Training Coach
Doctrine
A report may cite any of these as doctrine-N.
doctrine-1Contract freeze and fingerprint disciplineThe policy I/O contract (observation layout, scales, history semantics, action pipeline) is frozen and fingerprinted; every exported policy is stamped and verified; contract changes ship as new versioned profiles that leave old artifacts bit-identical, and old policies run forever under their era's pinned profile.
Case. The 215-dim omni contract was frozen with a three-machine digest; the one contract-level extension (lateral feed-forward) went in as a new `omni_ff` profile with the old profile provably untouched, and the contract checker caught two real wiring bugs before any training (`contract-freeze-and-checker`). A silently changed gait-clock default would have fed old policies a 25% slower clock - closed by pinned legacy profiles (`legacy-profile-pinning`). A stale derived USD forked plant mass 2.2% until an automated source-vs-derived instrument gated it (`derived-asset-staleness-check`). A gain profile is part of the closed loop a policy was trained in and belongs in its stamp; the recovery line's anchored authority was left out of its manifest and recorded as the gap not to repeat (`gain-profile-belongs-in-the-stamp`), and a second policy behind a deploy-side switch made the handoff state itself a contract (`recovery-two-policies-and-a-state-machine`, `walk-recovery-fsm-handoff`).
Coach application. On any proposal touching obs/action semantics, defaults, or derived assets: demand the version/profile plan, the fingerprint update, and the checker extension in the same change; flag any old artifact that would run under new defaults.
doctrine-2Attribution by resolved training params - never eval-override knobsCapability differences between lineages are explained only by digging each lineage's *resolved* training configuration and eliminating columns; evaluation-side override knobs (kd-scale, power-scale, cycle-time) act on the plant for *every* policy and may serve as deployment mitigations but never as explanations.
Case. Low-friction robustness across 8 lineages x 3840 cells was traced to kd DR *bandwidth* - every lineage had ground friction pinned to (1.0,1.0), so "trained friction" could not be the axis; the parameter axis and the plant axis were explicitly separated after the first attribution conflated them (`kd-bandwidth-mu-law-attribution`). "Weak turning" on hardware was a power-scale plant effect, not a training gap (`deploy-knob-attribution-before-retraining`); slowing the deploy clock was out-of-distribution, not a feature (`cycle-time-override-is-ood`). The ground truth for what a run trained under is the logged per-run config, not the source tree (`resolved-config-is-source-of-truth`).
Coach application. Whenever asked "why is lineage A better", require the resolved-param table first; kill zero-variance columns; refuse explanations phrased in eval-knob terms; when a knob helps, label it deployment mitigation.
doctrine-3PASS gates become constraints; FAIL gates become objectivesOnce a skill passes its gate, that gate converts into a standing regression constraint (budget <= 2/20 against the parent baseline) for all later training; gates currently failing are the only legitimate objectives of the next rung.
Case. The C ladder ran one frozen 13-cell x 20-seed matrix at every rung with promotion = "new skill PASS and old skills within regression budget"; C1 was stopped and re-rooted precisely because it trained away the root's backward PASS (`fixed-acceptance-matrix-per-rung`, `preregistered-stop-criteria-per-rung`). The C4 product shipped only at 260/260 cells with zero regression.
Coach application. Keep the ledger: every PASS adds a constraint row; propose rungs only against FAIL rows; treat any constraint violation as stop-and-attribute, never "the next rung might win it back".
doctrine-4One variable per ladder rung - counted against what the checkpoint sawA rung changes one variable, where "one" is counted against the checkpoint's actual training state, not against the current config's diff; batching is allowed only when each change owns a disjoint symptom space with a pre-registered ablation order.
Case. Two rungs failed identically because resuming s1e-500 under the evolved config silently added four plant variables the checkpoint had never seen ("单变量纪律不只看「我改了什么」,还要看「checkpoint 见过什么」" - `resume-state-dr-audit`). v8 legally batched four orthogonal fixes with a written ablation order (`orthogonal-batch-with-ablation-order`); v9 spent one run completing a 2x2 factorial so either outcome convicted a factor (`fill-the-missing-factorial-cell`); v10b's three-way ablation wrongfully convicted the clock and had to be retried fairly.
Coach application. Before any resume: diff cfg against the checkpoint's logged training state. Before any batch: require the symptom-ownership map and ablation order in writing.
doctrine-5Pre-register risks, readings, and stop criteria before the ladderBefore a ladder or risky rung, write down the known risks, the interpretation of every plausible outcome, and hit-any-one stop criteria - frozen before training, tightened when priors say results should come fast.
Case. The C ladder opened with three numbered risks including the exact falsification condition for its own root choice; A/B arms carried "预注册读法(事后不改)" tables; a level expected to fail was run anyway for its pre-registered diagnostic value (`preregister-risks-and-fork-readings`). Stop criteria caught C4-redo rungs at +200 instead of full caps (`preregistered-stop-criteria-per-rung`); hardware sessions pre-registered per-config expected signatures and the disagreement rule "不改结论改账" (`preregistered-real-expectations`, `feasibility-accounts-lock-design-point`).
Coach application. Refuse to open a rung without the written risk/reading/ stop block; after results, read conclusions off the pre-registered table and flag any post-hoc reinterpretation.
doctrine-6Plant parameters are measured, never inventedEvery plant number carries measurement provenance: armature = N^2 x rotor inertia from no-load tests, friction split by rig and by API column, torque limits shaped by per-joint gait peaks, latency traced through the real pipeline, masses weighed - and DR bands are additive around the measured nominal, sized to the measured dispersion.
Case. Guessed friction was 2.5x low and guessed damping 5x high (`friction-measured-not-guessed`); armature had been 0 with a 9:1 gearbox (81x reflected inertia, `armature-n2-rotor-inertia`); a uniform torque derating was "the wrong shape" vs measured peaks (`torque-limit-shape-by-measured-peaks`); the delay implementation itself was a wrong plant for a whole lineage (`latency-lerp-reverse-extrapolation`); the run design point was locked by three accounts including the tau_limit/kd speed ceiling (`feasibility-accounts-lock-design-point`); identified friction had to land in the right simulator API columns to act at all (`sim-api-friction-columns`). The recovery and one-leg lines opened with the same kind of accounts before any reward existed - a connected static path and the torque along it for an armless get-up, and the gains single support needs to be holdable at all (`get-up-feasibility-accounts-before-training`, `single-support-gain-authority-probe`).
Coach application. For any plant value in a config review, ask "measured how?"; reject absolute ranges with no nominal; check API column mapping and derived-asset regeneration whenever measured values land.
doctrine-7Sim2sim gate before sim2real - under deployment conditionsEvery checkpoint passes a second, independently built simulator before hardware, and both the gate and the smoke loop run under the measured deployment conditions (real pipeline delay, honest contact parameters, the deployment gain/power profile).
Case. The standing order "先sim2sim 再sim2real" (`sim2sim-gate-before-sim2real`); acceptance flipped to match hardware only under measured condim/torsional friction (`eval-plant-honesty-contact-params`); gates moved permanently to `--delay 2` after the kicking incident (`pipeline-latency-is-plant-not-dr`); and the harness itself must be audited - a frame-convention bug in the cross-sim evaluator invalidated a whole line of verdicts (`body-frame-velocity-api-audit`). The recovery line's second simulator caught a torque penalty paid for by bracing the legs together (`torque-penalty-bought-by-leg-bracing`), and a 1.8x torque disagreement between the two plants stayed binding because its one surviving explanation was never tested (`torque-disagreement-between-simulators-unresolved`).
Coach application. Block any hardware request lacking a second-sim PASS at deployment conditions; when sim2sim and training-side metrics disagree, treat the evaluator as a suspect too.
doctrine-8Observation honesty - the actor's inputs are a hardware contractThe actor observes only signals the real robot produces with realistic noise; privileged truths go to the critic; history windows are estimators and must train under plant variation; rewards on quantities the actor cannot observe buy only average suppression, never closed-loop correction.
Case. Ground-truth velocity/forces went critic-only (`observation-honesty-critic-only`); frame_hist under zero DR memorized the trainer's plant fingerprint - 0/20 transfer (`history-obs-needs-plant-variation`); world-frame yaw rewards could not teach pull-back because heading is unobservable to the actor - correction was routed to the deploy outer loop instead of breaking the contract (`reward-observability-limit`, `deploy-heading-loop-and-align-training`).
Coach application. Audit every actor-obs element for hardware existence; require minimal plant jitter whenever history/recurrence exists; for each reward, ask "can the actor see this error?" and route correction tasks to outer loops.
doctrine-9Reward economics are audited in realized currencyReward design decisions are made on realized per-step magnitudes under the actual policy and command distribution: price the do-nothing optimum before adding a mode, compare achieved values to the computed ignore-floor, calibrate thresholds between measured healthy and sick distributions, and ship every new penalty with a withdrawal clause.
Case. feet_air_time at weight 2.0 realized 0.038 vs tracking 1.2 - drag was rational (`realized-contribution-audit`); ignoring a vy command cost 28-180x less than ignoring vx until a gated tracking term was added (`reward-cost-of-ignoring-audit`, `gate-new-reward-terms-by-command`); achieved-vs-floor separated "never learned" from "priced out" (`ignore-floor-diagnosis`); the foot-distance wall was placed between measured healthy (0.6% tax) and sick (55%) policies (`calibrate-threshold-between-healthy-and-sick`); the landing penalty carried a pre-registered stand-down condition and actually stood down (`calibration-threshold-with-withdrawal-clause`); two clearance terms were inert until zero-points and gate occupancy were checked (`inert-reward-term-audit`). A get-up policy sat because three gated terms paid the seated pose 84% of the return and the one term that could tell sitting from standing was an exp kernel reading 4.6e-5 at the real error (`seated-basin-dead-exp-kernel`); a torque-tail term was weighted by its measured steady value beside a peer term after the estimate proved 12x off (`tail-torque-needs-hinge-on-computed-demand`).
Coach application. Never discuss weights in the abstract: demand the realized-contribution table, the ignore-floor number, and the healthy-pay calibration before any reward edit is approved.
doctrine-10The zero-cost option must be the desired behaviorFor every penalty, name what the zero-cost option is; penalize failure events (slip, saturation excess, contact in flight windows), never the motion or joints that healthy behavior uses; make degenerate strategies fatal via termination where penalties cannot price them out.
Case. Joint-usage penalties for drift taxed a 1.4%-of-momentum channel 2.7/step and collapsed training; the slip penalty costs a non-slipping gait exactly zero (`penalize-the-slip-not-the-joint`). A frozen-at-clamp joint pays zero action-rate forever - only a pre-clip saturation penalty flips the cheat economics (`saturation-cheating-zero-rate-cost`). Ungated phase shaping made standing 42x more expensive than stepping and cooked the hip motors (`moving-gate-42x-stand-tax`); crouch-shuffling lived until a height termination deleted it (`termination-closes-degenerate-basin`). A gated penalty is an exit: the policy parked just outside an uprightness gate, then just under a height gate, to stop paying a stance tax, and only a positive band plus an always-on guard closed both (`penalty-gate-is-an-escape-hatch`); a soft-limit penalty that charged the standing pose itself bought a 4.1 deg lean (`soft-limit-penalty-charges-nominal-pose`); an unpriced foot attitude was spent on edge-standing (`unpriced-foot-attitude-is-a-free-variable`); and the one-leg line listed its cheapest cheats before training and still met one through a zero-gradient band (`enumerate-cheapest-cheats-before-training`, `binary-band-reward-fake-touchdown`).
Coach application. Run the "零代价的选项是什么" audit on every proposed term; convert motion taxes into event-conditional penalties; check the termination set against each known degenerate strategy.
doctrine-11Measurement discipline: independent referees, signs, distributionsA disputed measurement is adjudicated only by an independent algorithm from raw state; directional ability requires sign-antisymmetry under command reversal; bimodal metrics are reported as mode shares (never medians, never 3 seeds); ratios are not comparable when totals change; reward values compare only within one command distribution; single chaotic events never cross machines.
Case. The triple reversal - a good metric was "refuted" by a sibling metric that shared the disease (`independent-referee-for-metric-disputes`, `body-frame-velocity-api-audit`); same-signed +/- responses were bias, not turning (`same-sign-response-is-yaw-bias`); the swing median sat in a bimodal gap (`median-hides-bimodal-distribution`); "v6 is jitterier" died on absolute energies (`ratio-metrics-need-absolute-check`); yaw gain measured 15x wrong in an oscillating frame (`heading-integral-not-body-rate`); a 44% improvement evaporated under same-distribution comparison (`same-distribution-reward-comparison`); drift direction was a limit cycle (`multiseed-sign-test-for-drift`); a cross-machine push cliff was chaos (`single-impulse-recovery-is-chaotic`).
Coach application. Before accepting any surprising number: ask for the independent recomputation, the sign pair, the distribution shape, and the comparison conditions. Retract in writing when a metric falls.
doctrine-12The deployment pipeline is plantIrreducible pipeline properties - action latency, rate limits, power/torque scaling, teleop command mappings - are part of the nominal plant, modeled from day one and reproduced in every gate; deploy-side scalings are crutches that flag unmodeled plant, and they cannot be algebraically folded into training constants.
Case. Right-leg kicking was over-trained-delay x loop gain; power 0.8 was a gain-reduction crutch that retired when the delay was modeled (`pipeline-latency-is-plant-not-dr`); power derating damages non-forward axes first (`power-scale-hurts-nonforward-axes`); training at 0.4 scale as the "twin" of deploying 0.5 x 0.8 collapsed 0/20 (`deploy-scaling-not-training-equivalent`); one shared teleop speed sent an out-of-band lateral command and the robot clipped its own foot (`teleop-command-band-per-axis`); the latency DR range had not even covered the measured pipeline (`latency-dr-covers-measured-pipeline`). A rate limiter added at deployment only clipped a policy that kept commanding (`deploy-rate-limiter-windup`); moved into training and anchored on the last command it became an integrator in the balance loop (`slew-anchor-is-an-integrator`); anchored on the measured angle it bounded torque and kept the bandwidth (`beta-anchored-action-target`). The walking lines' safe setting, power-scale 0.8, cut the ends of the recovery policy's full-range travel and left its spikes alone; a gain inside the trained band did the job (`power-derating-cuts-full-range-contract`).
Coach application. Demand the measured pipeline latency/limits in the plant model and in gate conditions; treat every deploy-side derating as a question ("what is this compensating?"); block per-axis command sources that exceed training bands.
doctrine-13DR budget is finite; its distribution is the measured supportRobustness is a conserved budget: disturbance training on an already-hardened lineage borrows from existing margins; DR ranges span the measured deployment support - no fictitious tails (they buy degenerate gaits), no single constants (they allow thin-margin specialization); harden the plant only after the task distribution is final.
Case. The same push dose helped a narrow lineage and damaged a balanced one - budget conservation (`push-dr-conditional-budget-conservation`); wide latency tails bought drag-glide, constant values shipped 60% thinner tilt margins - the answer is a narrow band on the measured support (`dr-tail-plant-continuation`, `constant-value-dr-overfits-margin`); task-first ordering because hardening a soon-to-change task wastes budget (`task-shaping-before-plant-hardening`); COM randomization used deliberately as a behavior-shaping tool, and rolled back on symptom per its own contract (`com-randomization-forces-leg-spread`, `com-dr-rollback-on-symptom`). DR that is switched on can still be thin: the run policy fell in the frontal plane its gain-and-latency randomization never touched (`thin-dr-judged-by-channel-coverage`), and a friction priority settled under one action contract had to be re-measured under the next (`friction-priority-re-measured-after-plant-change`).
Coach application. Before any DR rung: check the untrained policy against the spec, the lineage's current DR load, and the measured real-world range; after it: audit retained margins, not just the new tolerance.
doctrine-14Gates measure what hardware feels: posture, margins, stripped assistsAcceptance batteries carry posture-class rows (tilt max median, per-joint L/R asymmetry, temperature) beside task rows, graded margin columns beside binary gates, chirality scored per side, at least one condition that removes the environment's free stabilization, and validated predictive scalars promoted into the gate.
