application. Audit every actor-obs element for hardware existence; require minimal plant jitter whenever history/recurrence exists; for each reward, ask "can the actor see this error?" and route correction tasks to outer loops.
doctrine-9Reward economics are audited in realized currencyReward design decisions are made on realized per-step magnitudes under the actual policy and command distribution: price the do-nothing optimum before adding a mode, compare achieved values to the computed ignore-floor, calibrate thresholds between measured healthy and sick distributions, and ship every new penalty with a withdrawal clause.
Case. feet_air_time at weight 2.0 realized 0.038 vs tracking 1.2 - drag was rational (`realized-contribution-audit`); ignoring a vy command cost 28-180x less than ignoring vx until a gated tracking term was added (`reward-cost-of-ignoring-audit`, `gate-new-reward-terms-by-command`); achieved-vs-floor separated "never learned" from "priced out" (`ignore-floor-diagnosis`); the foot-distance wall was placed between measured healthy (0.6% tax) and sick (55%) policies (`calibrate-threshold-between-healthy-and-sick`); the landing penalty carried a pre-registered stand-down condition and actually stood down (`calibration-threshold-with-withdrawal-clause`); two clearance terms were inert until zero-points and gate occupancy were checked (`inert-reward-term-audit`). A get-up policy sat because three gated terms paid the seated pose 84% of the return and the one term that could tell sitting from standing was an exp kernel reading 4.6e-5 at the real error (`seated-basin-dead-exp-kernel`); a torque-tail term was weighted by its measured steady value beside a peer term after the estimate proved 12x off (`tail-torque-needs-hinge-on-computed-demand`).
Coach application. Never discuss weights in the abstract: demand the realized-contribution table, the ignore-floor number, and the healthy-pay calibration before any reward edit is approved.
doctrine-10The zero-cost option must be the desired behaviorFor every penalty, name what the zero-cost option is; penalize failure events (slip, saturation excess, contact in flight windows), never the motion or joints that healthy behavior uses; make degenerate strategies fatal via termination where penalties cannot price them out.
Case. Joint-usage penalties for drift taxed a 1.4%-of-momentum channel 2.7/step and collapsed training; the slip penalty costs a non-slipping gait exactly zero (`penalize-the-slip-not-the-joint`). A frozen-at-clamp joint pays zero action-rate forever - only a pre-clip saturation penalty flips the cheat economics (`saturation-cheating-zero-rate-cost`). Ungated phase shaping made standing 42x more expensive than stepping and cooked the hip motors (`moving-gate-42x-stand-tax`); crouch-shuffling lived until a height termination deleted it (`termination-closes-degenerate-basin`). A gated penalty is an exit: the policy parked just outside an uprightness gate, then just under a height gate, to stop paying a stance tax, and only a positive band plus an always-on guard closed both (`penalty-gate-is-an-escape-hatch`); a soft-limit penalty that charged the standing pose itself bought a 4.1 deg lean (`soft-limit-penalty-charges-nominal-pose`); an unpriced foot attitude was spent on edge-standing (`unpriced-foot-attitude-is-a-free-variable`); and the one-leg line listed its cheapest cheats before training and still met one through a zero-gradient band (`enumerate-cheapest-cheats-before-training`, `binary-band-reward-fake-touchdown`).
Coach application. Run the "零代价的选项是什么" audit on every proposed term; convert motion taxes into event-conditional penalties; check the termination set against each known degenerate strategy.
doctrine-11Measurement discipline: independent referees, signs, distributionsA disputed measurement is adjudicated only by an independent algorithm from raw state; directional ability requires sign-antisymmetry under command reversal; bimodal metrics are reported as mode shares (never medians, never 3 seeds); ratios are not comparable when totals change; reward values compare only within one command distribution; single chaotic events never cross machines.
Case. The triple reversal - a good metric was "refuted" by a sibling metric that shared the disease (`independent-referee-for-metric-disputes`, `body-frame-velocity-api-audit`); same-signed +/- responses were bias, not turning (`same-sign-response-is-yaw-bias`); the swing median sat in a bimodal gap (`median-hides-bimodal-distribution`); "v6 is jitterier" died on absolute energies (`ratio-metrics-need-absolute-check`); yaw gain measured 15x wrong in an oscillating frame (`heading-integral-not-body-rate`); a 44% improvement evaporated under same-distribution comparison (`same-distribution-reward-comparison`); drift direction was a limit cycle (`multiseed-sign-test-for-drift`); a cross-machine push cliff was chaos (`single-impulse-recovery-is-chaotic`).
Coach application. Before accepting any surprising number: ask for the independent recomputation, the sign pair, the distribution shape, and the comparison conditions. Retract in writing when a metric falls.
doctrine-12The deployment pipeline is plantIrreducible pipeline properties - action latency, rate limits, power/torque scaling, teleop command mappings - are part of the nominal plant, modeled from day one and reproduced in every gate; deploy-side scalings are crutches that flag unmodeled plant, and they cannot be algebraically folded into training constants.
Case. Right-leg kicking was over-trained-delay x loop gain; power 0.8 was a gain-reduction crutch that retired when the delay was modeled (`pipeline-latency-is-plant-not-dr`); power derating damages non-forward axes first (`power-scale-hurts-nonforward-axes`); training at 0.4 scale as the "twin" of deploying 0.5 x 0.8 collapsed 0/20 (`deploy-scaling-not-training-equivalent`); one shared teleop speed sent an out-of-band lateral command and the robot clipped its own foot (`teleop-command-band-per-axis`); the latency DR range had not even covered the measured pipeline (`latency-dr-covers-measured-pipeline`). A rate limiter added at deployment only clipped a policy that kept commanding (`deploy-rate-limiter-windup`); moved into training and anchored on the last command it became an integrator in the balance loop (`slew-anchor-is-an-integrator`); anchored on the measured angle it bounded torque and kept the bandwidth (`beta-anchored-action-target`). The walking lines' safe setting, power-scale 0.8, cut the ends of the recovery policy's full-range travel and left its spikes alone; a gain inside the trained band did the job (`power-derating-cuts-full-range-contract`).
Coach application. Demand the measured pipeline latency/limits in the plant model and in gate conditions; treat every deploy-side derating as a question ("what is this compensating?"); block per-axis command sources that exceed training bands.
doctrine-13DR budget is finite; its distribution is the measured supportRobustness is a conserved budget: disturbance training on an already-hardened lineage borrows from existing margins; DR ranges span the measured deployment support - no fictitious tails (they buy degenerate gaits), no single constants (they allow thin-margin specialization); harden the plant only after the task distribution is final.
Case. The same push dose helped a narrow lineage and damaged a balanced one - budget conservation (`push-dr-conditional-budget-conservation`); wide latency tails bought drag-glide, constant values shipped 60% thinner tilt margins - the answer is a narrow band on the measured support (`dr-tail-plant-continuation`, `constant-value-dr-overfits-margin`); task-first ordering because hardening a soon-to-change task wastes budget (`task-shaping-before-plant-hardening`); COM randomization used deliberately as a behavior-shaping tool, and rolled back on symptom per its own contract (`com-randomization-forces-leg-spread`, `com-dr-rollback-on-symptom`). DR that is switched on can still be thin: the run policy fell in the frontal plane its gain-and-latency randomization never touched (`thin-dr-judged-by-channel-coverage`), and a friction priority settled under one action contract had to be re-measured under the next (`friction-priority-re-measured-after-plant-change`).
Coach application. Before any DR rung: check the untrained policy against the spec, the lineage's current DR load, and the measured real-world range; after it: audit retained margins, not just the new tolerance.
doctrine-14Gates measure what hardware feels: posture, margins, stripped assistsAcceptance batteries carry posture-class rows (tilt max median, per-joint L/R asymmetry, temperature) beside task rows, graded margin columns beside binary gates, chirality scored per side, at least one condition that removes the environment's free stabilization, and validated predictive scalars promoted into the gate.
Case. Three same-shaped judging errors - survival, displacement, wz-difference - all missed what the operator felt; posture metrics had the predictive power (`task-metrics-vs-posture-metrics`, `stand-gate-posture-not-survival`); binary survival saturated and hid a 60% margin gap (`constant-value-dr-overfits-margin`); v5 passed everything on the ground and failed suspended (`suspension-probe-removes-free-stabilizer`); the hip_roll (l+r) scalar predicted real drift direction and ordering and entered the battery (`hip-roll-sum-predicts-lateral-drift`); averages hide chirality (`chirality-scored-separately`); gait-quality gates are judged at speeds that demand a gait (`low-speed-commands-reward-dragging`). The recovery line added the rest of the kit: where failed episodes end, not only where they started (`end-state-confusion-matrix`); a frozen acceptance distribution with a pinned seed (`frozen-acceptance-distribution-and-pinned-seed`); video of the metric rollout itself (`video-as-acceptance-record`); and the admission that a 10 s episode cannot see a stance that fails after a minute (`episode-length-bounds-what-a-gate-sees`). The one-leg line removed a foot-spacing wall that no gate measured, and the feet met on hardware (`removed-wall-returns-on-hardware`).
Coach application. Review every battery for posture rows, margin columns, per-side scoring, and an assist-stripped condition; when operator feel and gates disagree, suspect the metric class first.
doctrine-15Fork and root selection: recoverability, maturity, frozen rewardsChoose fork roots by which candidate's deficits the coming training can pay back (precision is recoverable; lost plasticity, symmetry, and margins are not); prefer mature checkpoints as roots even when younger ones score better as products; never fine-tune through a reward change - continuation is legal only with the reward frozen and plant/DR widening one rung at a time.
Case. s1e-500 beat higher-precision candidates because its exclusive strengths were unrecoverable (`fork-root-recoverable-shortfall`); the b300 arm proved maturity is capital against adaptation shock (`root-maturity-vs-product-quality`); the B-arm scatter/half-recover/collapse signature falsified reward-change fine-tuning and drew the legal boundary for S2 continuation (`fine-tune-reward-change-falsified`).
Coach application. For root debates, build the exclusive-strengths table and ask "which side can be trained back?"; require dual-arm evidence for maturity claims; classify any proposed continuation as reward-frozen or not before approving.
doctrine-16Curricula: verified engagement, lineage counters, disease-phase gatingAutomatic curricula must prove they engage (a saturated ratchet is constant DR wearing a curriculum's name); every ramp counts lineage-cumulative progress, not per-process steps; penalties aimed at late-stage pathologies ramp in after exploration noise decays; difficulty rises on measured per-stratum success, never on schedule.
Case. The s1f ratchet capped at iter 248 and never engaged (`auto-curriculum-engagement-check`); the saturation ramp re-fired at +600 after every resume and no shipped product ever saw the penalty (`curriculum-counter-lineage-steps`); the same penalty worked once gated to the disease phase and became an untouchable mechanism (`gate-penalties-to-the-disease-phase`); record-high aggregate reward hid a fully-failing delay stratum (`aggregate-metrics-mask-subgroup-failure`); bucket share is not a gradient lever (`bucket-share-is-not-a-gradient-lever`). An assist curriculum keyed to a pooled success share was withdrawn on the strength of the categories that already worked (`curriculum-criterion-conditioned-on-lagging-category`); a pace set by per-step income moved only when that income was time-gated (`per-step-income-drives-speed-time-gate`), and the same gate had to be retired in a lineage without the disease (`time-gate-vs-wide-stance-retire-the-fix`).
Coach application. Ask every curriculum three questions: does it engage (show the internal state)? what does it count (process or lineage)? when is it present (against the pathology's phase)? Check where shipped checkpoints sit relative to every ramp.
doctrine-17Probe before training: feasibility first, hypotheses in tablesAfter two failed training attempts at a skill, stop training: demonstrate the behavior open-loop, enumerate hypotheses in a written table audited against actual configs cheapest-first, race one probe per side of the sim2real boundary for hardware-only pathologies, and use suspended tests to acquit or convict actuators before blaming authority.
Case. "在黑暗里试钥匙" - four sidewalk rungs failed until an open-loop probe separated exploration/waveform/authority in one experiment (`open-loop-probe-before-reward-tuning`); the foot-drag mystery fell to a seven-hypothesis config audit (`hypothesis-table-code-audit`); the period-doubling was resolved by racing a reward-side and a plant-side evidence line - and both paid off, one per sub-case (`period-doubling-evidence-race`); the suspended test acquitted the roll actuator in one measurement (`suspended-test-isolates-actuator-authority`). A read-only configuration probe told a wall from a slope in the recovery line's seated basin (`configuration-probe-wall-not-slope`), and the fix it pointed to - where the feet are - took prone from 0/159 to 158/159 (`prone-dead-end-is-foot-placement`); a knob that did not move its variable was recorded as no test of the idea (`dof-vel-penalty-is-not-a-pacing-knob`).
Coach application. When a skill resists training, prescribe the probe before any further reward edits; require verified target trajectories before imitation terms; keep a falsified-fixes list so closed roads stay closed (`amplitude-cut-falsified-yaw-fix`).
doctrine-18External advice is recomputed locally; values transfer as ratiosEvery external suggestion is classified adopt / already-have / modify / trap by recomputing its claim on the local reward table and probe data; numeric values transfer only as dimensionless ratios (to tracking weight, leg length, sqrt(gL), control rate); citations are verified to exist.
Case. "Start vy very small" would have destroyed sidewalk learning on this reward table - the gradient scales quadratically (`external-advice-audit-against-own-arithmetic`); swing-height targets and weights transferred correctly only through leg-length and tracking-ratio scaling (`transfer-ratios-not-absolutes`); the "6-step delay" was refused for lacking a control rate (`latency-dr-covers-measured-pipeline`); a borrowed reference's structure was FK-verified and its amplitude re-derived from the division of labor (`reference-structure-fk-amplitude-division`); retrieval agents fabricated verbatim arXiv quotes - only source-verifiable material was used; and one dismissed suggestion later proved right for a different mechanism, and was credited (`cycle-average-tracking-for-gait-quantities`). An advisor's staged state machine turned out to exist in none of the three papers it cited, and reading them changed the plan (`advisor-paraphrase-vs-paper`).
Coach application. Intercept every "paper X does Y" with the local recomputation; convert absolutes to ratios before comparison; verify quotes; revisit dismissed advice when new mechanisms appear.
doctrine-19Hardware sessions are scripted experiments, not tuning sessionsReal-robot time executes a pre-registered matrix: risk-ordered (baseline first, fragile last with a spotter), stage-gated (suspended smoke before ground), A/B sessions bracketed by a repeated reference run, operators briefed on measured zero-command and untrained-axis behavior, chirality-aware disturbance protocols, no field tuning - the only legal field changes are scripted, single-variable, and self-reversing.
Case. The S2 acceptance sheet (`risk-ordered-real-deployment`, `battery-bracketed-real-ab`, `know-zero-command-behavior`, `push-test-chirality-protocol`, `no-field-tuning-protocol`); the RAM-only torque experiment with automatic power-cycle rollback (`reversible-single-variable-field-experiments`); and the sim-veto rule - even sim's condemnations get one safeguarded hardware check when they judge the purpose-built configuration (`sim-veto-needs-real-confirmation`). The recovery line's first real run went ahead with its preconditions unmet and was stopped as dangerous (`first-real-get-up-violent-stage-one-policy`); after it: a staged hang, mat and floor protocol (`staged-hang-mat-floor-for-get-up`), a fixed power-cycle pre-flight and two-machine discipline (`power-cycle-preflight`, `two-machine-config-discipline`), a fall guard replaced rather than switched off (`fall-guard-becomes-a-state`), and logs that are part of the run (`hardware-log-is-the-attribution-input`).
Coach application. Turn every hardware request into a runbook with order, gates, brackets, briefing, and anomaly plays; refuse improvised parameter changes on the floor.
doctrine-20Close questions in writing; restart when the debt is structuralAudited questions get frozen verdicts with citable wording and an explicit reopening bar; hardware verdicts are dated by deployment-stack and calibration state and expire when those change; and when successive rungs shuffle symptoms without net progress, freeze the lineage as regression baselines, pay the structural debts, and retrain minimal - carrying laws and instruments, not weights.
Case. The chirality and COM questions were closed with frozen wording and "no reopening without new hard evidence" (`frozen-verdicts-semantic-boundaries`); v5/v6's condemnations expired with the deploy stack (`stale-verdicts-under-old-stack`); a 2-degree calibration fix moved the whole runnable envelope (`zero-offset-calibration-shifts-envelope`); plant upgrades are era boundaries with paired re-baselining (`plant-swap-invariants-vs-shifts`); and the 2026-08-05 reset froze v5-v11, fixed the latency FIFO / manifest / sampling / reward-table debts, and restarted - producing the lineage that reached hardware SOTA (`freeze-lineage-fix-structure-restart`, `minimal-reward-table-with-provenance`). The recovery line's real-robot verdicts ended up in three places that disagree, one of them an undated note in a command file (`write-hardware-verdicts-back`).
Coach application. Maintain the closed-questions ledger and quote it when symptoms recur; stamp verdicts with stack/calibration versions; when a team is three rungs into symptom-shuffling, raise the restart question explicitly with the freeze-fix-restart pattern.
doctrine-21Name the quantity in the space it lives inA goal, reward term or acceptance criterion about the feet, the base or the contact state is computed from the quantity itself - world poses, forces, per-category outcomes - never through a joint-angle, single-signal or pooled stand-in that assumes everything else sits at nominal; and every detector is validated on a behaviour known not to contain the event before it becomes a gate.
Case. The recovery line was caught three times: |ankle roll| as "flat feet" sold stance width and the real robot slid into the splits, a hip-roll criterion was confounded by 50 deg of yaw, and the joint table said 0.271 m where the feet were 0.159 m apart; task-space terms produced the first flat, wide stance (`joint-space-proxy-for-task-space-quantity`). Flight detection lied in both directions across two lines - foot height flagged 40% false flight on a walking gait, contact force alone flagged slip chatter as hops (`contact-detector-single-signal-lies`). A pooled height average described a robot that did not exist - six in ten standing, four in ten sitting (`zero-partial-credit-is-not-an-iteration-problem`) - and the walking line had learned the same lesson on yaw rate (`heading-integral-not-body-rate`).
Coach application. For every reward term and gate row, ask what physical quantity it stands for and whether it is measured directly; flag joint-space or single-signal stand-ins for task-space goals, ask for a detector validated on a negative control, and split pooled metrics by category before reading them.
doctrine-22Continuation needs a live gradient; a release is chosen by a scanContinue a converged policy only on a change that creates a live gradient, on a short budget, with every checkpoint scanned on the transfer axis; choose a release by running the full battery over a band of checkpoints and stop on signals, never by taking the last one; and when edits to the terminal phase cannot move a behaviour, roll back and retrain with the constraint present from the start, keeping the order in which the lineage acquired its mechanisms as explicit curriculum phases.
Case. A continuation with no new gradient drifted MuJoCo transfer from 100/98% to 80/28% while every Isaac gate stayed perfect, and a live-gradient continuation at the same depth kept it (`converged-continuation-is-poison`). One-leg checkpoints 100 iterations apart failed 1 and 38 of 40 cells, and late ones degraded (`checkpoint-choice-is-a-full-gate-scan`). Four in-lineage stance fixes failed because the stance was the end of the get-up path, and from scratch it grew right (`stance-decided-by-get-up-path`); fixes stacked on degraded states were rolled back by the user (`stop-stacking-roll-back-and-audit`); and the lineage's final recipe, trained from scratch in one run, sat at 0% because the order of its curriculum was part of the product (`curriculum-history-is-part-of-the-product`). The omni line's short adaptation budgets and mature roots are the same law seen from the other side (`continuation-budget-not-from-zero`, `root-maturity-vs-product-quality`).
Coach application. Before approving a continuation, ask for the new gradient, the budget and the transfer axis in the scan; before approving a release, ask for the scan; after three rungs without progress on the target, propose rolling back to the last good checkpoint and a from-scratch phase plan instead of a fourth patch.
Experience cards
165 cards matching “bucket-share-is-not-a-gradient-lever”.
Raising a command bucket's share does not strengthen its per-state gradient - it only starves the other modes
bucket-share-is-not-a-gradient-leverWhen a skill is not learning, first prove its per-state signal is nonzero (ignore-floor and probe checks); only rebalance sampling shares to fix genuine sample starvation, and account the regression risk to the diluted modes before doing it.
Symptom
Sidewalk was not learning, and the reflex proposal was to give the side bucket a larger share of sampled commands.
Context
The C4-redo3 rung explicitly kept the 20/40/20/20 bucket (stand/forward/turn/side) with the reasoning written out: PPO computes advantages per state, so bucket proportion does not change the per-state gradient of side states; at 4096 envs x 20% x 24 steps the rollout already contained ~19.7k sidewalk states - sample count was not the bottleneck. And the cost side was already measured: cutting forward from 60% to 40% had made vx+0.30 die at +400 in an earlier run - more cuts would only collapse it sooner.
Change
Bucket proportions held constant across the entire C4 redo series; the actual bottlenecks (metric frame bug, reward variance penalty, exploration form) were pursued instead.
Outcome
Sidewalk was eventually fixed with zero bucket changes (feed-forward delivery, +100 iters); forward/turn skills never suffered starvation-induced regressions during the redo series.
Mechanism
Policy-gradient credit is assigned per visited state; oversampling a mode multiplies its states in the batch but not the informativeness of each, so if the per-state gradient is ~0 (behavior unreachable or reward indifferent), N times zero is still zero - while the displaced modes genuinely lose data and regress.
Applies when
- proposing to oversample a failing task/command mode
- a majority mode regresses after share rebalancing
- budgeting env count vs mode share for a multi-skill policy
“比例不动：PPO 逐状态算优势，桶占比不改变单状态梯度；4096 env × 20% × 24 = 每 rollout 已有 1.97 万个侧走状态，样本数不是瓶颈；而 forward 60%→40% 已实测让 f30 在 +400 处死掉，再加码只会更早塌。”
train/C_LADDER_RUN.md § 3i. 桶 20/40/20/20 不动（比例不动） The median of a bimodal metric lands in the empty gap - check the distribution, and never judge swing on 3 seeds
median-hides-bimodal-distributionBefore quoting a median or mean, look at the distribution; report suspected-bimodal metrics as mode share plus per-mode ranges, use small-seed smoke runs only to screen trends, and size the seed count for decisions by the share resolution you need (here: 20).
Symptom
Years of "high swing variance" and undecidable 3-seed swing readings turned out to be one fact: the metric was bimodal all along - "历代 swing 高方差与 3-seed 不可判由此定性:一直在测双稳态系统" - and every median reported from it (e.g. 12.1 mm) described a value no seed ever produced.
Context
Concrete instances: s2e_pd-1400's 20 seeds split 2.6-4.9 mm vs 19.3-24.0 mm with zero seeds between; s1e-500 read 3.9 mm on seeds 0-2 but 23.1 mm median over 20 seeds; a 3-seed reading of 19.3 was logged as "double-peak optimism, lesson recurrence #4". The selection re-audit codified the sampling rule: "3-seed 的 swing 读数不可判点, 只能筛带,选点必须 20-seed" - 3 seeds may screen a band, only 20 seeds may pick a point.
Change
Swing (and any suspected multi-modal metric) reported as mode shares plus per-mode ranges instead of a bare median; 3-seed smoke numbers demoted to band-screening; all shipping/selection decisions moved to 20-seed batteries.
Outcome
The "swing debt" bookkeeping was reinterpreted as basin probability (see swing-bistability-damping-switch), and checkpoint selection stopped being whipsawed by which basin the first three seeds happened to fall into.
Mechanism
Central-tendency statistics presuppose unimodality; on a bimodal distribution the median tracks the mode SHARE, not any achievable behavior, and small samples alias the share entirely. Mode-aware reporting (share + per-mode stats) is the only faithful summary, and the needed sample size is set by the share resolution required.
Applies when
- a quality metric shows chronic high variance across seeds
- 3-seed smoke readings contradict 20-seed batteries
- reporting swing height, clearance, or any basin-prone metric
“中位数落在空档里,「swing 债 −11mm」实为「50% 概率掉进拖地吸引子」。历代 swing 高方差与 3-seed 不可判由此定性:一直在测双稳态系统。… swing 跨 seed 双峰 (500 在 seed0~2 只读 3.9mm, 20-seed 中位 23.1) —— 3-seed 的 swing 读数不可判点, 只能筛带, 选点必须 20-seed。”
train/README.md § swing 双稳态定性 / s1e 选点重审 A binary reward band on the swing knee had zero gradient everywhere below it, so the one-leg policy parked in an unloaded "fake touchdown" that Isaac's 5 N threshold scored as success and MuJoCo showed as real pressing - a capped constant-gradient ramp, retrained from scratch, passed 40/40
binary-band-reward-fake-touchdownShape approach-to-target rewards as capped ramps with gradient from the starting posture, never as bands or indicators; and compare contact-based terms across simulators, because a policy riding just under a force threshold looks perfect in one and wrong in the other.
Symptom
At iteration 1,000 of the first one-leg run the swing foot never lifted: the policy stood with the "raised" foot resting lightly on the ground. In Isaac the contact-match term paid 96% of full marks; the same policy in MuJoCo pressed that foot on the ground for 450 frames.
Context
The swing-leg goal was "shank folded fully back" (knee 1.5-1.95 rad), rewarded as a binary band: +0.8 inside [1.5, 1.95], zero elsewhere. From knee 0.05 to 1.5 rad the term was flat. Contact is judged at a 5 N force threshold, so a foot carrying less than 5 N counts as lifted. The walk line had hit the same disease with a binary indicator (v4) and fixed it with a capped ramp (knee_swing_amplitude).
Change
swing_knee_fold changed from the binary band to a ramp clamp(|q|/1.5, 0, 1) - a constant gradient capped near 86 deg - and the policy was retrained from scratch (V0r1). After the first real-robot try showed the fold still too low, its weight went 0.8 -> 2.0 (V0.1).
Outcome
V0r1 model_2300 passed the full acceptance 40/40 (swing knee 1.72 rad, about 98.5 deg) and was stamped as oneleg_v0.onnx; the cross-simulator disagreement is recorded as the thing that caught the cheat.
Mechanism
A reward that is flat until the target is reached gives no gradient to approach it, so the policy settles for the nearest state other terms reward - here, a foot that satisfies the contact threshold without lifting; a second simulator with different contact force resolution exposes such threshold-riding.
Applies when
- rewarding a posture target with an in-band / out-of-band indicator
- a contact threshold decides whether a foot counts as lifted
- trainer-side contact terms are near full marks while the video looks wrong
“初版二值带 [1.5,1.95] 在膝 0.05→1.5 全程零梯度，策略停在"卸力虚点地"（Isaac 5N 阈下 contact_match 96% 满分 / MuJoCo 同策略 450 帧实压——跨仿真器互证抓作弊）；v4 二值指示同型病，按 knee_swing_amplitude 判例改常数梯度封顶 ramp，从零重训 … **oneleg_v0.onnx = V0r1 model_2300, 40/40 PASS**”
git:Lucen V2@origin/oneleg-line:train/ONELEG_V0_SPEC.md § §4 奖励表 swing_knee_fold 行 / §8 核查单 5 A ratio metric flipped the verdict - spectral share rose while absolute high-frequency energy fell 16%
ratio-metrics-need-absolute-checkNever compare share/percentage/centroid metrics across conditions whose totals differ; pair every ratio with its absolute numerator before issuing a verdict, and log retracted judgments so they are not re-derived.
Symptom
walk_v6 was provisionally judged "more jittery" than v5 because the joint-velocity spectral centroid rose 2.91 -> 3.62 Hz and the >4 Hz energy share rose 12.6% -> 17.8%.
Context
Absolute measures said the opposite: first differences of actions fell 1.54 -> 1.31, second differences 2.55 -> 2.19, and absolute high-frequency energy fell 16% (0.490 -> 0.413). The shares and centroid rose only because low-frequency content fell even more - the denominator shrank. The interim judgment was retracted in writing so it would not be reused.
Change
Metric discipline noted: "占比类指标在总量变化时不能直接比较" - share/ratio metrics are not comparable across conditions when the total changes; verdicts about smoothness must cite absolute energies or difference norms.
Outcome
v6 correctly classified as smoother, not jitterier; the retracted judgment logged under "被推翻的一个中间判断(记下来免得复用)".
Mechanism
A ratio confounds numerator and denominator; any intervention that removes low-frequency content raises every high-frequency share without adding a single joule of jitter. Only absolute quantities support cross-condition comparison when totals move.
Applies when
- comparing smoothness/jitter/spectral metrics across versions
- any percentage-based metric moves after an intervention
- writing an eval report that includes normalized quantities
“我一度说"v6 动作更抖" … 错了: 动作一阶差 1.54→1.31、二阶差 2.55→2.19 都在降 … 谱质心升高只是因为低频成分掉得更多, 绝对高频能量实际下降 16%(0.490→0.413)。占比类指标在总量变化时不能直接比较。”
train/WALK_DIAGNOSIS.md § 过程中被推翻的一个中间判断(记下来免得复用) A quadratic clearance reward stalled for 3500 iters near target - switch to an indicator on accumulated height
indicator-reward-avoids-gradient-decayWhen a shaped term plateaus near its target, check the gradient profile: replace vanishing-gradient forms with threshold/indicator forms for the final approach, and prefer delta-accumulation over absolute positions to immunize against frame offsets.
Symptom
The quadratic-error clearance term froze at -0.002 from iteration 2000 to 5500 - thousands of iterations with no progress on foot lift.
Context
Diagnosis: a quadratic penalty's gradient vanishes as the error approaches target, so exactly where the last millimeters must be earned the incentive fades to nothing. The replacement (Humanoid-Gym form): accumulate the swing-phase height climb per foot, reward a BINARY indicator |accumulated - target| < 0.01 masked to the planned swing window, reset on contact, weight +1.6 as a positive reward. Two properties: the indicator's incentive is constant until the threshold is crossed (no decay zone), and accumulating height DELTAS makes any constant sole-frame offset cancel automatically - which structurally sidesteps the earlier 0.0585 m zero-point bug ("顺带绕开我先前那个'忘了减 0.0585 导致惩罚恒为 0'的坑").
Change
Clearance reformulated from quadratic penalty on instantaneous height to indicator on per-swing accumulated climb (target 0.03 m by leg-length scaling, weight +1.6).
Outcome
Part of the v5 package under which lift finally moved (v5 29 mm, v6 34 mm vs the stalled 18-24 mm era); the offset-cancellation property removed one whole bug class from the term.
Mechanism
Policy-gradient learning follows the reward's local slope; quadratic shaping concentrates slope far from target and starves it near target, so convergence stalls precisely at the finish line. An indicator pays a constant bounty until the goal is met; formulating on deltas rather than absolutes removes sensitivity to reference- frame constants.