Case. Three same-shaped judging errors - survival, displacement, wz-difference - all missed what the operator felt; posture metrics had the predictive power (`task-metrics-vs-posture-metrics`, `stand-gate-posture-not-survival`); binary survival saturated and hid a 60% margin gap (`constant-value-dr-overfits-margin`); v5 passed everything on the ground and failed suspended (`suspension-probe-removes-free-stabilizer`); the hip_roll (l+r) scalar predicted real drift direction and ordering and entered the battery (`hip-roll-sum-predicts-lateral-drift`); averages hide chirality (`chirality-scored-separately`); gait-quality gates are judged at speeds that demand a gait (`low-speed-commands-reward-dragging`). The recovery line added the rest of the kit: where failed episodes end, not only where they started (`end-state-confusion-matrix`); a frozen acceptance distribution with a pinned seed (`frozen-acceptance-distribution-and-pinned-seed`); video of the metric rollout itself (`video-as-acceptance-record`); and the admission that a 10 s episode cannot see a stance that fails after a minute (`episode-length-bounds-what-a-gate-sees`). The one-leg line removed a foot-spacing wall that no gate measured, and the feet met on hardware (`removed-wall-returns-on-hardware`).
Coach application. Review every battery for posture rows, margin columns, per-side scoring, and an assist-stripped condition; when operator feel and gates disagree, suspect the metric class first.
doctrine-15Fork and root selection: recoverability, maturity, frozen rewardsChoose fork roots by which candidate's deficits the coming training can pay back (precision is recoverable; lost plasticity, symmetry, and margins are not); prefer mature checkpoints as roots even when younger ones score better as products; never fine-tune through a reward change - continuation is legal only with the reward frozen and plant/DR widening one rung at a time.
Case. s1e-500 beat higher-precision candidates because its exclusive strengths were unrecoverable (`fork-root-recoverable-shortfall`); the b300 arm proved maturity is capital against adaptation shock (`root-maturity-vs-product-quality`); the B-arm scatter/half-recover/collapse signature falsified reward-change fine-tuning and drew the legal boundary for S2 continuation (`fine-tune-reward-change-falsified`).
Coach application. For root debates, build the exclusive-strengths table and ask "which side can be trained back?"; require dual-arm evidence for maturity claims; classify any proposed continuation as reward-frozen or not before approving.
doctrine-16Curricula: verified engagement, lineage counters, disease-phase gatingAutomatic curricula must prove they engage (a saturated ratchet is constant DR wearing a curriculum's name); every ramp counts lineage-cumulative progress, not per-process steps; penalties aimed at late-stage pathologies ramp in after exploration noise decays; difficulty rises on measured per-stratum success, never on schedule.
Case. The s1f ratchet capped at iter 248 and never engaged (`auto-curriculum-engagement-check`); the saturation ramp re-fired at +600 after every resume and no shipped product ever saw the penalty (`curriculum-counter-lineage-steps`); the same penalty worked once gated to the disease phase and became an untouchable mechanism (`gate-penalties-to-the-disease-phase`); record-high aggregate reward hid a fully-failing delay stratum (`aggregate-metrics-mask-subgroup-failure`); bucket share is not a gradient lever (`bucket-share-is-not-a-gradient-lever`). An assist curriculum keyed to a pooled success share was withdrawn on the strength of the categories that already worked (`curriculum-criterion-conditioned-on-lagging-category`); a pace set by per-step income moved only when that income was time-gated (`per-step-income-drives-speed-time-gate`), and the same gate had to be retired in a lineage without the disease (`time-gate-vs-wide-stance-retire-the-fix`).
Coach application. Ask every curriculum three questions: does it engage (show the internal state)? what does it count (process or lineage)? when is it present (against the pathology's phase)? Check where shipped checkpoints sit relative to every ramp.
doctrine-17Probe before training: feasibility first, hypotheses in tablesAfter two failed training attempts at a skill, stop training: demonstrate the behavior open-loop, enumerate hypotheses in a written table audited against actual configs cheapest-first, race one probe per side of the sim2real boundary for hardware-only pathologies, and use suspended tests to acquit or convict actuators before blaming authority.
Case. "在黑暗里试钥匙" - four sidewalk rungs failed until an open-loop probe separated exploration/waveform/authority in one experiment (`open-loop-probe-before-reward-tuning`); the foot-drag mystery fell to a seven-hypothesis config audit (`hypothesis-table-code-audit`); the period-doubling was resolved by racing a reward-side and a plant-side evidence line - and both paid off, one per sub-case (`period-doubling-evidence-race`); the suspended test acquitted the roll actuator in one measurement (`suspended-test-isolates-actuator-authority`). A read-only configuration probe told a wall from a slope in the recovery line's seated basin (`configuration-probe-wall-not-slope`), and the fix it pointed to - where the feet are - took prone from 0/159 to 158/159 (`prone-dead-end-is-foot-placement`); a knob that did not move its variable was recorded as no test of the idea (`dof-vel-penalty-is-not-a-pacing-knob`).
Coach application. When a skill resists training, prescribe the probe before any further reward edits; require verified target trajectories before imitation terms; keep a falsified-fixes list so closed roads stay closed (`amplitude-cut-falsified-yaw-fix`).
doctrine-18External advice is recomputed locally; values transfer as ratiosEvery external suggestion is classified adopt / already-have / modify / trap by recomputing its claim on the local reward table and probe data; numeric values transfer only as dimensionless ratios (to tracking weight, leg length, sqrt(gL), control rate); citations are verified to exist.
Case. "Start vy very small" would have destroyed sidewalk learning on this reward table - the gradient scales quadratically (`external-advice-audit-against-own-arithmetic`); swing-height targets and weights transferred correctly only through leg-length and tracking-ratio scaling (`transfer-ratios-not-absolutes`); the "6-step delay" was refused for lacking a control rate (`latency-dr-covers-measured-pipeline`); a borrowed reference's structure was FK-verified and its amplitude re-derived from the division of labor (`reference-structure-fk-amplitude-division`); retrieval agents fabricated verbatim arXiv quotes - only source-verifiable material was used; and one dismissed suggestion later proved right for a different mechanism, and was credited (`cycle-average-tracking-for-gait-quantities`). An advisor's staged state machine turned out to exist in none of the three papers it cited, and reading them changed the plan (`advisor-paraphrase-vs-paper`).
Coach application. Intercept every "paper X does Y" with the local recomputation; convert absolutes to ratios before comparison; verify quotes; revisit dismissed advice when new mechanisms appear.
doctrine-19Hardware sessions are scripted experiments, not tuning sessionsReal-robot time executes a pre-registered matrix: risk-ordered (baseline first, fragile last with a spotter), stage-gated (suspended smoke before ground), A/B sessions bracketed by a repeated reference run, operators briefed on measured zero-command and untrained-axis behavior, chirality-aware disturbance protocols, no field tuning - the only legal field changes are scripted, single-variable, and self-reversing.
Case. The S2 acceptance sheet (`risk-ordered-real-deployment`, `battery-bracketed-real-ab`, `know-zero-command-behavior`, `push-test-chirality-protocol`, `no-field-tuning-protocol`); the RAM-only torque experiment with automatic power-cycle rollback (`reversible-single-variable-field-experiments`); and the sim-veto rule - even sim's condemnations get one safeguarded hardware check when they judge the purpose-built configuration (`sim-veto-needs-real-confirmation`). The recovery line's first real run went ahead with its preconditions unmet and was stopped as dangerous (`first-real-get-up-violent-stage-one-policy`); after it: a staged hang, mat and floor protocol (`staged-hang-mat-floor-for-get-up`), a fixed power-cycle pre-flight and two-machine discipline (`power-cycle-preflight`, `two-machine-config-discipline`), a fall guard replaced rather than switched off (`fall-guard-becomes-a-state`), and logs that are part of the run (`hardware-log-is-the-attribution-input`).
Coach application. Turn every hardware request into a runbook with order, gates, brackets, briefing, and anomaly plays; refuse improvised parameter changes on the floor.
doctrine-20Close questions in writing; restart when the debt is structuralAudited questions get frozen verdicts with citable wording and an explicit reopening bar; hardware verdicts are dated by deployment-stack and calibration state and expire when those change; and when successive rungs shuffle symptoms without net progress, freeze the lineage as regression baselines, pay the structural debts, and retrain minimal - carrying laws and instruments, not weights.
Case. The chirality and COM questions were closed with frozen wording and "no reopening without new hard evidence" (`frozen-verdicts-semantic-boundaries`); v5/v6's condemnations expired with the deploy stack (`stale-verdicts-under-old-stack`); a 2-degree calibration fix moved the whole runnable envelope (`zero-offset-calibration-shifts-envelope`); plant upgrades are era boundaries with paired re-baselining (`plant-swap-invariants-vs-shifts`); and the 2026-08-05 reset froze v5-v11, fixed the latency FIFO / manifest / sampling / reward-table debts, and restarted - producing the lineage that reached hardware SOTA (`freeze-lineage-fix-structure-restart`, `minimal-reward-table-with-provenance`). The recovery line's real-robot verdicts ended up in three places that disagree, one of them an undated note in a command file (`write-hardware-verdicts-back`).
Coach application. Maintain the closed-questions ledger and quote it when symptoms recur; stamp verdicts with stack/calibration versions; when a team is three rungs into symptom-shuffling, raise the restart question explicitly with the freeze-fix-restart pattern.
doctrine-21Name the quantity in the space it lives inA goal, reward term or acceptance criterion about the feet, the base or the contact state is computed from the quantity itself - world poses, forces, per-category outcomes - never through a joint-angle, single-signal or pooled stand-in that assumes everything else sits at nominal; and every detector is validated on a behaviour known not to contain the event before it becomes a gate.
Case. The recovery line was caught three times: |ankle roll| as "flat feet" sold stance width and the real robot slid into the splits, a hip-roll criterion was confounded by 50 deg of yaw, and the joint table said 0.271 m where the feet were 0.159 m apart; task-space terms produced the first flat, wide stance (`joint-space-proxy-for-task-space-quantity`). Flight detection lied in both directions across two lines - foot height flagged 40% false flight on a walking gait, contact force alone flagged slip chatter as hops (`contact-detector-single-signal-lies`). A pooled height average described a robot that did not exist - six in ten standing, four in ten sitting (`zero-partial-credit-is-not-an-iteration-problem`) - and the walking line had learned the same lesson on yaw rate (`heading-integral-not-body-rate`).
Coach application. For every reward term and gate row, ask what physical quantity it stands for and whether it is measured directly; flag joint-space or single-signal stand-ins for task-space goals, ask for a detector validated on a negative control, and split pooled metrics by category before reading them.
doctrine-22Continuation needs a live gradient; a release is chosen by a scanContinue a converged policy only on a change that creates a live gradient, on a short budget, with every checkpoint scanned on the transfer axis; choose a release by running the full battery over a band of checkpoints and stop on signals, never by taking the last one; and when edits to the terminal phase cannot move a behaviour, roll back and retrain with the constraint present from the start, keeping the order in which the lineage acquired its mechanisms as explicit curriculum phases.
Case. A continuation with no new gradient drifted MuJoCo transfer from 100/98% to 80/28% while every Isaac gate stayed perfect, and a live-gradient continuation at the same depth kept it (`converged-continuation-is-poison`). One-leg checkpoints 100 iterations apart failed 1 and 38 of 40 cells, and late ones degraded (`checkpoint-choice-is-a-full-gate-scan`). Four in-lineage stance fixes failed because the stance was the end of the get-up path, and from scratch it grew right (`stance-decided-by-get-up-path`); fixes stacked on degraded states were rolled back by the user (`stop-stacking-roll-back-and-audit`); and the lineage's final recipe, trained from scratch in one run, sat at 0% because the order of its curriculum was part of the product (`curriculum-history-is-part-of-the-product`). The omni line's short adaptation budgets and mature roots are the same law seen from the other side (`continuation-budget-not-from-zero`, `root-maturity-vs-product-quality`).
Coach application. Before approving a continuation, ask for the new gradient, the budget and the transfer axis in the scan; before approving a release, ask for the scan; after three rungs without progress on the target, propose rolling back to the last good checkpoint and a from-scratch phase plan instead of a fourth patch.
Experience cards
142 cards matching “time-gate-vs-wide-stance-retire-the-fix”.
Order hardware runs by sim risk, gate each stage on the last, and put the fragile cell last with a spotter
risk-ordered-real-deploymentScript hardware sessions as a risk ladder: baseline first, sim-riskiest last with a spotter, suspended smoke before ground, each stage gated on the previous, environment (floor mu) recorded as a selection input - and stop at the stage that misbehaves.
Symptom
Five policy-x-gain combinations had to go on hardware in one session, with sim survival ranging from 20/20 down to 17/20 (and zero-command survival down to 2/20) - an unordered session risks breaking the robot on an avoidable run.
Context
The execution sheet fixed the order as sim-risk low to high, control baseline first (current SOTA establishes the floor reference), the fragile cell (fric-2400@kd1.0) last with a person spotting throughout. Stage gating: suspended smoke (feet off ground, 10 s each, all five pass before anything touches down) -> suspended with IMU and forward command (gait forms in the air) -> grounded runs -> speed raise only for combos that survived the previous stage -> zero-command tests only with a spotter, ordered by sim zero-cmd survival, with the 2/20 cell skipped by default. Preconditions include recording the floor material and estimating mu (if mu <~0.6, sim says pick the kd1.2 gain as main), port/CAN self-check, calibration frozen. Any stage failing stops the session at that stage: "任一段出问题就停在那一段, 不要跳到下一段".
Change
Session structured as a risk ladder with per-stage gates instead of a flat checklist; per-combo sim survival numbers written into the run table as the ordering key.
Outcome
The session design localized any failure to the cheapest stage that could reveal it, kept the robot safe for the informative fragile run, and made the control baseline available before any comparison run.
Mechanism
Hardware sessions consume a shared budget (robot integrity, battery, floor time); ordering by predicted risk means information is bought cheapest-first, and stage gates convert an expensive failure into a cheap earlier one. Baselines run first because every later reading is relative to them.
Applies when
- taking multiple policies/configs to hardware in one session
- a candidate is known-fragile in sim but must be measured
- writing a deployment runbook for a new robot
“跑序 = sim 风险从低到高, 最险的放最后 (依据 = 存活门/零指令存活) … ⑤ 是 sim 里最脆的一格 … 放最后跑, 全程留人扶, 起步即给 cmd, 零指令不做。… 任一段出问题就停在那一段, 不要跳到下一段。”
train/REAL_RUN_S2.md § 上机名单 / 全部命令 A stronger action_rate penalty cut the median torque demand under the gate and left the p99 at 4x the limit - only a hinge on the pre-clip (computed) torque, weighted by comparison with a peer term, collapsed the tail
tail-torque-needs-hinge-on-computed-demandJudge actuator demand against the deployed limit, read the pre-clip demand (applied torque is censored and gives no gradient on the excess), use an L2 rate penalty for the median and a thresholded hinge on computed demand for the tail, and set a new term's weight from its measured steady magnitude next to a peer term rather than from a back-of-envelope estimate.
Symptom
After R0.5 hip_pitch delivered torque sat at its 12 N*m limit in a typical get-up (demand 119-125% of the limit, p99 4.2x) - zero control margin at exactly the moment modelling error matters.
Context
The 12/17/11 N*m limits are deployment limits written into robot.yaml by set_torque (RS06 at 33% of rated), and simulation uses the same effort_limit - so the gate is judged against them, not the 36 N*m rating (an early reading against the rating was retracted). Applied torque is clipped at the limit - censored data - so demand must be read from computed_torque. With the full-range action contract (hip_pitch scale 1.309, kp 30) a single-step action change of 0.306 already saturates hip_pitch, and action_rate penalizes exactly that change.
Change
R3.0: action_rate_l2 -0.01 -> -0.03 (child-run). R3.1: new torque_headroom = sum relu(|tau_computed|/limit - 0.9)^2, normalized so three motor types share a scale. Its weight was first estimated at -0.1, measured in a 12-iteration run at an effective -0.019 (12x smaller - the estimate had mixed a per-episode-peak p99 with a per-step p99, and at 1% of upright it would have been numerically absent), and set to -0.5 so its steady value (-0.095) matched action_rate's (-0.097).