Applies when
- a reward term's value freezes short of target for thousands of iters
- designing clearance/height/precision terms
- reward code depends on absolute link positions
“现行二次型在接近 target 时梯度趋零 —— 这正是 clearance 从 iter 2000 到 5500 卡在 −0.002 不动的原因。… 二值指示在跨过阈值前梯度恒定,没有衰减区 … 累积 delta 让 SOLE_OFFSET 自动抵消”
train/WALK_V5_SPEC.md § 3. clearance 改峰值型(去掉二次型的梯度衰减) A pull-assist curriculum keyed to a global success share was satisfied by the categories that already worked and withdrew before prone learned anything - conditioning the criterion on prone took it from 2.5% to 98.7%
curriculum-criterion-conditioned-on-lagging-categoryMeasure a curriculum's advancement criterion on the population the scaffold is meant to help; a global success share is met by whatever already works, and the help is withdrawn before the lagging case learns.
Symptom
Under the beta-anchored action, supine and side stood reliably while prone still sat (1.3%). A pull-assist curriculum added to help it was withdrawn completely within ~790 iterations and prone moved only to 2.5% (noise).
Context
The pull assist follows HoST: an upward force on the base, active only when the torso is within 30 deg of vertical, scaled by body weight (HoST's 200 N on G1 = 0.583 BW -> 56 N here, steps of 5.6 N, ten levels to zero); the product must pass with no assist. It had already taught sit-to-stand in V1. In V2.1 its advancement criterion was the standing-time share over all envs (threshold raised to 0.55 because the share was already ~0.53).
Change
V2.2: PullAssistForce with gate_category = "prone" - only envs whose first step classifies them as prone count toward the criterion - and the threshold back at 0.35. A feasibility signal was pre-registered: if prone's share stayed near zero under the full 56 N, return to the roll-over path instead of adding force.
Outcome
The prone-conditioned curriculum withdrew level by level only as prone itself passed: prone 98.7%, and the four-category gate passed for the first time on the line (98.6% overall, re-falls 0%, torque gate PASS).
Mechanism
A pooled success share is filled by the categories that already succeed (supine/side ~53%), so the scaffold is removed on their account before the lagging category has used it.
Applies when
- an assist, guide force or easier setting is withdrawn by a success threshold
- one task category lags while the pooled metric looks healthy
- a curriculum ran to completion without changing the lagging category
“**教训:全局站立占比阈会被存量类别(supine/side ~53%)凑够,拉力在 prone 学会前就撤光了 —— metric 设计失误,不是拉力机制失效**(它在 V1 教会过 坐→站)。 … **V2.2(已启动)**:`PullAssistForce` 加 `gate_category="prone"` —— 达标判据 只统计 prone 类 env”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §34 V2.1 判决(2026-08-10) Continuing a converged policy on a change that carried no new gradient drifted its transfer from 100/98% to 80/28% over 3,000 iterations while every Isaac gate stayed perfect - scan every checkpoint on the second simulator's friction axis
converged-continuation-is-poisonBefore continuing a converged policy, check that the change creates a live gradient; if it does not, cap the budget at a few hundred iterations, and in every continuation scan each checkpoint on the second simulator's transfer axis (for example low friction) - trainer-side gates can stay perfect while transfer decays.
Symptom
V2.7-A (swap the flat_feet term for a compensated version, continue from v2_6c) finished with the line's best Isaac score (100%) and a MuJoCo transfer collapse: mu 1.0 98 -> 80%, mu 0.4 98 -> 28%; the stance it was meant to widen had not moved.
Context
The new term's calibration run showed a near-zero tax from the start: the policy already satisfied it, so the reward landscape offered nothing new. A checkpoint scan on MuJoCo mu {1.0, 0.4} located the damage: +100 iterations 100/98% (better than the baseline), then 86/54, 60/38, 80/28 - monotonic decay with training length, while entropy and action noise rose (7.77 -> 8.18, 0.588 -> 0.612): drift, not sharpening.
Change
Rule written in: with no new gradient, a continuation budget is short (at most a few hundred iterations) and the MuJoCo transfer axis enters every checkpoint scan. The next rung (V2.7b, a live stance-width gradient) was budgeted at 1,000 iterations with mu {1.0, 0.4} scans every 100 and a stop-on-signal rule.
Outcome
V2.7b kept transfer at the same depth (mu 1.0 98% / mu 0.4 92% at +1,000, where A had already rotted to 86/54) and at +3,000 (100/96%): a live gradient preserved transfer. V2.8 then broke that pattern (mu 0.4 2%): the gradient must also be compatible with the policy's existing form.
Mechanism
On a converged reward landscape PPO keeps updating without a signal to follow, and the random walk is pulled toward whatever the training plant rewards idiosyncratically - invisible in the trainer's own gates.
Conflicts
The drift mechanism is the spec's reading of one decay series plus one contrasting run; V2.8 is recorded as an exception to "live gradient keeps transfer".
Applies when
- fine-tuning a converged policy with a small reward change
- a continuation run's trainer-side metrics improve while real or cross-sim results worsen
- choosing which checkpoint of a continuation to ship
“**checkpoint 扫定死因**(μ1.0/μ0.4):**29500(+100 iter)= 100/98%** (优于基线!)→ 30400 = 86/54 → 31400 = 60/38 → 32398 = 80/28 —— **迁移随续训长度单调衰减**。 … **教训入库:收敛均衡上的长续训是毒药 —— 无新梯度时 续训预算须短(≲数百 iter),且 MuJoCo 迁移轴必须进 checkpoint 扫描。**”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §43 结果:V2.7-A 判 FAIL —— 换刀本身无罪,毒在续训预算 Foot dragging is an attractor, not a low amplitude - and joint damping is the mode switch, adjustable at deploy time
swing-bistability-damping-switchWhen a quality metric is bimodal, stop treating it as an amplitude to be trained up: map the modes against initial conditions and plant parameters, find the parameter that switches basins, apply it first as a deployment lever, and only then bake it into the training distribution (as a plant-family shift, never as an execution-mapping change).
Symptom
s2e_pd-1400's swing height "median 12.1 mm" hid a perfect bimodal distribution: 20 seeds split into a drag mode (2.6-4.9 mm) and a step mode (19.3-24.0 mm) with NOT ONE seed in between - the median sat in the empty gap, and "swing debt -11 mm" really meant "50% probability of falling into the drag attractor".
Context
Two designed experiments closed the mechanism. Test A (nominal plant, 40 seeds): step 42% / drag 58% / middle 0 - at nominal gains, initial conditions alone pick the mode, both modes 100% survivable. Test B (fixed init, kp x kd grid): kd is the mode SWITCH - at kd 1.3 all surviving cells step (13-22 mm), at kd 0.7 nearly all drag (2.7-4.3), only at kd 1.0 does init get a vote; kp >= 1.2 is dangerous (5/6 falls). Global verification at kd x1.3 (20-seed, delay 2): survival 20/20 at ZERO cost, step share 42 -> 80%, swing median 12.1 -> 18.4 mm, slip record low 334, thicker tilt margin - costs: vx 85 -> 78%, saturation +5 pp. A Pareto sweep then priced the knob: step share 42/72/75/88/82/90 across kd 1.00-1.30 with a linear vx tax of -2.3 pp per 0.1 kd - the basin gain is fully collected at kd 1.20 ("1.30 是 over-damping 纯多付税"). Mechanism: low damping leaves a landing micro-oscillation / ground-slide channel the policy can exploit to drag; damping plugs the channel.
Change
Deployment lever adopted: kd-scale 1.20 (conservative 1.15) as the legitimate successor to the power-0.8 crutch ("前者削幅度保稳,后者堵 拖地通道换步态,且不牺牲存活"); training-side prescription: move the DR band to nominal-1.2 x (0.9,1.1) = [1.08,1.32], deleting the [0.7,1.0) drag-teaching zone - a contract-level change requiring digest re-baselining, gated on measuring the real robot's actual kd dispersion first.
Outcome
The kd surgery rung (s2e_kd) delivered basin 8 -> 11/20, slip 405 -> 331, vx 81 -> 85% with no out-of-band fragility (below-band check 20/20) - "拐杖烧进分布的正确姿势", explicitly contrasted with the failed s1g amplitude version: this one changes the plant family the policy has seen, that one changed the execution mapping the policy would have to relearn.
Mechanism
The gait's swing behavior is a bistable dynamical system whose basin boundaries are set by plant parameters; a policy trained across a kd band that includes the drag basin has learned to inhabit it. Shifting the deployed (and then trained) damping moves the system into the step basin without touching the policy - a plant-side fix for what looked like a training deficiency.
Applies when
- a gait quality metric splits into distinct modes across seeds
- deciding between more training and a gain/damping change
- converting a deployment crutch into a training-distribution change
“20-seed 里拖地模式 2.6~4.9mm 与迈步模式 19.3~24.0mm 各半,中间一个不落 … kd 是模式开关——kd1.3 下 6/6 存活格全迈步 … kd0.7 下几乎全拖地 … swing 债的解(至少大半)在部署端阻尼档,不在训练端 … 机理:低阻尼下落脚微振荡/贴地滑给了策略顺势拖行的通道,加阻尼堵之。”
train/README.md § swing 双稳态定性 + kd 部署杠杆 (2026-08-07, 用户设计 Test A/B) The +/-50 mm lateral COM randomization meant to spread the legs coincided with legs pulling IN - rolled back per its own pre-registered contract
com-dr-rollback-on-symptomWhen adopting a DR value that covers no local measurement, write its intent and rollback trigger into the config at adoption time; roll it back as the control arm the moment the symptom contradicts the intent, and promote the symptom's metric into the acceptance battery.
Symptom
After v7 adopted the reference developer's oversized lateral COM randomization (+/-50 mm) explicitly to force leg spread, the real robot's legs narrowed instead - lateral mean 154 mm / closest 107 mm in sim (nominal 214.5), narrower still on hardware with occasional leg contact.
Context
The rollback was clean because the adoption had been honest: the robot.yaml comment recorded the intent AND that the +/-50 value covered no local measurement (only a 16/7 mm measured offset existed; even the prior widening to +/-20 was subjective), plus the reference's own reported side effect (base sway) and the note "这一项要单独跑、 单独归因". When the opposite symptom appeared, v8 returned y to +/-20 mm as the control arm ("要么没起作用、要么帮了倒忙 … 按约定退回做 对照"), kept x/z untouched (a noise-level difference not worth another variable), and named the second suspect: the landing penalty itself, via the reference's own three-link chain (landing penalty -> stance narrows -> spacing penalty needed). A gate lesson was booked in the same table: v7's sim numbers had ALREADY crossed the line (154/107 vs v5's 182/147) - "这个指标本可拦下 v7" - so foot-distance became a standing acceptance row (min >120 mm, zero leg-leg contacts).
Change
base_com_offset_m y: 0.050 -> 0.020 (x/z kept), regenerated through the export tool rather than hand-editing derived files; foot-distance acceptance row added.
Outcome
A borrowed DR lever with no local measurement basis was retired the moment its symptom contradicted its purpose, at single-variable cost; the metric that would have caught it pre-hardware entered the gate.
Mechanism
DR ranges shape behavior through the policy's robustness strategy, which is jointly determined with every reward term; a lever that forces stance width on one robot can be dominated by a stronger narrowing pressure (landing softness) on another. Levers adopted without local measurement must carry their own rollback trigger, because there is no nominal to argue from when they misbehave.
Conflicts
Causality is not fully closed in the source: the narrowing may come from the landing penalty rather than the COM lever ("腿距的第二嫌疑人是 ④ 本身"); the rollback is the pre-agreed control experiment, not a verdict that the lever caused the narrowing.
Applies when
- importing DR ranges or behavioral-forcing randomizations from references
- a DR lever's observed effect contradicts its documented purpose
- a sim metric existed that would have caught a shipped regression
“⑥ 的本意 … 是逼策略把脚分开;真机结果是脚向内收且偶发相碰——要么没起作用、要么帮了倒忙。… 注释当时就写了"这一项要单独跑、单独归因"。现在症状出现了,按约定退回做对照。”
train/WALK_V8_SPEC.md § 3. 改动 C — 质心随机化退回(撤销 v7-⑥ 的 y 项) Never referee a suspect metric with another metric from the same code - they can share the disease
independent-referee-for-metric-disputesTo adjudicate a disputed measurement, compute the quantity by an independent method from raw state; never accept a sibling column from the same pipeline as the tiebreaker.
Symptom
A triple reversal on one question: sidewalk sign diagnosis (correct) was retracted using a second metric from the same script, then the retraction itself had to be retracted when that second metric turned out to be the buggy one - two opposite-direction errors on the same problem in one day, both written into the execution sheet.
Context
The probe's net-displacement metric suggested the sidewalk reference sign was inverted. Worried about yaw-drift pollution of net displacement, the author checked the same table's body-frame vy_mean column (~0.003 everywhere, 20-50x smaller) and retracted the sign diagnosis. But vy_mean came from mj_objectVelocity, which was silently reporting vertical velocity due to a frame bug - the "referee" was the diseased measurement. Re-measured with a truly independent computation (xmat.T @ qvel, world trajectory), the original diagnosis was confirmed: saw -0.5 gave vy +0.058/-0.130 (76%/106%), consistent with the net-displacement values all along (yaw pollution was real but only 10-21 deg, nowhere near reversal-sized).
Change
Lesson written twice, verbatim, as a hard rule: when questioning a measurement, the referee must be an independent algorithm (different code path, different physical derivation), e.g. rotate qvel by the body matrix directly, or inspect the raw world trajectory.
Outcome
With the independent referee in place the frame bug was confirmed, fixed, and the whole C4 line re-scored - revealing sidewalk had been working (see body-frame-velocity-api-audit).
Mechanism
Metrics sharing a code path (or an upstream API) share failure modes; agreement between them is evidence about the code, not the world. Only a measurement with an independent derivation can break the tie, because its errors are uncorrelated with the suspect's.
Applies when
- two metrics of the same quantity disagree
- about to retract a conclusion based on a second readout
- auditing evaluation code after a surprising result
“我用一个坏指标去质疑一个好指标，并把撤回写进了执行单。教训（写死）：质疑一个测量时，不能用同一份代码里的另一个测量当裁判 —— 它们可能同源同病。裁判必须是独立算法（这次的裁判应该一开始就是 xmat.T · qvel[:3]，或直接看世界轨迹）。”
train/C_LADDER_RUN.md § 3m. 二 我今天犯了两个方向相反的错 / 3n. 五 元教训 Exponential tracking kernels go flat exactly when the error is largest - pair them with an L2 term for the far field
exp-kernel-needs-l2-far-fieldNever let an exp/Gaussian kernel be the only tracking pressure on a quantity that can drift far from target: pair it with an unbounded (L2) term sized as the "don't diverge" floor, and check which frame the kernel reads.
Symptom
With only an exp-type yaw tracking term (exp(-err/std^2), std 0.25), a robot whose heading had drifted badly received almost no corrective gradient: at error 0.6 rad/s the term evaluates to exp(-0.36/0.0625) = 0.003 - near zero AND flat.
Context
The exp kernel is excellent for fine tracking near zero error but its gradient vanishes at large error - precisely when correction matters most. Fix: add track_ang_vel_z_err_l2 (-0.5), a plain quadratic on the same quantity: "exp 管精细跟踪、L2 管'别发散', 互补". Both terms deliberately read WORLD-frame wz (matching the exp term's source), because this torso sways enough that body-frame wz means are systematically off (measured -0.039 while actually turning +0.152). The same far-field-gradient argument reappears in the v8 risk list: frozen joints could not climb back because their huge error put them on the exp plateau ("远端梯度消失是冻结自锁的帮凶").