Outcome
R3.0: sum |da|^2 -64%, success 99.6 -> 100%, delivered median = demand median (the clamp no longer fired in a typical episode), gate PASS at worst 79.9% - but p99 unchanged (hip_pitch 419-432% -> 427-436%). R3.1: p99 hip_pitch -> 148-189% (-57 to -65%), knee 422-439% -> 233-234%, saturation duty -60%, success 100%; the worst joint became hip_roll at 67.7%. Its cost appears in torque-penalty-bought-by-leg-bracing.
Mechanism
A squared-rate penalty presses the whole-episode sum and moves the typical step, not rare spikes; the spikes came from the kp term (large targets while a limb is blocked by the ground - velocity alone could not reach them under vel_limit), and a penalty on applied torque cannot see demand above the clip because every excess sample reads as exactly the limit.
Applies when
- torque demand saturates actuator limits in high-effort skills
- a smoothness penalty improves medians but not peaks
- a new reward term's weight is set by estimate alone
“**必须用 `computed_torque` 而不是 `applied_torque`**:后者被 `effort_limit` 削平, 是删失数据,超限样本全被压成"恰好等于限",对超限部分梯度恒为 0。 … 改按同侪定标取 **−0.5**(稳态 ≈ −0.095,与 `action_rate_l2` 的 −0.097 等量)。”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §24 R3.1(torque_headroom 力矩需求越限罚) Add a single-point-suspension test to acceptance - the ground is a free stabilizer that hides divergence
suspension-probe-removes-free-stabilizerInclude at least one acceptance condition that strips the environment's free stabilization (suspension, or equivalent) - the sim-passing policy that fails on hardware is often failing a condition the battery never posed.
Symptom
walk_v5 looked healthy in every on-ground sim test yet diverged on the real robot - the acceptance battery had never measured a condition that would have revealed it.
Context
The battery gained a single-point-suspension probe (robot hung, feet free): measure torso tilt while the policy runs without ground contact. v5 scored 45.9 deg mean tilt suspended - wildly unstable - which the file calls "最灵敏的失稳探针(拿掉地面这个免费稳定器)": ground reaction forces passively stabilize a marginal policy, so on-ground metrics saturate long before the policy's internal balance is actually sound. v6 halved it (23.0 deg, target <10 deg) - progress visible on a scale where on-ground numbers showed nothing.
Change
Suspended-tilt added as a standing acceptance row; run under the honest contact parameters battery (accept_v2 with measured condim 4 / torsional friction 0.035), under which v5 correctly FAILS in agreement with the real robot.
Outcome
The sim battery's verdict on v5 flipped from pass to fail, matching hardware; suspended tilt became the discriminating metric between v5 and v6 (45.9 vs 23.0 deg) when ground metrics differed little.
Mechanism
Contact with the ground closes a stabilizing feedback loop the policy gets for free; removing it exposes the policy's own attitude control authority. A metric measured only in the assisted condition cannot rank policies by the unassisted quantity that hardware will actually demand during perturbations and flight phases.
Applies when
- sim acceptance passes but hardware diverges
- designing an acceptance battery for a legged robot
- two candidates tie on ground metrics
“单点吊那条是最灵敏的失稳探针(拿掉地面这个"免费稳定器"), v5 在地上一切正常却在真机发散, 就是因为验收从没测过这个工况。”
train/WALK_V6_MINIMAL.md § 5. 验收 Knee swing collapsed because it directly trades against the slip penalty - price the conflict explicitly and clamp what reward cannot hold
knee-swing-vs-slip-pricingWhen a behavior collapses as another metric improves, look for the term pair trading them and set their price ratio deliberately (with escalation and reverse tripwires pre-registered); where the policy actively spends action budget to undo your target, stop paying more reward and clamp the target space structurally.
Symptom
Knee peak-to-peak swing collapsed across generations - v5 33 deg, v10 26-30, v10b 7-8, v11 6.5-8.6 - and rolling the clock back did not recover it, acquitting the clock; the collapse tracked the gated slip penalty instead: "屈膝与不打滑在当前奖励里直接对抗" - v10b's excellent 93 deg slip was purchased with knee amplitude.
Context
Reward-side flexion fixes had failed three times: raising reference amplitude backfired twice (v9/v11), and v11's deep-squat default was actively fought by the policy - it spent 0.68 of action budget pulling the squat straight ("被策略花 0.68 动作拉直反杀"). v12's design accepted the conflict as real and attacked on two tracks: (1) ECONOMICS - a direct knee_swing_amplitude reward (+0.3, target 0.55 rad, capped at 0.6/step = 55% of tracking), explicitly opposed to the slip penalty by design ("显式对立——这正是设计:v12 就是这场对抗的定价实验"), with an escalation ladder (K +0.3 -> +0.5, then slip -0.5 -> -0.3, one layer at a time) and a reverse tripwire (slip telemetry back at v10 levels -> slip weight to -0.8, accept ~20 deg knee compromise); (2) STRUCTURE - knee target bounds [0.2, 0.9] rad so full straightening is physically impossible (straightest 11.5 deg) and the 0.68 fighting budget is released. A bonus falsifiable prediction was attached: phase-lock strength tracks amplitude (v9_probe 48 deg locked 2.5 Hz; v11 low-amplitude 1.36 Hz unlocked), so if K works, hardware phase-lock should return - one change, two verdicts.
Change
knee_swing_amplitude reward + knee target clamp + pre-registered escalation/reverse levers; the failed reward-side-only approach retired.
Outcome
The lineage was frozen before v12 trained (strategic reset), but the diagnosis stands as the walk line's clearest example of two reward terms trading a behavior between them, with the pricing experiment and structural clamp fully designed and calibrated.
Mechanism
When two terms price opposite aspects of one motion (swing amplitude creates yaw momentum that becomes slip), the optimizer settles wherever the price ratio puts it - patching one side moves the equilibrium, not the conflict. Explicit pricing makes the trade a designed quantity; structural clamps remove the regions where the policy spends budget fighting the designer.
Conflicts
The pricing experiment (K vs slip) was designed and calibrated but never trained - the 2026-08-05 reset suspended v12; the collapse attribution table and the 0.68-action counterattack are measured, the remedy's效果 is untested.
Applies when
- one gait quality degrades in lockstep with another's improvement
- the policy visibly fights a default pose or reference
- repeated reward-side fixes for the same behavior have failed
“膝摆塌在 v10→v10b,头号嫌疑是门控滑移罚(四代实测膝 p2p:v5 33° / v10 26~30° / v10b 7~8° / v11 6.5~8.6°;退时钟没救回 → 非时钟)——"屈膝"与"不打滑"在当前奖励里直接对抗 … 奖励侧修屈膝已三败 … v11 深蹲 default 被策略花 0.68 动作拉直反杀”
train/WALK_V12_SPEC.md § 0. 定位 / 2. K —— 膝摆经济(与滑移罚的对偶) An outer heading P-loop at deploy cut drift 10x because its output stays inside the trained command band - then training was aligned to it
deploy-heading-loop-and-align-trainingFix drift-class problems first with an outer loop whose output provably stays inside the trained command band; when adopting it permanently, align the training command generator to the deployment's actual command mixture (feedback-driven AND constant), matching law, gain, and clip exactly.
Symptom
Persistent heading drift on straight-line walking (v6 net yaw 60.3 deg over 15 s) that reward-side fixes had only partially tamed.
Context
The deploy stack added --heading: an external P loop wz = clip(0.5 * wrap_to_pi(theta0 - theta), +/-0.6), recomputed each frame and fed into the policy's ordinary wz command slot. Measured: net yaw walk_v6 60.3 -> 5.8 deg, walk_v5 17.4 -> 4.2 deg. A run-level audit later corrected the mechanism story: training had heading_command=False since v1 - the policy had NEVER seen heading-error feedback, so the loop works purely because its output lands inside the trained command distribution wz ~ U(+/-0.6): "收益真实,当时的机理解释写错了" (the benefit is real; the mechanism explanation had been wrong). v8 then closed the loop properly: training-side heading command enabled with rel_heading_envs=0.5 - half the envs get heading-error-driven wz, half get explicit constant wz, because deployment feeds wz BOTH ways (straight-line = heading feedback, turning = constant command) and rel=1.0 would have made constant-wz turning out-of-distribution. The law, gain, and clip were aligned item-by-item between trainer and deploy tool.
Change
Deploy-side outer loop first (no retrain needed); then v8-D enabled the matching training-side heading command at rel=0.5 with identical gain (0.5) and clip (+/-0.6), contract unchanged (wz slot carries the computed value).
Outcome
Drift handled at deploy (5.8 deg) generations before training caught up; the alignment removed the residual train/deploy distribution mismatch, with the accepted cost booked (open-loop straight walking becomes more OOD for heading-envs - irrelevant since acceptance and deployment always run the loop).
Mechanism
A learned velocity-tracking policy is a valid inner loop for any outer controller whose commands stay within the trained command distribution - the policy needs no knowledge of the outer objective. Full alignment then requires training on the same mixture of command sources the deployment actually uses, in the observed proportions.
Applies when
- heading/position drift on a velocity-tracking policy
- designing outer loops over learned locomotion controllers
- training command distribution differs from how deployment feeds commands
“审计更正(2026-08-02,run 级 env.yaml):训练侧自 v1 复盘起就是 heading_command=False … 策略从未见过航向误差反馈。--heading 是评估/部署侧外加的航向 P 环(wz=clip(0.5·err,±0.6), 落在训练分布 wz~U(±0.6) 内)。实测净偏航 walk_v6 60.3° → 5.8° … 收益真实,当时的机理解释写错了”
train/WALK_V7_SPEC.md § 0. 本轮之前已经改掉 (航向闭环, 含审计更正) Fix the task first, harden the plant second - DR budget spent on a dying task is wasted
task-shaping-before-plant-hardeningFreeze the task/command distribution before spending DR budget on plant robustness; if the task will still change, schedule plant hardening as a final pass and book the interim robustness gap explicitly.
Symptom
Tempting default ordering was to keep the plant-hardened (S2) lineage and teach it new commands; but the S2 plant adaptation had been earned on the straight-walk task, and the new omni tasks (sidewalk, in-place turn) use completely different contact patterns.
Context
The team had direct evidence that DR robustness is a budget that gets reallocated when the data distribution changes ("push/μ 两轮已实证 DR 预算有限且会被重分配") - robustness trained under one task/command distribution does not persist when training continues under another.
Change
Ladder order set to: first C (task shaping - add command modes until the task family is final), then a second S2 pass (plant hardening) on the C product. The plant-robustness gap this creates mid-ladder is accepted and booked explicitly ("此处不欠账" - the debt is assigned to the second S2 pass, not denied).
Outcome
The first S2 pass was not wasted: its laws (kd bandwidth <-> low mu, push need not be trained, ground mu need not be trained, bistability) let the second pass drop from five rungs to three. The C ladder itself ran on the softer plant band without incident.
Mechanism
DR robustness is carried by the policy's visited-state distribution; changing the task changes that distribution, so robustness bought under the old task partially dissolves. Hardening before the task is final means paying for robustness on states that will no longer be visited - "给一个即将不存在的任务花预算" (spending budget on a soon-to-not-exist task).
Applies when
- deciding ordering between skill/command expansion and DR hardening
- a hardened lineage is proposed as the root for a task change
- robustness regressions appear after adding new command modes
“S2 的 plant 适应是为直行步态调的，C4 侧走/C3 原地转是完全不同的接触模式，先硬化再改任务 = 给一个即将不存在的任务花预算（push/μ 两轮已实证 DR 预算有限且会被重分配）。故顺序改为 先 C（任务定型）→ 再 S2（plant 硬化）。”
train/C_LADDER_RUN.md § 0. 决策逻辑 = 短板可不可恢复 (末段) A 2-degree joint-zero calibration fix moved the whole runnable envelope - re-test old "cannot run" verdicts after recalibration
zero-offset-calibration-shifts-envelopeDate every hardware verdict with the calibration state; after any zero/mount recalibration, re-test previously condemned policy-power combinations and previously "unexplainable" posture offsets before attributing either to training or model.
Symptom
s1d was on record as "only runs at power 0.7" (kicked wildly at 0.8); after a calibration pass, the same policy ran 12 s at 0.8 with no kicking at all.
Context
The calibration had fixed a 2.08 deg zero offset on r_hip_roll - exactly the constant error source on the dominant joint of the kicking oscillation loop ("恰是乱踢振荡环主导关节的常值误差源"). The three-generation post-calibration hardware sweep also closed a second case: the robot's mysterious "backward lean" disappeared after calibration, and the sim-real posture difference collapsed from opposite-sign 5+ deg to same-sign ~2 deg ("后仰案实质了结") - the lean had been a sensing/zero artifact, not a mass-model error. Booked consequence: if the s1d recovery re-verifies, "真机可跑档整体 上移" - every policy's runnable power envelope shifts up, and downstream lineages' hardware expectations get revised.
Change
Joint-zero and mount calibration promoted from setup chore to a variable that dates hardware verdicts: verdicts about which power/scale levels a policy can run are conditioned on the calibration state they were measured under.
Outcome
One policy rehabilitated at a higher power level; one standing sim-real posture discrepancy closed without touching model or training; a pending re-verification booked rather than asserted.
Mechanism
A constant joint-zero error acts as a persistent disturbance injected at the feedback loop's most-loaded joint; near an oscillation threshold, removing a 2-degree bias is the difference between a stable and an unstable loop. Since the error is additive and machine-side, it shifts every policy's stability envelope simultaneously - which is why verdicts must carry their calibration date.
Conflicts
The s1d rehabilitation awaited one confirming re-run at the time of writing ("待复核一跑坐实") - the offset-as-cause reading is the head suspect, not a closed verdict.
Applies when
- a policy oscillates at a power level others tolerate
- sim and real disagree on a constant posture offset
- deciding whether to re-test old hardware verdicts after maintenance/calibration
“发现①:s1d@0.8 能跑了(旧账「只有 0.7 能跑」)——12s 无乱踢。头号嫌疑 = 标定修正:r_hip_roll offset 修 2.08°,恰是乱踢振荡环主导关节的常值误差源。… 发现②:「后仰」标定后消失 … sim-real 姿态差从反号 5°+ 收敛到同号 2°,后仰案实质了结。”
train/README.md § 真机 @0.8 三代横评(2026-08-07 标定后) Teleop fed the sidewalk axis a command beyond its training band - feet clipped; give each axis its own speed setting
teleop-command-band-per-axisGive every command axis its own teleop scale, clamped to that axis's training band, and reproduce any hardware incident in sim with the exact deployed command values before touching training.
Symptom
Robot stepped on its own foot when sidewalking left under teleop - and only when going left.
Context
The teleop tool used one speed setting for all axes: --teleop-speed 0.20 applied to A/D sent cmd_vy = 0.20, above the training band's top (0.08-0.18) where foot-spacing margin is thinnest. Sim reproduction of the incident (product policy, pw0.8, 5 seeds x 20 s, true collision threshold = single foot width 104 mm): at vy 0.20 the minimum foot distance was 111-115 mm - 7-11 mm from self-collision - vs 147 mm at vy 0.10. Left was 4x more dangerous than right (25% vs 6% of time inside the 160 mm soft wall at vy 0.10), matching the left-only symptom; the margin did not degrade over time (pressing more just lengthened exposure).
Change
deploy_policy gained --teleop-side (default 0.10), separating the lateral speed from the forward speed so each axis's teleop command sits inside its own trained band.
Outcome
Command now inside the band with 43 mm margin at default; the incident became a quantified, reproduced, closed account rather than a mystery.
Mechanism
The policy's competence envelope is the training command distribution per axis; teleop mappings that share one scalar across axes silently command out-of-band inputs on the weakest axis. Asymmetric risk (left vs right) came from the policy's own chirality bias, so a symmetric command produced an asymmetric hazard.