Change
Added the L2 companion term at -0.5 alongside the existing exp term (a term that had been in an earlier draft and was lost in a rewrite - itself worth noticing).
Outcome
Corrective pressure restored across the whole error range; the exp+L2 pairing became the house pattern for tracking terms.
Mechanism
d/de[exp(-e^2/s^2)] -> 0 as e grows: the kernel saturates and cannot distinguish bad from terrible. A quadratic's gradient grows with error, covering the far field; summing the two yields monotone corrective pressure with fine shaping near the target.
Applies when
- tracking rewards use exp/Gaussian kernels alone
- a drifted or frozen state fails to recover during training
- designing tracking terms for quantities with large transient errors
“exp 在误差大时梯度趋零, 恰好在最需要纠正的时候失灵。… 误差 0.6 → exp(-0.36/0.0625) = 0.003, 接近零且平坦。… exp 管精细跟踪、L2 管"别发散", 互补。”
train/WALK_V7_SPEC.md § ② track_ang_vel_z_err_l2 −0.5 —— 补 exp 的梯度洞 The advisor's "runtime five-stage state machine + per-stage reference poses + RL residual" appeared in none of the three papers it cited - reading the originals changed the plan and downgraded two widely repeated industry claims
advisor-paraphrase-vs-paperRead the primary source behind any piece of advice before adopting its architecture; record where the paraphrase and the original differ, downgrade claims the originals do not support to speculation, and adopt what the verified sources actually share.
Symptom
After the violent first real run, an advisor proposed re-architecting recovery as a runtime staged state machine with reference poses and an RL residual, citing HoST, HumanUP and StableMimic.
Context
The three papers were read in full on 2026-08-09 and tabulated (deployment form, what the "stages" really are, hard constraints, references). HoST: one end-to-end policy, height-gated rewards in training, action anchored as q + beta*a with a beta curriculum. HumanUP: two training stages with the same observation/action; the vendor's three-stage state machine is the baseline it beats (41.7% vs 78.3%); Stage II tracks an 8x slowed Stage I trajectory (4x too violent, 10x does not converge). StableMimic: a learned soft gate. On 08-10 more sources were checked the same way: the Agility page does not say Digit's self-righting was learned in simulation (only step recovery is stated as RL), so the claim was downgraded to speculation; HoST's support for the 12-DoF armless Mini Pi exists in its code repository, not in the paper text.
Change
Adopted only what the originals share: a hard action bound or anchored action space, strong smoothing including a second-difference term, a slowed hidden reference, heavy DR and real fallen states. The staged runtime state machine was not adopted.
Outcome
The next re-rooting candidates came straight from the verified material, and the beta-anchored action space (HoST, with the Mini Pi configuration as the nearest real-robot precedent) became V2, the lineage that later stood up on hardware.
Mechanism
A paraphrase compresses a paper into the advisor's own architecture; only the original shows what was actually deployed, what was a baseline, and which numbers came with which ablation.
Applies when
- an advisor, agent or summary proposes an architecture with citations
- an industry claim ("X learned it in sim") is about to justify a design
- several papers are cited for one combined recipe
“⇒ **顾问的核心形态"runtime 五阶段状态机 + 每阶段参考姿态 + RL residual"在三篇引文 里均不存在**,其中 HumanUP 还点名 state machine 是局限。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §26 三篇引文精读判决(2026-08-09 全文核对;顾问转述与原文有出入) A stronger action_rate penalty cut the median torque demand under the gate and left the p99 at 4x the limit - only a hinge on the pre-clip (computed) torque, weighted by comparison with a peer term, collapsed the tail
tail-torque-needs-hinge-on-computed-demandJudge actuator demand against the deployed limit, read the pre-clip demand (applied torque is censored and gives no gradient on the excess), use an L2 rate penalty for the median and a thresholded hinge on computed demand for the tail, and set a new term's weight from its measured steady magnitude next to a peer term rather than from a back-of-envelope estimate.
Symptom
After R0.5 hip_pitch delivered torque sat at its 12 N*m limit in a typical get-up (demand 119-125% of the limit, p99 4.2x) - zero control margin at exactly the moment modelling error matters.
Context
The 12/17/11 N*m limits are deployment limits written into robot.yaml by set_torque (RS06 at 33% of rated), and simulation uses the same effort_limit - so the gate is judged against them, not the 36 N*m rating (an early reading against the rating was retracted). Applied torque is clipped at the limit - censored data - so demand must be read from computed_torque. With the full-range action contract (hip_pitch scale 1.309, kp 30) a single-step action change of 0.306 already saturates hip_pitch, and action_rate penalizes exactly that change.
Change
R3.0: action_rate_l2 -0.01 -> -0.03 (child-run). R3.1: new torque_headroom = sum relu(|tau_computed|/limit - 0.9)^2, normalized so three motor types share a scale. Its weight was first estimated at -0.1, measured in a 12-iteration run at an effective -0.019 (12x smaller - the estimate had mixed a per-episode-peak p99 with a per-step p99, and at 1% of upright it would have been numerically absent), and set to -0.5 so its steady value (-0.095) matched action_rate's (-0.097).
Outcome
R3.0: sum |da|^2 -64%, success 99.6 -> 100%, delivered median = demand median (the clamp no longer fired in a typical episode), gate PASS at worst 79.9% - but p99 unchanged (hip_pitch 419-432% -> 427-436%). R3.1: p99 hip_pitch -> 148-189% (-57 to -65%), knee 422-439% -> 233-234%, saturation duty -60%, success 100%; the worst joint became hip_roll at 67.7%. Its cost appears in torque-penalty-bought-by-leg-bracing.
Mechanism
A squared-rate penalty presses the whole-episode sum and moves the typical step, not rare spikes; the spikes came from the kp term (large targets while a limb is blocked by the ground - velocity alone could not reach them under vel_limit), and a penalty on applied torque cannot see demand above the clip because every excess sample reads as exactly the limit.
Applies when
- torque demand saturates actuator limits in high-effort skills
- a smoothness penalty improves medians but not peaks
- a new reward term's weight is set by estimate alone
“**必须用 `computed_torque` 而不是 `applied_torque`**:后者被 `effort_limit` 削平, 是删失数据,超限样本全被压成"恰好等于限",对超限部分梯度恒为 0。 … 改按同侪定标取 **−0.5**(稳态 ≈ −0.095,与 `action_rate_l2` 的 −0.097 等量)。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §24 R3.1(torque_headroom 力矩需求越限罚) With no term on foot attitude the robot stood on the edges of its feet (ankle roll -26 deg) from R0.5 to V2.5b; pricing it fixed that and turned stance width into the next free variable - the user saw both on video before any metric flagged them
unpriced-foot-attitude-is-a-free-variableList every posture quantity the hardware cares about (foot attitude, stance width, yaw, knee flexion) and make sure each is priced by a term with real gradient at the observed error; pricing one exposes the next, so re-inspect the feet-level video after every change.
Symptom
Watching the v2_5 video the user said the ankle roll after standing looked very strange - the feet were not flat. The feet view showed the right foot standing on its outer edge; median ankle roll at t = 8 s was -/+26 deg (limit +/-35), mirrored. This was the physical form of the ankle_roll saturation criterion that had failed since R0.5.
Context
No term priced foot attitude: feet_contact_upright counts an edge contact as contact, and stand_pose's wide exp kernel (sigma^2 = 9) gives almost no gradient at 0.45 rad. HoST carries an "ankle parallel" term (+20); this table never had one. Edge standing was made a blocking precondition for hardware (continuous ankle load, unstable contact, wear).
Change
V2.6 (single variable): flat_feet = (|q_l_ankle_roll| + |q_r_ankle_roll|) x upright gate x height gate, a linear hinge with a 5 deg margin, weight -2, continued from V2.5b.
Outcome
Ankle roll -/+26 -> 5.3/5.2 deg, ankle_roll saturation 6.6% (< 10%), feet flat on the feet-view video; success 99.6%, re-falls 0-1%. Then the user watched v2_6: hip yaw constantly tense and the legs very close together. The numbers: hip roll -/+4.9/4.8 deg against a nominal 25 - feet flat and hips open 25 deg cannot coexist without ankle compensation, the new term taxed that compensation, and nothing priced stance width. "Foot attitude as a free variable" was fixed and "stance width became the new free variable" - which the real robot then exposed as splits.
Mechanism
An optimizer spends every posture degree of freedom no term prices; closing one reallocates the slack to the next unpriced one.
Applies when
- a standing or landing posture looks wrong on video while gates pass
- a saturation criterion keeps failing on one joint
- a new posture term was just added
“用户看 v2_5 视频:"起身之后 ankle_roll 非常奇怪,脚根本不是平着站立"。 … 机理:奖励表**无任何脚掌姿态项** —— feet_contact_upright 边缘接触也算触地, stand_pose 的 exp 核(σ²=9)对 26°=0.45 rad 梯度≈0。脚掌姿态是自由变量。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §41 预注册 V2.6:flat_feet —— ⑥ 老账的物理形态被用户目视锁定 Anchoring the action on the measured joint angle (target = q + beta*a), with a beta curriculum down to tau_limit/kp, bounded torque by construction, removed the re-falls and later stood the robot up on hardware
beta-anchored-action-targetFor large-motion skills on position-controlled actuators, bound the action relative to the measured joint angle with a per-joint authority of tau_limit/kp, curriculum the authority down from full range, keep the curriculum state out of the observation and pin acceptance at the deployed authority - and make the deployment code refuse to run the anchored contract without a measured q.
Symptom
The V0 full-range absolute action produced violent targets; the V1 command-anchored rate limit made standing oscillate. Both failure modes came from how the action becomes a target.
Context
V2.0 (user approved, from scratch): BetaAnchorJointPositionAction, target = q_measured + beta_j(m)*a, memoryless per step. beta_j(m) = floor + m*(beta0 - floor), beta0 = the contract half-range (m = 1 reproduces V0 authority), floor = min(tau_limit/kp, beta0): hip_pitch 1.309 -> 0.40, knee 1.047 -> 0.40, hip_yaw -> 0.917, the other joints unchanged - the tightening lands exactly on the joints the V0 torque account convicted. m drops 0.1 per step when a standing-share EMA exceeds 0.35. beta is NOT in the observation, so the 45-dim contract is untouched; acceptance is pinned at m = 0 because the Python curriculum state is not saved in the checkpoint. The deployment chain got a new profile (recovery_v2: action_anchor current_q, explicit per-joint beta written into the contract, independent of the gain profile), and policy_io raises if q is missing rather than silently falling back to the absolute contract; the old profile's check reproduced its pre-change deviation bit for bit.
Change
New action term and beta curriculum; later the RS06 floor was lowered 0.40 -> 0.30 -> 0.25 (kp*beta 7.5 N*m) and the stamped deployment profile was synced to 0.25.
Outcome
First acceptance at m = 0 (v2_0b): re-falls 0% in every category, the torque gate passed for the first time on the line (worst 69.9%), knee jitter 0.004; supine 98.8 / side 88.8% with prone and mid still failing (fixed by the conditional pull curriculum). MuJoCo showed demand at or under the limits (hip_pitch 11.7/12 against V0's 26.8). Lowering beta cut impact (hip_pitch demand 9.7 -> 8.5 N*m) but barely slowed the get-up - it had become coordination-limited. Enabling the policy moves the target only +/-beta around the current pose, so there is no homing fling; the 08-11 real get-up and the later v3_1p1c both run on this contract.
Mechanism
kp*beta caps the proportional torque in a single step with no build-up delay and no memory, giving both a hard impact bound and full balance bandwidth.
Applies when
- a skill needs full joint range but hardware torque limits are low
- absolute position targets cause impacts or saturation
- changing the action semantics of a contract that deployed policies share
“**动作项** `BetaAnchorJointPositionAction`:`target = q_实测 + β_j(m)·a`, 逐步无记忆 … **Play/验收钉 m=0(= floor = 部署档)**:python 课程状态不进 checkpoint, Play cfg 显式 `beta_m_start=0` … 判读:**结构赌注兑现** —— 站姿零再摔 + 力矩账首过(kp·β 封顶按构造)”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §33 V2.0 预注册(2026-08-10,用户点头开工):β 锚定动作空间,从零训 Multiple changes may share one rung only if their symptom spaces are orthogonal - with the ablation order written in advance
orthogonal-batch-with-ablation-orderBatch changes into one rung only when you can name each change's private symptom space in writing; pre-register the ablation order (numeric before structural) and per-change escalation plans, so a mixed outcome decomposes without new decisions.
Symptom
v8 needed four repairs at once (saturation cheating, landing impact, leg narrowing, heading alignment) - strict one-variable laddering would have cost four training cycles for wounds that were all already diagnosed.
Context
The batch was allowed because each change owns a disjoint symptom space, stated explicitly: "A→形态/饱和, B→落地/步态高度, C→腿距/roll 摇摆, D→偏航/转向" - so a single run can attribute each outcome to its change by which symptom moved. For the failure case, the ablation order was pre-registered (A2 -> A1 -> B -> D -> C, "先撤数 值改动" - retract numeric tweaks before structural ones), and every change carried its own escalation/rollback plan (e.g. A insufficient: joint_pos_ref 1.6->2.0 or widen the exp kernel; B overdone - robot afraid to land: v_ok 0.30->0.45; D unstable: rel 0.5->0.25, not back to 0).
Change
Four-change rung executed as one run with per-change symptom ownership, per-change contingency plans, and a pre-registered global ablation order for unattributable regressions.
Outcome
The rung retained single-run attributability without paying 4x training cost; the contingency table meant no failure mode would require improvising an ablation under pressure.
Mechanism
The one-variable rule exists to keep attribution possible, not as an end in itself; attribution survives batching exactly when the changes' observable effects are separable. Orthogonality is a claim that must be argued per pair in advance - and the pre-registered ablation order is the escape hatch for the case the claim fails.
Applies when
- several diagnosed fixes are queued and ladder time is scarce
- deciding between strict laddering and a combined rung
- a combined rung shows a regression no single change explains
“四个改动症状空间基本正交,可单 run 归因:A→形态/饱和,B→落地/步态高度,C→腿距/roll 摇摆,D→偏航/转向。出现无法归因的整体退化时消融顺序 A2→A1→B→D→C(先撤数值改动)。”
train/WALK_V8_SPEC.md § 8. 风险与归因 The smoke watcher panicked at the wrong operating point and its score goes blind when gates saturate - treat it as a survival sentinel, not a judge
smoke-watcher-operating-pointConfigure every automated evaluator at the lineage's declared deployment operating point, give it graded metrics that cannot saturate, and until then scope its authority to catastrophe-detection - never let a mis-configured watcher stop or rank a rung on its own.
Symptom
Two watcher misfires in one ladder: (1) during the friction rung the watcher (evaluating at kd 1.0) reported panic-level 1/3 survival from iter 3300 - falsified by the official kd 1.2 scan, because the lineage's design operating point was kd 1.2 and the watcher lacked the --kd-scale passthrough; (2) during the PD rung the watcher's early-stop score froze at iter 1050 despite ongoing drift improvements, because with all eight gates passing (constant 0/3 failures) the score has no gradient left - "八门全过恒 0/3 时 score 对漂移改善盲, s1f 课文三现".
Context
Both are the same category: the in-training smoke loop is an instrument with its own configuration (operating point, score design), and its verdicts are only as aligned as that configuration. The booked doctrine: "冒烟只当存活哨兵" - until the watcher evaluates at the deployment operating point with graded metrics, its role is detecting catastrophes, not ranking checkpoints; ranking belongs to the full battery at the design operating point (and the watcher's scoring was separately patched to weight survival 3x so recoveries during hard phases are not early-stopped away).