Applies when
- wiring a joystick/teleop layer over a learned policy
- a hardware incident occurs on one command direction only
- training bands differ across command axes
“A/D 一直与 W/S 共用速度档，所以按 A 下发的是 vy = 0.20 —— 既超训练带（0.08~0.18）上沿 … 0.20（遥控实际值）| 111~115 mm | 7~11 mm … 且左比右危险 4 倍 … 处置：deploy_policy 新增 --teleop-side（默认 0.10），侧移与前进档分开。”
train/C_LADDER_RUN.md § 3p. 一 向左走踩到自己 → --teleop-speed 0.20 同时喂给了 vy Drop the frozen policy into chosen configurations - a squat 2.7 cm lower than the stuck pose stood 52% of the time, the stuck W-sit 0%, and the interpolation between them showed a wall, not a slope
configuration-probe-wall-not-slopeWhen a policy is stuck, probe the frozen policy from a grid of hand-placed start configurations, including interpolations between the stuck state and a nearby state it escapes from; one read-only experiment separates height, torque, sampling and configuration and tells you whether to prevent entry or train the exit.
Symptom
After R0.3 the policy stood from 62% of starts and never from the W-sit it fell into; height, torque, missing samples and reward were all plausible suspects.
Context
A read-only probe placed the R0.3 policy directly into specified configurations. Squats (hip, knee, ankle) = (-.65,-1.3,-.65) stood 100%, (-1.0,-2.0,-1.0) 89.8%, (-1.2,-2.4,-1.2) at 0.176 m 52.3%; the measured W-sit at 0.203 m 0.0%; the account-(3) hand-over state (146 deg tilt) 34.4%; linear interpolations from the W-sit toward the squat at 25/50/75% stood 0.0/0.0/3.1%. The squat family's quasi-static torque is 16% of the limits, and the W-sit was visited ~9 s per episode in training. FK showed the squat family (-a,-2a,-a) keeps the torso vertical, the feet flat and the COM over the feet all the way from 0.146 m to 0.384 m.
Change
Height, torque and sampling were eliminated in one experiment; the next rungs targeted entering the W-sit (foot placement) instead of escaping it, and seeding the dead point itself was ruled out because it was already visited every episode.
Outcome
Pure configuration: the W-sit (hips externally rotated +/-47 deg, knees folded 110 deg, shins flat, feet beside the body) is a different place from the sagittal squat (feet flat under the COM). The policy's standing skill was bound to a narrow sagittal family, and the wall was confirmed by the interpolation. The foot-placement rungs that followed took prone from 0/159 to 158/159.
Mechanism
A learned skill covers the neighbourhood of the states it succeeded from; a start state outside that neighbourhood fails regardless of height or torque, and an interpolation that stays at zero until close to a working state shows the boundary is sharp.
Applies when
- a policy stalls in a specific posture and several causes are plausible
- deciding between reverse-curriculum seeding and entry-prevention shaping
- a feasibility account says a path exists but the policy does not take it
“**决定性对比:比死点矮 2.7 cm 的蹲姿站立 52.3%,死点 0.0%。** 所以不是高度、 不是力矩(蹲姿族准静态力矩膝 1.96/12、踝 1.24/17,只占 16%)、也不是训练采样 (死点每局被访问 ~9 s)。**是纯位形问题** … 插值实验进一步显示这**不是坡是墙** —— 走到 75% 仍只有 3.1%”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §15 死点位形实验(只读探针,同一个 R0.3 策略放进指定位形) Removing a hand trim re-exposed the plant offset it had been silently compensating - and a slope scan told bias from sensitivity
hand-trims-hide-plant-offsetsTreat hand-tuned trims as undocumented plant measurements: before deleting one, find what it compensates and re-house that knowledge in the model or the reward budget; diagnose posture errors with a sensitivity sweep to distinguish constant bias from gain problems.
Symptom
After switching from the old hand-trimmed default to the clean geometric zero, the retrained stand policy's only regression was torso lean: 1.8 deg -> 4.1 deg backward.
Context
The old default's ankle-pitch trim (-0.0489/+0.0628) had been pre-compensating a fore-aft COM mismatch; removing the trim removed the hidden compensation, and the posture reward alone was too weak to win it back. A COM sensitivity scan settled what kind of problem this was: sweeping base COM offset -50 to +50 mm gave nearly identical slopes for old and new policies (~0.026 deg/mm) - "不是质心敏感度问题, 是恒定偏置" (not a sensitivity problem, a constant bias). Fix landed in stand_v1b: posture corrected to +0.24 deg while keeping symmetry (<=0.1 deg) and low effort (0.259), disturbance rejection better than both predecessors. Model credibility was checked the honest way: v0's sim prediction at the real COM position (-22 mm) was -2.31 deg lean vs real measured 2.2-3.1 deg - "预测精准命中" - which is what licensed trusting v1b's -0.52 deg prediction. (Side flag from the same file: a sign convention had been documented wrongly in early comments - gravity_base[0] > 0 is forward lean.)
Change
Trims retired in favor of explicit modeling: symmetric geometric default plus a posture-reward budget sized to carry the real COM offset; the offset itself known (real COM ~22 mm behind model).
Outcome
stand_v1b passed acceptance as the standing lineage's final version; the walk-line requirement "加大躯干姿态惩罚权重" was upgraded from suggestion to mandatory, since walking amplifies what standing tolerates (real walk_v1 hit 26 deg lean vs sim 7.4).
Mechanism
Hand trims are plant knowledge stored in the wrong place - invisible, asymmetric, and stale after recalibration; removing them re-exposes the raw plant error. A sensitivity sweep separates the two possible diagnoses (slope change = control problem; parallel offset = constant plant bias), each with a different fix.
Applies when
- cleaning up hand-tuned offsets/trims in defaults or calibration
- a posture bias appears after a default or calibration change
- deciding whether a lean is a COM-sensitivity or constant-offset issue
“两者斜率几乎相同(≈0.026°/mm),v1 只是整体多后仰约 2.4° —— 不是质心敏感度问题,是恒定偏置。成因:旧 default 的踝俯仰 trim(−0.0489/+0.0628)本就预补偿了前后质心偏差,换成零位 default 后这份补偿没了 … v0 在真机质心处(−22 mm)的 sim 预测为 −2.31° 后仰,真机实测 2.2~3.1° 后仰 —— 预测精准命中。”
train/RETRAIN_v2.md § 4b. stand_v1 独立验证结果 / 4c. stand_v1b 验收结果 A joint frozen at the action clamp pays zero action_rate forever - penalize pre-clip saturation to make the cheat cost money
saturation-cheating-zero-rate-costWhenever actions are clipped and any smoothness/rate penalty exists, add a pre-clip saturation penalty so living at the clamp costs more than oscillating - and audit for frozen-at-clamp joints (action std ~0, |a| at exactly the clip value) as a standing acceptance row.
Symptom
With action_rate_l2 raised to -0.2, walk_v7's hip_pitch actions froze at exactly +/-1.000 (the clamp), reproduced bit-for-bit on hardware (splits frozen at +/-0.35 rad); the gait-shaping term joint_pos_ref collapsed to 0.026-0.035. The repo had died in the same trap once before (walk_v0: four joints pinned at +/-1.0).
Context
Mechanism: a joint pinned at the clamp has action-rate cost exactly zero and forever zero - under a strong smoothness tax, "push to the clamp and freeze" becomes the dominant optimum. Lowering the weight (-0.2 -> -0.1) only reduces temptation; the frozen state still costs nothing, so the structural fix adds action_saturation = sum(relu( |a_raw| - 0.9)) at weight -1.0, computed on the PRE-clip network output - post-clip, |a|=1.01 and |a|=3 punish identically and the out-of-range gradient dies (v0's old disease: mean |a| 1.71 soaked in saturation). Economics: freezing at |a|=1.0 now pays 0.1/joint/step (two hips = 40% of alive) vs ~0.0004/step for the healthy reference oscillation - the cheat flips from free to ~250x negative. Honest limits were recorded: A1 does not forbid freezing at 0.89 (the anti-freeze pressure must come from the oscillation demand of joint_pos_ref), and the alternative "rate on post-clip target" was rejected as 换汤不换药 - a pinned target also has zero rate.
Change
v8-A: add action_saturation (-1.0, thresh 0.9, pre-clip) AND halve action_rate_l2 (-0.2 -> -0.1, still 3.3x the v5 value); success criterion pre-declared (joint_pos_ref telemetry returns to v6 scale).
Outcome
Booked as the structural repair of the v7 freeze; also fixed a config hygiene trap discovered on the way - action_rate was assigned twice in __post_init__ (v5 comment line then v7 line), merged to one assignment "别再留两处赋值给下次审计埋雷".
Mechanism
Clipping creates a zero-gradient, zero-cost absorbing region in action space; any penalty on action derivatives makes that region strictly optimal once entered. Only a penalty on clamp proximity itself (measured pre-clip so depth of violation is visible) restores a slope out of the absorbing region.
Applies when
- joints sit at exactly the action clip with near-zero variance
- raising a smoothness penalty degrades gait amplitude
- shaped-oscillation terms collapse after a rate-weight increase
“钉死在钳位的关节 action_rate 代价精确为零且永远为零;−0.2 之下"推到钳位冻起来"成了压倒性最优 … 本仓第二次栽在同一坑(walk_v0 死于四关节钉死 ±1.0)。回调权重(−0.2→−0.1)只降低诱惑不消除作弊 … 算在 clip 前的原始网络输出上 … 作弊收支从"白赚"变成"倒贴 ~250 倍"。”
train/WALK_V8_SPEC.md § 1. 改动 A — 治饱和作弊 Before adding a command mode, compute what ignoring it costs - the lazy optimum must lose
reward-cost-of-ignoring-auditPrice the do-nothing policy for every new command or objective: compute reward-per-step for "comply" vs "ignore" from the actual table, and only train once ignoring is decisively unprofitable.
Symptom
A new command mode can be silently unlearnable if the reward table makes "ignore the command entirely" nearly free compared to the tracking reward available elsewhere.
Context
For each C rung the team computed the per-step cost of completely ignoring the new command versus ignoring forward: ignoring vx=0.25 costs 1.264/step; ignoring wz=0.20 costs 0.984/step (78% of forward - gradient sufficient, so C2 was certified "zero reward surgery"); but ignoring vy=0.10 cost only 0.020/step - 50-60x weaker, because vy entered the table only as an L2 tax, not a tracking term.
Change
Rule instituted: a rung may claim "no reward change needed" only after this arithmetic shows the ignore-cost is the same order as forward's. For C4 the audit failed, so track_lin_vel_y_exp (+2.0, std 0.15, same form as vx) was added - raising the ignore-cost at cmd_vy=0.10 from 0.020 to 0.718/step (36x).
Outcome
C1/C2/C3 proceeded with zero reward edits, keeping single-variable attribution clean; C4's needed surgery was identified before training instead of after a failed run.
Mechanism
PPO converges to whatever costs least; if the reward margin for obeying a new command is a rounding error against existing terms, the "ignore" policy is the optimum and no amount of training fixes it. The audit prices the lazy optimum explicitly before spending compute.
Applies when
- adding a command axis or task mode to an existing reward table
- a new skill trains flat while other skills stay healthy
- certifying a rung as "no reward change"
“cmd wz 0.20 → 0.984（coarse .473 + fine .491 + L2 .020）… 对照：忽略 vx=0.25 = 1.264（本级 78%，同量级）；忽略 vy=0.10 = 0.020（弱 50 倍——那才是 C4 必须加 track_lin_vel_y_exp 的原因）。本级不动奖励表。”
train/C_LADDER_RUN.md § 4. 原地转级（C2）② 奖励梯度已验够 A get-up policy righted itself and sat - three terms paid the seated pose 84% of the return, and the only shaping term that could tell sitting from standing was an exp kernel outputting 5e-5
seated-basin-dead-exp-kernelWhen a policy parks in a degenerate posture, tabulate what each reward term pays that posture against the target (watch contact terms that reward touching rather than bearing load) and evaluate every exp kernel at the error actually observed; a kernel narrower than the real error is switched off, and widening it is a one-variable repair that adds nothing new.
Symptom
R0 converged by iteration 700 and gained 1.7% over the next 2,300; success 0.0% in all four fall categories. Three of four success conditions passed (tilt median 1.0 deg, both feet in contact 99.6%, angular rate low); height passed 0.6% (median 0.204 m against 0.326). The robot knelt in a W-sit: hip yaw +/-47 deg, knees folded to 92% of the hard limit, shins flat, pelvis on the ground, torso vertical.
Context
Minimal reward table: upright (1-g_z)/2 +2.0, base_height linear progress +1.5, stand_pose exp(-||q-q_stand||^2/std^2) x upright gate +1.0 with std 1.0, still +0.5 and feet_on_ground +0.5 both x the upright gate, plus regularizers. The upright gate is a hinge that opens below 30 deg of tilt. The pre-registered fallbacks were then checked against the measured state: tightening the tilt gate was falsified (tilt was already 1.0 deg); a success bonus contradicted the spec's own no-cliff-bounty rule; narrowing the categories was useless (all four converged to the same pose); raising init noise was too weak for a basin this deep. Only a half-rise intermediate state addressed it, and a cheaper repair existed.
Change
R0.1 (user decision, single variable): stand_pose std 1.0 -> 3.0. Not a new term and not a bounty - repairing a declared term that was numerically dead. The two runs' logged env.yaml differ in log_dir and std only.
Outcome
R0.1 58.2% overall (R0 0.0%): supine 91.5%, side 82.2%, mid 55.9%, prone 0/156; knees fully straight; ||q-q_stand||^2 9.99 -> 0.91 and the stand_pose term 4.6e-5 -> 0.90; get-up ~1 s, no re-falls, the curve still rising at the 3,000-iteration cap. Prone stayed at zero and needed a different fix (see prone-dead-end-is-foot-placement).
Mechanism
Sitting earned upright 1.98/2.0, still 0.43/0.5 and feet_on_ground 0.46/0.5 - 3.0 of a 3.57 per-second return - because feet_on_ground asked for contact, not load. The only terms separating sitting from standing were base_height (+0.70/s for standing) and stand_pose, whose kernel at the real 9.99 rad^2 error (75% of it in the two knees) was exp(-9.99) = 4.6e-5 with a gradient near 1e-4. Standing up meant risking 3.0/s to gain 0.70/s while unfolding knees at 92% of their limit under load. With std 3 the same term is exp(-9.99/9) = 0.33 - a live gradient, three quarters of it on the folded knees.
Applies when
- a policy converges early to an upright but low, seated or kneeling pose
- a posture-matching exp term reads ~0 in the training logs
- contact-based rewards saturate while the task metric does not move
“**关键:`feet_on_ground` 只问"触地"不问"承重", 跪坐时双脚确实贴地,照样满分。** 三项 3.0/s = 总回报 3.57/s 的 84%。 … **exp(−9.99) = 4.6e-5** —— 权重 1.0 的项实际输出 5e-5、梯度 ~1e-4, **不是"还没学会",是数值上根本不存在**。 … **R0.1 决定(用户 2026-08-09 定,单变量)**:`stand_pose` 的 `std` **1.0 → 3.0**。 不是加新奖励、不是悬崖悬赏,而是**修复一个已声明但数值失效的项**”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §11 R0 首跑(recovery_r0, 2026-08-09):FAIL —— 翻正了但坐着 Measure yaw rate by integrating heading, not by averaging body-frame angular velocity - the two differed 15x
heading-integral-not-body-rateFor any secular rate (turn gain, drift), integrate the world-frame angle over the window; never average instantaneous body-frame rates during oscillatory motion - and when code comments warn about a measurement, believe them before re-measuring.
Symptom
Two measurements of the same turn gain disagreed by a factor of ~15: time-averaged body-frame omega_z gave -0.05 while the sim2sim harness's heading-angle integration gave +0.473.
Context
The harness code comment had already documented and predicted the failure: during gait the torso oscillates (body-frame omega_z std up to 0.7); projecting world angular velocity onto a swaying body axis and then averaging biases the estimate systematically - "实测体系均值 −0.04 而实际在以 +0.15 转" (measured body-frame mean -0.04 while actually turning at +0.15). The author's own -0.05 measurement was declared void and the training machine's 1.58/2.45 turn gains confirmed valid.
Change
Measurement doctrine fixed: yaw rate for evaluation = net heading change by integration over the window; instantaneous body-frame rates are unusable for averaged directional statistics during legged gait.