Change
Watcher debt booked (--kd-scale passthrough); score saturation acknowledged with graded columns planned; selection authority kept with 20-seed batteries at the declared operating point.
Outcome
A false panic did not abort a rung that was actually passing at its design point; a frozen score did not hide real drift gains; the instrument's authority was scoped to what its configuration can actually see.
Mechanism
An evaluator is itself configured (gain profile, delay, metrics); evaluating a policy away from its design operating point measures a counterfactual robot, and bounded scores saturate once binary gates pass, losing all sensitivity. Instruments need the same operating-point discipline as deployments and graded outputs to retain gradient.
Applies when
- an automated smoke loop contradicts the official battery
- early-stop scores freeze while graded metrics still improve
- lineages with non-default deployment gain/delay profiles
“watcher (kd1.0 口径) 3300 起 1/3 恐慌被 kd1.2 正式扫描证伪为考纲外假象 —— 工作点评测口径教训: watch_ckpt 缺 --kd-scale 透传 (待补), 冒烟只当存活哨兵。… watcher score 饱和误停 @1050(八门全过恒 0/3 时 score 对漂移改善盲, s1f 课文三现)”
train/README.md § omni_s2e_fric (watcher 恐慌被证伪) / omni_s2e_pd (500 臂) Training the final recipe from scratch in one run - every mechanism the lineage had accumulated - produced 0% and a seated robot; the order in which the lineage acquired those mechanisms was part of why it worked
curriculum-history-is-part-of-the-productA recipe that ends a lineage is not a recipe for a from-scratch run: consolidate it as ordered curriculum phases matching how the lineage acquired its mechanisms, check that every curriculum criterion is reachable from the starting policy, and read the run's raw term values, not the total reward, before calling it green.
Symptom
V3.0 trained the lineage's whole final recipe from scratch in one 9,000 iteration run - full beta curriculum, prone-conditioned pull assist, friction DR, the 3 s zero gate on standing income, flat_feet - testing the proposition "the product is defined by its configuration, not by its training history". Training looked all green (reward 26.33, episode length 500, 100% time-outs).
Context
Read in raw units against v2_6c at the same weights, the green was a seated equilibrium: base_height 0.377 vs 0.640, stand_pose 0.205 vs 0.516, flat_feet 0.0000 (zero because it sits outside its height gate, not because the feet were flat). Acceptance: 0.0% in Isaac at the deployed authority, 0.0% on every MuJoCo friction level, and still 0.0% at the training-time authority (100% seated at 0.222 m, upright and still).
Change
The full stdout (316k lines) was read: the beta curriculum's criterion (standing share over 0.35) was met zero times, so beta never left the wide setting and the policy had no experience at the deployed authority; the pull curriculum was stuck on the same criterion. The lineage had escaped the seated basin with immediate income (V2.0-V2.2) and only then added the zero gate to cure rushing (V2.5); from scratch, the zero gate removed the early "stand fast, earn more" gradient needed to escape. Verdict "the curriculum history is part of the product", limited to n = 1. v2_6c stayed the product.
Outcome
V3.1 kept the order as explicit phases: P1 from scratch with immediate income (zero gate off) until the curricula advance, P2 adding the zero gate. P1b/P1c escaped the seated basin and passed; P2 was later judged net negative and dropped (time-gate-vs-wide-stance-retire-the-fix).
Mechanism
Mechanisms that refine a competent policy (time gates, tight authority) can delete the gradient a naive policy needs, and a curriculum whose advancement criterion the naive policy never meets freezes at its first level.
Conflicts
The spec limits the falsification to "this recipe + this curriculum criterion" (n = 1, no seed sweep, no criterion tuning). V3.1's phased run succeeding is consistent with the ordering reading but changed other terms too.
Applies when
- consolidating a long lineage of continuation fixes into one clean recipe
- a from-scratch run with all mechanisms enabled plateaus early
- curriculum state is not logged or never advances
“命题:产物由配置定义,而非训练史定义。 … 训练 log(完整 stdout 316k 行)`[beta_anchor]` 仅初始 1 行,**达标 0 次** … V2.0~V2.2 靠**即时计酬**爬出坐姿盆地(§33),站立巩固后 V2.5 才装归零门 治"过快"(§39)。**课程史是产品的一部分。**”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §42 V3.0 判决(2026-08-11):从零单 run 全机制 FAIL 于坐姿盆地 Prone get-up sat at 0/159 until two gated hinge terms moved the seated feet - first sideways (561 -> 360 mm), then fore-aft (-168 -> +56 mm) - and success went to 158/159 with nothing else changed
prone-dead-end-is-foot-placementWhen a stuck state and a successful state differ geometrically, penalize the discriminating quantity with a gated hinge that is exactly zero in the state the policy actually reaches (measure it - not the nominal), then re-probe: flattening one axis can move the discriminant to another.
Symptom
Prone falls always righted and then sat with the feet splayed wide or tucked behind the hips, from where the policy never stood (0% for four generations).
Context
Four lines of evidence pointed at foot position: the configuration probe (ankles 215 mm apart stood 52.3%, 561 mm apart 0.0%); FK showing the action contract's nominal (a = 0) is itself a 465 mm straddle, so the action_rate and still terms were pulling toward the splits; biomechanics (feet tucked under the body cut peak hip-extension torque 148.8 -> 32.7 N*m, -78%); and HoST's foot-displacement term, which this reward table lacked. The earlier "not a reward hole" reading was corrected to "a gradient hole, not a level hole": at the dead point the heaviest term (upright) was saturated with zero gradient, still paid for not moving, and the one live gradient (base_height) pointed at the thigh-horizontal torque barrier. A prone ROM scan had already ruled out pushing up from prone.
Change
R0.4: feet_spread_excess = clamp(ankle distance - 0.215, 0, inf) x upright gate, weight -2.0, plus a height-decay factor added after measuring that the policy's real standing stance was 406 mm, not the 215 mm nominal (the plain version would have taxed every successful stand 0.38/s). R0.5: the same shape on the fore-aft axis, feet_fore_seated = |fore-aft offset - 0.05| x upright gate x height decay, target +50 mm (the measured natural offset of standing postures). One variable per rung.
Outcome
R0.4: seated ankle distance 561 -> 360 mm, supine/side exactly unchanged, prone 0 -> 1.9%, mid 45.9 -> 62.2%; a probe then showed the discriminant had moved to the fore-aft axis (standing starts +42 to +51 mm, the prone seat -168 mm). R0.5: supine 99.4, prone 99.4, side 100, mid 100%, re-falls 0%; both geometry terms collapsed to ~0 near iteration 13,100 as base_height rose, and the prone fore-aft offset went -168 -> +56 mm - the term's own target, closing the causal chain. The cost, unmeasured at the time: action jitter rose 33% (sum |da|^2 6.82 -> 9.06).
Mechanism
An upright-gated hinge is inert while the robot rolls and exactly zero in the achieved stance, so it adds gradient only inside the stuck basin; a seated robot with its feet behind or outside its COM must make a kinematically unfavourable transition to stand, and moving the feet under the body removes it.
Applies when
- a get-up or transition skill fails from one start category only
- successful and failed episodes differ in a measurable geometric quantity
- a shaping term might tax the posture successful episodes already use
“`recovery_r0_5`,唯一变量 = 追加 `feet_fore_seated`(与 R0.4 同形状,只换测量轴)。 … 对照 R0.4 的 prone(3.1%,360 mm,**−168 mm**):前后偏移从 −168 走到 +56, 正是这一项的目标量,**判别量被消掉后成功率随之到顶** —— 因果链完整。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §20 R0.5(前后向脚位置项):成功率门全过 —— prone 0/159 → 158/159 Before training a one-leg stand the spec named the cheapest cheats - hopping on the support foot, a raised foot resting unloaded, a leg tripod - and gave each a countermeasure and a gate; one still appeared and was caught by exactly those gates
enumerate-cheapest-cheats-before-trainingBefore training, list the cheapest behaviours that would satisfy each reward term without doing the task, give each a countermeasure in the reward and a gate in acceptance, and prove the intended behaviour is reachable with a probe - then treat any gate the policy games as evidence about the reward, not the gate.
Symptom
The literature's single-leg benchmark reports eight state-of-the-art general policies holding a clean one-leg stand 0 times out of 90 - they survive by sneaking steps and hops - so the task's first adversary was the policy's own cheating.
Context
The spec's shape self-check ("what is the zero-cost option?") listed, for the one-foot bucket: the cheapest cheat, a foot resting on the ground without load, countered by a 5 N contact threshold plus positive swing income; the second cheapest, small hops on the support foot to reset balance, countered by a continuous support-air penalty plus a gate of zero support-foot flight segments. The probe that preceded training had already seen a third: early low-lift postures "survived" by pressing the swing foot at 78-95 N, a leg tripod, removed by folding the shank back. The two-foot bucket was checked too: its zero-cost behaviour is ordinary standing, with no odd base state.
Change
Countermeasures and gates written before training: swing-contact and support-air penalties, gate 2 (zero swing-foot contact frames above 5 N), gate 3 (zero support-foot flight segments).
Outcome
The first run still found the unloaded-foot cheat (a binary reward band gave it no gradient to lift) - and it was caught, by the contact gates and the cross-simulator comparison, not discovered on hardware. The retrained V0 passed all gates 40/40, including zero support-foot flight after the flight detector was corrected.
Mechanism
A policy optimizes the reward, not the intent; the cheapest behaviours that satisfy the reward are predictable from the reward's structure, and a gate written for each before training turns a silent cheat into a failed row.
Applies when
- designing rewards for balance, contact or "hold still" tasks
- benchmark policies are known to cheat the task
- writing acceptance gates for a new skill
“文献里 8 个 SOTA 通用策略在单脚站基准上 0/90 干净保持， 全靠偷步偷跳活命，这是本任务的第一反作弊对象 … 单脚桶下最便宜的作弊是"脚虚放地上不受力"——接触判定 >5 N 力阈（沿用），配 swing_height_band 正收入拉开。 … 第二便宜是"支撑脚小跳重置"——support_air_penalty 连续罚 + 验收门支撑脚腾空段=0 双保险。”
git:Lucen V2@origin/oneleg-line:train/ONELEG_V0_SPEC.md § §0 目标口径 / §5 形状自检(零成本选项是什么) An edge-triggered landing penalty missed the tail and fired after the harm - penalize overspeed continuously inside the contact window
penalize-tail-before-touchdownPenalties aimed at impact/violation events must (a) price the excess over a threshold, not the mean, and (b) be active on the approach (state-gated window), not triggered by the event - check your control rate can even see the event you are penalizing.
Symptom
The v7 landing penalty (vz^2 on the contact-force rising edge, weight -10) did not bite: landing-velocity 95th percentile stayed at 2.61 m/s against a 0.3 target.
Context
Two structural faults were identified: (1) it penalized the MEAN over sparse events - many soft landings dilute the occasional violent slam, while the damage (GRF peaks, motor peak load) lives in the tail; (2) it fired AFTER touchdown - at 50 Hz evaluation the rising edge is aliased by physics decimation, so the read vz is often the already-decelerated post-impact value: underestimated, and with no shaping gradient before contact. Replacement: continuous penalty while the sole is inside a height gate (h < 0.03 m): relu(-vz - 0.30) - only the excess over an allowed approach speed is penalized (tail only), and gradient exists for several frames BEFORE touchdown. The sole-height computation again subtracts the 0.0585 m link offset ("WALK_DIAGNOSIS 坑#1, 别再踩"); the edge-triggered version was kept as a diagnostic only.
Change
feet_landing_vel reformulated: edge-event vz^2 -> in-window relu(-vz - v_ok) with v_ok 0.30 (conservative vs the sqrt(L)-scaled human value ~0.19, to be tightened after passing), h_gate 0.03, weight unchanged -10.
Outcome
The failure analysis of the first form was written before the second was trained; the v_ok escalation path (0.30 -> 0.45 if the robot becomes afraid to land) was pre-registered in the risk table.
Mechanism
Sparse-event mean penalties optimize the average case while the constraint is a quantile; and any penalty evaluated only at/after a discrete event gives the optimizer no gradient along the approach trajectory that determines the event. A state-gated continuous excess penalty fixes both: it prices only violations and shapes the approach.
Applies when
- impact/landing penalties fail to move tail percentiles
- a penalty is triggered by contact edges at a coarse control rate
- designing constraint-style penalties for rare violent events
“罚的是均值路径:上升沿是稀疏事件 … 大量软着陆稀释偶发猛砸;而伤害在尾部 … 罚在触地后:50 Hz 评一次,上升沿被物理 decimation 混叠,读到的 vz 常是撞完已减速的值——既低估,又没有触地前的塑形梯度。”
train/WALK_V8_SPEC.md § 2. 改动 B — 落地惩罚改罚尾部、罚在触地前 Compare the achieved reward to the computed ignore-floor to tell "never learned" from "learned but unprofitable"
ignore-floor-diagnosisFor any skill that trains flat, compute the reward the null policy would earn on that term; achieved==floor means the behavior never paid out (find why: exploration, reward observability, or feasibility) - do not tune weights first.
Symptom
C4 sidewalk failed on both arms; the question was whether the policy had found sidewalk and rejected it as unprofitable, or never found it at all - two diagnoses with opposite fixes.
Context
The theoretical value of the sidewalk tracking term for a policy that completely ignores the command was computable from the command distribution: 0.189. Trained final values landed at 0.187 (arm A) and 0.204 (arm B) - sitting exactly on the ignore-floor - while the honest balance at the optimum actually favored sidewalking (net +0.88/step inside the side bucket). Later the same arithmetic closed the whole saga: for the true reward landscape, doing real sidewalk scored 0.153 vs 0.944 for ignoring - the policy's refusal "是理性最优，不是探索失败" (rational optimum, not exploration failure) under one hypothesis, and under the final measurement-corrected account the policy had "每一次都在 做理性选择" (made the rational choice every time).
Change
Diagnostic rule adopted: compute the ignore-floor for the new term; if the achieved value sits on it, the behavior was never expressed in useful volume (or the reward cannot distinguish it - check both); if the achieved value is above floor but the behavior is absent at deployment, the policy sampled it and priced it out - then the reward balance, not exploration, is the lever.
Outcome
Correctly identified that PPO had not merely under-valued sidewalk; each subsequent hypothesis (waveform sign, regularization cage, exploration form, reward kernel) was tested against this floor arithmetic, which kept the search honest through three reversals.
Mechanism
Every reward term has a computable value under the null behavior; the achieved-vs-floor gap is a one-number audit of whether the optimizer ever monetized the target behavior. It converts "training failed" into one of two mechanistically distinct states with different fixes.
Applies when
- a new skill's tracking reward plateaus early
- deciding between exploration fixes and reward-weight fixes
- post-mortem of a failed curriculum rung
“track_lin_vel_y_exp 训练终值恰好坐在「完全无视指令」的底分上（A 0.187 / B 0.204，理论值 0.189），而终点 balance 明明有利（side 桶内净 +0.88/步）。不是学会了不划算，是根本没学到。”
train/C_LADDER_RUN.md § 3e. 为什么首战 FAIL A get-up policy righted itself and sat - three terms paid the seated pose 84% of the return, and the only shaping term that could tell sitting from standing was an exp kernel outputting 5e-5
seated-basin-dead-exp-kernelWhen a policy parks in a degenerate posture, tabulate what each reward term pays that posture against the target (watch contact terms that reward touching rather than bearing load) and evaluate every exp kernel at the error actually observed; a kernel narrower than the real error is switched off, and widening it is a one-variable repair that adds nothing new.
Symptom
R0 converged by iteration 700 and gained 1.7% over the next 2,300; success 0.0% in all four fall categories. Three of four success conditions passed (tilt median 1.0 deg, both feet in contact 99.6%, angular rate low); height passed 0.6% (median 0.204 m against 0.326). The robot knelt in a W-sit: hip yaw +/-47 deg, knees folded to 92% of the hard limit, shins flat, pelvis on the ground, torso vertical.
Context
Minimal reward table: upright (1-g_z)/2 +2.0, base_height linear progress +1.5, stand_pose exp(-||q-q_stand||^2/std^2) x upright gate +1.0 with std 1.0, still +0.5 and feet_on_ground +0.5 both x the upright gate, plus regularizers. The upright gate is a hinge that opens below 30 deg of tilt. The pre-registered fallbacks were then checked against the measured state: tightening the tilt gate was falsified (tilt was already 1.0 deg); a success bonus contradicted the spec's own no-cliff-bounty rule; narrowing the categories was useless (all four converged to the same pose); raising init noise was too weak for a basin this deep. Only a half-rise intermediate state addressed it, and a cheaper repair existed.
Change
R0.1 (user decision, single variable): stand_pose std 1.0 -> 3.0. Not a new term and not a bounty - repairing a declared term that was numerically dead. The two runs' logged env.yaml differ in log_dir and std only.
Outcome
R0.1 58.2% overall (R0 0.0%): supine 91.5%, side 82.2%, mid 55.9%, prone 0/156; knees fully straight; ||q-q_stand||^2 9.99 -> 0.91 and the stand_pose term 4.6e-5 -> 0.90; get-up ~1 s, no re-falls, the curve still rising at the 3,000-iteration cap. Prone stayed at zero and needed a different fix (see prone-dead-end-is-foot-placement).
Mechanism
Sitting earned upright 1.98/2.0, still 0.43/0.5 and feet_on_ground 0.46/0.5 - 3.0 of a 3.57 per-second return - because feet_on_ground asked for contact, not load. The only terms separating sitting from standing were base_height (+0.70/s for standing) and stand_pose, whose kernel at the real 9.99 rad^2 error (75% of it in the two knees) was exp(-9.99) = 4.6e-5 with a gradient near 1e-4. Standing up meant risking 3.0/s to gain 0.70/s while unfolding knees at 92% of their limit under load. With std 3 the same term is exp(-9.99/9) = 0.33 - a live gradient, three quarters of it on the folded knees.
Applies when
- a policy converges early to an upright but low, seated or kneeling pose
- a posture-matching exp term reads ~0 in the training logs
- contact-based rewards saturate while the task metric does not move
“**关键:`feet_on_ground` 只问"触地"不问"承重", 跪坐时双脚确实贴地,照样满分。** 三项 3.0/s = 总回报 3.57/s 的 84%。 … **exp(−9.99) = 4.6e-5** —— 权重 1.0 的项实际输出 5e-5、梯度 ~1e-4, **不是"还没学会",是数值上根本不存在**。 … **R0.1 决定(用户 2026-08-09 定,单变量)**:`stand_pose` 的 `std` **1.0 → 3.0**。 不是加新奖励、不是悬崖悬赏,而是**修复一个已声明但数值失效的项**”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §11 R0 首跑(recovery_r0, 2026-08-09):FAIL —— 翻正了但坐着 Under continuous 3-axis uniform sampling, pure straight-line walking is a zero-measure event the policy never trained
zero-measure-commands-need-mode-samplingEnumerate the exact command points users will actually issue (straight, stop, in-place turn) and give each explicit probability mass via mode sampling with off-axes pinned to zero - never assume a continuous sampler covers its measure-zero subsets.
Symptom
"The robot drifts even in sim when told to walk straight" persisted across reward tunings - because with commands drawn as vx in [0.15,0.5] x vy ~ U(+/-0.2) x wz ~ U(+/-0.6), the event vy=0 AND wz=0 has probability zero: pure straight-line walking was never sampled even once.
Context
Restart evidence item #3: "纯直行是零测度点 … 'sim 里直行就漂'是分布的 必然,不是 reward 没调好" - the drift metric was legitimately drowned by commanded turning (v11's own comment self-documented this). The structural fix is discrete mode sampling: a custom ModeVelocityCommand that first draws a mode by share (stand/forward/back/turn/side/mixed), then draws values only on that mode's axes with all others pinned to exact zero - which is also what preserves single-variable discipline in the C ladder (native 3-axis uniform "采不出'离散模式桶' … 把 C1~C4 的单变量纪律直接毁掉"). The mixed mode later got an ellipsoid constraint rather than a cube for the same reason in reverse - corner combinations of a cube are unrepresentative extremes.
Change
Command generation moved from independent per-axis uniforms to mode-bucket sampling with pinned-zero off-axes (plus 20% rel_standing); acceptance likewise evaluates per mode.
Outcome
Straight-line behavior became a trained, testable mode instead of a measure-zero hope; the C ladder could add one mode per rung with provable isolation.
Mechanism
A policy optimizes expected reward under the command distribution; events of probability zero contribute nothing to the objective, so exact-zero-command behaviors (straight walk, stand, in-place turn) are only learned if the sampler gives them mass. Product-of-uniforms distributions concentrate mass on mixtures and give none to the pure behaviors users actually command.
Applies when
- a "simple" command (straight, stop) underperforms mixtures in sim
- designing command distributions for velocity-tracking tasks
- a ladder needs per-mode isolation for attribution
“纯直行是零测度点:最终 command 为 vx∈[0.15,0.5] × vy∈U(±0.2) × wz∈U(±0.6) 连续均匀,vy=0∧wz=0 从未被专门采样 —— "sim 里直行就漂"是分布的必然,不是 reward 没调好 … Isaac 原生 UniformVelocityCommand 是三轴各自 uniform,采不出"离散模式桶"”
train/OMNI_V0_SPEC.md § 0. 为什么从零 (3) / 三件前置 (1) The restart reward table lists a reason for every term AND a lesson for every exclusion - absent terms are removed, not zero-weighted
minimal-reward-table-with-provenanceMaintain the reward table as an evidence ledger: every term cites the episode that justifies it, every excluded term cites the episode that convicted it (including the development stage it is valid at), and retired terms are deleted from the config, never left at weight zero.
Symptom
Seven walk generations had accumulated an entangled reward table where nobody could say which term earned its place; the restart needed a table that could be audited line by line.
Context
The minimal table v2 was built under three written principles: "一项管 一件事、结构性反抬脚的项一个不留、塑形只留一套相位逻辑;不在表里的一律 不加" (one term per job; zero structurally-anti-lift terms; exactly one phase-shaping logic; nothing outside the table gets added). Every row carries its provenance (e.g. base_height target = standing height cites the v4 crouch lesson; split x/y tracking cites the merged-exp gradient hole; world-frame yaw cites the v1/v3 body-frame lesson). Every EXCLUSION carries its same-type precedent: feet_landing_vel out because it is poison while the gait is unformed (drag pays 0, lifting pays - the v4-clearance / v8a-B "reverse threshold" family) though it was fine in v7 when the gait already existed - term validity depends on developmental stage; feet_air_time out with its measured non-lever evidence (v6 had it at 2.0 and still lifted 4 mm); and replaced terms are REMOVED from the config ("置 None,不是权重 0 挂着") so audits see truth, not dormant weight.
Change
Reward table rebuilt as ~20 rows each with weight + provenance column; exclusion list maintained alongside with the falsifying episode for each; dormant terms deleted rather than zeroed.
Outcome
Later revisions (S1.2/S1.3) modified the table by citing and updating specific rows' evidence rather than re-arguing the whole design; the table doubled as the lineage's reward-lesson index.
Mechanism
A reward table is a set of standing hypotheses; attaching each row's evidence makes revisions targeted and reversible, and recording why a term is absent prevents the cycle of re-adding known poisons. Deleting vs zero-weighting matters because config audits and DR interactions see the term either way - a zero-weight term is dormant complexity waiting to be flipped on wrongly.
Applies when
- designing a reward table for a restart or new task
- someone proposes re-adding a previously removed term
- auditing which reward rows still earn their place
“原则:一项管一件事、结构性反抬脚的项一个不留、塑形只留一套相位逻辑;不在表里的一律不加 … feet_landing_vel(评审 #4):拖地时代价恒 0、抬脚才收费——与 v4-clearance/v8a-B 同属「反抬脚门槛」家族,步态未成形时是毒;v7④ 加它时步态已存在。… 已从 cfg 移除(置 None),不是权重 0 挂着。”
train/OMNI_V0_SPEC.md § 3. 最小奖励表 v2 / 明确不带 A joint frozen at the action clamp pays zero action_rate forever - penalize pre-clip saturation to make the cheat cost money
saturation-cheating-zero-rate-costWhenever actions are clipped and any smoothness/rate penalty exists, add a pre-clip saturation penalty so living at the clamp costs more than oscillating - and audit for frozen-at-clamp joints (action std ~0, |a| at exactly the clip value) as a standing acceptance row.
Symptom
With action_rate_l2 raised to -0.2, walk_v7's hip_pitch actions froze at exactly +/-1.000 (the clamp), reproduced bit-for-bit on hardware (splits frozen at +/-0.35 rad); the gait-shaping term joint_pos_ref collapsed to 0.026-0.035. The repo had died in the same trap once before (walk_v0: four joints pinned at +/-1.0).
Context
Mechanism: a joint pinned at the clamp has action-rate cost exactly zero and forever zero - under a strong smoothness tax, "push to the clamp and freeze" becomes the dominant optimum. Lowering the weight (-0.2 -> -0.1) only reduces temptation; the frozen state still costs nothing, so the structural fix adds action_saturation = sum(relu( |a_raw| - 0.9)) at weight -1.0, computed on the PRE-clip network output - post-clip, |a|=1.01 and |a|=3 punish identically and the out-of-range gradient dies (v0's old disease: mean |a| 1.71 soaked in saturation). Economics: freezing at |a|=1.0 now pays 0.1/joint/step (two hips = 40% of alive) vs ~0.0004/step for the healthy reference oscillation - the cheat flips from free to ~250x negative. Honest limits were recorded: A1 does not forbid freezing at 0.89 (the anti-freeze pressure must come from the oscillation demand of joint_pos_ref), and the alternative "rate on post-clip target" was rejected as 换汤不换药 - a pinned target also has zero rate.
Change
v8-A: add action_saturation (-1.0, thresh 0.9, pre-clip) AND halve action_rate_l2 (-0.2 -> -0.1, still 3.3x the v5 value); success criterion pre-declared (joint_pos_ref telemetry returns to v6 scale).
Outcome
Booked as the structural repair of the v7 freeze; also fixed a config hygiene trap discovered on the way - action_rate was assigned twice in __post_init__ (v5 comment line then v7 line), merged to one assignment "别再留两处赋值给下次审计埋雷".
Mechanism
Clipping creates a zero-gradient, zero-cost absorbing region in action space; any penalty on action derivatives makes that region strictly optimal once entered. Only a penalty on clamp proximity itself (measured pre-clip so depth of violation is visible) restores a slope out of the absorbing region.
Applies when
- joints sit at exactly the action clip with near-zero variance
- raising a smoothness penalty degrades gait amplitude
- shaped-oscillation terms collapse after a rate-weight increase
“钉死在钳位的关节 action_rate 代价精确为零且永远为零;−0.2 之下"推到钳位冻起来"成了压倒性最优 … 本仓第二次栽在同一坑(walk_v0 死于四关节钉死 ±1.0)。回调权重(−0.2→−0.1)只降低诱惑不消除作弊 … 算在 clip 前的原始网络输出上 … 作弊收支从"白赚"变成"倒贴 ~250 倍"。”
train/WALK_V8_SPEC.md § 1. 改动 A — 治饱和作弊 Gate a new reward term by its command so all old modes score pointwise identical
gate-new-reward-terms-by-commandWhen a reward term must be added mid-lineage, gate it on the condition that defines the new task so every pre-existing situation scores exactly as before - and still watch for value-rescale pathologies inside the new mode.
Symptom
Adding a lateral tracking reward (track_lin_vel_y_exp) ungated would have paid 0-2.0 per step even in modes with cmd_vy = 0 (healthy gait sway of vy ~0.1 already earns 1.28), shifting the whole reward table by a large bias and rescaling the value function - no longer "just adding one mode".
Context
C4 was the C ladder's only true reward surgery. Single-variable discipline required that the change be invisible to every existing mode. The chosen construction: gate_by_cmd=True - the term pays only when |cmd_vy| > 0.02, so for all modes with cmd_vy == 0 the term is pointwise zero, i.e. the reward is pointwise identical to before the change. The same trick appeared earlier in C1: replacing the vy L2 tax with a command-error version that is "对 cmd_vy≡0 逐点同值" (pointwise equal when cmd_vy is 0), explicitly classified as not-a-reward-change.
Change
track_lin_vel_y_exp added with gate_by_cmd=True (weight +2.0, std 0.15); the residual acknowledged honestly - inside the side bucket the values DO change, so the rung still watched the known reward-reshuffle pathology signature (s1c B-arm: scatter -> half-recover -> collapse) as a stop criterion.
Outcome
Old modes provably unaffected (pointwise-equal argument); attribution for any change in old-skill metrics stayed clean through the C4 redo series.
Mechanism
PPO's critic normalizes to the reward scale it sees; an ungated additive term shifts returns in every state and re-scales advantages globally, entangling the new skill with all old ones. Command-gating confines the new term's support to the new mode's state distribution, making "pointwise identical elsewhere" a provable property rather than a hope.
Applies when
- adding a tracking/shaping term for a new command or skill to a lineage that must not regress
- reward change proposed while other skills are still being gated
- reviewing whether a config diff counts as a reward change
“只在 |cmd_vy| > 0.02 时付。不门控的话它对 cmd_vy≡0 的老模式也给 0~2.0 分（健康摇摆 vy≈0.1 → 1.28），等于给整张奖励表加一个大偏置、值函数尺度全变 … 门控后老模式逐点得 0 = 与加项前逐点同值，单变量纪律成立。… 但 side 桶内的值确实变了 —— 这仍是奖励表改版，开级盯 s1c B 臂签名”
train/C_LADDER_RUN.md § 3d. gate_by_cmd=True（重要） Cutting swing amplitude 40% raised yaw-momentum demand 53% - the falsified fix is recorded so nobody walks that road again
amplitude-cut-falsified-yaw-fixTest gait fixes against the quantity the ground must actually supply (torque/force rates vs friction ceilings), not against kinematic proxies; record falsified fixes with their mechanism so the search space shrinks permanently.
Symptom
Support-foot yaw slip stayed at ~223 deg (vs 225 deg) after walk_v6 cut joint swing amplitudes by ~40% (hip_pitch 20.6->10.4 deg, knee 31.3->18.8 deg) - the change built on the theory "smaller swing = less yaw momentum to dump into the ground".
Context
Direct measurement inverted the theory: yaw-momentum amplitude ROSE 16% (+/-0.1000 -> +/-0.1159) and its rate of change rose 53% (1.86 -> 2.84 N*m demanded from the ground), pinned exactly at the foot's supply ceiling (2.8-3.3 N*m at mu 0.6-0.7) - so slip could not drop. The extra demand lives in higher harmonics: v6's crisper foot placement (better clearance 34 mm, lower landing force) shortens the momentum- exchange window, concentrating the same exchange into less time. The verdict was written as a closed road: "下一轮不要再走这个方向". An honest residue was also booked: WHY amplitude down but momentum up 16% remained unresolved, with the named next step (per-rigid-body decomposition of H_z, since per-joint RMS sensitivity ignores phase correlations).