Outcome
Subsequent friction sweeps and turn-gain accounting were all conducted in the heading-integral currency, making cross-simulator comparisons (MuJoCo vs Isaac 1.04/1.02) meaningful.
Mechanism
Averaging a vector quantity expressed in an oscillating frame couples the frame's oscillation into the mean (a rectification bias); the heading integral is computed in the world frame where the gait oscillation integrates to ~zero, leaving the secular component.
Applies when
- measuring turn gain, heading drift, or any secular angular rate
- a body-frame-averaged statistic disagrees with trajectory-level truth
- writing evaluation code for oscillating platforms
“我用体坐标系 ωz 的时间均值测,得 −0.05;sim2sim 用航向角积分,得 +0.473。差 15 倍。… 步态中躯干摇晃(体系 ωz std 可达 0.7),把世界角速度投到摇摆的体轴上再取均值会系统性偏掉 … 结论:偏航率必须用航向积分,体系瞬时角速度取均值不可用。”
train/WALK_DIAGNOSIS.md § ③ 转向增益 —— 我的测法是错的,训练机的 1.58/2.45 成立 Multiple changes may share one rung only if their symptom spaces are orthogonal - with the ablation order written in advance
orthogonal-batch-with-ablation-orderBatch changes into one rung only when you can name each change's private symptom space in writing; pre-register the ablation order (numeric before structural) and per-change escalation plans, so a mixed outcome decomposes without new decisions.
Symptom
v8 needed four repairs at once (saturation cheating, landing impact, leg narrowing, heading alignment) - strict one-variable laddering would have cost four training cycles for wounds that were all already diagnosed.
Context
The batch was allowed because each change owns a disjoint symptom space, stated explicitly: "A→形态/饱和, B→落地/步态高度, C→腿距/roll 摇摆, D→偏航/转向" - so a single run can attribute each outcome to its change by which symptom moved. For the failure case, the ablation order was pre-registered (A2 -> A1 -> B -> D -> C, "先撤数 值改动" - retract numeric tweaks before structural ones), and every change carried its own escalation/rollback plan (e.g. A insufficient: joint_pos_ref 1.6->2.0 or widen the exp kernel; B overdone - robot afraid to land: v_ok 0.30->0.45; D unstable: rel 0.5->0.25, not back to 0).
Change
Four-change rung executed as one run with per-change symptom ownership, per-change contingency plans, and a pre-registered global ablation order for unattributable regressions.
Outcome
The rung retained single-run attributability without paying 4x training cost; the contingency table meant no failure mode would require improvising an ablation under pressure.
Mechanism
The one-variable rule exists to keep attribution possible, not as an end in itself; attribution survives batching exactly when the changes' observable effects are separable. Orthogonality is a claim that must be argued per pair in advance - and the pre-registered ablation order is the escape hatch for the case the claim fails.
Applies when
- several diagnosed fixes are queued and ladder time is scarce
- deciding between strict laddering and a combined rung
- a combined rung shows a regression no single change explains
“四个改动症状空间基本正交,可单 run 归因:A→形态/饱和,B→落地/步态高度,C→腿距/roll 摇摆,D→偏航/转向。出现无法归因的整体退化时消融顺序 A2→A1→B→D→C(先撤数值改动)。”
train/WALK_V8_SPEC.md § 8. 风险与归因 A torque-tail penalty was paid for by bracing the legs against each other - the second simulator's leg-contact count caught it, and the first explanation ("the trainer can't see self-collision") was retracted from the run's own config
torque-penalty-bought-by-leg-bracingWhen a penalty lowers a demand metric, look for what the policy traded to get there - keep self-contact frames and foot spacing as standing sim2sim readouts - and check any "the trainer cannot see X" explanation against the run's resolved config before it enters the record.
Symptom
After R3.1's torque_headroom term collapsed the demand tail, MuJoCo success fell 100 -> 98% and leg-leg contact frames at mu 1.0 rose 750 -> 2,190 (worst rollout 177 -> 450). The one failure (prone seed 2) had the legs crossed, one foot on the other leg, trapped at 0.067 m - visible on video.
Context
Across the ten prone seeds, foot spacing and leg-leg contact frames were monotonically anti-correlated, and the failure was the extreme of the series. Pulling the legs toward the midline shortens the hip_roll lever arm and lowers torque demand. At the time the spec explained it as Isaac training without self-collisions ("a free lunch in a simulator without self-collision").
Change
Leg-leg contact frames and foot spacing were tracked in every MuJoCo gate; R3.2's candidates were "train with self-collision on" or "a minimum leg spacing term" - not stacked.
Outcome
The next rung's joint-velocity penalty incidentally erased the dependency (2,190 -> 86 frames). On 08-10 the runs' logged env.yaml showed enabled_self_collisions true in both r3_1 and v2_2 (inherited from walk v10): the tangle was physically learned bracing, visible to both simulators, and the Isaac/MuJoCo contact-count gap was mesh and contact fidelity. The "self-collision debt" narrative was withdrawn for the whole line.
Mechanism
A penalty on demand rewards any configuration that lowers demand; legs pressed together act as a mutual support that fails when contact geometry shifts slightly.
Conflicts
§24 attributes the dependency to self-collisions being disabled in training; §36 retracts that from the runs' env.yaml ("§24's mechanism explanation was wrong") and keeps the older sections unedited as history.
Applies when
- a torque, impact or energy penalty improves its metric and cross-sim success drops
- legs or links approach each other after a regularization change
- an explanation relies on a simulator setting nobody checked in the run config
“prone 十个 seed 逐条看,脚距与腿-腿接触帧数单调反相关, 而唯一失败的那条正是最极端的一条 … 机制上说得通:把腿收到身体中线附近能缩短 `hip_roll` 力臂、降低力矩需求”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §24 代价:MuJoCo 成功率 100% → 98%,病因是两腿卡住 A reward on a quantity the actor cannot observe teaches "produce less of it", never "correct it" - closed-loop correction needs an outer loop
reward-observability-limitBefore adding a reward, check the actor can observe (or infer) the quantity: unobservable-error rewards buy only average suppression - route correction tasks to an outer loop whose commands stay in distribution, and do not break a frozen contract to add an observation a deploy-side loop can supply.
Symptom
Heading kept drifting despite world-frame yaw rewards, and a reviewer proposed heading-error rewards - raising the question of what yaw shaping can even teach this actor.
Context
The adopted architectural verdict: the actor's 45-dim base observation cannot see accumulated heading at all - projected_gravity is invariant to rotation about the gravity axis, and omega_z is a rate, not an angle. World-frame yaw-rate rewards are therefore privileged shaping that can only teach "少产生旋转" (generate less rotation), never "偏了以后拉回原线" (pull back to the line after drifting) - the policy cannot represent the error it would need to correct. The S1 gate (<=5 deg / 10 s) demands exactly the former, so the stack is right for its gate; active heading correction is assigned to the deployment outer loop (--heading P-loop converting heading error into in-distribution wz commands) plus small-wz training - and the 215-dim contract is explicitly NOT extended with a heading observation ("契约不加 heading 观测,冻结不动"). The reviewer's companion bias hypothesis was adjudicated with data: drift is bimodal - a basin mechanism decides whether you leave (seeds vary +/-16-46 deg vs -385 to -391 deg), and once out, rotation direction is constant (weight chirality; candidate root: the phase clock always swings left first).
Change
Yaw shaping kept as rate-tracking (three-layer stack); heading correction owned by the deploy outer loop; contract frozen; the "which behaviors need an outer loop" question settled by observability analysis rather than reward tuning.
Outcome
Stopped a contract change and a futile reward direction; drift work split correctly into rate-suppression (trainable) and error correction (outer loop), consistent with the earlier measured 10x drift reduction from the deploy-side loop.
Mechanism
A policy can only condition on its observation sigma-algebra; rewards on functions outside it shift the marginal action distribution (open-loop average effects) but cannot create feedback on the unobserved variable. Whether to add an observation, an outer loop, or accept average-shaping is decided by the task's gate: suppression gates need shaping, correction gates need the variable in some loop's view.
Applies when
- adding rewards on accumulated/世界-frame quantities (heading, position)
- deciding between a new observation, an outer loop, and shaping
- a drift symptom persists across reward-weight changes
“actor 的 45 维基座观测不到累计航向(projected_gravity 对绕重力轴旋转不变,ωz 是速率不是角度)——世界系 yaw 奖励是特权塑形,只能教「少产生旋转」,不能教「偏了以后拉回原线」。… 主动纠偏闭环 = S3 把小 wz 进分布 + deploy --heading 外环 … 215 契约不加 heading 观测,冻结不动。”
train/OMNI_V0_SPEC.md § 3. 评审④判决(2026-08-06,S1.3 开训前) Training-log reward values and fixed-command eval values live on different distributions - comparing them once claimed a 44% improvement that was really 6-10%
same-distribution-reward-comparisonQuote reward-term values only with their distribution attached (command range, DR on/off, environment), and compare across runs only when those match; re-measure in a common environment before claiming any improvement percentage.
Symptom
A v6-era analysis concluded slip had dropped 44% by comparing the training log's Episode_Reward against values calibrated in a fixed-command play environment; a same-condition re-measurement showed the true improvement was 6-10%.
Context
The training log's reward is an expectation over the training command distribution (vx 0.15-0.5, yaw +/-0.6, with pushes and domain randomization); play-environment calibrations are taken at a single fixed command with DR off. Subtracting one from the other compares apples to oranges - the warning was written into the v7 pre-flight: "奖励数值只能在同一指令分布下比较 … 拿它和固定 cmd 的 play 环境标定值相减会得出错误结论(v6 那轮已经栽过一次)".
Change
Rule adopted: any before/after reward-term comparison must hold the command distribution, DR state, and evaluation environment fixed; training-log values compare only against training-log values of runs with identical command/DR configs.
Outcome
The phantom 44% improvement was retracted; later term-level accounting (e.g. the C4 ignore-floor work) consistently specified its distribution before quoting numbers.
Mechanism
A reward term's expectation depends on the visited-state distribution as much as on the policy; changing the command distribution or DR moves every term's baseline. Cross-distribution differences therefore measure the distributions, not the policy change.
Applies when
- comparing reward telemetry across training runs or vs play evals
- claiming improvement percentages from training logs
- term-level reward accounting for diagnosis
“奖励数值只能在同一指令分布下比较。训练日志的 Episode_Reward 是在训练指令分布上算的(vx 0.15~0.5 / 偏航 ±0.6 / 带推力与域随机化), 拿它和固定 cmd 的 play 环境标定值相减会得出错误结论(v6 那轮已经栽过一次: 据此以为滑移降了 44%, 同条件对拍只有 6~10%)。”
train/WALK_V7_SPEC.md § 3. 开训自查 ⚠️ Real robot walked at half the sim clock for two generations - resolved by racing a reward-side and a plant-side evidence line, not by guessing
period-doubling-evidence-raceFor a hardware-only pathology, refuse to guess: pre-register one probe per side of the sim2real boundary (can the reward mechanism change it on hardware? can fitted plant parameters reproduce it in sim?) and let the first positive result direct the next version.
Symptom
The number-one sim2real gap: on hardware v6/v7 stepped at 1.23-1.32 Hz - almost exactly half the 2.50 Hz gait clock they were trained and simulated at; sim never reproduced it, two generations running.
Context
Instead of committing training budget to a guess, v8 pre-registered two mutually controlled evidence lines and kept the clock OUT of the training variables: (a) reward-side - if the v8 saturation fix revives joint_pos_ref (the term that pins the gait to the clock), re-run hardware and see whether frequency returns to 2.5 Hz (hypothesis: v7's frozen actions meant NO reward was pinning the gait to the clock, and the real plant - with armature and friction making high frequencies expensive - slid down to the leg's pendulum natural frequency ~1.1 Hz); (b) plant-side - record suspended joint data (fit_actuator), fit armature/friction, load the fitted values into sim2sim and see whether the 1.25 Hz reproduces IN SIM. Decision rule fixed in advance: "谁先给出阳性结果谁定 v9 的方向 (奖励侧 vs plant 侧)" - whichever line goes positive first sets the next version's direction.
Change
Period-doubling excluded from the v8 change set; both diagnostic lines scheduled in parallel as non-blocking work; frequency reported factually in acceptance with no pass/fail attached ("倍周期是否消失 不设判定,它是 §9 的关键证据").
Outcome
The gap was routed into a decisive-experiment structure rather than a speculative retrain; the plant-side line pointed at exactly the unmodeled armature/friction that were later measured and installed as the plant baseline. Resolution (era-2c full-plant retest): the family had TWO causes - v8's low-speed period-doubling vanished once measured armature+friction were installed (1.30 -> 2.50 Hz, bifurcation-edge machine sensitivity), while v7's stood untouched at 1.20 Hz (saturation-freeze-driven policy property) - both evidence lines paid off, one per case.
Mechanism
A behavior appearing only on hardware has candidate causes on both sides of the sim2real boundary; changing training to fix it tests only one side per expensive cycle. Two cheap parallel probes - one intervening on the reward mechanism, one making sim reproduce the real behavior - localize the cause to a side before any training money is spent, and sim-reproduction of a real pathology is itself the strongest form of plant validation.
Applies when
- a gait pathology appears on hardware but never in any simulator
- deciding whether a sim2real gap is reward-side or plant-side
- tempted to change the gait clock/reward to chase a hardware symptom
“倍周期(真机 1.23~1.32 Hz ≈ 时钟一半,v6/v7 连续两代;sim 从不出现):两条证据线互为对照——(a)… 真机重跑看频率是否回 2.5 Hz(假说:v7 没有任何奖励把步态钉在时钟上,真机 plant 有 armature/摩擦、高频贵,自由滑落到复摆自然频率 ~1.1 Hz);(b)真机吊挂录 fit_actuator.py … 看能否在仿真里复现 1.25 Hz。谁先给出阳性结果谁定 v9 的方向。”
train/WALK_V8_SPEC.md § 9. 平行线 (倍周期) Under continuous 3-axis uniform sampling, pure straight-line walking is a zero-measure event the policy never trained
zero-measure-commands-need-mode-samplingEnumerate the exact command points users will actually issue (straight, stop, in-place turn) and give each explicit probability mass via mode sampling with off-axes pinned to zero - never assume a continuous sampler covers its measure-zero subsets.
Symptom
"The robot drifts even in sim when told to walk straight" persisted across reward tunings - because with commands drawn as vx in [0.15,0.5] x vy ~ U(+/-0.2) x wz ~ U(+/-0.6), the event vy=0 AND wz=0 has probability zero: pure straight-line walking was never sampled even once.
Context
Restart evidence item #3: "纯直行是零测度点 … 'sim 里直行就漂'是分布的 必然,不是 reward 没调好" - the drift metric was legitimately drowned by commanded turning (v11's own comment self-documented this). The structural fix is discrete mode sampling: a custom ModeVelocityCommand that first draws a mode by share (stand/forward/back/turn/side/mixed), then draws values only on that mode's axes with all others pinned to exact zero - which is also what preserves single-variable discipline in the C ladder (native 3-axis uniform "采不出'离散模式桶' … 把 C1~C4 的单变量纪律直接毁掉"). The mixed mode later got an ellipsoid constraint rather than a cube for the same reason in reverse - corner combinations of a cube are unrepresentative extremes.
Change
Command generation moved from independent per-axis uniforms to mode-bucket sampling with pinned-zero off-axes (plus 20% rel_standing); acceptance likewise evaluates per mode.
Outcome
Straight-line behavior became a trained, testable mode instead of a measure-zero hope; the C ladder could add one mode per rung with provable isolation.
Mechanism
A policy optimizes expected reward under the command distribution; events of probability zero contribute nothing to the objective, so exact-zero-command behaviors (straight walk, stand, in-place turn) are only learned if the sampler gives them mass. Product-of-uniforms distributions concentrate mass on mixtures and give none to the pure behaviors users actually command.