Change
The "reduce amplitude to reduce yaw momentum" lever was removed from the planning space; future yaw-slip work redirected toward the supply side (friction) and momentum-rate mechanics.
Outcome
Slip unchanged (225 -> 223 deg); the falsification and its mechanism became a permanent constraint on the fix search space.
Mechanism
Ground yaw torque demand scales with the rate of change of angular momentum, not its amplitude; kinematic amplitude cuts that also sharpen contact timing can raise dH/dt while lowering range. When demand exceeds the friction-limited supply ceiling, slip is set by the ceiling, so demand-side changes below the ceiling do nothing visible.
Applies when
- attacking foot slip or yaw drift via gait shape changes
- a fix targets an amplitude while the constraint is a rate
- documenting a failed intervention after a version comparison
“walk_v6 | ±0.1159 (+16%) | 2.50 Hz | 2.84 N·m (+53%) … 脚的供给上限 2.8~3.3 N·m(μ 0.6~0.7)—— v6 正好顶在天花板上, 所以滑移一点没降。… 结论: "减小摆动幅度以降低偏航动量"这条被 v6 证伪 —— 砍 39% 幅度, 需求反升 53%。下一轮不要再走这个方向。”
train/WALK_DIAGNOSIS.md § ② 未生效的机理: 减小摆动幅度反而让偏航需求上升 Sort external training advice into adopt / already-have / modify / would-trap by recomputing it on your own config
external-advice-audit-against-own-arithmeticNever apply external tuning advice directly: recompute each claim on your own reward table and probe data, classify it adopt / have / modify / trap, and record why - and verify external citations actually exist.
Symptom
External AI/literature advice for the omni ladder arrived plausible-sounding but was written without knowledge of this robot's actual reward table, contract, and history; following it blindly would have broken single-variable discipline and, in one case, made sidewalk unlearnable.
Context
Before the C ladder, every external suggestion was audited: 3 adopted (ellipsoid command sampling; staged wz bands; command-switch acceptance), 3 already present (unified reward; frame history - the frozen 168-dim 5-frame window; per-100-iter acceptance), 2 modified (stand share kept at 20% to avoid a second variable; back share NOT raised because the probe showed backward works untrained 20/20@67%, so oversampling would only crowd out forward), and 1 flagged as a trap: "start vy very small (0.06-0.15)" - on THIS reward table vy was only an L2 tax, so ignoring a vy=0.06 command costs 0.4% of the vx tracking scale, 28-180x cheaper than ignoring forward, with quadratic shrinkage making small commands weaker still. A separate retrieval-reliability note: two search agents returned fabricated verbatim quotes from arXiv PDFs (2 papers, verified fake and discarded); only HTML/abstract/source-verifiable material was used.
Change
Advice classified only after recomputing each claim with local numbers; the "start small" trap was replaced by adding a gated lateral tracking term (the ladder's only true reward surgery) instead of shrinking the command.
Outcome
The adopted items (ellipsoid modes, staged wz, transition acceptance) entered the ladder; the trap was avoided; one external factual error (calling s1g the mainline start - it was falsified 0/20) was caught. Later, one initially-dismissed item (sigma=0.15 too narrow) turned out right for a different reason than claimed - see cycle-average-tracking-for-gait-quantities.
Mechanism
External advice encodes the advisor's reward table and robot, not yours; the transfer-validity test is whether the claim survives recomputation under your own arithmetic (reward margins, probe baselines, contract freeze). Items that survive become experiments; items that don't become documented traps.
Applies when
- incorporating LLM or literature advice into a training plan
- advice conflicts with locally measured baselines
- an external claim depends on reward-table details the advisor cannot know
“其建议 C4「先很小，vy = ±0.06~0.15」—— 在我们这张奖励表下会让侧走学不起来 … 忽略侧走比忽略前进便宜 28~180 倍，且指令越小激励越弱（平方缩放）—— "先很小"在稳定性上对、在梯度上正好把信号缩没了。”
train/C_LADDER_RUN.md § 1. 外部 AI 训练建议的评估（采纳 / 已有 / 要改 / 会踩坑） Removing a foot-spacing wall passed every simulated gate and made the feet collide on the real robot - nothing priced stance width in the two-foot phase, the policy narrowed to the simulator's self-collision floor, and real calibration offsets closed the last millimetres; the wall came back with a gate
removed-wall-returns-on-hardwareWhen a constraint is removed, name what will govern that quantity instead and add a gate for it; never let a simulator's collision floor be the margin, and when a gate is exceeded by a hair, record the exact numbers and hand the release decision to a person instead of quietly passing it.
Symptom
On the first real-robot try of oneleg_v0 (2026-09-16) the two feet collided; the user also judged the folded foot not high enough.
Context
The V0 reward table had dropped the feet_lateral_distance wall because it seemed to conflict with the hip adduction single support needs. In the two-foot command bucket no remaining term governed stance width, so the policy drifted narrower until the simulator's self-collision stopped it; the sim acceptance had no foot-spacing gate, so 40/40 said nothing about it. On the robot, calibration offsets consumed the margin.
Change
V0.1: the wall restored (-10, minimum 0.16 m), re-checked against measured numbers (a swing-phase lateral spacing of ~148 mm costs 0.12 per step, acceptable); fold weight 0.8 -> 2.0; a ninth gate: minimum foot spacing >= 100 mm and zero leg-contact frames. The removal was kept on record.
Outcome
oneleg_v0_1 (V0r2 model_2200) passed 39/40 with the spacing gate 40/40. The single miss (a 15.4 deg tilt transient against a < 15 deg limit during a side switch, steady 6.9 deg, everything else green) was recorded with its numbers and released for the user to overrule.
Mechanism
An unpriced degree of freedom drifts to wherever the simulator stops it; if that stop is the simulator's own collision model, the policy's margin on hardware is whatever the calibration error leaves.
Applies when
- dropping a reward term that looked redundant or conflicting
- hardware shows a failure no simulated gate measures
- a release candidate misses one gate row by a small amount
“V0 撤墙被真机证伪（2026-09-16）：双脚桶没有任何项管站宽，策略贴 sim 自碰撞底线收窄，真机标定偏差一吃**双脚相碰**。 … min ≥ 100 mm 且腿碰 0 帧（eval_straight 同判据）—— … V0 真机双脚相碰暴露 sim 门未看脚距的缺口 … L s2 标称 tilt 瞬态 15.4°（门限 <15, 超 0.4°, 稳态 6.9°, 该跑其余全绿）——换侧瞬态蹭线, 判定放行留档, 用户可否决。”
git:Lucen V2@origin/oneleg-line:train/ONELEG_V0_SPEC.md § §4 feet_lateral_distance 行 / §6 验收门 ⑨ / §8 核查单 7 The shipped checkpoint was chosen by scanning checkpoints on the full gate - neighbours 100 iterations apart failed 1 and 38 cells, late checkpoints degraded - never by taking the last one, and training stopped on signals, not on a schedule
checkpoint-choice-is-a-full-gate-scanChoose a release checkpoint by running the full acceptance battery over a band of checkpoints (including the transfer axis), stop training on measured signals rather than a fixed iteration count, and expect adjacent checkpoints to differ sharply.
Symptom
Gate results moved sharply and non-monotonically between checkpoints of the same run, and the last checkpoint was often not the best.
Context
One-leg V0r1: the 2,000 neighbourhood was best; from 2,500 on the nominal gates degraded (late overtraining); 2,000 itself had one real micro-hop (17.7 mm over 5 frames); 2,300 was all green and shipped. V0r2: failed cells per checkpoint 2,000:19, 2,100:38, 2,200:1, 2,300:3, 2,400:27, 2,500:12, 3,000:18 - 2,200 shipped. The recovery line learned the same from the other side: stopping v2_6 early at a scheduled point left a policy whose re-fall rate had spiked to 9-22% before consolidation healed it ("stop on signals, not on the schedule"), and a continuation's transfer decayed checkpoint by checkpoint while Isaac stayed perfect.
Change
The acceptance rule "scan checkpoints, do not look only at the last one" is written into the one-leg gates (called the S1 discipline); release candidates are chosen from the scan.
Outcome
Both one-leg releases were mid-run checkpoints (2,300 and 2,200) chosen by the full 40-cell battery.
Mechanism
PPO keeps changing the policy after the gates saturate; with no gradient toward the gate's conditions, later checkpoints wander, so gate quality is a noisy function of iteration.
Applies when
- picking which checkpoint of a run to export and stamp
- a run is stopped at a fixed iteration budget
- final-checkpoint results are worse than mid-run smoke tests
“Isaac 侧 S1 纪律: 验收扫 checkpoint，不是只看最后一个。 … 扫描判决: 2000 邻域最优——2500+ 标称面退化（⑤③② 散挂, 晚期过训）, 2000 有一例真微跳（L s100 μ1.2, 17.7mm/5帧）, 2300 全绿。”
git:Lucen V2@origin/oneleg-line:train/ONELEG_V0_SPEC.md § §6 验收门 / §8 核查单 5 与 7 Freeze the deployment contract, stamp every export, and let an automated checker catch wiring bugs
contract-freeze-and-checkerFreeze and fingerprint the policy I/O contract; ship contract changes as new versioned profiles that leave old artifacts bit-identical; and extend the automated contract checker with every pipeline change, forcing the new path to execute in the check.
Symptom
Contract-level changes (observation layout, action pipeline) are where silent sim/real divergence is born; two real wiring bugs appeared the one time the action pipeline was extended.
Context
The 215-dim observation contract was frozen ("纪元 3，三机 digest" - an era number plus a digest agreed across three machines); proposals that would break it (e.g. a GRU memory) were rejected on contract grounds. Every exported ONNX is stamped and verified with a manifest (onnx_manifest --stamp / --verify), and deployment refuses mismatched combinations. When C4 added the lateral feed-forward, it went in as a NEW profile (omni_ff) leaving the existing omni profile's behavior bit-identical; the checker (check_contract) was extended to force the feed-forward path to actually execute (cmd_vy=0.13) and promptly caught two genuine bugs: (1) re-clamping with soft_joint_pos_limits after the feed-forward (0.23 rad deviation) instead of reusing the parent's clip; (2) indexing processed actions by asset.joint_names instead of the action term's own contract-ordered _joint_names, which landed the feed-forward on the wrong joints (l_hip_yaw / r_ankle_pitch).
Change
Contract discipline as implemented: frozen dims + digest; manifest stamping and refusal; contract changes only via new versioned profiles; checker updated in the same commit as any pipeline change, with inputs chosen so new code paths are exercised.
Outcome
Both wiring bugs caught before any training or deployment ("两个都是 check_contract 当场抓出来的 —— 这次它值回票价"); old deployments provably unaffected by the new profile.
Mechanism
The contract is the only interface the policy and robot share; freezing plus fingerprinting makes divergence detectable, and an executable checker turns "the contract holds" from a belief into a test - but only if its inputs actually drive the new code path.
Applies when
- modifying the action or observation pipeline of a deployed policy
- exporting policies for hardware
- proposals that would change observation dims or history structure
“契约校验抓到的两个真错误（记账，别再犯）：1. 前馈后误用 soft_joint_pos_limits（URDF 限位 ×0.9）重钳 → 0.23 rad 偏差 … 2. 用 asset.joint_names 索引 _processed_actions → 前馈落到 l_hip_yaw/r_ankle_pitch 上 … 两个都是 check_contract 当场抓出来的 —— 这次它值回票价。”
train/C_LADDER_RUN.md § 3j. 契约级改动 / 契约校验抓到的两个真错误 Prove a new penalty actually fires - two ways a clearance term silently did nothing
inert-reward-term-auditBefore training with a new reward term, log its realized per-step value under the current policy and confirm it is nonzero where intended - check coordinate zero-points against FK and check who occupies the term's gate; and never weaken the term that creates the states your new term needs.
Symptom
A newly designed swing-height clearance penalty could have trained as a no-op twice over, and the companion advice to lower feet_air_time actively backfired when tried.
Context
Instance 1 (zero-point offset): the proposed code used body_pos_w of the foot link, but that is the ankle_roll_link frame origin, which sits 0.0585 m above the ground even with the foot flat on it - so (0.03 - 0.0585) is always negative and the penalty is永远 0; the 0.0585 offset must be subtracted (verified identical in MuJoCo FK and Isaac). Instance 2 (gate occupancy): the clearance penalty fires only in swing phase; a dragging policy keeps both feet in contact, so the penalty is constantly 0 for exactly the policy it was meant to fix - and worse, any slight lift immediately incurs it, a reverse threshold. Lowering feet_air_time to 0.5 on that advice measurably collapsed air time to 0.0002 (below v3). Corrected understanding: "clearance 是把已有的摆动相抬高, 造出摆动相仍要靠 air_time" - air_time creates the swing phase, clearance raises it.
Change
Fixed the height zero-point; kept feet_air_time as the swing-phase creator with clearance layered on top; both errors documented as corrections to the team's own earlier advice.
Outcome
With both fixed, swing height rose from 22-23 mm (v2) to 29 mm (v5) to 34 mm (v6); the inert-term failure class entered the standing checklist.
Mechanism
A penalty's gradient exists only where its gate is occupied and its argument crosses its threshold; frame offsets shift the threshold out of reach, and phase gates can have zero occupancy under exactly the policy being treated. Terms interact as an ecology - one term must create the states in which another can act.
Applies when
- adding any gated or thresholded penalty (clearance, impact, slip)
- a new term produces no behavioral change at any weight
- body-frame positions are used in reward code
“body_pos_w 是 ankle_roll_link 坐标系原点,平放触地时仍高出地面 0.0585 m。… (0.03 − 0.0585) 恒为负 → 惩罚永远是 0 … clearance 惩罚只在摆动相生效,拖地时两脚始终触地 → 惩罚恒 0;而一旦轻微抬脚就立刻扣分,对正在拖地的策略是反向门槛。… 正确认识:clearance 是"把已有的摆动相抬高",造出摆动相仍要靠 air_time。”
train/WALK_DIAGNOSIS.md § walk_v4 独立验收 — 本文档给的两处代码/建议是错的 Four in-lineage attempts to widen the standing stance failed - remove a tax, add a joint-space knife, change the target, add a task-space metric penalty - because the stance was the end state of the get-up path; trained from scratch with the right terms it grew right from day one
stance-decided-by-get-up-pathA posture a skill ends in is shaped by the path the policy takes to reach it; if several single-variable edits to the terminal-phase reward cannot move it, stop editing that phase and retrain with the terminal constraint present from the start.
Symptom
v2_6c stood with its feet 0.159 m apart (task-space) and its hips yawed 45-47 deg the same way, which split on the real robot. Standing-phase reward edits did not move it.
Context
V2.7-A removed the flat-feet tax on compensated stances (stance unchanged); V2.7b added a hip-roll lower-bound hinge (+5 deg in 3,000 iterations, yaw ratchet); V2.8 changed the stand_pose target to a wide flat stance (stance unchanged, yaw not unwound, feet nearly overlapping, mu 0.4 transfer 2%); V2.9 penalized lateral spacing in metres (the policy parked just outside the penalty's gate in a lunge, 0% success). The v2_6c get-up goes through a split and closes the feet together as it rises.
Change
In-lineage stance surgery was formally closed. V3.1 trained from scratch with task-space stance terms present from the first iteration (and, after P1, a positive width band instead of a penalty).