Applies when
- a "simple" command (straight, stop) underperforms mixtures in sim
- designing command distributions for velocity-tracking tasks
- a ladder needs per-mode isolation for attribution
“纯直行是零测度点:最终 command 为 vx∈[0.15,0.5] × vy∈U(±0.2) × wz∈U(±0.6) 连续均匀,vy=0∧wz=0 从未被专门采样 —— "sim 里直行就漂"是分布的必然,不是 reward 没调好 … Isaac 原生 UniformVelocityCommand 是三轴各自 uniform,采不出"离散模式桶"”
train/OMNI_V0_SPEC.md § 0. 为什么从零 (3) / 三件前置 (1) Choose the fork root by which candidate's shortfalls are recoverable, not by headline score
fork-root-recoverable-shortfallWhen picking a checkpoint to fork from, rank candidates by whether their weaknesses are trainable-back, not by current headline metrics; prefer the candidate whose deficits the upcoming training directly pays for.
Symptom
Multiple candidate checkpoints for the omni-command ladder root, each best at something different: fric-3000 had the best tracking precision (vx 88-91%) and hardened plant robustness; s1e-500 had lower precision (vx 82%) but was the only candidate that could still walk backward.
Context
Root selection ran as a data probe, not a preference vote: 6 candidates x 8 out-of-distribution omni commands x 20 seeds = 960 cells (probe_omni_0808.json). s1e-500 @pw1.0 survived 20/20 in all eight conditions including backward at 67% tracking; the deep-trained fric lineage scored backward 0-3/20 despite better forward precision.
Change
Decision criterion made explicit: list what each candidate exclusively wins at, then ask which of those wins the loser could train back. fric-3000's exclusive wins (precision, plant robustness) are both retrainable - precision is directly optimized by the reward, plant hardening is a planned later pass. s1e-500's exclusive wins (backward plasticity 20/20 vs 2/20, disturbance margin 159/160 vs 125/160, push chirality symmetry 40/40 vs 17/40) had all been shown unrecoverable - push-level rungs failed twice, chirality never recovered even with mirror augmentation on. Root = s1e-500.
Outcome
s1e-500 carried the whole C ladder; its backward skill was preserved through C2/C4 gates (regress budget <=2/20 enforced), and the final C4 product passed a 260-cell battery at 20/20 everywhere.
Mechanism
Training can re-earn anything the objective directly pays for, but capabilities that earlier training destroyed and never restored (plasticity, symmetry, robustness margins) are empirically one-way doors. The information-bearing comparison is therefore recoverability of each candidate's deficit, which the team stated as "独占项的可恢复性正好相反 —— 这就是判据" (the exclusive items' recoverability is exactly opposite - that is the criterion).
Applies when
- selecting a resume/fork root among several checkpoints
- one candidate is more precise but another retains a skill the rest lost
- planning a task-extension ladder from an existing lineage
“fric-3000 赢在精度（vx 88~91%…）与 plant 鲁棒性 → 两样都训得回来…；s1e-500 赢在可塑性（C1 20/20 vs 2/20）、抗扰余量（159/160 vs 125/160）、手性对称（推 ±6 N·s 40/40 vs 17/40）→ 三样都训不回来 … 独占项的可恢复性正好相反 —— 这就是判据。”
train/C_LADDER_RUN.md § 0. 为什么根是 s1e-500（数据，不是偏好） The median of a bimodal metric lands in the empty gap - check the distribution, and never judge swing on 3 seeds
median-hides-bimodal-distributionBefore quoting a median or mean, look at the distribution; report suspected-bimodal metrics as mode share plus per-mode ranges, use small-seed smoke runs only to screen trends, and size the seed count for decisions by the share resolution you need (here: 20).
Symptom
Years of "high swing variance" and undecidable 3-seed swing readings turned out to be one fact: the metric was bimodal all along - "历代 swing 高方差与 3-seed 不可判由此定性:一直在测双稳态系统" - and every median reported from it (e.g. 12.1 mm) described a value no seed ever produced.
Context
Concrete instances: s2e_pd-1400's 20 seeds split 2.6-4.9 mm vs 19.3-24.0 mm with zero seeds between; s1e-500 read 3.9 mm on seeds 0-2 but 23.1 mm median over 20 seeds; a 3-seed reading of 19.3 was logged as "double-peak optimism, lesson recurrence #4". The selection re-audit codified the sampling rule: "3-seed 的 swing 读数不可判点, 只能筛带,选点必须 20-seed" - 3 seeds may screen a band, only 20 seeds may pick a point.
Change
Swing (and any suspected multi-modal metric) reported as mode shares plus per-mode ranges instead of a bare median; 3-seed smoke numbers demoted to band-screening; all shipping/selection decisions moved to 20-seed batteries.
Outcome
The "swing debt" bookkeeping was reinterpreted as basin probability (see swing-bistability-damping-switch), and checkpoint selection stopped being whipsawed by which basin the first three seeds happened to fall into.
Mechanism
Central-tendency statistics presuppose unimodality; on a bimodal distribution the median tracks the mode SHARE, not any achievable behavior, and small samples alias the share entirely. Mode-aware reporting (share + per-mode stats) is the only faithful summary, and the needed sample size is set by the share resolution required.
Applies when
- a quality metric shows chronic high variance across seeds
- 3-seed smoke readings contradict 20-seed batteries
- reporting swing height, clearance, or any basin-prone metric
“中位数落在空档里,「swing 债 −11mm」实为「50% 概率掉进拖地吸引子」。历代 swing 高方差与 3-seed 不可判由此定性:一直在测双稳态系统。… swing 跨 seed 双峰 (500 在 seed0~2 只读 3.9mm, 20-seed 中位 23.1) —— 3-seed 的 swing 读数不可判点, 只能筛带, 选点必须 20-seed。”
train/README.md § swing 双稳态定性 / s1e 选点重审 Every rung gets written stop criteria - hit any one, stop; tightened when priors say results should come fast
preregistered-stop-criteria-per-rungFreeze per-rung stop criteria (old-skill floors, new-skill deadline, oscillation signature, known pathology signatures) before training, stop on first hit - and shorten the deadline in proportion to how fast your mechanism says results should appear.
Symptom
Continued training past the point of degradation had previously destroyed capabilities (C1 trained away the root's backward skill); without hard stop rules, sunk-cost reasoning keeps runs alive too long.
Context
Standard rung protocol - eval_c_matrix every 100 iters at 5 seeds with a fixed criteria list, frozen before training ("开训前写死，事后不许改"): (1) stand or vx+0.15 at <=3/5 for two consecutive points; (2) vx+0.15 tracking <70% for two consecutive points (vs recorded root baseline); (3) oscillation signature - survival repeatedly crossing zero between adjacent checkpoints, stop on first occurrence, do not wait for confirmation; (4) new-skill-no-progress deadline (e.g. wz tracking <30% or still same-signed after iter 400); (5) a known lineage pathology signature (s1c arm-B: scatter -> half-recover -> collapse).
Change
Stop budgets scale with prior knowledge: when C4-redo4's feed-forward was already proven open-loop, the no-progress deadline was tightened from +500 to +100 iters ("前馈是开环就给 71~96% 的 … 若 +100 还没有 … 不值得再烧").
Outcome
Multiple rungs were stopped exactly on criterion (C4-redo criterion 4 at iter 1200; redo2/redo3 at absolute 900), converting each into a clean hypothesis test instead of a drifting run; no rung burned its full cap on a dead hypothesis.
Mechanism
Degradation of retained skills is a lineage-level injury that later training often cannot undo, so detection latency is capital loss; and a stop rule written before the run cannot be bent by hope. Tightening deadlines when priors predict immediate results converts "no result yet" into evidence against the mechanism.
Applies when
- starting any resumed/curriculum training rung
- deciding whether to keep training a run that shows early regression
- a mechanism-backed change should produce results immediately
“每 100 iter eval_c_matrix.py --seeds 5，命中任一即停 … 存活在相邻 checkpoint 间反复跨越 0（出现即停）… 收紧版：绝对 iter 900（= +200）时 vy±0.10 跟踪仍 <30% 即停”
train/C_LADDER_RUN.md § 3h. 预注册停梯判据（开训前写死，事后不许改） Push-test protocol - positive side first, fragile side spotted, axes aligned in the log, and cross-machine push counts stay qualitative
push-test-chirality-protocolOrder disturbance tests from the robust side to the fragile side with protection scaled to sim-measured asymmetry, align and log frame conventions before testing, and treat cross-domain disturbance counts as qualitative evidence only.
Symptom
Hand-push testing on hardware risked falls on a side sim had already flagged as fragile, and push counts invited apples-to-oranges comparison with sim numbers.
Context
Sim chirality was explicit: descendants were far more fragile in -y (fric-3000@kd1.2: +6 N*s survived 15/20 vs -6 N*s only 3-9/20) while the s1e control was perfectly symmetric (40/40). The protocol therefore: push the positive direction first, keep a spotter for the negative side; before any push, record which real-robot side corresponds to sim's +y in the log ("上机前对一次坐标"); and - citing the chaos lesson ("混沌课文") - real push results are used only as qualitative corroboration, never compared numerically with sim survival counts across machines.
Change
Push testing became a scripted, chirality-aware protocol with frame alignment as a logged precondition and an explicit epistemic limit on cross-domain count comparison.
Outcome
The fragile side was tested with protection informed by sim's quantified asymmetry; logs stayed interpretable because the frame correspondence was recorded before the first push.
Mechanism
Disturbance-response chirality is a real, quantifiable lineage property, so test order should follow measured fragility; and perturbation outcomes are chaotic in the details (divergent trajectories from tiny differences), so counts do not transfer across domains even when qualitative rankings do.
Applies when
- planning push/disturbance tests on hardware
- sim shows directional asymmetry in disturbance survival
- someone proposes comparing real push counts to sim counts
“先正向后负向, 负向留人扶 —— sim 手性明确: 后代在负 y 向显著更脆 (fric-3000 @kd1.2: +6 N·s 15/20 vs −6 N·s 3~9/20), 而 s1e@0.8 两向 40/40 完全对称。上机前对一次坐标 … 跨机不做二值结论 (混沌课文): 真机推力只作定性对照, 不与 sim 计数对比。”
train/REAL_RUN_S2.md § 3. 抗推 (可选, 人手推; 做则按此协议) Two machines, one configuration - every gain, offset and torque limit changes only in robot.yaml, whoever edits pushes at once, both checkouts show the same commit before the robot moves, and a pulled policy file is size-checked and synced before power-off
two-machine-config-disciplineTreat the robot's configuration as a versioned artifact with one source of truth, push every change immediately, verify identical commits on every machine before a hardware session, keep hardware limits in the repo and the firmware in sync in both directions, and verify transferred model files (size, digest) before running them.
Symptom
The robot's onboard computer runs the bridge and deploy scripts from its own checkout while training and analysis happen on other machines; a hot fix left on one side, or a half-written file, silently makes the robot run something other than what was evaluated.
Context
The operator runbook's "wall version" of the two-machine discipline: configuration changes only in robot.yaml (calibration offset/sign, gains, torque limits), committed and pushed from the Mac, pulled on the robot, bridge restarted; code is not edited on the robot, and if it is, it is committed and pushed on the spot - nothing unpushed overnight; 30 seconds before every real-robot session both checkouts must show a clean status and the same last commit hash; changing tau_max requires writing the motor's limit_torque too (and the reverse); re-zeroed motors require re-measuring offsets. The recovery line added: after pulling on the robot, check the ONNX is not zero bytes (a lesson from a corruption incident on 08-12) and sync before cutting power; the recovery and main lines are separate worktrees, each pulled with --ff-only.
Change
Operating rules, pinned on the wall and repeated in the hanging checklists ("git pull, both machines on the same commit").
Outcome
The sources record the rules and the incident that produced the size check; they do not record a count of sessions the rules caught.
Mechanism
A policy is evaluated against one configuration; any divergence between the machines, or a truncated file, turns a hardware result into a result about an unknown configuration.
Applies when
- a robot's onboard computer and a workstation both hold the configuration
- someone hot-fixes code or gains on the robot
- model files are copied or pulled to the robot before a session
“改配置只改 robot.yaml(标定 offset/sign、增益、限扭全在里面)→ Mac git commit + push → NX git pull → 重启桥。 … 谁改完谁立刻推,永远不留未推送的改动过夜。 … 每次上真机前 30 秒检查:两边 git status 干净、git log -1 哈希一致。 … 铁律不变:改 tau_max 必须同步写电机 limit_torque(反之亦然);电机重新标零后 offset 必须重测回填 yaml。”
RL系统/FOLLOW THIS copy 2.md § ② 双机维护纪律(贴墙版) Export every CAD part in the whole-machine frame so URDF rotations are zero and inertia is exact
urdf-shared-origin-exportGenerate the model so that correctness is structural: shared-origin STL export, zero rotations, subtraction-only origins, and an explicit 1e-9 g*mm^2 -> kg*m^2 conversion - never hand-rotate inertia tensors.
Symptom
Hand-assembled URDFs accumulate per-link rotation/origin errors and unit-conversion mistakes in inertia tensors - silent plant corruption that no later calibration can cleanly fix.
Context
Documented CAD -> URDF -> USD procedure from a successful Isaac Lab deployment, kept as the recipe if Lucen regenerates its model.
Change
(1) In CAD, align the whole robot to Z-up, X-forward (Isaac Lab convention) and ground the assembly; (2) export each STL with other parts hidden but the machine's shared origin kept, so all parts share one origin, every URDF rotation is 0, and inertia matrices equal CAD values directly; (3) units: Fusion 360 gives g*mm^2, URDF wants kg*m^2 - multiply by 1e-9; (4) link origin = negative of the joint position; link COM = CAD COM minus joint position; joint origin = difference of the two joint positions; (5) after URDF -> USD import, open the USD separately and set it instanceable before saving.
Outcome
A URDF whose rotations are all zero and whose inertia tensors are CAD-exact, eliminating an entire class of hand-transcription plant errors.
Mechanism
Keeping one shared origin turns every frame transform into a pure translation computable by subtraction, and leaves inertia tensors in the frame CAD already computed them in - no rotation of inertia tensors, the most error-prone manual step, is ever needed.
Applies when
- building or regenerating URDF/MJCF from CAD
- inertia or frame bugs suspected in the plant model
- importing URDF into Isaac Lab / USD
“导出 STL 时隐藏其他零件但导出整机——这样所有零件共享同一原点，URDF 里所有 rotation 全是 0，惯量矩阵直接等于 CAD 值 / 单位：Fusion 360 给 g·mm²，URDF 要 kg·m²，乘 1e-9 / link origin = 该关节坐标取负 … URDF → USD 导入后必须单独打开 USD 设成 instanceable 再存”
Experience.md § URDF 制作流程 (lines 87-92) Isaac splits Coulomb friction into static and dynamic columns - wiring only static means zero loss during motion, silently discarding the identified value
sim-api-friction-columnsWhen installing identified actuator parameters, map each measured quantity to the simulator's exact API column for the operative regime (dynamic for moving loss, viscous for damping), verify per joint after landing, and audit how randomization intervals fall on each column's nominal.
Symptom
The hardware-identified Coulomb friction (tau_c) was about to be installed into the trainer through the friction= field alone - which in Isaac 5 populates only STATIC friction, so during motion the joints would lose no torque at all: "只给 static 则运动中不损耗, 辨识的 τ_c 走路时等于没接" (the identified tau_c would effectively not be connected while walking).
Context
The v12 integration wired all three columns deliberately: armature= and friction= from the 2026-08-04 hardware identification, PLUS dynamic_friction= (Isaac 5 splits Coulomb into static/dynamic; the moving-loss column is dynamic) and viscous_friction= (= the measured joint damping 0.02, aligned to MJCF's damping). Each value was re-checked per joint after landing. A DR interaction was audited and booked rather than hidden: randomize_joint_parameters jitters ALL friction columns with ONE interval - the [-0.05, +0.10] band was calibrated against the Coulomb nominal, and landing on the viscous nominal 0.02 it becomes [0, 0.12], "偏宽但保守" (wide but conservative), accepted with the note that pre-viscous behavior was already [0, 0.10] on a base of 0.
Change
Measured actuator parameters installed across all applicable API columns (armature, static, dynamic, viscous), with the DR side effect on shared randomization intervals audited and recorded.
Outcome
The first generation where the identified plant actually acts during motion in the trainer; the silent-column failure mode documented before it cost a training run.
Mechanism
Physics engines decompose "friction" differently (single coefficient vs static/dynamic/viscous columns); a measured parameter is only installed when it reaches the column the solver reads in the regime that matters (motion, not stiction). Randomizers that share one interval across columns rescale the band by each column's nominal - a hidden unit change.
Applies when
- installing identified friction/armature into any trainer
- porting plant parameters between simulators or engine versions
- joint losses in sim do not match bench measurements during motion
“并额外传 dynamic_friction=(Isaac 5 把库仑拆 static/dynamic 两列,只给 static 则运动中不损耗,辨识的 τ_c 走路时等于没接)与 viscous_friction=(= joint_damping 0.02,对齐 MJCF damping)。… randomize_joint_parameters 用同一个 friction 区间抖三列, [-0.05,+0.10] 是按库仑标称标的,落到粘滞标称 0.02 上成了 [0,0.12]”
train/WALK_V12_SPEC.md § 7. 核查单 (Isaac 接 V.ACTUATORS 新字段) Compare the achieved reward to the computed ignore-floor to tell "never learned" from "learned but unprofitable"
ignore-floor-diagnosisFor any skill that trains flat, compute the reward the null policy would earn on that term; achieved==floor means the behavior never paid out (find why: exploration, reward observability, or feasibility) - do not tune weights first.
Symptom
C4 sidewalk failed on both arms; the question was whether the policy had found sidewalk and rejected it as unprofitable, or never found it at all - two diagnoses with opposite fixes.
Context
The theoretical value of the sidewalk tracking term for a policy that completely ignores the command was computable from the command distribution: 0.189. Trained final values landed at 0.187 (arm A) and 0.204 (arm B) - sitting exactly on the ignore-floor - while the honest balance at the optimum actually favored sidewalking (net +0.88/step inside the side bucket). Later the same arithmetic closed the whole saga: for the true reward landscape, doing real sidewalk scored 0.153 vs 0.944 for ignoring - the policy's refusal "是理性最优，不是探索失败" (rational optimum, not exploration failure) under one hypothesis, and under the final measurement-corrected account the policy had "每一次都在 做理性选择" (made the rational choice every time).
Change
Diagnostic rule adopted: compute the ignore-floor for the new term; if the achieved value sits on it, the behavior was never expressed in useful volume (or the reward cannot distinguish it - check both); if the achieved value is above floor but the behavior is absent at deployment, the policy sampled it and priced it out - then the reward balance, not exploration, is the lever.
Outcome
Correctly identified that PPO had not merely under-valued sidewalk; each subsequent hypothesis (waveform sign, regularization cage, exploration form, reward kernel) was tested against this floor arithmetic, which kept the search honest through three reversals.
Mechanism
Every reward term has a computable value under the null behavior; the achieved-vs-floor gap is a one-number audit of whether the optimizer ever monetized the target behavior. It converts "training failed" into one of two mechanistically distinct states with different fixes.
Applies when
- a new skill's tracking reward plateaus early
- deciding between exploration fixes and reward-weight fixes
- post-mortem of a failed curriculum rung
“track_lin_vel_y_exp 训练终值恰好坐在「完全无视指令」的底分上（A 0.187 / B 0.204，理论值 0.189），而终点 balance 明明有利（side 桶内净 +0.88/步）。不是学会了不划算，是根本没学到。”
train/C_LADDER_RUN.md § 3e. 为什么首战 FAIL Model CAN polling skew - joint observations are 6-9 ms stale by read order
can-timing-skew-modelingIf joints are read sequentially over a shared bus, reproduce the per-group observation staleness in sim (or randomize it over the measured range) - synchronous observations are a privileged fiction.
Symptom
Policies trained with synchronous joint observations degrade on hardware where motors are polled sequentially over CAN - hip data is already 6-9 ms old by the time ankle data arrives.
Context
Menlo's core sim2real finding on a leg platform of almost identical mass to Lucen's. CAN is a sequential bus: one poll cycle reads motors in a fixed order, so the observation vector mixes timestamps. Lucen runs 6:6 motors on a dual CAN split, so the problem transfers one-to-one.
Change
Explicitly model CAN timing skew in sim: give the joint groups different observation delays matching physical read order. Menlo went further - running real firmware in the loop with a motor simulator between MuJoCo and firmware injecting 0.4-2 ms uniformly distributed delay.
Outcome
Reported by the reference team as their core sim2real enabler on a same-scale platform; recorded in Lucen's experience log as directly applicable ("这个问题一模一样").
Mechanism
A policy exploits any cross-joint temporal coherence present in training observations; when hardware breaks that coherence per bus position, the learned feedback acts on inconsistent state estimates, injecting phase error exactly at the control bandwidth.
Conflicts
Second-hand episode: outcome numbers are the reference team's report, not a Lucen-run experiment; Lucen adopted the requirement but the corpus has no Lucen A/B of skew-on vs skew-off.
Applies when
- robot polls actuators sequentially over CAN/RS485 or similar shared bus
- sim2real degradation appears as jitter or oscillation not seen in sim
- designing the observation/delay model before a training run
“电机走 CAN 是顺序轮询的，髋部电机的数据到踝部电机上报时已经陈旧了 6-9 ms，他们直接在仿真里显式建模了 CAN 时序偏斜，按读取顺序给三组关节不同的观测延迟。… 注入 0.4–2 ms 的均匀分布延迟。你们是 6:6 双 CAN 分总线，这个问题一模一样”
Experience.md § 执行器 + 时序建模 (line 6) Freeze the deployment contract, stamp every export, and let an automated checker catch wiring bugs
contract-freeze-and-checkerFreeze and fingerprint the policy I/O contract; ship contract changes as new versioned profiles that leave old artifacts bit-identical; and extend the automated contract checker with every pipeline change, forcing the new path to execute in the check.
Symptom
Contract-level changes (observation layout, action pipeline) are where silent sim/real divergence is born; two real wiring bugs appeared the one time the action pipeline was extended.
Context
The 215-dim observation contract was frozen ("纪元 3，三机 digest" - an era number plus a digest agreed across three machines); proposals that would break it (e.g. a GRU memory) were rejected on contract grounds. Every exported ONNX is stamped and verified with a manifest (onnx_manifest --stamp / --verify), and deployment refuses mismatched combinations. When C4 added the lateral feed-forward, it went in as a NEW profile (omni_ff) leaving the existing omni profile's behavior bit-identical; the checker (check_contract) was extended to force the feed-forward path to actually execute (cmd_vy=0.13) and promptly caught two genuine bugs: (1) re-clamping with soft_joint_pos_limits after the feed-forward (0.23 rad deviation) instead of reusing the parent's clip; (2) indexing processed actions by asset.joint_names instead of the action term's own contract-ordered _joint_names, which landed the feed-forward on the wrong joints (l_hip_yaw / r_ankle_pitch).
Change
Contract discipline as implemented: frozen dims + digest; manifest stamping and refusal; contract changes only via new versioned profiles; checker updated in the same commit as any pipeline change, with inputs chosen so new code paths are exercised.
Outcome
Both wiring bugs caught before any training or deployment ("两个都是 check_contract 当场抓出来的 —— 这次它值回票价"); old deployments provably unaffected by the new profile.
Mechanism
The contract is the only interface the policy and robot share; freezing plus fingerprinting makes divergence detectable, and an executable checker turns "the contract holds" from a belief into a test - but only if its inputs actually drive the new code path.
Applies when
- modifying the action or observation pipeline of a deployed policy
- exporting policies for hardware
- proposals that would change observation dims or history structure
“契约校验抓到的两个真错误（记账，别再犯）：1. 前馈后误用 soft_joint_pos_limits（URDF 限位 ×0.9）重钳 → 0.23 rad 偏差 … 2. 用 asset.joint_names 索引 _processed_actions → 前馈落到 l_hip_yaw/r_ankle_pitch 上 … 两个都是 check_contract 当场抓出来的 —— 这次它值回票价。”
train/C_LADDER_RUN.md § 3j. 契约级改动 / 契约校验抓到的两个真错误 A curriculum ramp keyed to the process step counter re-fires on every resume - and shipped policies never saw the penalty
curriculum-counter-lineage-stepsKey every curriculum/ramp schedule to lineage-cumulative progress, not per-process counters; and audit where your shipped checkpoints sit relative to every ramp - a penalty that no product ever experienced is not part of your training.
Symptom
vx+0.30 died at a fixed relative time in every resumed run: resume at 500 -> slide at 1100, zero at 1300; resume at 700 -> slide at 1300, zero at 1500 - absolute depths offset by exactly the resume offset, relative timetable identical.
Context
ramp_reward_weight (the saturation penalty ramp) read env.common_step_counter, which restarts at 0 for every run including --resume. So start_step=600 meant "600 iters after THIS resume", not "lineage iteration 600". The A/B arm pair was the clean proof: their env.yaml differed only in log_dir, only resume point distinguished them, and the omni CurriculumManager had exactly one active term - nothing else could produce that timetable. Second consequence: every shipped checkpoint (s1e-500 at +500, C2-700 at +200, A800 at +100) was selected before its run's +600, so the saturation penalty weight was 0.000 for every product ever shipped - explaining saturation 33% and raw |action| 1.9 against clip 1.0 (hip_roll in bang-bang), i.e. half the heat budget.
Change
Two independent recommendations recorded: (1) make the ramp count lineage steps (add the checkpoint's iteration offset on resume) or pin terminal weights in downstream rungs instead of ramping; (2) give the saturation penalty its own rung - never mixed into a skill-learning rung (that would be two variables again).
Outcome
Explained the recurring +600 death of the highest-amplitude command and the persistent actuator saturation of all shipped products with one root cause; honest caveat booked (at +800 the weight is only -0.086, small, but vx+0.30 is the command demanding the largest action amplitude, so it is squeezed first).
Mechanism
Resumable training splits "the lineage" from "the process"; any schedule keyed to process-local counters silently re-applies its transient to every descendant run, and any product-selection habit that picks checkpoints early systematically samples the pre-ramp regime - the curriculum exists in the config but never in any shipped policy.
Applies when
- resumed/forked training with any scheduled reward or DR ramp
- a metric dies at a fixed offset after each resume
- shipped policies show behavior a late-schedule penalty should prevent
“ramp_reward_weight 读的是 env.common_step_counter，它每个 run 从 0 开始，--resume 也不例外。… 原始 run / 臂B | 500 | 1100 = +600 | 1300 = +800；臂A | 700 | 1300 = +600 | 1500 = +800 … 所有出品其实从没见过饱和罚。… 这解释了 sat_max_pct 33%、raw |a| 最大 1.9（clip 是 1.0）—— hip_roll 一直在 bang-bang，而罚它的那一项权重恒 0。热账的一半在这里。”
train/C_LADDER_RUN.md § 3g. 系统性问题：saturation_ramp 每次 resume 归零 An edge-triggered landing penalty missed the tail and fired after the harm - penalize overspeed continuously inside the contact window
penalize-tail-before-touchdownPenalties aimed at impact/violation events must (a) price the excess over a threshold, not the mean, and (b) be active on the approach (state-gated window), not triggered by the event - check your control rate can even see the event you are penalizing.
Symptom
The v7 landing penalty (vz^2 on the contact-force rising edge, weight -10) did not bite: landing-velocity 95th percentile stayed at 2.61 m/s against a 0.3 target.
Context
Two structural faults were identified: (1) it penalized the MEAN over sparse events - many soft landings dilute the occasional violent slam, while the damage (GRF peaks, motor peak load) lives in the tail; (2) it fired AFTER touchdown - at 50 Hz evaluation the rising edge is aliased by physics decimation, so the read vz is often the already-decelerated post-impact value: underestimated, and with no shaping gradient before contact. Replacement: continuous penalty while the sole is inside a height gate (h < 0.03 m): relu(-vz - 0.30) - only the excess over an allowed approach speed is penalized (tail only), and gradient exists for several frames BEFORE touchdown. The sole-height computation again subtracts the 0.0585 m link offset ("WALK_DIAGNOSIS 坑#1, 别再踩"); the edge-triggered version was kept as a diagnostic only.
Change
feet_landing_vel reformulated: edge-event vz^2 -> in-window relu(-vz - v_ok) with v_ok 0.30 (conservative vs the sqrt(L)-scaled human value ~0.19, to be tightened after passing), h_gate 0.03, weight unchanged -10.
Outcome
The failure analysis of the first form was written before the second was trained; the v_ok escalation path (0.30 -> 0.45 if the robot becomes afraid to land) was pre-registered in the risk table.
Mechanism
Sparse-event mean penalties optimize the average case while the constraint is a quantile; and any penalty evaluated only at/after a discrete event gives the optimizer no gradient along the approach trajectory that determines the event. A state-gated continuous excess penalty fixes both: it prices only violations and shapes the approach.
Applies when
- impact/landing penalties fail to move tail percentiles
- a penalty is triggered by contact edges at a coarse control rate
- designing constraint-style penalties for rare violent events
“罚的是均值路径:上升沿是稀疏事件 … 大量软着陆稀释偶发猛砸;而伤害在尾部 … 罚在触地后:50 Hz 评一次,上升沿被物理 decimation 混叠,读到的 vz 常是撞完已减速的值——既低估,又没有触地前的塑形梯度。”
train/WALK_V8_SPEC.md § 2. 改动 B — 落地惩罚改罚尾部、罚在触地前 mj_objectVelocity returns inertial-principal-axis frame - one API assumption poisoned eval and observations for a whole line
body-frame-velocity-api-auditVerify every frame-sensitive API against a hand-computed truth (rotate raw qvel yourself, or command a known world velocity and check where it lands) before trusting any evaluation or observation built on it - especially when a model's inertial frame is rotated from its body frame.
Symptom
Sidewalk vy read ~0 under every condition; separately, whole-policy performance was mysteriously mediocre in sim2sim while training-side numbers looked fine. Four training rungs were declared FAIL partly on these readings.
Context
base_link's URDF inertial frame is rotated 90 deg about x relative to the body frame (iquat = [0.7071, 0.7071, 0, 0]). mj_objectVelocity(flg_local=1) rotates into ximat - the inertial principal-axis frame - not the body frame, and returns center-of-mass point velocity, not body-origin velocity. Consequences measured: the "vy" column was actually vertical velocity vz (walking at cmd 0.25: old reading +0.0093 vs true -0.0424); the angular velocity fed to the policy in sim2sim was [wx, wz, -wy] - a different quantity than Isaac and the real IMU provide. RMS check over 8 s of walking: y/z axes swapped between v6[:3] and the qvel truth.
Change
Fixed sim2sim and both probes to compute ang_b = qvel[3:6] and lin_b = xmat.T @ qvel[0:3] (identical quantity to Isaac's root_ang_vel_b / root_lin_vel_b), with a standalone reproduction script (frame_bug_repro_0809.py).
Outcome
Re-scoring the "failed" C4 lineage under correct coordinates reversed the verdicts: c4r4 checkpoints showed vy 80-126% tracking (old reading: +/-2%) and vx+0.30 at 91-95% where the old metric said 0/5 - the bad frame both mis-measured vy and, via corrupted policy observations, systematically depressed all measured performance. Final product passed 260/260 cells.
Mechanism
A simulator API's frame convention is part of the observation contract; when the model's inertial frame is rotated relative to the body frame, frame-agnostic use of a "local" velocity silently permutes axes. Feeding a policy an axis-permuted angular velocity is an observation corruption that degrades behavior everywhere, not just on the axis being studied.
Applies when
- building or auditing a cross-simulator evaluation harness
- one measured axis reads near-zero under all conditions
- sim2sim scores are inexplicably worse than training-side metrics
- URDF/MJCF inertial frames are rotated relative to body frames
“base_link 的 iquat = [0.7071, 0.7071, 0, 0] … mj_objectVelocity 用的是这个 … 喂给策略的 base_ang_vel 是 [wx, wz, −wy] —— MuJoCo 侧观测与 Isaac / 真机 IMU 不是同一个量；vy_mean 报的是竖直速度 vz —— 前进 cmd 0.25 时旧读数 +0.0093，真值 −0.0424。”
train/C_LADDER_RUN.md § 3l. ⚠️ mj_objectVelocity 读的是惯性主轴系 / 3m. 一 bug 坐实 Borrow reward values from other robots as ratios (to tracking weight, to leg length) - never as absolute numbers
transfer-ratios-not-absolutesWhen importing any numeric from another robot's config or paper, identify its natural normalizer (tracking weight, leg length, sqrt(g*L), body mass) and transfer the dimensionless ratio; sanity-check against a same-scale robot when one exists.