Outcome
V3.1 P1b: lateral stance 0.364 m, foot tilt 0.0 deg, all four categories 100%, MuJoCo mu 1.0 and 0.4 both 100% - with a symmetric toe-out the kinematic audit had not enumerated. P1c (with a yaw guard): 0.355 m, all six acceptance criteria passing, mu 1.0-0.4 all 100%; it became the product.
Mechanism
A converged policy does not rebuild the path that produced its terminal posture; a standing-phase gradient only finds the nearest hack around the posture the get-up delivers.
Applies when
- the final posture of a transition skill is wrong and resists terminal-phase shaping
- repeated continuation rungs produce hacks instead of the intended posture
- deciding between another in-lineage fix and a from-scratch retrain
“窄站距 + yaw 扭是 v2_6c 起身策略(劈叉起身 → 双脚并拢收势)的**结构性 终态**,不是站立段的孤立参数 —— 站立形态由起身路径决定,在血统内只动 站立段奖励改不动它。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §44 结果:V2.8 判 FAIL —— 血统内站姿手术第三次证伪 Isaac splits Coulomb friction into static and dynamic columns - wiring only static means zero loss during motion, silently discarding the identified value
sim-api-friction-columnsWhen installing identified actuator parameters, map each measured quantity to the simulator's exact API column for the operative regime (dynamic for moving loss, viscous for damping), verify per joint after landing, and audit how randomization intervals fall on each column's nominal.
Symptom
The hardware-identified Coulomb friction (tau_c) was about to be installed into the trainer through the friction= field alone - which in Isaac 5 populates only STATIC friction, so during motion the joints would lose no torque at all: "只给 static 则运动中不损耗, 辨识的 τ_c 走路时等于没接" (the identified tau_c would effectively not be connected while walking).
Context
The v12 integration wired all three columns deliberately: armature= and friction= from the 2026-08-04 hardware identification, PLUS dynamic_friction= (Isaac 5 splits Coulomb into static/dynamic; the moving-loss column is dynamic) and viscous_friction= (= the measured joint damping 0.02, aligned to MJCF's damping). Each value was re-checked per joint after landing. A DR interaction was audited and booked rather than hidden: randomize_joint_parameters jitters ALL friction columns with ONE interval - the [-0.05, +0.10] band was calibrated against the Coulomb nominal, and landing on the viscous nominal 0.02 it becomes [0, 0.12], "偏宽但保守" (wide but conservative), accepted with the note that pre-viscous behavior was already [0, 0.10] on a base of 0.
Change
Measured actuator parameters installed across all applicable API columns (armature, static, dynamic, viscous), with the DR side effect on shared randomization intervals audited and recorded.
Outcome
The first generation where the identified plant actually acts during motion in the trainer; the silent-column failure mode documented before it cost a training run.
Mechanism
Physics engines decompose "friction" differently (single coefficient vs static/dynamic/viscous columns); a measured parameter is only installed when it reaches the column the solver reads in the regime that matters (motion, not stiction). Randomizers that share one interval across columns rescale the band by each column's nominal - a hidden unit change.
Applies when
- installing identified friction/armature into any trainer
- porting plant parameters between simulators or engine versions
- joint losses in sim do not match bench measurements during motion
“并额外传 dynamic_friction=(Isaac 5 把库仑拆 static/dynamic 两列,只给 static 则运动中不损耗,辨识的 τ_c 走路时等于没接)与 viscous_friction=(= joint_damping 0.02,对齐 MJCF damping)。… randomize_joint_parameters 用同一个 friction 区间抖三列, [-0.05,+0.10] 是按库仑标称标的,落到粘滞标称 0.02 上成了 [0,0.12]”
train/WALK_V12_SPEC.md § 7. 核查单 (Isaac 接 V.ACTUATORS 新字段) Teleop fed the sidewalk axis a command beyond its training band - feet clipped; give each axis its own speed setting
teleop-command-band-per-axisGive every command axis its own teleop scale, clamped to that axis's training band, and reproduce any hardware incident in sim with the exact deployed command values before touching training.
Symptom
Robot stepped on its own foot when sidewalking left under teleop - and only when going left.
Context
The teleop tool used one speed setting for all axes: --teleop-speed 0.20 applied to A/D sent cmd_vy = 0.20, above the training band's top (0.08-0.18) where foot-spacing margin is thinnest. Sim reproduction of the incident (product policy, pw0.8, 5 seeds x 20 s, true collision threshold = single foot width 104 mm): at vy 0.20 the minimum foot distance was 111-115 mm - 7-11 mm from self-collision - vs 147 mm at vy 0.10. Left was 4x more dangerous than right (25% vs 6% of time inside the 160 mm soft wall at vy 0.10), matching the left-only symptom; the margin did not degrade over time (pressing more just lengthened exposure).
Change
deploy_policy gained --teleop-side (default 0.10), separating the lateral speed from the forward speed so each axis's teleop command sits inside its own trained band.
Outcome
Command now inside the band with 43 mm margin at default; the incident became a quantified, reproduced, closed account rather than a mystery.
Mechanism
The policy's competence envelope is the training command distribution per axis; teleop mappings that share one scalar across axes silently command out-of-band inputs on the weakest axis. Asymmetric risk (left vs right) came from the policy's own chirality bias, so a symmetric command produced an asymmetric hazard.
Applies when
- wiring a joystick/teleop layer over a learned policy
- a hardware incident occurs on one command direction only
- training bands differ across command axes
“A/D 一直与 W/S 共用速度档，所以按 A 下发的是 vy = 0.20 —— 既超训练带（0.08~0.18）上沿 … 0.20（遥控实际值）| 111~115 mm | 7~11 mm … 且左比右危险 4 倍 … 处置：deploy_policy 新增 --teleop-side（默认 0.10），侧移与前进档分开。”
train/C_LADDER_RUN.md § 3p. 一 向左走踩到自己 → --teleop-speed 0.20 同时喂给了 vy A DR tail the robot never has is pure cost - stage deterministic plant levels instead of one wide uniform
dr-tail-plant-continuationSet every DR range from the measured deployment distribution and cut tails that hardware cannot produce; when an axis changes the controller's character (delay, major gain regimes), prefer staged deterministic levels with gates over one wide uniform.
Symptom
Two consecutive lineages (s1e, s1f) trained under uniform latency DR (0, 0.06 s = 0-3 frames) both converged to drag-glide gaits - buying survival under heavy delay by giving up swing (3.6 mm) - even though the real pipeline never exceeds ~2 frames.
Context
The account: roughly 1/3 of training quality was spent on the >2 frame tail that hardware never presents ("uniform 尾部 ~1/3 训练质量 花在真机不出现的 >2 帧上"). The deeper reading came from the user: uniform 0-3 frames is not merely tail-heavy - it "把性质不同的控制系统 混进同一 PPO batch" (mixes qualitatively different control systems into one PPO batch); a 0-frame and a 3-frame plant demand different controllers, and one policy trained on the mixture serves neither. The S2 v2 ladder therefore redefined latency "从「随机化参数」重新定 义为 actuator/control plant 的一部分": deterministic FIFO levels, staged 1 frame then 2 frames (lo=hi so fractional interpolation degenerates to exact N frames, synonymous with the harness --delay N), each level gated by the fixed acceptance battery - a plant continuation, not a randomization.
Change
Latency DR replaced by staged deterministic levels covering the measured 1-2 tick reality with no tail; each stage a separate continuation rung with the standard gate and rollback.
Outcome
The s2_lag1 rung showed the clean-signal benefit immediately (survival 20/20, heading 6x recovery) with the swing cost booked honestly (21 -> 12 mm, half-pass, ladder paused for adjudication); the drag-glide attractor from uniform tails did not recur.
Mechanism
DR asks one policy to cover a plant family; when part of the family is fictitious, the policy pays real capability for fictitious robustness, and when family members demand structurally different controllers, gradient averaging produces a compromise controller optimal for none. A measured, discrete plant set matches the actual deployment support and keeps each rung's training signal coherent.
Applies when
- policies converge to degenerate gaits that buy worst-case survival
- a DR range extends well past the measured hardware range
- choosing between wide randomization and a staged ladder on an axis
“两轮实证(s1e/s1f)宽尾延迟 DR 逼出拖地滑行 … uniform 0~3 帧不止尾重,而是把性质不同的 控制系统混进同一 PPO batch;1→2 帧确定性分级 = plant continuation,训练信号干净得多—— latency 从「随机化参数」重新定义为 actuator/control plant 的一部分。”
train/OMNI_V0_SPEC.md § 4. v2 阶梯 (2026-08-07 用户定) Slowing the gait clock at deployment is out-of-distribution and backfires - lower the commanded speed instead, or train the knob
cycle-time-override-is-oodAny deployment override must correspond to a dimension the policy was trained to handle; to make a parameter field-adjustable, randomize it in training and observe it - otherwise use the levers inside the trained envelope (commands) and leave the knob alone.
Symptom
Real-robot feedback "walks very fast and unstable" suggested slowing the gait; a deploy-side --cycle-time override existed, making "just slow the clock" a one-flag temptation.
Context
A sim sweep of the override on walk_v6 @cmd 0.3 showed monotone degradation away from the trained 0.40 s cycle: at 0.50 s tilt jumped 7.9 -> 13.2 deg and landing force 1.52x -> 2.24x; at 0.80 s (half speed) clearance collapsed to 3 mm - dragging again - with 20 deg tilt. Meanwhile the legitimate lever, lowering the commanded speed with the clock untouched, improved everything monotonically: cmd 0.1 gave 104% tracking, 6.7 deg tilt, minimum slip - the most stable operating point. The file distinguishes the two "slows" explicitly: lower command = smaller steps at the same 2.5 Hz rhythm; a slower rhythm itself requires retraining - randomize cycle_time (e.g. 0.40-0.65 s) during training and expose it as an observation, and only then does --cycle-time become a field-adjustable knob.
Change
Deployment guidance: never ship a cycle-time override the policy was not trained under; respond to "too fast/unstable" with lower commands; schedule clock variability as a training-time (contract-level) change if a field knob is wanted.
Outcome
The sweep quantified the trap before hardware paid for it (dragging and 2.2x landing force at slowed clocks); cmd 0.1 documented as the stable demo point.
Mechanism
The policy is a function fitted around the training distribution; a deploy-side override moves an input (phase rate) to values never seen, so behavior degrades unpredictably - the knob LOOKS like a capability because it exists in the code, but capability lives in the training distribution, not the interface.
Applies when
- a deploy tool exposes overrides (clock, scale, gains) beyond the training distribution
- hardware feels "too fast/aggressive" and a quick knob exists
- deciding between a deploy-side tweak and a retrain
“0.80s | 1.25Hz | 0.165 | 3mm(拖地) | 20.0° … 慢一半直接崩 … 策略按 0.40 训练, 别的周期属分布外。… 降指令速度才是有效杠杆 … cmd 0.1 是最稳的工作点。… 要节奏本身变慢必须重训 —— 训练期把 cycle_time 随机化(如 0.40~0.65s)并作为观测的一维, 部署时 --cycle-time 就成了现场可调的旋钮。”
train/WALK_DIAGNOSIS.md § 2026-08-01 追加: 调慢步态时钟(--cycle-time)在仿真里是反效果 Fix a too-deep nominal pose before adding any penalties - the default stance defines the basin training starts in
nominal-posture-before-penaltiesBefore tuning penalties on a degenerate gait, audit the nominal pose and height targets against morphology and published ratios; if the default stance encodes the degenerate behavior, fix it first - and recompute dependent quantities (init height) by FK, not by hand.
Symptom
Policy lived in a crouched shuffle; nominal knee angle was 0.5 rad (28.6 deg) - deeper than published configs (Unitree G1 0.3 rad / 17.2 deg, Booster T1 0.4 rad) - so the policy's starting point and its action-space center both sat inside the crouch basin.
Context
Initially ranked "secondary" in the local diagnosis, this was promoted to co-first priority by the cross-check against published reward tables, which states that with nominal knee flexion above ~0.4 rad, fixing the posture must precede adding any penalties ("改这个之前别加任何 惩罚都是白费"). Companion base-height items: walk profile had weakened base_height_l2 to -5.0 (base class -10, field standard -10 to -20, "the second most common cause of death"), and the height target must be the STANDING height (0.384), not the crouch height.
Change
Nominal knee 0.5 -> 0.3 rad with init_base_height recomputed by MuJoCo FK (0.3739 -> 0.3802); base_height_l2 restored to -10 with standing height target; both bundled as first-priority alongside the clearance term.
Outcome
Part of the v5/v6 package that lifted swing height to 34 mm and tracking to 87%; the crouch basin stopped being the default answer.
Mechanism
The nominal pose is the fixed point every regularizer pulls toward and the point where action=0 lands; if that point is itself the degenerate posture, every penalty fights the geometry. Correcting the attractor is prior to shaping the gradient field around it.
Applies when
- policy converges to a crouched or collapsed posture
- nominal joint angles were chosen for stability rather than gait
- base-height reward targets or weights were locally weakened
“研究明确说"nominal 膝屈超过 ~0.4 rad 必须先改,改这个之前别加任何惩罚"。我们是 0.50,超标。… base_height_l2 在 walk profile 里被减到 −5.0(基类是 −10)。研究说这是"第二常见死因"且应 −10 ~ −20。改回 −10。目标高度用站立高 0.384 是对的(研究要求 target 必须是*站立*高度而非蹲姿)。”
train/WALK_DIAGNOSIS.md § 修正 ①(升级优先级) / 修正 ④ Export every CAD part in the whole-machine frame so URDF rotations are zero and inertia is exact
urdf-shared-origin-exportGenerate the model so that correctness is structural: shared-origin STL export, zero rotations, subtraction-only origins, and an explicit 1e-9 g*mm^2 -> kg*m^2 conversion - never hand-rotate inertia tensors.
Symptom
Hand-assembled URDFs accumulate per-link rotation/origin errors and unit-conversion mistakes in inertia tensors - silent plant corruption that no later calibration can cleanly fix.
Context
Documented CAD -> URDF -> USD procedure from a successful Isaac Lab deployment, kept as the recipe if Lucen regenerates its model.
Change
(1) In CAD, align the whole robot to Z-up, X-forward (Isaac Lab convention) and ground the assembly; (2) export each STL with other parts hidden but the machine's shared origin kept, so all parts share one origin, every URDF rotation is 0, and inertia matrices equal CAD values directly; (3) units: Fusion 360 gives g*mm^2, URDF wants kg*m^2 - multiply by 1e-9; (4) link origin = negative of the joint position; link COM = CAD COM minus joint position; joint origin = difference of the two joint positions; (5) after URDF -> USD import, open the USD separately and set it instanceable before saving.
Outcome
A URDF whose rotations are all zero and whose inertia tensors are CAD-exact, eliminating an entire class of hand-transcription plant errors.
Mechanism
Keeping one shared origin turns every frame transform into a pure translation computable by subtraction, and leaves inertia tensors in the frame CAD already computed them in - no rotation of inertia tensors, the most error-prone manual step, is ever needed.
Applies when
- building or regenerating URDF/MJCF from CAD
- inertia or frame bugs suspected in the plant model
- importing URDF into Isaac Lab / USD
“导出 STL 时隐藏其他零件但导出整机——这样所有零件共享同一原点，URDF 里所有 rotation 全是 0，惯量矩阵直接等于 CAD 值 / 单位：Fusion 360 给 g·mm²，URDF 要 kg·m²，乘 1e-9 / link origin = 该关节坐标取负 … URDF → USD 导入后必须单独打开 USD 设成 instanceable 再存”
Experience.md § URDF 制作流程 (lines 87-92)