Symptom
Published configs offered tempting absolute values (swing height target 0.06-0.08 m, weight -20) that would have been wrong for a robot with half the leg length and a different tracking weight.
Context
The cross-check normalized before transferring: G1's feet_swing_height weight -20 against tracking +1.0 is a 20x ratio, so with local tracking at 1.5 the equivalent is -30, not -20. G1's 0.06 m target on a ~0.70 m leg scales to ~28 mm on the local 0.325 m leg (Humanoid-Gym converts to ~23 mm), confirming the locally chosen 0.03 m and explicitly rejecting copying 0.05-0.08 absolutes. A same-class robot (Menlo's 16 kg) was used to sanity-check feet_air_time (+0.5 vs the local 2.0, flagged over-high). A nondimensional check of the same kind later validated the sidewalk speed target (v/sqrt(gL) = 0.081 vs hardware-verified 0.101 - 0.104 - inside the envelope, conservative).
Change
All borrowed values converted through ratios (weight/tracking-weight, height/leg-length, dimensionless speed) before entering the config.
Outcome
The scaled values worked (0.03 m target matched both the scaling law and measured 22-23 mm baseline); no cross-robot absolute was ever copied raw.
Mechanism
Reward economies are scale-relative (only ratios to the tracking term matter to the optimum) and kinematic quantities are morphology-relative (clearance scales with leg length, speed with sqrt(g*L)); absolutes encode the source robot's scale, ratios encode the design intent.
Applies when
- copying reward weights/targets from open-source configs or papers
- setting clearance heights, speed targets, or impact thresholds
- comparing your weights to published tables
“G1 的 feet_swing_height 是 tracking 的 20 倍(−20 vs +1.0)。我们 tracking 是 1.5,按同比例应为 −30 … G1 目标 0.06 m / 腿长 ~0.70 m,换算到我们 0.325 m 腿长约 28 mm;Humanoid-Gym 换算约 23 mm。故 target 取 0.03 m 是对的 … 不必抄 0.05~0.08 的绝对值。”
train/WALK_DIAGNOSIS.md § 修正 ②(权重放大) / 修正 ③(目标高度按腿长缩放) Record where every failed episode ends - an end-state confusion matrix showed all failures finishing seated and overturned a "cannot roll over" diagnosis that per-category success rates hide by construction
end-state-confusion-matrixFor any multi-category acceptance, report where each failed episode ends, not only which category it started in; it costs a few lines and no extra simulation, and it separates "cannot reach the goal" from "reaches the wrong basin".
Symptom
Prone scored 0% for three generations; the working diagnosis was "prone lacks the roll-over skill", and R0.3 spent a run adding prone-to-side roll-arc start states. It bought nothing: the 45-deg roll band itself only moved from 24.2% to 26.6% after 3,000 iterations.
Context
Acceptance reported success per starting category. A final-state table (lying prone / on the side / supine / seated / standing for every failed episode) was added to accept_recovery.py at R0.3.
Change
The confusion matrix became a permanent part of the acceptance output, and the prone diagnosis was rewritten from it.
Outcome
The prone, side and supine columns were all zero - every failure ended seated - and prone had righted its torso in 159/159 episodes (tilt under 30 deg in 100%). The missing ability was standing up from one specific seated configuration, not rolling over, which redirected the next rungs to foot placement and to a configuration probe.
Mechanism
Per-category success rates collapse "reached the wrong basin" and "never reached anything" into the same zero; the end state separates them.
Applies when
- a category sits at 0% and the diagnosis rests on its label
- recovery, manipulation or navigation tasks with distinct terminal states
- an intervention aimed at the presumed cause shows no effect
“**① 末态混淆矩阵 —— 固化(已在 `accept_recovery.py`)。** 它给出的 "趴/侧躺/仰躺三列全 0、所有失败都终于坐姿"是本线最改变决策的一个事实, 而**逐类成功率按构造看不见它**。 … 成本十来行、零额外仿真。 … **② prone 病因更正(旧诊断作废)。** 旧:"缺翻身"。新:**prone 159/159 全部 把躯干翻正**”
git:Lucen-recovery@origin/recovery:train/RECOVERY_V0_SPEC.md § §15 R0.3 判决 + 三件事的判断 A nonzero response with the same sign for + and - commands is bias, not ability
same-sign-response-is-yaw-biasBefore crediting any directional skill, test both command signs: response must flip sign with the command; a same-signed pair is a bias to subtract, not an ability to report.
Symptom
Root-selection probe showed nonzero wz "tracking percentages" on turn commands, tempting the read that candidates could partially turn.
Context
During C-ladder root selection, s1e-500's measured yaw rate was +0.084 rad/s for cmd +0.3 and +0.093 rad/s for cmd -0.3 - same sign both ways. The same check on the C2 baseline gave wz+0.20 -> -0.13 and wz-0.20 -> +0.12 (again same sign), while the alternative root s2e_pd-1400 gave +0.16 / -0.16 - opposite signs, i.e. a genuine 16% command response.
Change
Reading corrected and written into the execution sheet: percentages on directional commands are meaningless unless the +cmd and -cmd responses have opposite signs; all three candidates were re-classified as "cannot turn, cannot sidewalk - C2/C3/C4 learn from zero". Acceptance criteria thereafter required "tracking >=50% AND left/right opposite-signed".
Outcome
Prevented crediting turn/sidewalk ability that did not exist; the antisymmetry clause became a standing part of every turn and sidewalk PASS condition (C2, C4, C4-redo levels all carry "且左右反号").
Mechanism
A constant yaw (or lateral) bias projects onto any command's sign convention and shows up as fake fractional tracking; only sign-antisymmetry under command reversal distinguishes a feedback response to the command from an open-loop offset.
Applies when
- evaluating turn/sidewalk/any signed-command tracking percentages
- a candidate shows partial tracking on an axis it was never trained on
- writing PASS criteria for a new directional skill
“C2/C3 那些非零的 wz 百分比不是转向能力 —— 转向+ 与 转向− 的实测同号（s1e：cmd +0.3 → +0.084，cmd −0.3 → +0.093 rad/s），那是恒定偏航偏置。… 三个候选都不会转、都不会侧走。”
train/C_LADDER_RUN.md § 0. 读数纠正（重要，别引错） The smoke watcher panicked at the wrong operating point and its score goes blind when gates saturate - treat it as a survival sentinel, not a judge
smoke-watcher-operating-pointConfigure every automated evaluator at the lineage's declared deployment operating point, give it graded metrics that cannot saturate, and until then scope its authority to catastrophe-detection - never let a mis-configured watcher stop or rank a rung on its own.
Symptom
Two watcher misfires in one ladder: (1) during the friction rung the watcher (evaluating at kd 1.0) reported panic-level 1/3 survival from iter 3300 - falsified by the official kd 1.2 scan, because the lineage's design operating point was kd 1.2 and the watcher lacked the --kd-scale passthrough; (2) during the PD rung the watcher's early-stop score froze at iter 1050 despite ongoing drift improvements, because with all eight gates passing (constant 0/3 failures) the score has no gradient left - "八门全过恒 0/3 时 score 对漂移改善盲, s1f 课文三现".
Context
Both are the same category: the in-training smoke loop is an instrument with its own configuration (operating point, score design), and its verdicts are only as aligned as that configuration. The booked doctrine: "冒烟只当存活哨兵" - until the watcher evaluates at the deployment operating point with graded metrics, its role is detecting catastrophes, not ranking checkpoints; ranking belongs to the full battery at the design operating point (and the watcher's scoring was separately patched to weight survival 3x so recoveries during hard phases are not early-stopped away).
Change
Watcher debt booked (--kd-scale passthrough); score saturation acknowledged with graded columns planned; selection authority kept with 20-seed batteries at the declared operating point.
Outcome
A false panic did not abort a rung that was actually passing at its design point; a frozen score did not hide real drift gains; the instrument's authority was scoped to what its configuration can actually see.
Mechanism
An evaluator is itself configured (gain profile, delay, metrics); evaluating a policy away from its design operating point measures a counterfactual robot, and bounded scores saturate once binary gates pass, losing all sensitivity. Instruments need the same operating-point discipline as deployments and graded outputs to retain gradient.
Applies when
- an automated smoke loop contradicts the official battery
- early-stop scores freeze while graded metrics still improve
- lineages with non-default deployment gain/delay profiles
“watcher (kd1.0 口径) 3300 起 1/3 恐慌被 kd1.2 正式扫描证伪为考纲外假象 —— 工作点评测口径教训: watch_ckpt 缺 --kd-scale 透传 (待补), 冒烟只当存活哨兵。… watcher score 饱和误停 @1050(八门全过恒 0/3 时 score 对漂移改善盲, s1f 课文三现)”
train/README.md § omni_s2e_fric (watcher 恐慌被证伪) / omni_s2e_pd (500 臂) The restart reward table lists a reason for every term AND a lesson for every exclusion - absent terms are removed, not zero-weighted
minimal-reward-table-with-provenanceMaintain the reward table as an evidence ledger: every term cites the episode that justifies it, every excluded term cites the episode that convicted it (including the development stage it is valid at), and retired terms are deleted from the config, never left at weight zero.
Symptom
Seven walk generations had accumulated an entangled reward table where nobody could say which term earned its place; the restart needed a table that could be audited line by line.
Context
The minimal table v2 was built under three written principles: "一项管 一件事、结构性反抬脚的项一个不留、塑形只留一套相位逻辑;不在表里的一律 不加" (one term per job; zero structurally-anti-lift terms; exactly one phase-shaping logic; nothing outside the table gets added). Every row carries its provenance (e.g. base_height target = standing height cites the v4 crouch lesson; split x/y tracking cites the merged-exp gradient hole; world-frame yaw cites the v1/v3 body-frame lesson). Every EXCLUSION carries its same-type precedent: feet_landing_vel out because it is poison while the gait is unformed (drag pays 0, lifting pays - the v4-clearance / v8a-B "reverse threshold" family) though it was fine in v7 when the gait already existed - term validity depends on developmental stage; feet_air_time out with its measured non-lever evidence (v6 had it at 2.0 and still lifted 4 mm); and replaced terms are REMOVED from the config ("置 None,不是权重 0 挂着") so audits see truth, not dormant weight.
Change
Reward table rebuilt as ~20 rows each with weight + provenance column; exclusion list maintained alongside with the falsifying episode for each; dormant terms deleted rather than zeroed.
Outcome
Later revisions (S1.2/S1.3) modified the table by citing and updating specific rows' evidence rather than re-arguing the whole design; the table doubled as the lineage's reward-lesson index.
Mechanism
A reward table is a set of standing hypotheses; attaching each row's evidence makes revisions targeted and reversible, and recording why a term is absent prevents the cycle of re-adding known poisons. Deleting vs zero-weighting matters because config audits and DR interactions see the term either way - a zero-weight term is dormant complexity waiting to be flipped on wrongly.
Applies when
- designing a reward table for a restart or new task
- someone proposes re-adding a previously removed term
- auditing which reward rows still earn their place
“原则:一项管一件事、结构性反抬脚的项一个不留、塑形只留一套相位逻辑;不在表里的一律不加 … feet_landing_vel(评审 #4):拖地时代价恒 0、抬脚才收费——与 v4-clearance/v8a-B 同属「反抬脚门槛」家族,步态未成形时是毒;v7④ 加它时步态已存在。… 已从 cfg 移除(置 None),不是权重 0 挂着。”
train/OMNI_V0_SPEC.md § 3. 最小奖励表 v2 / 明确不带 Add a termination that makes the degenerate strategy fatal - no height cut-off meant crouch-shuffling could live forever
termination-closes-degenerate-basinFor each known degenerate strategy, check whether the termination set makes it fatal; if the robot can live indefinitely inside the degenerate posture, add a termination just past the intended operating envelope rather than escalating penalties.
Symptom
Crouched foot-dragging survived indefinitely because the termination set contained only bad_orientation (40 deg) and base contact - there was no height termination at all, so a deep squat was a viable long-term strategy.
Context
The hypothesis audit found the missing termination (hypothesis 7); the cross-check against published configs found the field practice: Booster terminates at 0.45 m (38% of body height) and the research warning is that the termination height must not be so low that crouching survives it. The proposed value: 0.32 m, just below the walk crouch base height 0.3739 - a deep squat terminates immediately, "断掉蹲着蹭的活路" (cutting off the crouch-shuffle's livelihood).
Change
Add height termination at 0.32 m as a second-priority item of the walk fix package, alongside restoring base_height_l2 to -10.
Outcome
Entered the v5/v6 fix package under which the crouch-shuffle optimum disappeared (34 mm clearance, 87% tracking by v6).
Mechanism
Termination conditions define which strategies exist at all: a reward penalty prices a behavior, but a termination deletes its future returns entirely. Degenerate basins that are merely penalized can remain optimal under enough tracking pressure; a termination placed between the degenerate posture and the intended one makes the basin unreachable as a steady state.
Applies when
- a degenerate but stable behavior persists across reward tunings
- auditing termination conditions for a locomotion task
- a policy exploits the gap between penalized and terminated states
“加终止高度:研究第 6 条"终止高度不能低到让蹲着也能活"。我们完全没有高度终止。建议 0.32 m(略低于 walk 蹲姿基座高 0.3739,深蹲即终止)。… 加终止高度 0.32 m(深蹲即终止,断掉蹲着蹭的活路)”
train/WALK_DIAGNOSIS.md § 修正 ④ / 最终改动清单 第二优先 The latency DR range must cover the measured deployment pipeline - 0-20 ms could not even reach the real 1-2 control steps
latency-dr-covers-measured-pipelineMeasure end-to-end action latency in control steps on your own stack (including cross-process queue boundaries), set the DR range to cover it with margin, and never import a delay count without its control frequency.
Symptom
Action latency was randomized over 0-20 ms (0-1 control step at 50 Hz), but the measured deployment path is 1-2 steps: the deploy process writes the target, an independently running BusWorker picks it up on its NEXT cycle, plus CAN round-trip - the training range could not cover the robot's actual latency at all.
Context
Fix: widen action_latency_s to 0-0.06 (0-3 steps). The external reference's "uniform 6 steps" was explicitly NOT copied - that number depends on his unknown control frequency; locally, a sweep at 0/1/2/3 steps showed walk_v5 survives all with insensitive metrics, so 6 steps "在我们这里没有依据" (has no local basis). The range was set from the measured pipeline with margin, not from a foreign constant.
Change
action_latency_s (0, 0.02) -> (0, 0.06), justified by pipeline analysis (writer/worker cycle boundary + bus time) and bounded by the local latency sweep.
Outcome
The DR band now brackets the true deployment latency; the policy trains against the delay it will actually face instead of a fictional sub-step world.
Mechanism
Latency DR only immunizes against delays inside its support; a range below the physical pipeline guarantees an untrained distribution shift at deployment. The correct range comes from tracing the pipeline's worst case (queueing boundaries + transport), and foreign step-counts are meaningless without the control rate they were measured at.
Applies when
- setting or auditing action-delay randomization
- deployment uses a separate bus/worker process from the policy loop
- importing delay-modeling numbers from other projects
“现行 0~20 ms = 0~1 个 50Hz 控制步, 而实测部署链路是 1~2 步(deploy 写 STATE.target 后, 独立跑的 BusWorker 下一轮才取走下发, 再加 CAN 往返)——现在的区间覆盖不到真机的实际延迟。… 不照抄参考来源的"统一 6 步": 那取决于他的控制频率(未知), 而我们扫过 0/1/2/3 步 … 6 步在我们这里没有依据。”
train/WALK_V7_SPEC.md § ⑤ action_latency_s 0~0.02 → 0~0.06